The development and use of an innovative laboratory method for measuring arsenic in drinking water from western Bangladesh.

All of Bangladesh's approximately 10 million drinking-water tube wells must be periodically tested for arsenic. The magnitude of this task and the limited resources of Bangladesh have led to the use of low-cost, semiquantitative field kits that measure As to a relatively high 50 microg/L national drinking water standard. However, there is an urgent need to supplement and ultimately replace these field kits with an inexpensive laboratory method that can measure As to the more protective 10 microg/L World Health Organization (WHO) health-based drinking water guideline. Unfortunately, Bangladesh has limited access to atomic absorption spectrometers or other expensive instruments that can measure As to the WHO guideline of 10 microg/L. In response to this need, an inexpensive and highly sensitive laboratory method for measuring As has been developed. This new method is the only accurate, precise, and safe way to quantify As < 10 microg/L without expensive or highly specialized laboratory equipment. In this method, As is removed from the sample by reduction to arsine gas, collected in an absorber by oxidation to arsenic acid, colorized by a sequential reaction to arsenomolybdate, and quantified by spectrophotometry. We compared this method with the silver diethyldithiocarbamate [AgSCSN(CH2CH3)2] and graphite furnace atomic absorption spectroscopy (GFAAS) methods for measuring As. Our method is more accurate, precise, and environmentally safe than the AgSCSN(CH2CH3)2 method, and it is more accurate and affordable than GFAAS. Finally, this study suggests that Bangladeshis will readily share drinking water with their neighbors to meet the more protective WHO guideline for As of 10 microg/L.

Public health strategies for western Bangladesh that address arsenic, manganese, uranium, and other toxic elements in drinking water.

BACKGROUND: More than 60,000,000 Bangladeshis are drinking water with unsafe concentrations of one or more elements. OBJECTIVES: Our aims in this study were to evaluate and improve the drinking water testing and treatment plans for western Bangladesh. METHODS: We sampled groundwater from four neighborhoods in western Bangladesh to determine the distributions of arsenic, boron, barium, chromium, iron, manganese, molybdenum, nickel, lead, antimony, selenium, uranium, and zinc, and to determine pH. RESULTS: The percentages of tube wells that had concentrations exceeding World Health Organization (WHO) health-based drinking water guidelines were 78% for Mn, 48% for U, 33% for As, 1% for Pb, 1% for Ni, and 1% for Cr. Individual tube wells often had unsafe concentrations of both Mn and As or both Mn and U. They seldom had unsafe concentrations of both As and U. CONCLUSIONS: These results suggest that the ongoing program of identifying safe drinking water supplies by testing every tube well for As only will not ensure safe concentrations of Mn, U, Pb, Ni, Cr, and possibly other elements. To maximize efficiency, drinking water testing in Bangladesh should be completed in three steps: 1) all tube wells must be sampled and tested for As; 2) if a sample meets the WHO guideline for As, then it should be retested for Mn and U; 3) if a sample meets the WHO guidelines for As, Mn, and U, then it should be retested for B, Ba, Cr, Mo, Ni, and Pb. All safe tube wells should be considered for use as public drinking water supplies.