Porcine cis-acting lnc-CAST positively regulates CXCL8 expression through histone H3K27ac.

The chemokine CXCL8, also known as the neutrophil chemotactic factor, plays a crucial role in mediating inflammatory responses and managing cellular immune reactions during viral infections. Porcine reproductive and respiratory syndrome virus (PRRSV) primarily infects pulmonary alveolar macrophages (PAMs), leading to acute pulmonary infections. In this study, we explored a novel long non-coding RNA (lncRNA), termed lnc-CAST, situated within the Cxcl8 gene locus. This lncRNA was found to be highly expressed in porcine macrophages. We observed that both lnc-CAST and CXCL8 were significantly upregulated in PAMs following PRRSV infection, and after treatments with lipopolysaccharide (LPS) or lipoteichoic acid (LTA). Furthermore, we noticed a concurrent upregulation of lnc-CAST and CXCL8 expression in lungs of PRRSV-infected pigs. We then determined that lnc-CAST positively influenced CXCL8 expression in PAMs. Overexpression of lnc-CAST led to an increase in CXCL8 production, which in turn enhanced the migration of epithelial cells and the recruitment of neutrophils. Conversely, inhibiting lnc-CAST expression resulted in reduced CXCL8 production in PAMs, leading to decreased migration levels of epithelial cells and neutrophils. From a mechanistic perspective, we found that lnc-CAST, localized in the nucleus, facilitated the enrichment of histone H3K27ac in CXCL8 promoter region, thereby stimulating CXCL8 transcription in a cis-regulatory manner. In conclusion, our study underscores the pivotal critical role of lnc-CAST in regulating CXCL8 production, offering valuable insights into chemokine regulation and lung damage during PRRSV infection.

Schistosoma japonicum cystatin alleviates paraquat poisoning caused acute lung injury in mice through activating regulatory macrophages.

BACKGROUND: Paraquat (PQ) is a widely used herbicide that poisons human by accident or intentional ingestion. PQ poisoning causes systemic inflammatory response syndrome (SIRS) resulting in acute lung injury (ALI) with an extremely high mortality rate. Blood trematode Schistosoma japonicum-produced cystatin (Sj-Cys) is a strong immunomodulatory protein that has been experimentally used to treat inflammation related diseases. In this study, Sj-Cys recombinant protein (rSj-Cys) was used to treat PQ-induced lung injury and the immunological mechanism underlying the therapeutic effect was investigated. METHODS: PQ-induced acute lung injury mouse model was established by intraperitoneally injection of 20 mg/kg of paraquat. The poisoned mice were treated with rSj-Cys and the survival rate was observed up to 7 days compared with the group without treatment. The pathological changes of PQ-induced lung injury were observed by examining the histochemical sections of affected lung tissue and the wet to dry ratio of lung as a parameter for inflammation and edema. The levels of the inflammation related cytokines IL-6 and TNF-α and regulatory cytokines IL-10 and TGF-ß were measured in sera and in affected lung tissue using ELISA and their mRNA levels in lung tissue using RT-PCR. The macrophages expressing iNOS were determined as M1 and those expressing Arg-1 as M2 macrophages. The effect of rSj-Cys on the transformation of inflammatory M1 to regulatory M2 macrophages was measured in affected lung tissue in vivo (EKISA and RT-PCR) and in MH-S cell line in vitro (flow cytometry). The expression levels of TLR2 and MyD88 in affected lung tissue were also measured to determine their role in the therapy of rSj-Cys on PQ-induced lung injury. RESULT: We identified that treatment with rSj-Cys significantly improved the survival rate of mice with PQ-induced lung injury from 30 % (untreated) to 80 %, reduced the pathological damage of poisoning lung tissue, associated with significantly reduced levels of proinflammatory cytokines (IL-6 from 1490 to 590 pg/ml, TNF-α from 260 to 150 pg/ml) and increased regulatory cytokines (IL-10 from360 to 550 pg/ml, and TGF-ß from 220 to 410 pg/ml) in both sera (proteins) and affected lung tissue (proteins and mRNAs). The polarization of macrophages from M1to M2 type was found to be involved in the therapeutic effect of rSj-Cys on the PQ-induced acute lung injury, possibly through inhibiting TLR2/MyD88 signaling pathway. CONCLUSIONS: Our study demonstrated the therapeutic effect of rSj-Cys on PQ poisoning caused acute lung injury by inducing M2 macrophage polarization through inhibiting TLR2/MyD88 signaling pathway. The finding in this study provides an alternative approach for the treatment of PQ poisoning and other inflammatory diseases.

