Regulating cathode surface hydroxyl chemistry enables superior potassium storage.

Potassium vanadium fluorophosphate (KVPO4F) is regarded as a promising cathode candidate for potassium-ion batteries due to its high working voltage and satisfactory theoretical capacity. However, the usage of electrochemically inactive binders and redundant current collectors typically results in inferior electrochemical performance and low energy density, thus implying the important role of rational electrode structure design. Herein, we have reported a scalable and cost-effective synthesis of a cellulose-derived KVPO4F self-supporting electrode, which features a special surface hydroxyl chemistry, three-dimensional porous and conductive framework, as well as super flexible and stable architecture. The cellulose not only serves as a flexible substrate, a pore-forming agent, and a versatile binder for KVPO4F/conductive carbon but also enhances the K-ion migration ability. Benefiting from the special hydroxyl chemistry-induced storage mechanism and electrode structural stability, the flexible freestanding KVPO4F cathode exhibits high-rate performance (53.0% capacity retention with current densities increased 50-fold, from 0.2 C to 10 C) and impressive cycling stability (capacity retention up to 74.9% can be achieved over 1,000 cycles at a rate of 5 C). Such electrode design and surface engineering strategies, along with a deeper understanding of potassium storage mechanisms, provide invaluable guidance for better electrode design to boost the performance of potassium-ion energy storage systems.

Engineering Biodegradable Polyurethanes with Precisely Controlled Hierarchical Structures to Access Shape Memory Effect and Enhanced Bioactivities.

Biodegradable polymers with shape memory effects (SMEs) offer promising solutions for short-term medical interventions, facilitating minimally invasive procedures and subsequent degradation without requiring secondary surgeries. However, achieving a good balance among desirable SMEs, mechanical performance, degradation rate, and bioactivities remains a significant challenge. To address this issue, we established a strategy to develop a versatile biodegradable polyurethane (PPDO-PLC) with tunable hierarchical structures via precise chain segment control. Initial copolymerization of l-lactide and ε-caprolactone sets a tunable Tg close to body temperature, followed by block copolymerization with poly(p-dioxanone) to form a hard domain. This yields a uniform microphase-separation morphology, ensuring robust SME and facilitating the development of roughly porous surface structures in alkaline environments. Cell experiments indicate that these rough surfaces significantly enhance cellular activities, such as adhesion, proliferation, and osteogenic differentiation. Our approach provides a methodology for balancing biodegradability, SMEs, three-dimensional (3D) printability, and bioactivity in materials through hierarchical structure regulation.

Tandem Efficient Bromine Removal and Silver Recovery by Resorcinol-Formaldehyde Resin Nanoparticles.

Halogen wastewater greatly threatens the health of human beings and aquatic organisms due to its severe toxicity, corrosiveness, and volatility. Efficient bromine removal is therefore urgently required, while existing Br2-capture materials often face challenges from limited water stability and possible halogen leaking. We report a facile and efficient aqueous Br2 removal method using submicron resorcinol-formaldehyde (RF) resin nanoparticles (NPs). The abundant aromatic groups dominate the Br2 removal by substitution reactions. An excellent Br2 conversion capacity of 7441 mg gRF-1 was achieved by RF NPs that outperform state-of-the-art materials by ∼2-fold, along with advantages including good water stability, low cost, and easy fabrication. Two recycling-coupled (electrochemical or H2O2-involved) Br2 removal routes further reveal the feasibility of in-depth halogen removal by RF NPs. The brominated resin can be downstream upcycled for silver recovery, realizing the harvesting of precious metal, reducing of heavy-metal pollution, and resource utilization of brominated resin.

Analysis of the relationship between oipA, babA2, babB genotypes and helicobacter pylori-related gastric precancerous lesions.

