RESUMEN
Text regions in natural scenes have complex and variable shapes. Directly using contour coordinates to describe text regions will make the modeling inadequate and lead to low accuracy of text detection. To address the problem of irregular text regions in natural scenes, we propose an arbitrary-shaped text detection model based on Deformable DETR called BSNet. The model differs from the traditional method of directly predicting contour points by using B-Spline curve to make the text contour more accurate and reduces the number of predicted parameters simultaneously. The proposed model eliminates manually designed components and dramatically simplifies the design. The proposed model achieves F-measure of 86.8% and 87.6% on CTW1500 and Total-Text, demonstrating the model's effectiveness.
RESUMEN
In accelerator driven systems (ADSs), steels will suffer not only from the irradiation damage produced by protons or neutrons, but also from the dissolution corrosion induced by the liquid lead-bismuth eutectic (LBE). In this work we investigate the interactions between LBE atoms (Pb, Bi) and the irradiation induced defects X (X is helium, vacancy or divacancy) in α-Fe based on first-principles calculations. It is found that LBE atoms repulse each other without irradiation defects, while they aggregate easily with the defects to form X-Pbn and X-Bin complexes. This indicates that the irradiation defects could promote the aggregation of LBE atoms in iron, especially Bi atoms. The total binding energies of the X-Pbn and X-Bin complexes increase with the number of Pb and Bi atoms, respectively. The origin of the total binding energies of the complexes is further discussed via the electronic structures and the distortion of the crystalline lattice. Finally, the concentration evolutions of the Vac-(Bi)n complexes and unbound vacancies with temperature are predicted by the mass action analysis. This work provides important information for the synergistic effect of irradiation and LBE corrosion on the steels in the ADSs, which can be used as basic parameters for further study.
RESUMEN
Impurity doping is a necessary technology for the application of semiconductor materials in microelectronic devices. The quantification of doping effects is crucial for controlling the transport properties of semiconductors. Here, taking two-dimensional (2D) hexagonal boron phosphide semiconductor as an example, we employ coherent potential approximation method to investigate the electronic properties of 2D semiconductor materials at low doping concentrations, which cannot be exploited with conventional density function theory. The results demonstrate that the positive or negative impurity potential in 2D semiconductors determines whether it is p-type or n-type doping, while the impurity potential strength decides whether it is shallow-level or deep-level doping. Impurity concentration has important impacts on not only the intensity but also the broadening of impurity peak in band gap. Importantly, we provide the operating temperature range of hexagonal boron phosphide as a semiconductor device under different impurity concentrations and impurity potentials. The methodology of this study can be applied to other 2D semiconductors, which is of great significance for quantitative research on the application of 2D semiconductors for electronic devices.
RESUMEN
Currently, quantum anomalous Hall (QAH) effect can only be observed at very low temperatures, which severely hinders its utilization from spintronics to quantum computation. Finding or predicting new systems supporting QAH effect at high temperatures remains essential and challenging. This work presents first-principles studies on the proximity effect between Bi2Se3slabs and Cr2Ge2Te6(CGT) layers, reporting that Chern insulators are available in CGT/Bi2Se3/CGT heterostructures. If the sandwiched Bi2Se3slab is 4 quintuple layers (QLs) or thicker, the Chern insulating state is robust against the interfacial stacking manner. If the Bi2Se3slab is only 2 or 3 QLs, the CrBi- and CrH-aligned heterostructures are also Chern insulators, while the CrSe-aligned ones are trivial. The Chern insulators support the Hall conductivityσxy=e2/hand have energy gaps ranging from 3 to 20 meV, implying QAH effect at higher temperatures. An effective model Hamiltonian is introduced to understand the topological phase of the heterostructures.