MnO4--Triggered Immediate-Stable Real-Time Fluorescence Immunosensor with High Response Speed and Low Steady-State Error.

Real-time chemical and biological sensing in vitro is important for application in health and environmental monitoring. Thus, a more rapid and stable detection method is urgently needed. Herein, an immediate-stable real-time fluorescent immunosensor with a high response speed (∼100%, <1 s) and approximately zero steady-state error is constructed. The developed sensor is based on the MnO4--triggered in situ immediate-stable fluorogenic reaction between dopamine and orcinol monohydrate to produce azamonardine (DMTM). The obtained DMTM is identified and characterized by high-resolution mass spectrometry, 1H NMR spectroscopy, 13C NMR spectroscopy, and theoretical calculations. The present sensor achieves a highly sensitive detection of dopamine (DA) with a limit of detection (LOD) of 10 nM as well as alkaline phosphates (ALP) with an LOD of 0.1 mU/mL by using orcinol monohydrate phosphate sodium salt as a substrate. As a proof of concept, ALP-triggered fluorescence ELISA using cardiac troponin I (cTnI) as a model antigen target is further constructed. The developed real-time sensor achieves the detection of cTnI with an LOD of 0.05 ng/mL. Moreover, the sensor proposed by us is successfully applied to assess the cTnI level in clinical serum specimens and yields results consistent with those obtained by the commercial ELISA method. The immediate-stable real-time fluorescence immunosensor provides a promising and powerful platform for the trace detection of biomolecules in clinical diagnosis.

Physiological and iTRAQ-based quantitative proteomics analyses reveal the similarities and differences in stress responses between short-term boron deficiency and toxicity in wheat roots.

BACKGROUND: Boron (B) is a trace element that is essential for normal wheat development, such as root growth. In wheat, roots are important organs that absorb nutrients and water. However, at present, there is insufficient research on the molecular mechanism underlying how short-term B stress affects wheat root growth. METHODS AND RESULTS: Here, the optimal concentration of B for wheat root growth was determined, and the proteomic profiles of roots under short-term B deficiency and toxicity were analyzed and compared by the isobaric tag for relative and absolute quantitation (iTRAQ) technique. A total of 270 differentially abundant proteins (DAPs) that accumulated in response to B deficiency and 263 DAPs that accumulated in response to B toxicity were identified. Global expression analysis revealed that ethylene, auxin, abscisic acid (ABA), and Ca2+ signals were involved in the responses to these two stresses. Under B deficiency, DAPs related to auxin synthesis or signaling and DAPs involved in calcium signaling increased in abundance. In striking contrast, auxin and calcium signals were repressed under B toxicity. Twenty-one DAPs were detected under both conditions, including RAN1 that played a core role in the auxin and calcium signals. Overexpression of RAN1 was shown to confer plant resistance to B toxicity by activating auxin response genes, including TIR and those identified by iTRAQ in this research. Moreover, growth of the primary roots of tir mutant was significantly inhibited under B toxicity. CONCLUSION: Taken together, these results indicate that some connections were present between RAN1 and the auxin signaling pathway under B toxicity. Therefore, this research provides data for improving the understanding of the molecular mechanism underlying the response to B stress.

Optical/electrochemical methods for detecting mitochondrial energy metabolism.

