Organic Electrochemical Transistor with MoS2 Nanosheets Modified Gate Electrode for Sensitive Glucose Sensing.

An organic electrochemical transistor (OECT) with MoS2 nanosheets modified on the gate electrode was proposed for glucose sensing. MoS2 nanosheets, which had excellent electrocatalytic performance, a large specific surface area, and more active sites, were prepared by liquid phase ultrasonic exfoliation to modify the gate electrode of OECT, resulting in a large improvement in the sensitivity of the glucose sensor. The detection limit of the device modified with MoS2 nanosheets is down to 100 nM, which is 1~2 orders of magnitude better than that of the device without nanomaterial modification. This result manifests not only a sensitive and selective method for the detection of glucose based on OECT but also an extended application of MoS2 nanosheets for other biomolecule sensing with high sensitivity.

Metal organic framework-coated gold nanorod as an on-demand drug delivery platform for chemo-photothermal cancer therapy.

Chemo-photothermal therapy based on nanoparticles has emerged as a promising strategy for cancer treatment. However, its therapeutic efficacy and application potential are largely subjected to the uncontrollability and biotoxicity of functional nanoplatforms. Herein, a novel biocompatible and biodegradable metal organic framework (MOF), which was constructed by growing crystalline zeolitic imidazolate framework-8 on gold nanoroad (Au@ZIF-8), was designed and fabricated for efficient drug loading and controlled release. Owing to the large surface area and guest-matching pore size of ZIF-8, doxorubicin (DOX) was successfully loaded into the Au@ZIF-8 with a high drug loading efficiency of ~ 37%. Under NIR light or weakly acidic environment, the ZIF-8 layer was quickly degraded, which resulted in an on-demand drug release in tumour site. More importantly, under the irradiation of near infrared (NIR) laser, highly efficient cancer treatment was achieved in both in vitro cell experiment and in vivo tumour-bearing nude mice experiment due to the synergistic effect of photothermal (PTT) therapy and chemotherapy. In addition, the in vivo study revealed the good biocompatibility of Au@ZIF-8. This work robustly suggested that Au@ZIF-8 could be further explored as a drug delivery system for chemo-photothermal synergistic therapy.

g-C3N4/Pt/BiVO4 nanocomposites for highly efficient visible-light photocatalytic removal of contaminants and hydrogen generation.

Inspired by natural photosynthesis, artificial heterojunction photocatalysts have been extensively studied. Herein, a novel ternary graphitic carbon nitride/platinum/bismuth vanadate (g-C3N4/Pt/BiVO4) photocatalytic system was successfully synthesized, where Pt/BiVO4 nanosheet is anchored on the surface of layered g-C3N4, as evidenced by structural observations. Ultraviolet photoelectron spectroscopy and ultraviolet-visible diffuse reflectance spectroscopy are carried out to identify the position of the conduction band and valence band. A Z-scheme is used to interpret the superior photocatalytic performance of g-C3N4/Pt/BiVO4 and further verified by the capture of free radicals and terephthalic acid photoluminescence experiments. Compared with the g-C3N4/BiVO4 binary system, the Z-scheme g-C3N4/Pt/BiVO4 photocatalyst not only possesses enhanced carrier separation efficiency but also maintains sufficient redox properties, thus inducing superior photocatalytic activity. More importantly, the novel Z-scheme photocatalyst exhibits excellent recycle stability, which could provide inspiration for the rational design of efficient and practical photocatalysts for environmental pollution treatment. The ternary photocatalyst also exhibits significantly enhanced visible-light photocatalytic hydrogen production performance.

Al-based metal organic framework derived self-assembled carbon nanosheets as innovative anodes for Li- and Na-ion batteries.

Functional modification and structural design of carbon electrode materials are considered as a cost-effective method to improve their electrochemical performance. In this study, a solvothermal method is applied to realize self-assembly of the metal-organic framework. After simple carbonization and acid treatment, carbon nanosheets with 2D adjustable defective sub-units are successfully prepared for the first time. It is found that carbonization temperature has a significant effect on the carbon skeleton structure. The optimal nanostructures with large specific surface area and appropriate pore size distribution make self-assembled carbon nanosheets having excellent Li/Na-ion storage properties. In addition, the adjustable carbon skeleton structure can effectively avoid irreversible damage when charge-discharge cycles. For Li-ion batteries, a specific capacity of 825 mAh g-1 is achieved after 100 cycles at 100 mA g-1, while for Na-ion batteries a specific capacity of 193 mAh g-1 is observed after 100 cycles at 100 mA g-1. Moreover, for Na-ion batteries, even at a high rate of 1000 mA g-1 the material delivers a specific capacity of 109.5 mAh g-1 after 3500 cycles.

