RESUMEN
The laser performance of a high-power ytterbium-doped fiber amplifier is mainly hindered by the onset of mode instability. In this work, the slope efficiency and mode instability threshold of the ytterbium-doped fiber under various gamma-ray radiation doses have been measured. Experimental results reveal that gamma-ray radiation-induced photodarkening degrades mode instability severely, and gamma-ray radiation-induced mode instability degradation can be partly bleached by hours of pump-light injection. It is shown that gamma-ray radiation-induced photodarkening results in a steep reduction of slope efficiency and mode instability threshold; moreover, the entire irradiated fiber can be partly bleached by hours of pump-light injection and exhibits both time and gamma-ray radiation-dose saturation properties. The experimental results indicate that mode instability mitigation can be partly realized by pump-light injection and implies photodarkening suppression is beneficial for TMI mitigation, which is very promising for the advancement of high-power fiber lasers.
RESUMEN
Tm-doped fiber laser or amplifier can be applied in varied adverse environments. In this work, we demonstrate the pump bleaching of Tm-doped silica fiber with 793nm pump source under gamma-ray irradiation in the range 50Gy-675Gy. The recovery time, the fiber slope efficiency and the fiber cladding absorption spectra after irradiation and bleaching have been measured. It is found that the recovery time and radiation induce absorption are positively associated with doses, however, the fiber slope efficiency of irradiated TDF and bleached TDF are both negatively correlated with doses. Based on the simulation of the fiber core temperature, the probable mechanism of pump bleaching is also discussed.