Synergistic Effect of Ti3C2Tx MXene Nanosheets and Tannic Acid-Fe3+ Network in Constructing High-Performance Hydrogel Composite Membrane for Photothermal Membrane Distillation.

Photothermal membrane distillation (PMD) has emerged as a promising and sustainable approach for seawater desalination and wastewater purification. However, the wide application of the technique is severely impeded by low freshwater production and membrane fouling/wetting issues. Herein, we developed an advanced hydrogel-engineered membrane with simultaneously enhanced photothermal conversion capacity and desired fouling and wetting resistance for PMD. By the synergies of photothermal Ti3C2Tx MXene nanosheets and the tannic acid-Fe3+ network in the hydrogel, the membrane was endowed with excellent surface self-heating ability, yielding the highest freshwater production rate (1.71 kg m-2 h-1) and photothermal efficiency among the fabricated hydrogel composite membranes under 1 sun irradiation. Meanwhile, the PMD membrane could robustly resist oil-induced fouling and surfactant-induced wetting, significantly extending the membrane lifespan in treating contaminated saline water. Furthermore, when desalinating real seawater, the membrane exhibited superior durability with a stable vapor flux and excellent ion rejection (e.g., 99.24% for boron) for 100 h.

Polyfunctional Arylamine Based Nanofiltration Membranes with Enhanced Aggressive Organic Solvents Resistance.

Organic solvent nanofiltration (OSN) membranes with high separation performance and excellent stability in aggressive organic solvents are urgently desired for chemical separation. Herein, we utilized a polyfunctional arylamine tetra-(4-aminophenyl) ethylene (TAPE) to prepare a highly cross-linked polyamide membrane with a low molecular weight cut-off (MWCO) of 312 Da. Owing to its propeller-like conformation, TAPE formed micropores within the polyamide membrane and provided fast solvent transport channels. Importantly, the rigid conjugated skeleton and high connectivity between micropores effectively prevented the expansion of the polyamide matrix in aggressive organic solvents. The membrane maintained high separation performance even immersed in N,N-dimethylformamide for 90 days. Based on the aggregation-induced emission (AIE) effect of TAPE, the formation of polyamide membrane can be visually monitored by fluorescence imaging technology, which achieved visual guidance for membrane fabrication. This work provides a vital foundation for utilizing polyfunctional monomers in the interfacial polymerization reaction to prepare high-performance OSN membranes.

Molecular Dynamics Study on the Effect of Polyacrylamide on Electric Field Demulsification of Oil-in-Water Emulsion.

The effect of the water-soluble polymer (partially hydrolyzed polyacrylamide, HPAM) in produced water on the demulsification process of the electric field was studied by molecular dynamics simulations. By comparing the coalescence process of oil droplets in the electric field environment with or without HPAM, we find that HPAM in the water phase can promote the coalescence of nearly oil droplets but hinder the deformation and migration of oil droplets. By analyzing the radial distribution function and interaction energy between molecules, we conclude that the existence of HPAM molecules can reduce the hydrophilicity of other molecules through their strong interaction with water, and sodium ions (Na+) have strong interaction with bound water in the process of breaking away from HPAM, thus leading the movement of water molecules. At the same time, the influence of HPAM molecules located between the two oil droplets on the demulsification process was also studied. The HPAM molecules and sodium ions located between the two oil droplets also affected the coalescence process of oil droplets under an electric field by interacting with water.

Thin-Film Composite Membranes Interlayered with Amphiphilic MoS2 Nanosheets via Controllable Interfacial Polymerization for Enhanced Desalination Performance.

Polyamide (PA)-based nanofiltration (NF) membranes have demonstrated extensive applications for a sustainable water-energy-environment nexus. A rational control of interfacial polymerization (IP) is highly efficacious to enhance NF separation performance yet remains a technical challenge. Herein, we proposed a regulation strategy of constructing amphiphilic molybdenum disulfide/cetyltrimethylammonium bromide interlayer atop the Kevlar hydrogel substrate. The amphiphilic nanosheet interlayered NF membrane exhibited a crumpled PA surface with an elevated cross-linking degree of 76.9%, leading to an excellent water permeance (16.8 L m-2 h-1 bar-1) and an impressive Na2SO4 rejection (99.1%). Meanwhile, the selectivity coefficient of Na2SO4/NaCl of the optimized TFC membrane reached 91, surpassing those of the recently reported NF membranes. Moreover, the optimized membrane exhibited a desirable rejection of over 90% against Mn2+ and Cu2+ in actual textile wastewater. Importantly, the underlying NF membrane formation mechanism was elucidated via both experiments and molecular simulations. The synchronous control of mass and heat transfer of IP process offers a new methodology for the state-of-the-art membrane fabrication, which opens more avenues in softening of brackish water and purification of industrial wastewater containing heavy metal ions.