This review highlights the biological importance of mitochondrial energy metabolism and the applications of multiple optical/electrochemical approaches to determine energy metabolites. Mitochondria, the main sites of oxidative phosphorylation and adenosine triphosphate (ATP) biosynthesis, provide the majority of energy required by aerobic cells for maintaining their physiological activity. They also participate in cell growth, differentiation, information transmission, and apoptosis. Multiple mitochondrial diseases, caused by internal or external factors, including oxidative stress, intense fluctuations of the ionic concentration, abnormal oxidative phosphorylation, changes in electron transport chain complex enzymes and mutations in mitochondrial DNA, can occur during mitochondrial energy metabolism. Therefore, developing accurate, sensitive, and specific methods for the in vivo and in vitro detection of mitochondrial energy metabolites is of great importance. In this review, we summarise the mitochondrial structure, functions, and crucial energy metabolic signalling pathways. The mechanism and applications of different optical/electrochemical methods are thoroughly reviewed. Finally, future research directions and challenges are proposed.

A Magnetic Levitation System for Range/Sensitivity-Tunable Measurement of Density.

Magnetic levitation (MagLev) is a promising density-based analytical technique with numerous applications. Several MagLev structures with different levels of sensitivity and range have been studied. However, these MagLev structures can seldom satisfy the different performance requirements simultaneously, such as high sensitivity, wide measurement range, and easy operation, which have prevented them from being widely used. In this work, a tunable MagLev system was developed. It is confirmed by numerical simulation and experiments that this system possesses a high resolution down to 10-7 g/cm3 or even higher compared to the existing systems. Meanwhile, the resolution and range of this tunable system can be adjusted to meet different requirements of measurement. More importantly, this system can be operated simply and conveniently. This bundle of characteristics demonstrates that the novel tunable MagLev system could be handily applied in various density-based analyses on demand, which would greatly expand the ability of MagLev technology.

Spatio-Temporal Changes in Ecosystem Quality across the Belt and Road Region.

The Silk Road Economic Belt and the 21st Century Maritime Silk Road Initiative (BRI) proposed in 2013 by China has greatly accelerated the social and economic development of the countries along the Belt and Road (B&R) region. However, the international community has questioned its impact on the ecological environment and a comprehensive assessment of ecosystem quality changes is lacking. Therefore, this study proposes an objective and automatic method to assess ecosystem quality and analyzes the spatiotemporal changes in the B&R region. First, an ecosystem quality index (EQI) is established by integrating the vegetation status derived from three remote sensing ecological parameters including the leaf area index, fractional vegetation cover and gross primary productivity. Then, the EQI values are automatically categorized into five ecosystem quality levels including excellent, good, moderate, low and poor to illustrate their spatiotemporal changes from the years 2016 to 2020. The results indicate that the spatial distributions of the EQIs across the B&R region exhibited similar patterns in the years 2016 and 2020. The regions with excellent levels accounted for the lowest proportion of less than 12%, while regions with moderate, low and poor levels accounted for more than 68% of the study area. Moreover, based on the EQI pattern analysis between the years 2016 and 2020, the regions with no significant EQI change accounted for up to 99.33% and approximately 0.45% experienced a significantly decreased EQI. Therefore, this study indicates that the ecosystem quality of the B&R region was relatively poor and experienced no significant change in the five years after the implementation of the "Vision and Action to Promote the Joint Construction of the Silk Road Economic Belt and the 21st Century Maritime Silk Road". This study can provide useful information for decision support on the future ecological environment management and sustainable development of the B&R region.

Enhancing maize's nitrogen-fixing potential through ZmSBT3, a gene suppressing mucilage secretion.

Maize (Zea mays) requires substantial amounts of nitrogen, posing a challenge for its cultivation. Recent work discovered that some ancient Mexican maize landraces harbored diazotrophic bacteria in mucilage secreted by their aerial roots. To see if this trait is retained in modern maize, we conducted a field study of aerial root mucilage (ARM) in 258 inbred lines. We observed that ARM secretion is common in modern maize, but the amount significantly varies, and only a few lines have retained the nitrogen-fixing traits found in ancient landraces. The mucilage of the high-ARM inbred line HN5-724 had high nitrogen-fixing enzyme activity and abundant diazotrophic bacteria. Our genome-wide association study identified 17 candidate genes associated with ARM across three environments. Knockouts of one candidate gene, the subtilase family gene ZmSBT3, confirmed that it negatively regulates ARM secretion. Notably, the ZmSBT3 knockout lines had increased biomass and total nitrogen accumulation under nitrogen-free culture conditions. High ARM was associated with three ZmSBT3 haplotypes that were gradually lost during maize domestication, being retained in only a few modern inbred lines such as HN5-724. In summary, our results identify ZmSBT3 as a potential tool for enhancing ARM, and thus nitrogen fixation, in maize.