OBJECTIVE: To investigate the distribution of helicobacter pylori-related genotypes of oipA, babA2, and babB in patients with gastrointestinal diseases. Methods: The retrospective study was conducted at the Jiamusi College, Heilongjiang University of Traditional Chinese Medicine, Harbin, China, and comprised data from February 2017 to May 2020 of patients of either gender 20-80 years who underwent gastroscopy. An instrument based on polymerase chain reaction was used to amplify oipA, babA2 and babB genes, and their distribution in terms of gender, age and pathological types was analysed. RESULTS: Among the 116 patients, 52(44.8%) had oipA genotype, 48(41.2%) babA2, and 72 (62.1%) babB, respectively, and the size of amplified products of 486bp, 219bp and 362bp, respectively. The infection rate of oipA and babB genotypes was highest [26(50.0%) and 31(43.1%)]in those aged 61-80 years, and lowest [9(17.3%) and 15(20.8%)]in those aged 20-40 years. The infection rate of babA2 genotype was highest [23(47.9%)] in those aged 41-60 years, and lowest [12(25.0%)] in those aged 61-80 years. Male patients were under a higher [28(53.9%) and 26(54.2%)] rate of infection with oipA and babA2, and female patients has a higher [40(55.6%)] rate of infection with babB. Among Hp-infected patients with digestive diseases, babB genotype was mainly found in patients with chronic superficial gastritis[17(58.6%)], duodenal ulcer[17(85.0%)], chronic atrophic gastritis[19(59.4%)] and gastric ulcer[16(72.7%)], while oipA genotype was mainly found in patients with gastric cancer[8(61.5%)]. CONCLUSIONS: Chronic superficial gastritis, duodenal ulcer, chronic atrophic gastritis, and gastric ulcer may have a close bearing on babB genotype infection, while oipA genotype infection may be associated with gastric cancer.

Perovskite Films Regulation via Hydrogen-Bonded Polymer Network for Efficient and Stable Perovskite Solar Cells.

Perovskite solar cells (PSCs) are considered as a promising photovoltaic technology due to their high efficiency and low cost. However, their long-term stability, mechanical durability, and environmental risks are still unable to meet practical needs. To overcome these issues, we designed a multifunctional elastomer with abundant hydrogen bonds and carbonyl groups. The chemical bonding between polymer and perovskite could increase the growth activation energy of perovskite film and promote the preferential growth of high-quality perovskite film. Owing to the low defect density and gradient energy-level alignment, the corresponding device exhibited a champion efficiency of 23.10 %. Furthermore, due to the formation of the hydrogen-bonded polymer network in the perovskite film, the target devices demonstrated excellent air stability and enhanced flexibility for the flexible PSCs. More importantly, the polymer network could coordinate with Pb2+ ions, immobilizing lead atoms to reduce their release into the environment. This strategy paves the way for the industrialization of high-performance flexible PSCs.

Homochiral Dodecanuclear Lanthanide "Cage in Cage" for Enantioselective Separation.

It is extremely difficult to anticipate the structure and the stereochemistry of a complex, particularly when the ligand is flexible and the metal node adopts diverse coordination numbers. When trivalent lanthanides (LnIII) and enantiopure amino acid ligands are utilized as building blocks, self-assembly sometimes yields rare chiral polynuclear structures. In this study, an enantiopure carboxyl-functionalized amino acid-based ligand with C3 symmetry reacts with lanthanum cations to give a homochiral porous coordination cage, (Δ/Λ)12-PCC-57. The dodecanuclear lanthanide cage has an unprecedented octahedral "cage-in-cage" framework. During the self-assembly, the chirality is transferred from the enantiopure ligand and fixed by the binuclear lanthanide cluster to give 12 metal centers that have either Δ or Λ homochiral stereochemistry. The cage exhibits excellent enantioselective separation of racemic alcohols, 2,3-dihydroquinazolinones, and multiple commercially available drugs. This finding exhibits a rare example of a multinuclear lanthanide complex with a dual-walled topology and homochirality. The highly ordered self-assembly and self-sorting of flexible amino acids and lanthanides shed light on the chiral transformation between different complicated artificial systems that mimic natural enzymes.

The 14-3-3η/GSK-3ß/ß-catenin complex regulates EndMT induced by 27-hydroxycholesterol in HUVECs and promotes the migration of breast cancer cells.

