[Translated article] In vitro elution of local anaesthetics from PMMA bone cement.

BACKGROUND AND AIM: Currently, we do not have a gold standard for pain management after total knee arthroplasty. We may use one of more drug delivery systems, none of which are ideal. An ideal depot delivery system would provide therapeutic, nontoxic, doses of drug at the surgical side, especially during 72h postoperatively. The bone cement used in arthroplasties has been used as a drug delivery system, especially antibiotics, since 1970. Based on this principle, we developed this study with the aim to characterize the elution profile of two local anaesthetics (lidocaine hydrochloride and bupivacaine hydrochloride) from PMMA (polymethilmethacrylate) bone cement. MATERIAL AND METHODS: Palacos® R+G bone cement and lidocaine hydrochloride or bupivacaine hydrochloride specimens were obtained depending on the study group. These specimens were immersed in PBS (phosphate buffered saline) and removed from the solution at different set times. Subsequently, the concentration of local anaesthetic in the liquid was analyzed by liquid chromatography. RESULTS: The percentage of lidocaine eluted from PMMA bone cement in this study was 9.74% of the total lidocaine content per specimen at 72h and 18.73% at 336h (14 days). In case of bupivacaine, the elution percentage was 2.71% of the total bupivacaine content per specimen at 72h and 2.70% at 336h (14 days). CONCLUSIONS: Local anaesthetics elute in vitro from PMMA bone cement, reaching doses at 72h close to the doses used in anaesthetic blocks.

[Translated article] Study of femoral component malrotation as a cause of pain after total knee arthroplasty.

INTRODUCTION: The total knee arthroplasty (TKA) has been shown to be a successful and cost-benefit procedure in terms of pain improvement in patient with symptomatic knee osteoarthritis. However, almost a 20% of the patients are not satisfied with the result of the surgery. MATERIAL AND METHOD: We have carried out a transversal unicentric cases controls study with clinical cases of the own hospital, obtained by a clinical records revision. A total of 160 patients with a TKA with at least 1 year of follow-up were selected. Demographic variables, functional scales (WOMAC and VAS) and rotation of the femoral component through the analysis of the images obtained by CT scan were collected. RESULTS: The total was 133 patients that was divided in two groups. A control group and pain group. The Control group was made up of 70 patients with a mean age of 69.59 years (23 men and 47 women) and the pain group was made up of 63 patients with a mean age of 69.48 years (13 men and 50 women). We didn't find difference regarding the analysis of the rotation of the femoral component. In addition, we were not found significant differences when applying a stratification by sex. And, the analysis of the malrotation of the femoral component, previously defining limits of value rotation considered as extreme, in any of the case did not show significant differences. CONCLUSION: The results of the study confirm that malrotation of the femoral component had no influence on the presence of pain at a minimum of one year of follow-up after TKA implantation.

[Translated article] In vitro elution of local anaesthetics from PMMA bone cement.

BACKGROUND AND AIM: Currently, we do not have a gold standard for pain management after total knee arthroplasty. We may use one of more drug delivery systems, none of which are ideal. An ideal depot delivery system would provide therapeutic, nontoxic, doses of drug at the surgical side, especially during 72h postoperatively. The bone cement used in arthroplasties has been used as a drug delivery system, especially antibiotics, since 1970. Based on this principle, we developed this study with the aim to characterise the elution profile of two local anaesthetics (lidocaine hydrochloride and bupivacaine hydrochloride) from PMMA (polymethilmethacrylate) bone cement. MATERIAL AND METHODS: Palacos® R+G bone cement and lidocaine hydrochloride or bupivacaine hydrochloride specimens were obtained depending on the study group. These specimens were immersed in PBS (phosphate buffered saline) and removed from the solution at different set times. Subsequently, the concentration of local anaesthetic in the liquid was analysed by liquid chromatography. RESULTS: The percentage of lidocaine eluted from PMMA bone cement in this study was 9.74% of the total lidocaine content per specimen at 72h and 18.73% at 336h (14 days). In case of bupivacaine, the elution percentage was 2.71% of the total bupivacaine content per specimen at 72h and 2.70% at 336h (14 days). CONCLUSIONS: Local anaesthetics elute in vitro from PMMA bone cement, reaching doses at 72h close to the doses used in anaesthetic blocks.

In vitro elution of local anesthetics from PMMA bone cement. / Estudio in vitro de elución de anestésicos locales en cemento óseo de PMMA.