Hypercrosslinked Hydrogel Composite Membranes Targeted for Removal of Volatile Organic Compounds via Selective Solution-Diffusion in Membrane Distillation.

Membrane distillation (MD) has attracted considerable interest in hypersaline wastewater treatment. However, its practicability is severely impeded by the ineffective interception of volatile organic compounds (VOCs), which seriously affects the product water quality. Herein, a hypercrosslinked alginate (Alg)/aluminum (Al) hydrogel composite membrane is facilely fabricated via Alg pregel formation and ionic crosslinking for efficient VOC interception. The obtained MD membrane shows a sufficient phenol rejection of 99.52% at the phenol concentration of 100 ppm, which is the highest rejection among the reported MD membranes. Moreover, the hydrogel composite membrane maintains a high phenol interception (>99%), regardless of the feed temperature, initial phenol concentration, and operating time. Diffusion experiments and molecular dynamics simulation verify that the selective diffusion is the dominant mechanism for VOCs-water separation. Phenol experiences a higher energy barrier to pass through the dense hydrogel layer compared to water molecules as the stronger interaction between phenol-Alg compared with water-Alg. Benefited from the dense and hydratable Alg/Al hydrogel layer, the composite membrane also exhibits robust resistance to wetting and fouling during long-term operation. The superior VOCs removal efficiency and excellent durability endow the hydrogel composite membrane with a promising application for treating complex wastewater containing both volatile and nonvolatile contaminants.

New insight into the role of the self-assembly of heteroatom compounds in heavy oil viscosity enhancement.

Unveiling the role of heteroatom compounds in heavy oil viscosity is pivotal for finding targeted viscosity reduction methods to improve oil recovery. This research investigates the impact of heteroatoms in asphaltene molecules by utilizing quantum chemical calculations and molecular dynamics simulations to analyze their electrostatic potential characteristics, pairwise interactions, and dynamic behavior within realistic reservoirs. Heteroatom compounds can influence the molecular-level properties of asphaltenes and thus impact the macroscopic behavior of heavy oils. Research results suggest that the presence of ketone and aromatic rings in asphaltene molecules leads to the unrestricted movement of pi electrons due to their collective electronegativity. Two distinct configurations of asphaltene dimers, face-to-face, and edge-to-face, were observed. Intermolecular interactions were predominantly governed by van der Waals forces, highlighting their significant role in stabilizing asphaltene aggregates. The distribution of asphaltene molecules in the oil phase can be summarized as the "rebar-cement" theory. In the heteroatom-free system, the face-to-face peaks in the radial distribution function exhibit significantly reduced magnitudes compared to those in the heteroatom-containing system. This emphasizes the pivotal function of heteroatoms in connecting molecular components to form a more compact asphaltene structure, which may result in a higher viscosity of heavy oil. These findings give insight into the significance of heteroatoms in bridging molecular components and shaping the intricate structure of asphaltene and advance our understanding of heavy oil viscosity properties.

Exploring the Depth-Dependent Microviscosity inside a Micelle Using Butterfly-Motion-Based Fluorescent Probes.

The viscosity distribution of micellar interiors from the very center to the outer surface is dramatically varied, which has been distinguished in theoretical models, yet it remains highly challenging to quantify this issue experimentally. Herein, a series of fluorophore-substituted surfactants DPAC-Fn (n = 3, 5, 7, 9, 11, 13, and 15) are developed by functionalizing the different alkyl-trimethylammonium bromides with the butterfly motion-based viscosity sensor, N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC). The immersion depth of DPAC units of DPAC-Fn in cetrimonium bromide (C16TAB) micelles depends on the alkyl chain lengths n. From deep (n = 15) to shallow (n = 3), DPAC-Fn in C16TAB micelles exhibits efficient viscosity-sensitive dynamic multicolor emissions. With external standards for quantification, the viscosity distribution inside a C16TAB micelle with the size of ∼4 nm is changed seriously from high viscosity (∼190 Pa s) in the core center to low viscosity (∼1 Pa s) near the outer surface. This work provides a tailored approach for powerful micelle tools to explore the depth-dependent microviscosity of micellar interiors.

