Dual-dynamic-bond cross-linked injectable hydrogel of multifunction for intervertebral disc degeneration therapy.

Developing smart hydrogels with integrated and suitable properties to treat intervertebral disc degeneration (IVDD) by minimally invasive injection is of high desire in clinical application and still an ongoing challenge. In this work, an extraordinary injectable hydrogel PBNPs@OBG (Prussian blue nanoparticles@oxidized hyaluronic acid/borax/gelatin) with promising antibacterial, antioxidation, rapid gelation, and self-healing characteristics was designed via dual-dynamic-bond cross-linking among the oxidized hyaluronic acid (OHA), borax, and gelatin. The mechanical performance of the hydrogel was studied by dynamic mechanical analysis. Meanwhile, the swelling ratio and degradation level of the hydrogel was explored. Benefiting from its remarkable mechanical properties, sufficient tissue adhesiveness, and ideal shape-adaptability, the injectable PBNPs containing hydrogel was explored for IVDD therapy. Astoundingly, the as-fabricated hydrogel was able to alleviate H2O2-induced excessive ROS against oxidative stress trauma of nucleus pulposus, which was further revealed by theoretical calculations. Rat IVDD model was next established to estimate therapeutic effect of this PBNPs@OBG hydrogel for IVDD treatment in vivo. On the whole, combination of the smart multifunctional hydrogel and nanotechnology-mediated antioxidant therapy can serve as a fire-new general type of therapeutic strategy for IVDD and other oxidative stress-related diseases.

Effect of fit and self-etching adhesive on fiber post retention in endodontically treated teeth.

BACKGROUND: Fiber post (FP) reinforced restoration was widespread in endodontically treated teeth, of which the retention was closely related to fit and operation process. However, the question whether the fit and self-etching adhesive (SED) affect the success of FP restoration still remained unclear. OBJECTIVE: This research aimed to assess how the fit and self-etching adhesive (SED) impact the pull-out bond strength (BS) of glass fiber-reinforced composite posts from the root canal dentin. METHODS: Eighty lower first premolars underwent simulated endodontic treatment, after which their canals were shaped to accommodate a size three RelyX fiber post (FP) (diameter 1.9 mm). They were then divided into 4 equal groups [Unfit post and no SEA (Group UN), Fit post and no SEA (Group FN), Unfit post with SEA (Group UA) and Fit post with SEA (Group FA)] using two different sized FPs and SEA. Cement thickness was acquired by histological analysis and stereomicroscopy. Each sample was tested for pull-out strength through a universal testing machine. Based on the pull-out test, the failure types were observed and scored by visualizing through a stereomicroscope. RESULTS: Group FA demonstrated significantly greater BS compared to Group UN and Group UA, with Group UN showing a statistically significant difference at p< 0.01 and Group UA at p< 0.05. Main failure types in Group FA were Type II, which illustrated that the cement detachment mainly occurred from the post-cement interface. Therefore, Group FA possessed the STRONGEST BS and was most suitable for FP-reinforced crown restorations. CONCLUSIONS: Both the fit and SEA enhanced the pull-out BS. The SEA was critical for BS promotion when the mechanical retention was inadequate.

Fabrication and evaluation of silver modified micro/nano structured titanium implant.

In order to enhance the antibacterial property of titanium implant without inducing obvious cytotoxicity, the combination of Ag nanolayer and micro/nano surface structure was conducted by magnetron sputtering and hot-alkali treatment in this study. A series of specimens (AH-Ti, AH-Ti/Ag0.25, AH-Ti/Ag1, AH-Ti/Ag2, and AH-Ti/Ag5) were prepared with different sputtering durations (0 min, 0.25 min, 1 min, 2 min, 5 min), respectively, all realizing long-term release of Ag+. In vitro experiments indicated that AH-Ti/Ag1 group possessed good cytocompatibility, nice osteogenic ability, and excellent antibacterial efficiency as well. In addition, AH-Ti/Ag0.25 showed good biocompatibility, while the reduction of S.aureus (78.5%) was not enough compared with AH-Ti/Ag1. Although the AH-Ti/Ag2 and AH-Ti/Ag5 group showed superior antibacterial activity, their obvious cytotoxicity caused low ALP and mineralization level. Therefore, the design of suitable Ag nanolayer coating combined with micro/nano surface structure (AH-Ti/Ag1) might be a promising strategy to enhance osteogenic property and maintain excellent antibacterial ability at the same time.

Evaluation of sustained drug release performance and osteoinduction of magnetron-sputtered tantalum-coated titanium dioxide nanotubes.