Endothelial-mesenchymal transition (EndMT) is the transformation of endothelial cell morphology to mesenchymal cell morphology, accompanied by decline of endothelial function and enhancement of mesenchymal function, which promotes tumor progression and tumor cell invasion and metastasis. 27-Hydroxycholesterol (27-HC) is a cholesterol metabolite, which has a high content in human blood. 27-HC promotes breast cancer cell proliferation, invasion, and migration. We previously showed that 27-HC promotes EndMT; however, the underlying mechanism still needs to be further explored. We studied the role of the 14-3-3η/GSK-3ß/ß-catenin complex in EndMT. Our results show that 27-HC induces oxidative stress in HUVECs and activates the p38 signaling pathway, thereby inhibiting the binding of 14-3-3η/GSK-3ß/ß-catenin, promoting the increase of free ß-catenin and nuclear translocation, and finally inducing EndMT. Treatment with N-acetylcysteine (NAC) blocked 27-HC-induced ROS generation and p38 signaling pathway activation, prevented ß-catenin from release from binding, and inhibited EndMT. Blocking ROS production or p38 signaling or knocking down 14-3-3η inhibited 27-HC-induced EndMT and inhibited breast cancer cell metastasis. These findings indicate 14-3-3η is necessary for interactions between the p38 kinase and the GSK-3ß/ß-catenin complex and serves as an adaptor to transmit the upstream kinase signal to the downstream signal, thereby promoting EndMT and breast cancer cell migration.

A Review on Liquid Crystal Polymers in Free-Standing Reversible Shape Memory Materials.

Liquid crystal polymers have attracted massive attention as stimuli-responsive shape memory materials due to their unique reversible large-scale and high-speed actuations. These materials can be utilized to fabricate artificial muscles, sensors, and actuators driven by thermal order-disorder phase transition or trans-cis photoisomerization. This review collects most commonly used liquid crystal monomers and techniques to macroscopically order and align liquid crystal materials (monodomain), highlighting the unique materials on the thermal and photo responsive reversible shape memory effects. Challenges and potential future applications are also discussed.

Interaction of renin-angiotensin system and adenosine monophosphate-activated protein kinase signaling pathway in renal carcinogenesis of uninephrectomized rats.

Renin-angiotensin system and adenosine monophosphate-activated protein kinase signaling pathway both play important roles in carcinogenesis, but the interplay of renin-angiotensin system and adenosine monophosphate-activated protein kinase in carcinogenesis is not clear. In this study, we researched the interaction of renin-angiotensin system and adenosine monophosphate-activated protein kinase in renal carcinogenesis of uninephrectomized rats. A total of 96 rats were stratified into four groups: sham, uninephrectomized, and uninephrectomized treated with angiotensin-converting enzyme inhibitor or angiotensin receptor blocker. Renal adenosine monophosphate-activated protein kinase and its downstream molecule acetyl coenzyme A carboxylase were detected by immunohistochemistry and western blot at 10 months after uninephrectomy. Meanwhile, we examined renal carcinogenesis by histological transformation and expressions of Ki67 and mutant p53. During the study, fasting lipid profiles were detected dynamically at 3, 6, 8, and 10 months. The results indicated that adenosine monophosphate-activated protein kinase expression in uninephrectomized rats showed 36.8% reduction by immunohistochemistry and 89.73% reduction by western blot. Inversely, acetyl coenzyme A carboxylase expression increased 83.3% and 19.07% in parallel to hyperlipidemia at 6, 8, and 10 months. The histopathology of carcinogenesis in remnant kidneys was manifested by atypical proliferation and carcinoma in situ, as well as increased expressions of Ki67 and mutant p53. Intervention with angiotensin-converting enzyme inhibitor or angiotensin receptor blocker significantly prevented the inhibition of adenosine monophosphate-activated protein kinase signaling pathway and renal carcinogenesis in uninephrectomized rats. In conclusion, the novel findings suggest that uninephrectomy-induced disturbance in adenosine monophosphate-activated protein kinase signaling pathway resulted in hyperlipidemia and carcinogenesis in tubular epithelial cells, which may be largely attenuated by renin-angiotensin system blockade, implying the interaction of renin-angiotensin system and adenosine monophosphate-activated protein kinase signaling pathway in renal carcinogenesis of uninephrectomized rats.