Realizing Ultrahigh Transconductance in Organic Electrochemical Transistor by Co-Doping PEDOT:PSS with Ionic Liquid and Dodecylbenzenesulfonate.

Organic electrochemical transistors (OECTs), especially the ones with high transconductance, are highly promising in sensitive detection of chemical and biological species. However, it is still a great challenge to design and fabricate OECTs with very high transconductance. Herein, an OECT with ultrahigh transconductance is reported by introducing ionic liquid and dodecylbenzenesulfonate (DBSA) simultaneously in poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) as the semiconductive channel. Compared with the OECT based on pristine PEDOT:PSS, the OECT based on co-doped PEDOT:PSS demonstrates a significant enhancement of transconductance from 1.85 to 22.7 mS, because of the increase in volumetric capacitance and conductivity. The enhanced transconductance is attributed to the DBSA-facilitated phase separation between the ionic liquid and PEDOT:PSS, which helps to form conductive domains of ionic liquid in PEDOT:PSS matrix, and the partial dispersion of ionic liquid in the PEDOT:PSS phase. Furthermore, by using the interdigitated electrodes as the source and drain electrodes, an ultrahigh transconductance of 180 mS is obtained, which is superior to that of the state-of-the-art OECTs. Because of the ultrahigh transconductance, the obtained OECT demonstrates sensitive detection of hydrogen peroxide and glucose, making it promising in clinical diagnosis, health monitoring, and environmental surveillance.

An Improved Spatiotemporal Data Fusion Method for Snow-Covered Mountain Areas Using Snow Index and Elevation Information.

Remote sensing images with high spatial and temporal resolution in snow-covered areas are important for forecasting avalanches and studying the local weather. However, it is difficult to obtain images with high spatial and temporal resolution by a single sensor due to the limitations of technology and atmospheric conditions. The enhanced spatial and temporal adaptive reflectance fusion model (ESTARFM) can fill in the time-series gap of remote sensing images, and it is widely used in spatiotemporal fusion. However, this method cannot accurately predict the change when there is a change in surface types. For example, a snow-covered surface will be revealed as the snow melts, or the surface will be covered with snow as snow falls. These sudden changes in surface type may not be predicted by this method. Thus, this study develops an improved spatiotemporal method ESTARFM (iESTARFM) for the snow-covered mountain areas in Nepal by introducing NDSI and DEM information to simulate the snow-covered change to improve the accuracy of selecting similar pixels. Firstly, the change in snow cover is simulated according to NDSI and DEM. Then, similar pixels are selected according to the change in snow cover. Finally, NDSI is added to calculate the weights to predict the pixels at the target time. Experimental results show that iESTARFM can reduce the bright abnormal patches in the land area compared to ESTARFM. For spectral accuracy, iESTARFM performs better than ESTARFM with the root mean square error (RMSE) being reduced by 0.017, the correlation coefficient (r) being increased by 0.013, and the Structural Similarity Index Measure (SSIM) being increased by 0.013. For spatial accuracy, iESTARFM can generate clearer textures, with Robert's edge (Edge) being reduced by 0.026. These results indicate that iESTARFM can obtain higher prediction results and maintain more spatial details, which can be used to generate dense time series images for snow-covered mountain areas.

GmFULa improves soybean yield by enhancing carbon assimilation without altering flowering time or maturity.