Modifying the drug-release capacity of titanium implants is essential for maintaining their long-term functioning. Titanium dioxide nanotube (TNT) arrays, owing to their drug release capacity, are commonly used in the biomaterial sphere. Their unique half open structure and arrangement in rows increase the drug release capacity. However, their rapid drug release ability not only reduces drug efficiency but also produces excessive local and systemic deposition of antibiotics. In this study, we designed a tantalum-coated TNT system for drug-release optimization. A decreased nanotube size caused by the tantalum nanocoating was observed through SEM and analyzed (TNT: 110 nm, TNT-Ta1: 80 nm, TNT-Ta3: 40 nm, TNT-Ta5: 20 nm, TNT-Ta7: <5 nm). XPS analysis revealed the distribution of the chemical components, especially that of the tantalum element. In vitro experiments showed that the tantalum nanocoating enhanced cell proliferation; in particular, TNT-Ta5 possessed the best cell viability (about 1.18 of TNT groups at 7d). It also showed that the tantalum nanocoating had a positive effect on osteogenesis (especially TNT-Ta5 and TNT-Ta7). Additionally, hydrophilic/hydrophobic drug (vancomycin/raloxifene) release results indicated that the TNT-Ta5 group possessed the most desirable sustained release capacity. Moreover, in this drug release system, the hydrophobic drug showed more sustained release capacity than the hydrophilic drug (vancomycin: sustained release for more than 48 h, raloxifene: sustained release for more than 168 h). More importantly, TNT-Ta5 is proved to be an appropriate drug release system, which possesses cytocompatibility, osteogenic capacity, and sustained drug release capacity.

Antimicrobial and Pro-Osteogenic Coaxially Electrospun Magnesium Oxide Nanoparticles-Polycaprolactone /Parathyroid Hormone-Polycaprolactone Composite Barrier Membrane for Guided Bone Regeneration.

Introduction: An antibacterial and pro-osteogenic coaxially electrospun nanofiber guided bone regeneration (GBR) membrane was fabricated to satisfy the complicated and phased requirements of GBR process. Methods: In this study, we synthesize dual-functional coaxially electrospun nanofiber GBR membranes by encapsulating parathyroid hormone (PTH) in the core layer and magnesium oxide nanoparticles (MgONPs) in the shell layer (MgONPs-PCL/PTH-PCL). Herein, the physicochemical characterization of MgONPs-PCL/PTH-PCL, the release rates of MgONPs and PTH, and antibacterial efficiency of the new membrane were evaluated. Furthermore, the pro-osteogenicity of the membranes was assessed both in-vitro and in-vivo. Results: We successfully fabricated a coaxially electrospun nanofiber MgONPs-PCL/PTH-PCL membrane with the majority of nanofibers (>65%) ranged from 0.40~0.60µm in diameter. MgONPs-PCL/PTH-PCL showed outstanding antibacterial potential against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) through the release of MgONPs. We also discovered that the incorporation of MgONPs significantly prolonged the release of PTH. Furthermore, both the in-vivo and in-vitro studies demonstrated that high dosage of PTH promoted pro-osteogenicity of the membrane to improve bone regeneration efficacy with the presence of MgONPs. Conclusion: The new composite membrane is a promising approach to enhance bone regeneration in periodontitis or peri-implantitis patients with large-volume bone defects.

Study of the intentional replantation procedure used to treat a tooth with a palatogingival groove: A case report.

In order to clarify the prognosis of intentional replantation used for palatogingival groove treatment for long-term follow-up observation, the case of a patient with a maxillary lateral incisor with palatogingival groove was investigated. The intentional replantation was carried out to preserve the tooth. The periodontal pocket and the apical bone defect were almost completely repaired at 12-month follow-up. However, the infection was reoccurred after 25-month follow-up examinations. The infected tooth was extracted, of which the root was investigated by histological analysis. Therefore, the reason of the replant failure and the pathways of bacterial infection was investigated. Key words:Palatogingival groove, intentional tooth replantation, bacterial infection, maxillary lateral incisor.

Magnetron sputtering of strontium nanolayer on zirconia implant to enhance osteogenesis.