BACKGROUND AND AIM: Currently, we do not have a gold standard for pain management after total knee arthroplasty. We may use one of more drug delivery systems, none of which are ideal. An ideal depot delivery system would provide therapeutic, nontoxic, doses of drug at the surgical side, especially during 72h postoperatively. The bone cement used in arthroplasties has been used as a drug delivery system, especially antibiotics, since 1970. Based on this principle, we developed this study with the aim to characterize the elution profile of two local anesthetics (lidocaine hydrochloride and bupivacaine hydrochloride) from PMMA (polymethilmethacrylate) bone cement. MATERIAL AND METHODS: Palacos® R+G bone cement and lidocaine hydrochloride or bupivacaine hydrochloride specimens were obtained depending on the study group. These specimens were immersed in PBS (phosphate buffered saline) and removed from the solution at different set times. Subsequently, the concentration of local anesthetic in the liquid was analyzed by liquid chromatography. RESULTS: The percentage of lidocaine eluted from PMMA bone cement in this study was 9.74% of the total lidocaine content per specimen at 72h and 18.73% at 336h (14 days). In case of bupivacaine, the elution percentage was 2.71% of the total bupivacaine content per specimen at 72h and 2.70% at 336h (14 days). CONCLUSIONS: Local anesthetics elute in vitro from PMMA bone cement, reaching doses at 72h close to the doses used in anesthetic blocks.

Study of femoral component malrotation as a cause of pain after total knee arthroplasty. / Estudio de la malrotación del componente femoral como causa de dolor tras la implantación de una artroplastia total de rodilla.

INTRODUCTION: The total knee arthroplasty (TKA) has been shown to be a successful and cost-benefit procedure in terms of pain improvement in patient with symptomatic knee osteoarthritis. However, almost a 20% of the patients are not satisfied with the result of the surgery. MATERIAL AND METHOD: We have carried out a transversal unicentric cases controls study with clinical cases of the own hospital, obtained by a clinical records revision. A total of 160 patients with a TKA with at least 1year of follow-up were selected. Demographic variables, functional scales (WOMAC and VAS) and rotation of the femoral component through the analysis of the images obtained by CT scan were collected. RESULTS: The total was 133 patients that was divided in two groups. A control group and pain group. The control group was made up of 70 patients with a mean age of 69.59years (23 men and 47 women) and the pain group was made up of 63 patients with a mean age of 69.48years (13 men and 50 women). We did not found difference regarding the analysis of the rotation of the femoral component. In addition, we were not found significant differences when applying a stratification by sex. The analysis of the malrotation of the femoral component, previously defining limits of value rotation considered as extreme, in any of the case did not show significant differences. CONCLUSION: The results of the study confirm that malrotation of the femoral component had no influence on the presence of pain at a minimum of one year of follow-up after TKA implantation.

Estudio in vitro de elución de anestésicos locales en cemento óseo de PMMA / In vitro elution of local anesthetics from PMMA bone cement

Antecedentes y objetivo:Actualmente, no disponemos de un gold standard para el manejo del dolor postoperatorio tras una artroplastia total de rodilla, dado que se pueden administrar analgésicos a través de diferentes vías y ninguna de estas está exenta de riesgos. El sistema ideal de administración de analgésicos debería proporcionar dosis terapéuticas, no tóxicas, en el sitio quirúrgico, especialmente durante las primeras 72h. El cemento óseo utilizado en las artroplastias se ha usado como un medio de liberación de fármacos, especialmente antibióticos, desde 1970. Basado en este principio, se desarrolló este estudio con el objetivo de conocer el perfil de elución de dos anestésicos locales (hidrocloruro de lidocaína e hidrocloruro de bupivacaína) desde el cemento óseo de polimetilmetacrilato (PMMA). Material y métodos: Se obtuvieron especímenes de cemento óseo Palacos® R+G e hidrocloruro de lidocaína o hidrocloruro de bupivacaína según el grupo de estudio. Estos especímenes se sumergieron en PBS (por sus siglas en inglés de phosphate buffered saline) y se retiraron de la solución en diferentes cortes temporales establecidos. Posteriormente, se analizó la concentración de anestésico local en el líquido mediante cromatografía líquida. Resultados: El porcentaje de lidocaína eludida del cemento óseo PMMA de este estudio ha sido del 9,74% del contenido total de lidocaína por espécimen a las 72h y del 18,73% a las 336h (14 días). En el caso de la bupivacaína, el porcentaje de elución ha sido del 2,71% del contenido total de bupivacaína por espécimen a las 72h y del 2,70% a las 336h (14 días). Conclusiones: Los anestésicos locales eluyen in vitro desde el cemento óseo, alcanzando a las 72h dosis cercanas a las dosis utilizadas en bloqueos anestésicos.(AU)