KEY MESSAGE: GmFULa improved soybean yield by enhancing carbon assimilation. Meanwhile, different from known yield-related genes, it did not alter flowering time or maturity. Soybean (Glycine max (L.) Merr.) is highly demanded by a continuously growing human population. However, increasing soybean yield is a major challenge. FRUITFULL (FUL), a MADS-box transcription factor, plays important roles in multiple developmental processes, especially fruit and pod development, which are crucial for soybean yield formation. However, the functions of its homologs in soybean are not clear. Here, through haplotype analysis, we found that one haplotype of the soybean homolog GmFULa (GmFULa-H02) is dominant in cultivated soybeans, suggesting that GmFULa-H02 was highly selected during domestication and varietal improvement of soybean. Interestingly, transgenic overexpression of GmFULa enhanced vegetative growth with more biomass accumulated and ultimately increased the yield but without affecting the plant height or changing the flowering time and maturity, indicating that it enhances the efficiency of dry matter accumulation. It also promoted the yield factors like branch number, pod number and 100-seed weight, which ultimately increased the yield. It increased the palisade tissue cell number and the chlorophyll content to promote photosynthesis and increase the soluble sugar content in leaves and fresh seeds. Furthermore, GmFULa were found to be sublocalized in the nucleus and positively regulate sucrose synthases (SUSs) and sucrose transporters (SUTs) by binding with the conserved CArG boxes in their promoters. Overall, these results showed GmFULa promotes the capacity of assimilation and the transport of the resultant assimilates to increase yield, and provided insights into the link between GmFULa and sucrose synthesis with transport-related molecular pathways that control seed yield.

Signal-Enhanced Detection of Multiplexed Cardiac Biomarkers by a Paper-Based Fluorogenic Immunodevice Integrated with Zinc Oxide Nanowires.

Using a single test to comprehensively evaluate multiple cardiac biomarkers for early diagnosis and prevention of acute myocardial infarction (AMI) has faced enormous challenges. Here, we have developed paper-based fluorogenic immunodevices for multiplexed detection of three cardiac biomarkers, namely, human heart-type fatty acid binding protein (FABP), cardiac troponin I (cTnI), and myoglobin, simultaneously. The detection is based on a strategy using zinc oxide nanowires (ZnO NWs) to enhance fluorescence signals (∼5-fold compared to that on pure paper). The immunodevices showed high sensitivity and selectivity for FABP, cTnI, and myoglobin with detection limits of 1.36 ng/mL, 1.00 ng/mL, and 2.38 ng/mL, respectively. Additionally, the paper-based immunoassay was rapid (∼5 min to complete the test) and portable (using a homemade chamber with a smartphone and an ultraviolet lamp). The developed devices integrated with ZnO NWs enable quantitative, sensitive, and simultaneous detection of multiple cardiac biomarkers in point-of-care settings, which provides a useful approach for monitoring AMI diseases and may be extended to other medical diagnostics and environmental assessments.

The environmental obesogen bisphenol A increases macrophage self-renewal.

Self-renewal of macrophages is important for the healthy development and replenishment of tissue-resident macrophage pools. How this mechanism is controlled by endocrine signals is still largely unexplored. Here, we show that the endocrine disruptor bisphenol A (BPA) increases macrophage self-renewal. This effect was associated with phosphorylation of extracellular signal-regulated kinase (ERK) and a slight increase in the expression of liver X receptor alpha (LXRα). We found that LXRα inhibition induced, while LXRα activation impeded, macrophage self-renewal. LXRα signaling hence may protect from excessive macrophage expansion. Self-renewing macrophages, however, had negligible LXRα expression when compared with quiescent macrophages. Accordingly, tissue-resident macrophage pools, which are dominated by quiescent macrophages, were rich in LXRα-expressing macrophages. Overall, we show that BPA increases macrophage self-renewal and that this effect, at least in part, can be inhibited by increasing LXRα expression. Since BPA is accumulated in the adipose tissue, it has the potential to increase self-renewal of adipose tissue macrophages, leading to a condition that might negatively impact adipose tissue health.

Linkage mapping and genome-wide association reveal candidate genes conferring thermotolerance of seed-set in maize.