RESUMEN
Intermetallic alloy ZrCo is a good material for storing tritium (T). However, ZrCo is prone to disproportionation reactions during the process of charging and discharging T. Alloying atoms are often added in ZrCo, occupying the Zr or Co site, in order to restrain disproportionation reactions. Meanwhile, T often decays into helium (He), and the purity of T seriously decreases once He escapes from ZrCo. Therefore, it is necessary to understand the influence of alloying atoms on the basic stability property of He. In this work, we perform systematical ab initio calculations to study the stability property of He in ZrCoH3 (ZrCo adsorbs the H isotope, forming ZrCoH3). The results suggest that the He atom will undergo displacements of 0.31 and 0.12 Å when it substitutes for Co and Zr, respectively. In contrast, the displacements are very large, at 0.67-1.09 Å, for He replacing H. Then, we introduce more than 20 alloying atoms in ZrCo to replace Co and Zr in order to examine the influence of alloying atoms on the stability of He at H sites. It is found that Ti, V, Cr, Mn, Fe, Zn, Nb, Mo, Tc, Ru, Ta, W, Re, and Os replacing Co can increase the substitution energy of H by the He closest to the alloying atom, whereas only Cr, Mn, Fe, Mo, Tc, Ru, Ta, W, Re, and Os replacing Co can increase the substitution energy of H by the He next closest to the alloying atom. The influence of the alloying atom substituting Zr site on the substitution energies is inconspicuous, and only Nb, Mo, Ru, Ta, and W increase the substitution energies of H by the He closest to the alloying atom. The increase in the substitution energy may suggest that these alloy atoms are conducive to fix the He atom in ZrCo and avoid the reduction in tritium purity.
RESUMEN
BACKGROUND: Benign prostatic hyperplasia (BPH) is a non-malignant enlargement of the prostate gland that is common in older men. The clinical manifestations of BPH are frequent urination, urgency, incomplete dribbling of urine, and urinary retention. Moxibustion, as a convenient, safe and effective method, has been widely applied in the clinical treatment of BPH. The study aim to assess the efficacy and safety of moxibustion for BPH. METHODS: The following electronic databases will be searched regardless of language and publication status: Pubmed, MEDLINE, EMBASE, China Biomedical Database, China National Knowledge Infrastructure, VIP Database, and Wanfang Database, to select studies that meet the requirements. The study will consist of a prospective randomised controlled clinical trials (RCTs) of moxibustion in the treatment of BPH, language of publication does not have barrier of blinding or restrictions, adverse events will be assessed and reported for safety assessment. Two reviewers will independently conduct and screen all included studies and the meta-analysis will be performed with RevMan V5.3. RESULTS: The study will provide a high-quality convincing assessment of efficacy and safety of moxibustion for BPH. CONCLUSION: The conclusion of this study will provide the latest evidence for judging whether moxibustion is effective and safe in the treatment of BPH. TRIAL REGISTRATION NUMBER: INPLASY2021120021.
Asunto(s)
Puntos de Acupuntura , Moxibustión , Hiperplasia Prostática/terapia , Anciano , Humanos , Masculino , Metaanálisis como Asunto , Estudios Prospectivos , Ensayos Clínicos Controlados Aleatorios como Asunto , Proyectos de Investigación , Revisiones Sistemáticas como Asunto , Resultado del TratamientoRESUMEN
The damage layer of a W (100) crystal irradiated with 120 eV hydrogen ions at a fluence of up to 1.5 × 10(25)/m(2) was investigated by scanning electron microscopy and conductive atomic force microscopy (CAFM). The periodic surface degeneration of the W crystal at a surface temperature of 373 K was formed at increasing hydrogen fluence. Observations by CCD camera and CAFM indicate the existence of ultrathin surface layers due to low-energy H irradiation. The W surface layer can contain a high density of nanometer-sized defects, resulting in the thermal instability of W atoms in the surface layer. Our findings suggest that the periodic surface degeneration of the W crystal can be ascribed to the lateral erosion of W surface layers falling off during the low-energy hydrogen irradiation. Our density functional theory calculations confirm the thermal instability of W atoms in the top layer, especially if H atoms are adsorbed on the surface.
RESUMEN
We report the formation of wave-like structures and nanostructured fuzzes in the polycrystalline tungsten (W) irradiated with high-flux and low-energy helium (He) ions. From conductive atomic force microscope measurements, we have simultaneously obtained the surface topography and current emission images of the irradiated W materials. Our measurements show that He-enriched and nanostructured strips are formed in W crystal grains when they are exposed to low-energy and high-flux He ions at a temperature of 1400 K. The experimental measurements are confirmed by theoretical calculations, where He atoms in W crystal grains are found to cluster in a close-packed arrangement between {101} planes and form He-enriched strips. The formations of wave-like structures and nanostructured fuzzes on the W surface can be attributed to the surface sputtering and swelling of He-enriched strips, respectively.