The zirconia implants have a wide range of clinical applications, however, the biological inertness and lack of osteoinductive properties limit these applications. Strontium possesses superior biocompatibility and excellent osteogenic properties. To take advantage of these, the strontium titanate-coated zirconia implants were prepared in this study by sandblasting, acid etching, and magnetron sputtering, followed by the analysis of the biological behavior. Briefly, the zirconia sheets were polished and subjected to sandblasting and acid etching. Subsequently, a nano­strontium titanate coating was developed on the sheets by magnetron sputtering. The specimens were characterized by scanning electron microscopy (SEM), water contact angle measurement (WCA) and EDS mapping, which confirmed the physical alternation and successful deposition of the strontium titanate coating. The in vitro experiments indicated that the majority of the filopodia and actin fibers of the MC3T3-E1 cells on SA-ZrO2/Sr possessed an optimal osteogenic property to promote the osteogenic differentiation. Moreover, the RT-PCR results revealed that SA-ZrO2/Sr significantly up-regulated the gene expression of Runx2, COL-1, ALP, OPG, OPN and OCN. Further, the in vivo evaluation confirmed that the SA-ZrO2/Sr implants promoted the bone-implant osseointegration to the greatest extent as compared to SA-ZrO2 and ZrO2 implant. Overall, the SA-ZrO2/Sr system was confirmed to be a promising implant, thus, providing new pathways for an effective implant design.

Osteoinduction Evaluation of Fluorinated Hydroxyapatite and Tantalum Composite Coatings on Magnesium Alloys.

Magnesium (Mg) alloys have a wide range of biomaterial applications, but their lack of biocompatibility and osteoinduction property impedes osteointegration. In order to enhance the bioactivity of Mg alloy, a composite coating of fluorinated hydroxyapatite (FHA) and tantalum (Ta) was first developed on the surface of the alloy through thermal synthesis and magnetron sputtering technologies in this study. The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) mapping, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and water contact angle measurement (WCA), which characterized the surface alternation and confirmed the deposition of the target FHA/Ta coating. The results of cell morphology showed that the MC3T3-E1 cells on the surface of Mg/FHA/Ta samples had the largest spreading area and lamellipodia. Moreover, the FHA coating endowed the surface with superior cell viability and osteogenic properties, while Ta coating played a more important role in osteogenic differentiation. Therefore, the combination of FHA and Ta coatings could synergistically promote biological functions, thus providing a novel strategy for implant design.

Antibacterial and osteogenesis performances of LL37-loaded titania nanopores in vitro and in vivo.

Background: Many studies have shown that the size of nanotube (NT) can significantly affect the behavior of osteoblasts on titanium-based materials. But the weak bonding strength between NT and substrate greatly limits their application. Purpose: The objective of this study was to compare the stability of NT and nanopore (NP) coatings, and further prepare antibacterial titanium-based materials by loading LL37 peptide in NP structures. Methods: The adhesion strength of NT and NP layers was investigated using a scratch tester. The proliferation and differentiation of MC3T3-E1 cells on different substrates were evaluated in vitro by CCK8, alkaline phosphatase activity, mineralization and polymerase chain reaction assays. The antibacterial rates of NP and NP/LL37 were also measured by spread plate method. Moreover, the osteogenesis around NP and NP/LL373 in vivo was further evaluated using uninfected and infected models. Results: Scratch test proved that the NP layers had stronger bonding strength with the substrates due to their continuous pore structures and thicker pipe walls than the independent NT structures. In vitro, cell results showed that MC3T3-E1 cells on NP substrates had better early adhesion, spreading and osteogenic differentiation than those of NT group. In addition, based on the drug reservoir characteristics of porous materials, the NP substrates were also used to load antibacterial LL37 peptide. After loading LL37, the antibacterial and osteogenic induction abilities of NP were further improved, thus significantly promoting osteogenesis in both uninfected and infected models. Conclusion: We determined that the NP layers had stronger bonding strength than NT structures, and the corresponding NP materials might be more suitable than NT for preparing drug-device combined titanium implants for bone injury treatment.

Stability and osteogenic potential evaluation of micro-patterned titania mesoporous-nanotube structures.

Background: Although titanium dioxide nanotubes (TNTs) had great potential to promote osteogenesis, their weak bonding strength with titanium substrates greatly limited their clinical application. Purpose: The objective of this study was to maintain porosity and improve the stability of TNT coatings by preparing some micro-patterned mesoporous/nanotube (MP/TNT) structures via a photolithography-assisted anodization technology. Methods: The adhesion strength of different coatings was studied by ultrasonic cleaning machine and scratch tester. The early adhesion, spreading, proliferation and differentiation of MC3T3-E1 cells on different substrates were investigated in vitro by fluorescent staining, CCK8, alkaline phosphatase activity, mineralization and polymerase chain reaction assays, respectively. Results: Results of ultrasonic and scratch assays showed that the stability of TNTs (especially 125 nm) was significantly improved after being patterned with MP structures. In vitro cell assays further demonstrated that the insertion of MP structure into 125 nm TNT coating, which was denoted as MP125, could effectively improve the early adhesion, spreading and proliferation of surface MC3T3-E1 cells without damaging their osteogenic differentiation. Conclusion: We determined that the MP/TNT patterned samples (especially MP125) have excellent stability and osteogenesis properties, and may have better clinical application prospects.