New Strategy to Access Dual-Stimuli-Responsive Triple-Shape-Memory Effect in a Non-overlapping Pattern.

Multistimuli-responsive shape-memory polymers are highly desirable in various applications, and numerous modes have been developed in recent years. However, most of them need to reprogram before they are ready to respond to another stimulus while one is triggered. Here, a new strategy is developed to achieve dual-stimuli-responsive triple-shape memory with non-overlapping effect in one programming cycle. Here, a series of poly(l-lactide)-poly(tetramethylene oxide) glycol copolymers (PLA-PTMEG-A) is prepared by selected dangling photoresponsive anthracene moieties on the crystalline PTMEG backbone. The architectures of the copolymers are well-controlled in order to keep a good balance between the crystallinity of the soft segment and the mobility of the anthracene moieties. Thus, PLA-PTMEG-A's can respond to heat and light with non-overlapping effect. The thermally-induced shape-memory effect (TSME) is realized by the crystallization-melting transition of PTMEG soft segments, while the light-induced shape-memory effect (LSME) is achieved by the reversible photodimerization of anthracene groups. In view of the non-overlapping effect of TSME and LSME in the copolymers, a triple-shape-memory effect triggered by dual-stimuli is realized in one programming and recovery cycle.

[Influence and mechanism of PinX1 gene on the chemotherapy sensitivity of nasopharyngeal carcinoma cells in response to Cisplatin].

OBJECTIVE: To explore the influence and mechanism of PinX1 gene on the chemotherapy sensitivity of nasopharyngeal carcinoma cells in response to Cisplatin. METHODS: Transfected nasopharyngeal carcinoma 5-8F cell lines with pCDH-CMV-PinX1-copGFP vector constructed by lentivirus to generate Lenti-PinX1-5-8F cells containing PinX1 gene, using Lenti-Ctrl-5-8F cell (blank vector without PinX1 gene was used to transfect 5-8F cell lines) and 5-8F cell as controls. Expression of PinX1 gene, telomerase activity, the inhibition of cancer cells proliferation, combined anticancer effect with Cisplatin and the expression of lung resistance protein (LRP) and Bcl-2 were detected with fluorescent quantitation polymerase chain reaction (PCR), flow cytometry, thiazolyl blue (MTT) method, areole test, Western blot and drug sensitivity test, respectively, in four groups (Lenti-PinX1-5-8F cell + Cisplatin, Lenti-PinX1-5-8F cell, Cisplatin and 5-8F cell) so as to explore the influence and mechanism of PinX1 gene on the chemotherapy sensitivity of nasopharyngeal carcinoma cells in response to Cisplatin. RESULTS: The telomerase activity in Lenti-PinX1-5-8F cell (0.146 ± 0.004) was lower than those in the other two control cells (Lenti-Ctrl-5-8F cell: 0.967 ± 0.016, 5-8F cell: 1.000 ± 0.034, both P < 0.01). The cancer cell biological activity could be intensively inhibited by 16 µg/ml Cisplatin after lower level telomerase activity induced by PinX1 gene. Proliferation index (PI) (%) in Lenti-PinX1-5-8F cell + Cisplatin (14.39 ± 3.66) was also less than the other groups (Lenti-PinX1-5-8F cell, Cisplatin and 5-8F cell groups, 32.97 ± 3.00, 31.18 ± 4.24 and 47.19 ± 4.19, all P < 0.01). And same time, the expressions of LRP (0.64 ± 0.14) and Bcl-2 (0.57 ± 0.12) protein in Lenti-PinX1-5-8F cells were obviously reduced than those in other two group cells (Lenti-Ctrl-5-8F cell: 0.84 ± 0.19 and 0.81 ± 0.16; 5-8F cell: 0.83 ± 0.35 and 0.78 ± 0.27; all P < 0.01). CONCLUSIONS: PinX1 gene can enhance the chemotherapy sensitivity of nasopharyngeal carcinoma cells in response to Cisplatin, which may be mediated by the down-regulation of telomerase activity and the inhibition of LRP and Bcl-2 gene in nasopharyngeal carcinoma cells.

Simultaneously Regulating Electrochemical Corrosion Behavior and Wettability of Magnesium-Neodymium Alloy by Self-Layered Chemical Conversion Coating.

