A Strategy for Enhancing Perpendicular Magnetic Anisotropy in Yttrium Iron Garnet Films.

In future information storage and processing, magnonics is one of the most promising candidates to replace traditional microelectronics. Yttrium iron garnet (YIG) films with perpendicular magnetic anisotropy (PMA) have aroused widespread interest in magnonics. Obtaining strong PMA in a thick YIG film with a small lattice mismatch (η) has been fascinating but challenging. Here, a novel strategy is proposed to reduce the required minimum strain value for producing PMA and increase the maximum thickness for maintaining PMA in YIG films by slight oxygen deficiency. Strong PMA is achieved in the YIG film with an η of only 0.4% and a film thickness up to 60 nm, representing the strongest PMA for such a small η reported so far. Combining transmission electron microscopy analyses, magnetic measurements, and a theoretical model, it is demonstrated that the enhancement of PMA physically originates from the reduction of saturation magnetization and the increase of magnetostriction coefficient induced by oxygen deficiency. The Gilbert damping values of the 60-nm-thick YIG films with PMA are on the order of 10-4. This strategy improves the flexibility for the practical applications of YIG-based magnonic devices and provides promising insights for the theoretical understanding and the experimental enhancement of PMA in garnet films.

Several factors influencing energy-loss near-edge structure calculations using Wien2k.

Electron energy-loss spectroscopy (EELS) is widely applied combining with transmission electron microscopes with high spatial resolution, but its interpretation is a challenging task. One of the reasons is that the factors affecting EELS are very complicated. In this paper, we focus on the several factors involved in density functional theory (DFT) calculations. The sensitivity of calculated energy-loss near-edge structure (ELNES) to spin order, pressure and on-site Coulomb energy U has been discussed. Since EELS technique detects the local environment of atoms, the influence of spin order cannot be ignored. The chemical shifts and peak intensity of ELNES are also closely related to corresponding pressure. The correlation effects are very important for transition metal compounds and play a key role in EELS simulations. An overview of the effects of these factors on the ELNES is presented with the help of Wien2k code. The antiferromagnetic order results in the decreasing of intensities of related peaks and the moving of the peaks to high energy loss. The decreasing of lattice parameters causes the ELNES peaks to shift to high energy loss, and the peak shifts at the higher energy loss are more significant. The increase of correlation effect leads to the ELNES peaks to shift to high energy loss accompanied by the increase of the relative intensity of the peaks which locate at higher energy loss. Our work helps to understand how these factors affect EELS and to explain and predict the experimental EELS spectra. Through the discussion of these factors, we propose that some factors could not be ignored in EELS simulations.

Unprecedented non-hysteretic superelasticity of [001]-oriented NiCoFeGa single crystals.

Superelasticity associated with the martensitic transformation has found a broad range of engineering applications1,2. However, the intrinsic hysteresis3 and temperature sensitivity4 of the first-order phase transformation significantly hinder the usage of smart metallic components in many critical areas. Here, we report a large superelasticity up to 15.2% strain in [001]-oriented NiCoFeGa single crystals, exhibiting non-hysteretic mechanical responses, a small temperature dependence and high-energy-storage capability and cyclic stability over a wide temperature and composition range. In situ synchrotron X-ray diffraction measurements show that the superelasticity is correlated with a stress-induced continuous variation of lattice parameter accompanied by structural fluctuation. Neutron diffraction and electron microscopy observations reveal an unprecedented microstructure consisting of atomic-level entanglement of ordered and disordered crystal structures, which can be manipulated to tune the superelasticity. The discovery of the large elasticity related to the entangled structure paves the way for exploiting elastic strain engineering and development of related functional materials.

Os Doping Suppressed Cu-Fe Charge Transfer and Induced Structural and Magnetic Phase Transitions in LaCu3Fe4-xOsxO12 (x = 1 and 2).