Molecular Insights into Cyclodextrin-Adamantane-Modified Copolymer Host-Guest Interactions.

Supramolecular polymer flooding has great potential in solving the problems of difficult injection and low recovery in low-permeability polymer reservoirs. However, the self-assembly mechanism of supramolecular polymers is not yet to be fully understood at the molecular level. In this work, molecular dynamics simulations were used to explore the formation of cyclodextrin and adamantane-modified supramolecular polymer hydrogels; the self-assembly mechanism was summarized; and the effect of concentration on the oil displacement index was evaluated. The assembly mechanism of supramolecular polymers can be attributed to the "node-rebar-cement" mode of action. At the same time, Na+ can form intermolecular and intramolecular salt bridges with supramolecular polymers, and together with the "node-rebar-cement" mode of action, the supramolecular polymers can form a more compact 3D network structure. When the polymer concentration was increased, especially up to its critical association concentration (CAC), the association increased significantly. Besides, the construction of a 3D network was promoted, which results in a higher viscosity. This work investigated the assembly process of supramolecular polymers from the molecular scale and explained its mechanism of action, which makes up for the deficiencies of other research methods and provides a theoretical basis for screening out functional units that can be used for the supramolecular polymer assembly.

Insights into the pH-dependent interactions of sulfadiazine antibiotic with soil particle models.

Sulfonamide antibiotics (SAs) are widely used as a broad-spectrum antibiotic, leading to global concerns due to their potential soil accumulation and subsequent effects on ecosystems. SAs often exhibit remarkable environmental persistence, necessitating further investigation to uncover the ultimate destiny of these molecules. In this work, molecular dynamics simulations combined with complementary quantum chemistry calculations were employed to investigate the influence of pH on the behavior of sulfadiazine (SDZ, a typical SAs) in soil particle models (silica, one of the main components of soil). Meanwhile, the quantification of SDZ molecules aggregation potential onto silica was further extended. SDZ molecules tend to form a monolayer on the soil surface under acidic conditions while forming aggregated adsorption on the surface under neutral conditions. Due to the hydrophilicity of the silica, multiple hydration layers would form on its surface, hindering the further adsorption of SDZ molecules on its surface. The calculated soil-water partition coefficient (Psoil/water) of SDZ+ and SDZ were 9.01 and 7.02, respectively. The adsorption evaluation and mechanisms are useful in controlling the migration and transformation of SAs in the soil environment. These findings provide valuable insights into the interactions between SDZ and soil components, shedding light on its fate and transport in the environment.

Theoretical investigation of asphaltene molecules in crude oil viscoelasticity enhancement.

Understanding the mechanisms of viscosity enhancement in crude oil phases is crucial for optimizing extraction and transportation processes. The enhanced viscosity mechanism of crude oil phase can be attributed to the intricate intermolecular interactions between asphaltene molecules. However, the molecular mechanism of the viscosification of asphaltene molecules in crude oil is not yet to be fully understood. In this work, molecular dynamics simulations were employed to investigate the dynamic behavior and viscosification mechanism of asphaltene molecules in complex oil phases. Research suggests that the neutral surface of asphaltenes features abundant positive and negative electrostatic potential regions, facilitating complementary pairing between these areas. This significantly augments electrostatic interactions among asphaltene molecules. Besides, the expansive nonpolar expanse on the normal asphaltene surface facilitates interactions between asphaltenes and crude oil molecules. This leads the crude oil viscosity of the system containing normal asphaltene is higher than that of the system containing acidic asphaltene under the same mass fraction (382 µ Pa·s for AAsp and 416 µ Pa·s for NAsp). This work provides insight into the viscosity enhancement mechanisms in crude oil phases and is helpful in improving the efficiency of crude oil extraction and transportation.

Insights into the silica scaling behaviors in membrane distillation and anti-scaling mechanism of functional polymers.