Background and aim: Currently, we do not have a gold standard for pain management after total knee arthroplasty. We may use one of more drug delivery systems, none of which are ideal. An ideal depot delivery system would provide therapeutic, nontoxic, doses of drug at the surgical side, especially during 72h postoperatively. The bone cement used in arthroplasties has been used as a drug delivery system, especially antibiotics, since 1970. Based on this principle, we developed this study with the aim to characterize the elution profile of two local anesthetics (lidocaine hydrochloride and bupivacaine hydrochloride) from PMMA (polymethilmethacrylate) bone cement. Material and methods: Palacos® R+G bone cement and lidocaine hydrochloride or bupivacaine hydrochloride specimens were obtained depending on the study group. These specimens were immersed in PBS (phosphate buffered saline) and removed from the solution at different set times. Subsequently, the concentration of local anesthetic in the liquid was analyzed by liquid chromatography. Results: The percentage of lidocaine eluted from PMMA bone cement in this study was 9.74% of the total lidocaine content per specimen at 72h and 18.73% at 336h (14 days). In case of bupivacaine, the elution percentage was 2.71% of the total bupivacaine content per specimen at 72h and 2.70% at 336h (14 days). Conclusions: Local anesthetics elute in vitro from PMMA bone cement, reaching doses at 72h close to the doses used in anesthetic blocks.(AU)

[Translated article] In vitro elution of local anaesthetics from PMMA bone cement / Estudio in vitro de elución de anestésicos locales en cemento óseo de PMMA

Antecedentes y objetivo:Actualmente, no disponemos de un gold standard para el manejo del dolor postoperatorio tras una artroplastia total de rodilla, dado que se pueden administrar analgésicos a través de diferentes vías y ninguna de estas está exenta de riesgos. El sistema ideal de administración de analgésicos debería proporcionar dosis terapéuticas, no tóxicas, en el sitio quirúrgico, especialmente durante las primeras 72h. El cemento óseo utilizado en las artroplastias se ha usado como un medio de liberación de fármacos, especialmente antibióticos, desde 1970. Basado en este principio, se desarrolló este estudio con el objetivo de conocer el perfil de elución de dos anestésicos locales (hidrocloruro de lidocaína e hidrocloruro de bupivacaína) desde el cemento óseo de polimetilmetacrilato (PMMA). Material y métodos: Se obtuvieron especímenes de cemento óseo Palacos® R+G e hidrocloruro de lidocaína o hidrocloruro de bupivacaína según el grupo de estudio. Estos especímenes se sumergieron en PBS (por sus siglas en inglés de phosphate buffered saline) y se retiraron de la solución en diferentes cortes temporales establecidos. Posteriormente, se analizó la concentración de anestésico local en el líquido mediante cromatografía líquida. Resultados: El porcentaje de lidocaína eludida del cemento óseo PMMA de este estudio ha sido del 9,74% del contenido total de lidocaína por espécimen a las 72h y del 18,73% a las 336h (14 días). En el caso de la bupivacaína, el porcentaje de elución ha sido del 2,71% del contenido total de bupivacaína por espécimen a las 72h y del 2,70% a las 336h (14 días). Conclusiones: Los anestésicos locales eluyen in vitro desde el cemento óseo, alcanzando a las 72h dosis cercanas a las dosis utilizadas en bloqueos anestésicos.(AU)

Background and aim: Currently, we do not have a gold standard for pain management after total knee arthroplasty. We may use one of more drug delivery systems, none of which are ideal. An ideal depot delivery system would provide therapeutic, nontoxic, doses of drug at the surgical side, especially during 72h postoperatively. The bone cement used in arthroplasties has been used as a drug delivery system, especially antibiotics, since 1970. Based on this principle, we developed this study with the aim to characterize the elution profile of two local anesthetics (lidocaine hydrochloride and bupivacaine hydrochloride) from PMMA (polymethilmethacrylate) bone cement. Material and methods: Palacos® R+G bone cement and lidocaine hydrochloride or bupivacaine hydrochloride specimens were obtained depending on the study group. These specimens were immersed in PBS (phosphate buffered saline) and removed from the solution at different set times. Subsequently, the concentration of local anesthetic in the liquid was analyzed by liquid chromatography. Results: The percentage of lidocaine eluted from PMMA bone cement in this study was 9.74% of the total lidocaine content per specimen at 72h and 18.73% at 336h (14 days). In case of bupivacaine, the elution percentage was 2.71% of the total bupivacaine content per specimen at 72h and 2.70% at 336h (14 days). Conclusions: Local anesthetics elute in vitro from PMMA bone cement, reaching doses at 72h close to the doses used in anesthetic blocks.(AU)