It is predicted that high-temperature stress will increasingly affect crop yields worldwide as a result of climate change. In order to determine the genetic basis of thermotolerance of seed-set in maize under field conditions, we performed mapping of quantitative trait loci (QTLs) in a recombinant inbred line (RIL) population using a collection of 8329 specifically developed high-density single-nucleotide polymorphism (SNP) markers, combined with a genome-wide association study (GWAS) of 261 diverse maize lines using 259 973 SNPs. In total, four QTLs and 17 genes associated with 42 SNPs related to thermotolerance of seed-set were identified. Among them, four candidate genes were found in both linkage mapping and GWAS. Thermotolerance of seed-set was increased significantly in near-isogenic lines (NILs) that incorporated the four candidate genes in a susceptible parent background. The expression profiles of two of the four genes showed that they were induced by high temperatures in the maize tassel in a tolerant parent background. Our results indicate that thermotolerance of maize seed-set is regulated by multiple genes each of which has minor effects, with calcium signaling playing a central role. The genes identified may be exploited in breeding programs to improve seed-set and yield of maize under heat stress.

A transparent paper-based platform for multiplexed bioassays by wavelength-dependent absorbance/transmittance.

This communication describes the rational design of a transparent paper-based chemosensing platform for multi-target detection by wavelength-dependent absorbance/transmittance. The platform was successfully applied in the examination of bovine serum albumin (BSA) and cholesterol in serum with a low detection limit of 0.1 µM and 0.1 mM, respectively. With low cost and high sensitivity, the paper-based platform shows great promise for multiplexed bioassays.

A paper-based chemiluminescence immunoassay device for rapid and high-throughput detection of allergen-specific IgE.

The fast and precise detection of potential allergen-specific immunoglobulin E (sIgE) is imperative for the diagnosis and appropriate treatment of allergic diseases. In this study, we have successfully fabricated a novel paper-based immunoassay device for the detection of sIgE in allergic diseases. We used Can f 1, one of the main dog allergens, as a model allergen to detect sIgE in human sera. To achieve excellent performance, the experimental parameters were optimized. Further, we extended this device for potential applications in the clinical diagnosis of allergic diseases: worthwhile clinical performance in the detection of allergens was achieved as compared to that achieved by commercial enzyme-linked immunosorbent assay (ELISA) kit. Therefore, it was proven that this strategy has the advantages of high-throughput, rapid, sensitive, and highly accurate detection of trace amounts of sIgEs. Furthermore, by simply changing the antigen and antibody, this device could be used for the high-throughput detection of other allergens, so as to achieve multiallergen detection and appropriate desensitization therapy, thereby making it promising in the determination of allergic diseases in clinics.

Two-component ratiometric sensor for Cu2+ detection on paper-based device.

The copper(II) ion (Cu2+) has played an indispensable role in diverse kinds of functional physiological processes of organisms, which has become of growing interest. Despite the fact that numerous Cu2+ test papers using fluorescent probes have been fabricated, sensors featuring the ratiometric property that integrates quenched probes and an inner standard dye are rarely reported. Herein, a two-component ratiometric sensor in a paper-based device is proposed to realize highly selective Cu2+ detection. To overcome shortcomings such as low signal-to-noise ratio and incorrect response of the quenching probe, a novel BODIPY-based turn-off probe (P2017) is designed and introduced into the paper-based device with better water solubility and selectivity for Cu2+ detection. Furthermore, a reference dye (B001), exhibiting an emission at 690 nm when the excitation wavelength is 480 nm, is also introduced into the paper-based device. These two components can enhance the quality of the signal as P2017 is sensitively quenched by Cu2+, while B001 with a photostable property, serving as an internal benchmark, is unable to react with Cu2+. The results indicated that the two components provided a new concept for optimizing paper-based device fabrication and developing accurate, simple, and inexpensive Cu2+ detection methods, which could be potentially applied to monitor human health and the environment in remote areas. Graphical abstract.

Noncontact orientation of objects in three-dimensional space using magnetic levitation.