Rapid corrosion in aqueous solutions of magnesium alloys is one of the major obstacles to their wide application, and coating plays a crucial role in their corrosion protection. Recently, protection- and function-integrated coatings have attracted much attention in the research field of magnesium alloys. In this work, a simple chemical conversion process is proposed to fabricate a composite coating on a magnesium-neodymium alloy through immersion in an aqueous solution made of Ca(OH)2 and NaHCO3. After the immersion process, a coating consisting of two spontaneously formed layers is acquired. The top flower-like layer is composed of Mg5(OH)2(CO3)4∙4H2O, Mg(OH)2 and CaCO3, and the inner dense layer is speculated to be Mg(OH)2. Electrochemical impedance spectroscopy, polarization tests, and hydrogen evolution are combined to evaluate the corrosion resistance in simulated body fluid, simulated seawater solution, and simulated concrete pore solution, which reveals that the coated sample has better corrosion resistance than the uncoated one. After the coated sample is modified with fluorinated silane, a water-repellent surface can be achieved with an average water contact angle of 151.74° and a sliding angle of about 4°. Therefore, our results indicate that effective corrosion protection and potential self-cleaning ability have been integrated on the surface of the magnesium alloy in this study. In addition, the formation mechanism of the self-layered coating is discussed from the viewpoint of the interaction between the substrate and its external solution.

Chaotropic Ions Mediated Polymer Gelation for Thermal Management.

Energy and environmental issues have increasingly garnered significant attention for sustainable development. Flexible and shape-stable phase change materials display great potential in regulation of environmental temperature for energy saving and human comfort. Here, inspired by the water absorption behavior of salt-tolerant animals and plants in salinity environment and the Hofmeister theory, highly stable phase change salogels (PCSGs) are fabricated through in situ polymerization of hydrophilic monomers in molten salt hydrates, which can serve multiple functions including thermal management patches, smart windows, and ice blocking coatings. The gelation principles of the polymer in high ion concentration solution are explored through the density functional theory simulation and verified the feasibility of four types of salt hydrates. The high concentration chaotropic ions strongly interacted with polymer chains and promoted the gelation at low polymer concentrations which derive highly-stable and ultra-moisturizing PCSGs with high latent heat (> 200 J g-1). The synergistic adhesion and transparency switching abilities accompanied with phase transition enable their smart thermal management. The study resolves the melting leakage and thermal cycling stability of salt hydrates, and open an avenue to fabricate flexible PCM of low cost, high latent heat, and long-term durability for energy-saving, ice-blocking, and thermal management.

27-Hydroxycholesterol induces liver fibrosis via down-regulation of trimethylation of histone H3 at lysine 27 by activating oxidative stress; effect of nutrient interventions.

BACKGROUND: Chronic liver injury caused by activation of hepatic stellate cells (HSCs) is a key event in the development of liver fibrosis (LF). A high-cholesterol diet can prompt accumulation of free cholesterol in HSCs, which promotes HSC activation and progression of LF. OBJECTIVE: 27-Hydroxycholesterol (27HC) is the most abundant cholesterol metabolite. Here, we investigated whether the HSC activation and LF induced by high cholesterol is caused by its metabolite 27HC, and whether TGFß classical signaling were involved in these processes. METHODS: In vitro, LX2 and HSC-T6 cells were used to explore the effects of 27HC on activation of HSCs, while LSECs were used to observe the effects of 27HC on capillarization. In vivo, zebrafish were used to assess the effect of 27HC on LF. RESULTS: The cholesterol metabolite 27HC promoted the proliferation of HSCs and up-regulated expression of COL-1 and α-SMA as well as CTGF and TIMP1. Also, 27HC up-regulated expression of Smad2/3 and phosphorylated Smad2/3 in HSCs. Furthermore, 27HC-induced up-regulation of COL-1, α-SMA, CTGF, and TIMP1 protein levels was inhibited by Smad2/3 knockout. In addition, 27HC down-regulated H3K27me3 by inhibition of EZH2 and promotion of UTX and JMJD3 expression via the TGFß signaling, thereby inducing activation of HSCs. Notably, 27HC significantly aggravated the pathological damage induced by DEN, and induced deposition of collagen fibers in zebrafish liver. Folic acid (FA) and resveratrol (RES) both reduced 27HC-induced production of reactive oxygen species (ROS) and inhibited the effects of TGFß signaling on EZH2, UTX, and JMJD3, thereby increasing H3K27me3, and finally jointly inhibiting LF. CONCLUSION: Cholesterol is metabolized to 27HC, which mediates activation of HSCs and onset of LF. Reduced expression of H3k27me3 by TGFß signaling is crucial to 27HC-induced LF. FA and RES ameliorated activation of HSCs and LF by reducing 27HC-induced production of ROS and regulating of H3K27me3.