B-site Os-doped quadruple perovskite oxides LaCu3Fe4-xOsxO12 (x = 1 and 2) were prepared under high-pressure and high-temperature conditions. Although parent compound LaCu3Fe4O12 experiences Cu-Fe intermetallic charge transfer that changes the Cu3+/Fe3+ charge combination to Cu2+/Fe3.75+ at 393 K, in the Os-doped samples, the Cu and Fe charge states are found to be constant 2+ and 3+, respectively, indicating the complete suppression of charge transfer. Correspondingly, Os6+ and mixed Os4.5+ valence states are determined by X-ray absorption spectroscopy for x = 1 and x = 2 compositions, respectively. The x = 1 sample crystallizes in an Fe/Os disordered structure with the Im3̅ space group. It experiences a spin-glass transition around 480 K. With further Os substitution up to x = 2, the crystal symmetry changes to Pn3̅, where Fe and Os are orderly distributed in a rocksalt-type fashion at the B site. Moreover, this composition shows a long-range Cu2+(↑)Fe3+(↑)Os4.5+(↓) ferrimagnetic ordering near 520 K. This work provides a rare example for 5d substitution-suppressed intermetallic charge transfer as well as induced structural and magnetic phase transitions with high spin ordering temperature.

High-Pressure Synthesis of a B-site Co2+/Mn4+ Disordered Quadruple Perovskite LaMn3Co2Mn2O12.

A new oxide, LaMn3Co2Mn2O12, was synthesized under high-pressure (7 GPa) and high-temperature (1423 K) conditions. The compound crystallizes in an AA'3B4O12-type quadruple perovskite structure with space group Im3̅. The Rietveld structural analysis combined with soft X-ray absorption spectroscopy reveals the charge combination to be LaMn3+3Co2+2Mn4+2O12, where the La3+ and Mn3+ are 1:3 ordered respectively at the A and A' sites, whereas the Co2+ and Mn4+ are disorderly distributed at the B site. This is in sharp contrast to R2Co2+Mn4+O6 (R = La and rare earth) double perovskites, in which the Co2+ and Mn4+ charge states are always orderly distributed with a rocksalt-type fashion, giving rise to a long-range magnetic ordering. As a result, LaMn3Co2Mn2O12 displays spin glassy magnetic properties due to the random Co2+ and Mn4+ distribution, as demonstrated by dc and ac magnetic susceptibility as well as specific heat measurements. Possible factors that affect the B-site degree of order in perovskite structures are discussed.

A Pressure-Induced Inverse Order-Disorder Transition in Double Perovskites.

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure-induced disordering could require recognition of an order-disorder transition in solid-state physics/chemistry and geophysics. Double perovskites Y2 CoIrO6 and Y2 CoRuO6 polymorphs synthesized at 0, 6, and 15 GPa show B-site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long-range ferrimagnetic ordering in the B-site ordered samples are gradually overwhelmed by B-site disorder. Theoretical calculations suggest that unusual unit-cell compressions under external pressures unexpectedly stabilize the disordered phases of Y2 CoIrO6 and Y2 CoRuO6 .

Two Kinds of Metastable Structures in an Epitaxial Lanthanum Cobalt Oxide Thin Film.

Thin films have attracted much interest because they often have novel properties different from those of their bulk counterparts. In this work, we tune two metastable states in three kinds of lanthanum cobalt oxide thin films by electron beam irradiation and record their dynamic transition process in situ in a transmission electron microscope. The lanthanum cobalt oxide thin films exhibit a homogeneous microstructure in the initial state and then transfer to a stripelike superstructure with 3a0 periodicity (a0 is the perovskite lattice parameter), further developing into a superstructure with 2a0 periodicity in dark stripes (brownmillerite structure). To explore the inherent energy discrepancy within the two metastable states, we perform first-principles calculations on a LaCoO3-δ (0 ≤ δ ≤ 0.5) thin film system by geometry optimization. The calculation results suggest that the forming energy of the 3a0 periodicity stripelike structure is a little lower than that of the 2a0 periodicity in the LaCoO3-δ thin film. Our work explains why the two stripelike structures coexist in lanthanum cobalt oxide thin films and extends prospective applications related to oxygen vacancies in thin films.

Near-Room-Temperature Ferrimagnetic Ordering in a B-Site-Disordered 3d-5d-Hybridized Quadruple Perovskite Oxide, CaCu3Mn2Os2O12.

A new 3d-5d hybridization oxide, CaCu3Mn2Os2O12 (CCMOO), was prepared by high-pressure and high-temperature synthesis methods. The compound crystallizes to an A-site-ordered but B-site-disordered quadruple perovskite structure with a space group of Im3̅ (No. 204). The charge states of the transition metals are determined to be Cu2+/Mn3.5+/Os4.5+ by X-ray absorption spectroscopy. Although most B-site-disordered perovskites possess lower spin-ordering temperatures or even nonmagnetic transitions, the current CCMOO displays a long-range ferrimagnetic phase transition with a critical temperature as high as ∼280 K. Moreover, a large saturated magnetic moment is found to occur [7.8 µB/formula units (f.u.) at 2 K]. X-ray magnetic circular dichroism shows a Cu2+(↑)Mn3.5+(↑)Os4.5+(↓) ferrimagnetic coupling. The corner-sharing Mn/OsO6 octahedra with mixed Mn and Os charge states make the compound metallic in electrical transport, in agreement with a specific heat fitting at low temperature. This work provides a rare example with high spin-ordering temperature and a large magnetic moment in B-site-disordered 3d-5d hybridization perovskite oxides.