This paper describes several noncontact methods of orienting objects in 3D space using Magnetic Levitation (MagLev). The methods use two permanent magnets arranged coaxially with like poles facing and a container containing a paramagnetic liquid in which the objects are suspended. Absent external forcing, objects levitating in the device adopt predictable static orientations; the orientation depends on the shape and distribution of mass within the objects. The orientation of objects of uniform density in the MagLev device shows a sharp geometry-dependent transition: an analytical theory rationalizes this transition and predicts the orientation of objects in the MagLev device. Manipulation of the orientation of the levitating objects in space is achieved in two ways: (i) by rotating and/or translating the MagLev device while the objects are suspended in the paramagnetic solution between the magnets; (ii) by moving a small external magnet close to the levitating objects while keeping the device stationary. Unlike mechanical agitation or robotic selection, orienting using MagLev is possible for objects having a range of different physical characteristics (e.g., different shapes, sizes, and mechanical properties from hard polymers to gels and fluids). MagLev thus has the potential to be useful for sorting and positioning components in 3D space, orienting objects for assembly, constructing noncontact devices, and assembling objects composed of soft materials such as hydrogels, elastomers, and jammed granular media.

Tilted Magnetic Levitation Enables Measurement of the Complete Range of Densities of Materials with Low Magnetic Permeability.

Magnetic levitation (MagLev) of diamagnetic or weakly paramagnetic materials suspended in a paramagnetic solution in a magnetic field gradient provides a simple method to measure the density of small samples of solids or liquids. One major limitation of this method, thus far, has been an inability to measure or manipulate materials outside of a narrow range of densities (0.8 g/cm(3) < ρ < 2.3 g/cm(3)) that are close in density to the suspending, aqueous medium. This paper explores a simple method-"tilted MagLev"-to increase the range of densities that can be levitated magnetically. Tilting the MagLev device relative to the gravitational vector enables the magnetic force to be decreased (relative to the magnetic force) along the axis of measurement. This approach enables many practical measurements over the entire range of densities observed in matter at ambient conditions-from air bubbles (ρ ≈ 0) to osmium and iridium (ρ ≈ 23 g/cm(3)). The ability to levitate, simultaneously, objects with a broad range of different densities provides an operationally simple method that may find application to forensic science (e.g., for identifying the composition of miscellaneous objects or powders), industrial manufacturing (e.g., for quality control of parts), or resource-limited settings (e.g., for identifying and separating small particles of metals and alloys).

High-Sensitivity Measurement of Density by Magnetic Levitation.

This paper presents methods that use Magnetic Levitation (MagLev) to measure very small differences in density of solid diamagnetic objects suspended in a paramagnetic medium. Previous work in this field has shown that, while it is a convenient method, standard MagLev (i.e., where the direction of magnetization and gravitational force are parallel) cannot resolve differences in density <10(-4) g/cm(3) for macroscopic objects (>mm) because (i) objects close in density prevent each other from reaching an equilibrium height due to hard contact and excluded volume, and (ii) using weaker magnets or reducing the magnetic susceptibility of the medium destabilizes the magnetic trap. The present work investigates the use of weak magnetic gradients parallel to the faces of the magnets as a means of increasing the sensitivity of MagLev without destabilization. Configuring the MagLev device in a rotated state (i.e., where the direction of magnetization and gravitational force are perpendicular) relative to the standard configuration enables simple measurements along the axes with the highest sensitivity to changes in density. Manipulating the distance of separation between the magnets or the lengths of the magnets (along the axis of measurement) enables the sensitivity to be tuned. These modifications enable an improvement in the resolution up to 100-fold over the standard configuration, and measurements with resolution down to 10(-6) g/cm(3). Three examples of characterizing the small differences in density among samples of materials having ostensibly indistinguishable densities-Nylon spheres, PMMA spheres, and drug spheres-demonstrate the applicability of rotated Maglev to measuring the density of small (0.1-1 mm) objects with high sensitivity. This capability will be useful in materials science, separations, and quality control of manufactured objects.