Silica scaling imposes a significant limitation on the efficacy of membrane distillation (MD) in the treatment of hypersaline wastewater. The complex dynamic behaviors of silica at the membrane-water-air interface and the poor understanding of molecular-level anti-scaling mechanism hampers the development of effective antiscalants for mitigating silica scaling in MD. Despite using functional polymers to prevent silica polymerization, the inhibition mechanisms are unclear. Here, the kinetic process of silica scaling during MD and the potential anti-scaling mechanism of poly-ethylenimine (PEI) were investigated at the molecular level via molecular dynamics simulations. The investigation reveals that silica scales were more likely to adhere to the water-PTFE interface with a free energy potential well of -40.0 kJ mol-1 than that of the water-air interface with a -11.4 kJ mol-1 potential well. Silica scales falling at the water-air interface also migrated on the water-air interface until captured by the PTFE membrane. In this work, a representative functional amino-rich polymer PEI was constructed as silica inhibitors and its scale inhibition mechanism was elucidated. Notably, the inclusion of PEI increased the free-energy barriers for the silica polymerization reaction from 72.0 kJ mol-1 to 86.1 kJ mol-1, compared to scenarios without the antiscalants. Moreover, quantitative structure-activity relationships (QSAR) model of ΔGwater-silica was developed to predict the anti-scaling efficiencies of typical antiscalants based on machine learning method. These findings provide valuable insights into enhancing the efficiency of silica scaling mitigation strategies.

Models of the Three-Component Bilayer of Stratum Corneum: A Molecular Simulation Study.

The construction of the stratum corneum (SC) is crucial to the problems of transdermal drug delivery. SC consists of the keratinocyte layers and the lipid matrix surrounding it. Among them, the lipid matrix is the barrier for many exogenous molecules, mainly composed of ceramides (CERs), free fatty acids (FFA), and cholesterol (CHOL). In this work, we developed single-component (CERs, CER-NS, and CER-EOS) and six three-component models, and each model was simulated by using the GROMOS-54A7 force field. Short-period phase (SPP) and long-period phase (LPP) systems were established separately, and area per lipid (APL), thickness, order of carbon chain (SCD), and density distribution were analyzed. The transition of CER-NS and CER-EOS in LPP was observed. The results of hydrogen bonds in the lipid systems indicated that a strong hydrogen-bond network was formed between the skin-lipid bilayers. Umbrella sampling method simulations were performed to calculate the free energy change of ethanol moving into the skin-lipid bilayer. The results revealed that ethanol molecules pulled some water molecules into the membrane when they passed through SPP-1. Our findings provided some insights and models of the stratum corneum that could be used for the subsequent mechanism of macromolecule permeation through membranes in drugs, cosmetics, and so on.

Molecular insights into the adsorption and penetration of oil droplets on hydrophobic membrane in membrane distillation.

Membrane fouling induced by oily substances significantly constrains membrane distillation performance in treating hypersaline oily wastewater. Overcoming this challenge necessitates a heightened fundamental understanding of the oil fouling phenomenon. Herein, the adsorption and penetration mechanism of oil droplets on hydrophobic membranes in membrane distillation process was investigated at the molecular level. Our results demonstrated that the adsorption and penetration of oil droplets were divided into four stages, including the free stage, contact stage, spreading stage, and equilibrium stage. Due to the extensive non-polar surface distribution of the polytetrafluoroethylene (PTFE) membrane (comprising 95.41 %), the interaction between oil molecules and PTFE was primarily governed by van der Waals interaction. Continuous oil droplet membrane fouling model revealed that the new oil droplet molecules preferred to penetrate into membrane pores where oil droplets already existed. The penetration of resin (a component of medium-quality oil droplets) onto PTFE membrane pores required the "pre-paving" of light crude oil. Finally, the ΔE quantitative structure-activity relationships (QSAR) models were developed to evaluate the penetration mechanism of pollutant molecules on the PTFE membrane. This research provides new insights for improving sustainable membrane distillation technologies in treating saline oily wastewater.

Molecular Dynamics Simulations of Supramolecular Polymers within Nanoconfinements for Enhanced Oil Recovery.