A Comprehensive Research Review of Herbal Textual Research, Phytochemistry, Pharmacology, Traditional Uses, Clinical Application, Safety Evaluation, and Quality Control of Trollius chinensis Bunge.

Trollius chinensis Bunge (TCB) is a perennial plant of the Ranunculaceae family with medicinal and edible values. It is widely distributed and commonly used in various regions, including Asia, Europe, and North America. The main chemical components of TCB include alkaloids, flavonoids, phenolic acids, and volatile oil compounds. TCB is renowned for its anti-inflammatory, heat-clearing, detoxifying, and eyesight-improving properties. Its dried flowers are commonly used as a traditional Chinese medicine indicated for the treatment of upper respiratory tract infections, chronic tonsillitis, pharyngitis, influenza, and bronchitis. Modern pharmacology has demonstrated the anti-cancer, anti-inflammatory, antihypertensive, and antioxidant effects of TCB. This study presents a comprehensive overview of various aspects of TCB, including herbal textual research, botany, phytochemistry, pharmacology, traditional uses, clinical application, and quality control, aiming to provide new ideas on the scientific application of TCB as well as the integration of modern research with traditional medicinal uses.

Shape Memory Polyester Scaffold Promotes Bone Defect Repair through Enhanced Osteogenic Ability and Mechanical Stability.

Bone tissue engineering involving scaffolds is recognized as the ideal approach for bone defect repair. However, scaffold materials exhibit several limitations, such as low bioactivity, less osseointegration, and poor processability, for developing bone tissue engineering. Herein, a bioactive and shape memory bone scaffold was fabricated using the biodegradable polyester copolymer's four-dimensional fused deposition modeling. The poly(ε-caprolactone) segment with a transition temperature near body temperature was selected as the molecular switch to realize the shape memory effect. Another copolymer segment, i.e., poly(propylene fumarate), was introduced for post-cross-linking and improving the regulation effect of the resulting bioadaptable scaffold on osteogenesis. To mimic the porous structures and mechanical properties of the native spongy bone, the pore size of the printed scaffold was set as ∼300 µm, and a comparable compression modulus was achieved after photo-cross-linking. Compared with the pristine poly(ε-caprolactone), the scaffold made from fumarate-functionalized copolymer considerably enhanced the adhesion and osteogenic differentiation of MC3T3-E1 cells in vitro. In vivo experiments indicated that the bioactive shape memory scaffold could quickly adapt to the defect geometry during implantation via shape change, and bone regeneration at the defect site was remarkably promoted, providing a promising strategy to treat bone defects in the clinic, substantial bone defects with irregular geometry.

4D Printing of Biocompatible Scaffolds via In Situ Photo-crosslinking from Shape Memory Copolyesters.

The complexity of surgical treatments for large-area soft tissue injuries makes placing large implants into injury sites challenging. Aliphatic polyesters are often used for scaffold preparation in tissue engineering owing to their excellent biodegradability and biocompatibility. Scaffolds with shape-memory effect (SME) can also avoid large-volume trauma during the implantation. However, the complexity and diversity of diseases require more adaptable and precise processing methods. Four-dimensional (4D) printing, a booming smart material additive manufacturing technology, provides a new opportunity for developing shape memory scaffolds. With the aim of personalized or patient-adaptable soft tissues such as blood vessels, we developed a feasible strategy for fabricating scaffolds with fine architectures using 4D printing crosslinkable shape memory linear copolyesters using fused deposition modeling (FDM). To overcome the weak bonding strength of each printed layer during FDM, a catalyst-free photo-crosslinkable functional group derived from biocompatible cinnamic acid was embedded into the linear copolyesters as in situ crosslinking points during FDM printing. Under ultraviolet-assisted irradiation, the resulting 4D scaffold models demonstrated excellent SME, desirable mechanical performance, and good stability in a water environment owing to the chemical bonding between each layer. Moreover, the excellent biocompatibility of the scaffold was evaluated in vitro and in vivo. The developed composite scaffolds could be used for minimally invasive soft tissue repair.