Microscopic study of thermoelectric In-doped SnTe.

SnTe is a p-type thermoelectric material that is isostructural with PbTe, for which it is a potential environmentally friendly replacement. By doping the SnTe lattice with In, the thermal conductivity of SnTe can be significantly reduced and the thermoelectric conversion efficiency improved. A large number of precipitates were present in the In-doped SnTe samples; based on atomic-resolution high-angle annular dark-field images and electron energy loss spectra, these precipitates were identified as the zinc-blende phase of In2Te3. Through geometry phase analysis, a new phonon scattering mechanism is discussed.

The Evolution of Microstructure and Magnetic Properties of the Bismuth Layer Compounds with Cobalt Ions Substitution.

One of the core issues for the A/B site doping in the bismuth layer magnetoelectric materials is to find out the evolution of the magnetic structure, crystal structure and elemental distribution, and the coupling effects between spin and lattice with the increase of ion substitution. Here, we have conducted systematic structural and physical property studies on the series samples of Bi5Ti3Fe1-xCoxO15. This work presents that Bi5Ti3Fe1-xCoxO15 forms a single four layer perovskite-like structure for 0 ≤ x < 0.67, while a three layer perovskite-like structure block begins to arise for x ≥ 0.67. With different cobalt content, the sample demonstrates antiferromagnetism, spin state determined magnetism, or magnetic anisotropy determined magnetism. The weak ferromagnetism is considered to be induced by the larger displacement of Co3+ ions from the center of octahedra and the change of the spin state of Co3+ ions. It is also observed that Fe and Co elements are homogeneously substituted in the three layer structure block, accompanied by the rotation (and/or distortion) of BO6 octahedra.

Atomic-scale recognition of surface structure and intercalation mechanism of Ti3C2X.

MXenes represent a large family of functionalized two-dimensional (2D) transition-metal carbides and carbonitrides. However, most of the understanding on their unique structures and applications stops at the theoretical suggestion and lack of experimental support. Herein, the surface structure and intercalation chemistry of Ti3C2X are clarified at the atomic scale by aberration-corrected scanning transmission electron microscope (STEM) and density functional theory (DFT) calculations. The STEM studies show that the functional groups (e.g., OH(-), F(-), O(-)) and the intercalated sodium (Na) ions prefer to stay on the top sites of the centro-Ti atoms and the C atoms of the Ti3C2 monolayer, respectively. Double Na-atomic layers are found within the Ti3C2X interlayer upon extensive Na intercalation via two-phase transition and solid-solution reactions. In addition, aluminum (Al)-ion intercalation leads to horizontal sliding of the Ti3C2X monolayer. On the basis of these observations, the previous monolayer surface model of Ti3C2X is modified. DFT calculations using the new modeling help to understand more about their physical and chemical properties. These findings enrich the understanding of the MXenes and shed light on future material design and applications. Moreover, the Ti3C2X exhibits prominent rate performance and long-term cycling stability as an anode material for Na-ion batteries.

[Docosahexaenoic acid attenuated palmitate-induced insulin resistance in C2C12 cells].

OBJECTIVE: To explore the effects of docosahexaenoic acid (DHA) on palmitate-induced insulin resistance in C2C12 cells. METHODS: Differentiated C2C12 myotubes were used. The gene expression of inflammatory cytokine and insulin signaling pathway were evaluated by quantitative polymerase chain reaction (qPCR) and Western blot. And glucose uptake was measured by [(3)H]-2DG uptake. The levels of reactive oxygen species (ROS) were evaluated by DCF fluorescence. And the activities of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) were measured with a glutathione assay kit. RESULTS: Palmitate-induced cellular insulin resistance was clarified by reduced [(3)H]-2DG uptake and impaired gene expression of insulin signaling pathway (GLUT4, p-IRß and p-IRS-1). DHA decreased the expression of palmitate-caused pro-inflammatory cytokines (MCP-1, IL-6 and iNOS) and oxidative stress and increased the gene expression of insulin signaling pathway (Glut4 and p-IRß). CONCLUSION: Palmitate-induced insulin resistance is accompanied by elevated pro-inflammatory cytokines, oxidative stress and impaired gene expression of insulin signaling pathway. And DHA decreases inflammation and oxidative stress and increases glucose uptake in C2C12 cells. Thus DHA attenuates palmitate-induced insulin resistance.