Supramolecular polymers offer promising potential for enhanced oil recovery (EOR) advancing techniques. Current instrumental analyses face limitations in capturing instantaneous intracomplex motions due to temporal and spatial constraints. The molecular mechanism of supramolecular polymer transport behavior within nanoconfinement is not yet fully understood. Therefore, the self-assembly mechanism of ß-cyclodextrin (ß-CD) and adamantane (ADA)-modified supramolecular polymers (p-AA-ß-CD-ADA) was delved into in this work. Further exploration focuses on the translocation dynamics of p-AA-ß-CD-ADA within nanoconfinement under external driving forces. Results suggest that ß-CD and ADA in p-AA-ß-CD-ADA were assembled into nodes in the form of a host and a guest, combining with a "node-rebar-cement" interaction model encapsulating the formation mechanism of these supramolecular polymers. The heightened density of the hydrate layers at the nanoscale pore throats acts as a constraining factor, resulting in restricted mobility and altered dynamics of the supramolecular polymers. During passage through nanopore throats, host-guest molecules within the supramolecular polymer experience noncovalent dissociation. Notably, these supramolecular polymers exhibit remarkable self-healing capabilities, reinstating their assembly state upon traversing pore throats. This work provides a molecular-level comprehension of the potential utility of supramolecular polymers in EOR processes, offering valuable information for the molecular design of polymers employed for EOR in low-permeability reservoirs.

Understanding the transformations of nanoplastic onto phospholipid bilayers: Mechanism, microscopic interaction and cytotoxicity assessment.

The ubiquitous nanoplastics are now considered emergent pollutants in environments. Bioaccumulation of nanoplastics is an important indicator of their hazard. In this work, molecular dynamics were used to study the uptake of five nanoplastics (polyvinyl chloride (PVC), polystyrene (PS), polylactic acid (PLA), polypropylene (PP), and polyethylene terephthalate (PET)) onto DPPC (dipalmitoylphosphatidylcholine) bilayers. Results suggest that nanoplastics became compact after they were deposited in the human body. For PET, PLA, and PS nanoplastics, a free energy barrier of 4-22 kcal mol-1 needed to be overcome to transfer these polymers from the interface region to the center of the DPPC bilayer. Besides, the free energy difference of PVC and PP from the bulk H2O to the surface of DPPC was -18.67 kcal mol-1 and -25.94 kcal mol-1, respectively. After uptake, the interaction between nanoplastics and lipid bilayer was dominated by the van der Waals rather than electrostatic interaction. Furthermore, the cytotoxicity of nanoplastics was also evaluated and it is reflected in their ability to decrease the thickness of the lipid bilayer. Overall, this work provides implications for understanding the bioaccumulation and toxicity of nanoplastic at the molecular level.

Contribution of air-water interface in removing PFAS from drinking water: Adsorption, stability, interaction and machine learning studies.

As a class of synthetic persistent organic pollutants, contamination of Per-and poly-fluoroalkyl substances (PFAS) in drinking water has attracted widespread concern. Aeration has been confirmed to enhance the removal of PFAS in drinking water by activated carbon (AC). However, the contribution of the air-water interface in removing PFAS is not yet to be fully understood at the molecular level. In this work, molecular dynamics (MD) simulations were employed to investigate the role of nanobubble in removing PFAS in the aqueous environment. The result suggests that the free energies of the air-water interface are about 3-7 kcal mol-1 lower than that of the bulk water region, indicating that the transformation of PFAS from the water phase into the air-water interface is favorable from the viewpoint of thermodynamics. The interface-water partition coefficients (Psur/wat) of PFAS are in the order of PFOS > PFOA > PFHxS > PFBS. On the air-water-AC three-phase interface, PFBS can not only move along the interface region but also leave the interface region into water phase, while PFOS tended to move along the interface region until it was captured by AC. Finally, the ΔGwater-interface quantitative structure-activity relationships (QSAR) models were developed to predict the removal efficiencies of PFAS enhanced by aeration in aquatic systems. The proposed mechanism promotes the understanding of the contribution of air-water interface in removing PFAS from drinking water by activated carbon.

A pH-indicating smart tag based on porous hydrogel as food freshness sensors.