Fabricating Freestanding, Broadband Reflective Cholesteric Liquid-Crystal Networks via Topological Tailoring of the Sm-Ch Phase Transition.

Numerous biological systems in nature provide much inspiration for humanity to master diverse coloration strategies for creating stimuli-responsive materials and display devices, such as to access gorgeous structural colors from well-defined photonic structures. Cholesteric liquid crystals (CLCs) are a fascinating genre of photonic materials displaying iridescent colors responsive to circumstance changes; however, it is still a big challenge to design materials with broadband color variation as well as good flexibility and freestanding capacity. Herein, we report a feasible and flexible strategy to fabricate cholesteric liquid-crystal networks (CLCNs) with precise colors across the entire visible spectrum through molecular structure tailoring and topology engineering and demonstrate their application as smart displays and rewritable photonic paper. Influences of chiral and achiral LC monomers on the thermochromic behaviors of CLC precursors as well as on the topology of the polymerized CLCNs are systematically investigated, demonstrating that the monoacrylate achiral LC facilitated the formation of a smectic phase-chiral phase (Sm-Ch) pretransitional phase in the CLC mixture and improved the flexibility of the photopolymerized CLCNs. High-resolution multicolor patterns in one CLCN film are generated through photomask polymerization. In addition, the freestanding CLCN films show perceivable mechanochromic behaviors and repeated erasing-rewriting performances. This work opens avenues toward the realization of pixelated colorful patterns and rewritable CLCN films promising in technology fields ranging from information storage and smart camouflage to anti-counterfeiting and smart display.

Enantioseparation in Hierarchically Porous Assemblies of Homochiral Cages.

Efficient enantioselective separation using porous materials requires tailored and diverse pore environments to interact with chiral substrates; yet, current cage materials usually feature uniform pores. Herein, we report two porous assemblies, PCC-60 and PCC-67, using isostructural octahedral cages with intrinsic microporous cavities of 1.5 nm. The PCC-67 adopts a densely packed mode, while the PCC-60 is a hierarchically porous assembly featuring interconnected 2.4 nm mesopores. Compared with PCC-67, the PCC-60 demonstrates excellent enantioselectivity and recyclability in separating racemic diols and amides. This solid adsorbent PCC-60 is further utilized as a chiral stationary phase for high-performance liquid chromatography (HPLC), enabling the complete separation of six valuable pharmaceutical intermediates. According to quantitative dynamic experiments, the hierarchical pores facilitate the mass transfer within the superstructure, shortening the equilibrium time for adsorbing chiral substrates. Notably, this hierarchically porous material PCC-60 indicates remarkably higher enantiomeric excess (ee) values in separating racemates than PCC-67 with uniform microporous cavities. Control experiments confirm that the presence of mesopores enables the PCC-60 to separate bulky substrates. These results uncover the traditionally underestimated role of hierarchical porosity in porous-superstructure-based enantioseparation.

Characterization of electrospun poly(p-dioxanone) and poly(p-dioxanone)/clay nanocomposite fibers.

PPDO was successfully electrospun into continuous, ultrafine fibers by using DMSO as solvent for the first time. The concentration of PPDO in DMSO and the electrospinning temperature were optimized. PPDO/LAP nanocomposites were also electrospun in DMSO. At 70 degrees C, ultrafine PPDO fibers were obtained from 35 wt% solution and the PPDO/LAP nanocomposite fibers were yielded from 55 wt% solution. Electrospun fibers of the PPDO/LAP nanocomposites showed higher degree of crystallinity due to the presence of embedded nanoparticles.