Room-temperature sub-100 nm Néel-type skyrmions in non-stoichiometric van der Waals ferromagnet Fe3-xGaTe2 with ultrafast laser writability.

Realizing room-temperature magnetic skyrmions in two-dimensional van der Waals ferromagnets offers unparalleled prospects for future spintronic applications. However, due to the intrinsic spin fluctuations that suppress atomic long-range magnetic order and the inherent inversion crystal symmetry that excludes the presence of the Dzyaloshinskii-Moriya interaction, achieving room-temperature skyrmions in 2D magnets remains a formidable challenge. In this study, we target room-temperature 2D magnet Fe3GaTe2 and unveil that the introduction of iron-deficient into this compound enables spatial inversion symmetry breaking, thus inducing a significant Dzyaloshinskii-Moriya interaction that brings about room-temperature Néel-type skyrmions with unprecedentedly small size. To further enhance the practical applications of this finding, we employ a homemade in-situ optical Lorentz transmission electron microscopy to demonstrate ultrafast writing of skyrmions in Fe3-xGaTe2 using a single femtosecond laser pulse. Our results manifest the Fe3-xGaTe2 as a promising building block for realizing skyrmion-based magneto-optical functionalities.

Superconductivity with T c of 116 K discovered in antimony polyhydrides.

Superconductivity (SC) was experimentally observed for the first time in antimony polyhydride. The diamond anvil cell combined with a laser heating system was used to synthesize the antimony polyhydride sample at high pressure and high temperature. In-situ high pressure transport measurements as a function of temperature with an applied magnetic field were performed to study the SC properties. It was found that the antimony polyhydride samples show superconducting transition with critical temperature T c 116 K at 184 GPa. The investigation of SC at magnetic field revealed the superconducting coherent length of ∼40 Å based on the Ginzburg Landau (GL) equation. Antimony polyhydride superconductor has the second highest T c in addition to sulfur hydride among the polyhydrides of elements from main groups IIIA to VIIA in the periodic table.

A novel DEAH-box helicase 37 mutation associated with differences of sex development.

Objective: To determine the genetic etiology of a family pedigree with two patients affected by differences of sex development (DSD). Methods: Assess the clinical characteristics of the patients and achieve exome sequencing results and in vitro functional studies. Results: The 15-year-old proband, raised as female, presented with delayed puberty and short stature associated with atypical genitalia. Hormonal profile showed hypergonadotrophic hypogonadism. Imaging studies revealed the absence of a uterus and ovaries. The karyotype confirmed a 46, XY pattern. Her younger brother presented with a micropenis and hypoplastic scrotum with non-palpable testis and hypospadias. Laparoscopic exploration was performed on the younger brother. Streak gonads were found and removed due to the risk of neoplastic transformation. Post-operative histopathology showed the co-existence of Wolffian and Müllerian derivatives. Whole-exome sequencing identified a novel mutation (c.1223C>T, p. Ser408Leu) in the Asp-Glu-Ala-His-box helicase 37 gene, which was found to be deleterious by in silico analysis. Segregation analysis of the variant displayed a sex-limited, autosomal dominant, maternal inheritance pattern. In vitro experiments revealed that the substitution of 408Ser by Leu caused decreased DHX37 expression both at the mRNA and protein levels. Moreover, the ß-catenin protein was upregulated, and the p53 protein was unaltered by mutant DHX37. Conclusions: We described a novel mutation (c.1223C>T, p. Ser408Leu) of the DHX37 gene associated with a Chinese pedigree consisting of two 46, XY DSD patients. We speculated that the underlying molecular mechanism might involve upregulation of the ß-catenin protein.

Mg Substitution Induced TM/Vacancy Disordering and Enhanced Structural Stability in Layered Oxide Cathode Materials.