HYPOTHESIS: The pH-indicating smart packaging and tags are identified within the general research and pH colorimetric smart tags are effective, non-invasive methods for indicating food freshness on a real-time basis, but their sensitivity is limited. EXPERIMENTS: In Herin, we developed a porous hydrogel with high sensitivity, water content, modulus, and safety. Hydrogels were prepared with gellan gum, starch, and anthocyanin. The phase separations provide an adjustable porous structure, which can enhance the capture and transformation of gas from food spoilage, hence improving the sensitivity. Hydrogel is physically crosslinked by the entanglement of chains through freeze-thawing cycles, and porosity can be adjusted by the addition of starch, so avoiding the use of toxicity crosslinkers and porogen. FINDINGS: Our study demonstrates that the gel undergoes an obvious color shift during the spoilage of milk and shrimp, revealing its potential application as a smart tag signaling food freshness.

Theoretical insights into the uptake of sulfonamides onto phospholipid bilayers: Mechanisms, interaction and toxicity evaluation.

Sulfonamides (SAs) are now recognized as the main emerging environmental pollutants in aquatic environments. Although the bioaccumulation capacities of SAs have been confirmed, the pathway for the penetration of the SAs into lipid bilayer has been not fully understood. In this study, the bioaccumulation mechanism of four typical SAs onto the dipalmitoyl phosphatidylcholine (DPPC) lipid bilayer and their effects on the properties of DPPC bilayer were employed and evaluated respectively by using molecular dynamics simulations. Results show that from the viewpoint of thermodynamics, it is favorable for these SAs partitioning to DPPC bilayer. The accommodation of four SAs onto the lipid membrane needs to undergo several processes, which include the contact stage, transformation stage, and absorption stage. Besides, the sulfamethoxazole (SMX) and sulfamethazine (SMZ) show a strong preference for the DPPC phase rather than the interface region while the sulfadiazine (SDZ) and sulfametoxydiazine (SMD) have similar tendencies in the interface region and DPPC phase. Furthermore, the cytotoxicity of SAs is reflected in their ability to affect the electrostatic potential of the membrane and to reduce the thickness of phospholipid bilayers. This molecular-level study provided an insightful understanding of the toxicity and bioaccumulation of SAs.

Atomistic insights into heterogeneous reaction of formic acid on mineral oxide particles.

The heterogeneous reaction between formic acid and mineral dust play an important role in tropospheric chemistry. However, the molecular mechanism on formic acid uptake on mineral dust is not yet to be fully understood. In our work, a comprehensive and multiscale theoretical study (include density functional theory, DFT calculations and reactive molecular dynamics, RMD simulations) has been provided to investigate this heterogeneous reaction at molecular level. The results of DFT calculations show that the SiO2 and TiO2 particles have a strong tendency to adsorb formic acid to its surface, and the attractive part of the binding energy was dominated by electrostatic component. RMD simulations show that the uptake of formic acid and water on TiO2 particles would modified TiO2 particles, which formed Ti-OH and Ti-OCHO on particle surface. Besides, the formic acid coordination surface modes were dominated by the monodentate formate mode rather than bidentate formate mode. The molecular level study is helpful for understanding the accumulation of formic acid on mineral dust particles and global balance of atmospheric formic acid.

Mechanistic study of the adsorption and penetration of modified SiO2 nanoparticles on cellular membrane.

SiO2 nanoparticles (NPs) are ubiquitous in the atmosphere and have been proved to be harmful to human by bioaccumulation. The bioaccumulation of SiO2 NPs begins with their partitioning into membrane phospholipids. However, the uptake of SiO2 particle onto lipid bilayers has been not completely understood. In this study, the uptake process of different modified SiO2 particles (with adsorbed trace gas molecules, including formic acid (FA), methyl vinyl ketone (MVK), and methacrolein (MAC)) into DPPC bilayers were investigated by molecular dynamics (MD) simulations. Results suggest that after the SiO2 particle absorbed on the surface of bilayers, it spun by itself to form the most stable adsorption configurations. MAC and MVK molecule tend to be absorbed into DPPC bilayer while FA molecule was more likely located at the surface region of bilayer from the viewpoint of thermodynamics. Besides, it was also found apart from the commonly accepted "Trojan-horse" effect, SiO2 NPs may increase biohazard via modulating the concentration of pollutants. This work is beneficial for understanding the toxicity and bioaccumulation of FA, MVK, MAC, and SiO2 NPs at molecular level.