Anionic redox is an effective way to increase the capacity of the cathode materials. Na2Mn3O7 [Na4/7[Mn6/7□1/7]O2, □ for the transition metal (TM) vacancies] with native and ordered TM vacancies can conduct a reversible oxygen redox and be a promising high-energy cathode material for sodium-ion batteries (SIBs). However, its phase transition at low potentials (∼1.5 V vs Na+/Na) induces potential decays. Herein, magnesium (Mg) is doped on the TM vacancies to form a disordered Mn/Mg/□ arrangement in the TM layer. The Mg substitution suppresses the oxygen oxidation at ∼4.2 V by reducing the number of the Na-O-□ configurations. Meanwhile, this flexible disordering structure inhibits the generation of the dissolvable Mn2+ ions and mitigates the phase transition at ∼1.6 V. Therefore, the Mg doping improves the structural stability and its cycling performance in 1.5-4.5 V. The disordering arrangement endows Na0.49Mn0.86Mg0.06□0.08O2 with a higher Na+ diffusivity and improved rate performance. Our study reveals that oxygen oxidation is highly dependent on the ordering/disordering arrangements in the cathode materials. This work provides insights into the balance of anionic and cationic redox for enhancing the structural stability and electrochemical performance in the SIBs.

Synthesis of high-quality brookite TiO2 single-crystalline nanosheets with specific facets exposed: tuning catalysts from inert to highly reactive.

The brookite phase of TiO(2) is hardly prepared and rarely studied in comparison with the common anatase and rutile phases. In addition, there exist immense controversies over the cognition of the light-induced liveliness of this material. Here, a novel, low-basicity solution chemistry method was first used to prepare homogeneous high-quality brookite TiO(2) single-crystalline nanosheets surrounded with four {210}, two {101}, and two {201} facets. These nanosheets exhibited outstanding activity toward the catalytic degradation of organic contaminants superior even to that of Degussa P25, due to the exposure of high-energy facets and the effective suppression of recombination rates of photogenerated electrons and holes by these facets as the oxidative and reductive sites. In contrast, irregularly faceted phase-pure brookite nanoflowers and nanospindles were inactive in catalytic reactions. These results demonstrate that the photocatalytic activity of brookite TiO(2) is highly dependent upon its exposed facets, which offers a strategy for tuning the catalysts from inert to highly active through tailoring of the morphology and surface structure.

Correlation between evolution of resistive switching and oxygen vacancy configuration in La0.5Ca0.5MnO3 based memristive devices.

We here report a study of the correlation between the evolution of resistive switching and the oxygen vacancy configuration in La0.5Ca0.5MnO3 (LCMO) based memristive devices. By taking advantage of LCMO located at a phase boundary of the metal-to-insulator transition, we observe the development of the high resistive states, depending upon not only the electrical pulse magnitude but also the switching cycles. We discuss the experimental results by an oxygen migration model that involves both single isolated and clustered oxygen vacancies, which are later verified using aberration-corrected scanning transmission electron microscopy.

Toward highly efficient CdS/CdSe quantum dots-sensitized solar cells incorporating ordered photoanodes on transparent conductive substrates.

A series of ordered photoanodic architectures (including ordered TiO(2) nanotube arrays (TNT), ZnO nanorods, ZnO/TiO(2) core/shell nanostructures) for CdS/CdSe sensitized solar cells (QDSCs), were fabricated directly on transparent conductive oxide glasses by a facile sol-gel assisted template process. The morphologies, optical and electrical properties of TNTs and CdS/CdSe co-sensitized TNTs have been demonstrated. The effect of CdSe deposition time on the cell performance was clarified, and the growth mechanism of the CdSe quantum dots on the surface of the TNTs has been proposed as well. Furthermore, the evolution of open-circuit photovoltage (V(oc)) towards CdSe deposition time has been investigated by electrochemical impedance spectroscopy (EIS). A promising light-to-electricity conversion efficiency of up to 4.61% has been achieved with 3 µm long TNT arrays, which is the best record for sandwich-type ordered TNT-based QDSCs.

Chirality flips of skyrmion bubbles.

The investigation of three-dimensional magnetic textures and chirality switching has attracted enormous interest from the perspective of fundamental research. Here, the three-dimensional magnetic structures of skyrmion bubbles in the centrosymmetric magnet MnNiGa were reconstructed with the vector field tomography approach via Lorentz transmission electron microscopy. The magnetic configuration of the bubbles was determined based on the reconstructed magnetic induction (B-field) at their surfaces and centers. We found that the bubbles easily switched their chirality but preserved their polarity to retain their singularity in the matrix of the material. Our results offer valuable insights into the chirality behavior of skyrmion bubbles.