Facile Synthesis of Ultrahigh-Surface-Area Hollow Carbon Nanospheres and their Application in Lithium-Sulfur Batteries.

Hollow carbon nanospheres (HCNs) with specific surface areas up to 2949 m2 g-1 and pore volume up to 2.9 cm3 g-1 were successfully synthesized from polyaniline-co-polypyrrole hollow nanospheres by carbonization and CO2 activation. The cavity diameter and wall thickness of HCNs can be easily controlled by activation time. Owing to their large inner cavity and enclosed structure, HCNs are desirable carriers for encapsulating sulfur. To better understand the effects of pore characteristics and sulfur contents on the performances of lithium-sulfur batteries, three composites of HCNs and sulfur are prepared and studied in detail. The composites of HCNs with moderate specific surface areas and suitable sulfur content present a better performance. The first discharge capacity of this composite reaches 1401 mAh g-1 at 0.2 C. Even after 200 cycles, the discharge capacity remains at 626 mAh g-1 .

1-Butyl-3-Methylimidazolium Tetrafluoroborate Film as a Highly Selective Sensing Material for Non-Invasive Detection of Acetone Using a Quartz Crystal Microbalance.

Breath acetone serves as a biomarker for diabetes. This article reports 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), a type of room temperature ionic liquid (RTIL), as a selective sensing material for acetone. The RTIL sensing layer was coated on a quartz crystal microbalance (QCM) for detection. The sensing mechanism is based on a decrease in viscosity and density of the [bmim][BF4] film due to the solubilization of acetone leading to a positive frequency shift in the QCM. Acetone was detected with a linear range from 7.05 to 750 ppmv. Sensitivity and limit of detection were found to be 3.49 Hz/ppmv and 5.0 ppmv, respectively. The [bmim][BF4]-modified QCM sensor demonstrated anti-interference ability to commonly found volatile organic compounds in breath, e.g., isoprene, 1,2-pentadiene, d-limonene, and dl-limonene. This technology is useful for applications in non-invasive early diabetic diagnosis.

A Novel Organic Electrochemical Transistor-Based Platform for Monitoring the Senescent Green Vegetative Phase of Haematococcus pluvialis Cells.

The freshwater unicellular microalga Haematococcus pluvialis (H. pluvialis) has gained increasing attention because of its high-value metabolite astaxanthin, a super anti-oxidant. For the maximum astaxanthin production, a key problem is how to determine the senescent green vegetative phase of H. pluvialis cells to apply the astaxanthin production inducers. The conventional methods are time-consuming and laborious. In this study, a novel platform based on organic electrochemical transistor (OECT) was produced. A significant channel current change of OECTs caused by settled H. pluvialis cells on the poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT: PSS) film was recorded commencing from 75 min and a stationary stage was achieved at 120 min after the combined treatment of blue light irradiation and sodium bicarbonate solution additives, which indicate the onset and maturation of the senescent green vegetative phase, respectively. Therefore, the appropriate time point (120 min after sample loading) to apply astaxanthin production inducers was determined by as-fabricated OECTs. This work may assist to develop a real-time biosensor to indicate the appropriate time to apply inducers for a maximum astaxanthin production of H. pluvialis cells.

Multichannel quartz crystal microbalance array: Fabrication, evaluation, application in biomarker detection.

A multichannel quartz crystal microbalance array (MQCM) with three pairs of gold electrodes was fabricated for detection of two biomarkers: acetone and nitric oxide (NO). The gold electrodes were deposited symmetrically on an AT-cut 10 MHz circular quartz plate using photolithography, sputtering, and lift-off technologies. The effect of gold layer thickness on MQCM performance was investigated and the optimized thickness was 101 nm. The simulation values of the electric parameters C0, Cq, Lq, and Rq in the Butterworth-Van Dike equivalent circuit for the MQCM device were 97 pF, 1.3 pF, 1.05 mH, and 9.8 Ω, respectively. Simulation values were in the theoretical range, which indicated that the fabricated MQCM device had good resonance performance. Two types of nanocomposites, titanium dioxide-multiwalled carbon nanotubes and cobalt (II)phthalocyanine-silica, were synthesized as sensing materials. The sensing mechanism is based on coordination adsorption of target molecules onto the sensing material, resulting in a resonant frequency shift of modified QCM sensor. A linear range from 4.33 to 129.75 ppmv for acetone was obtained and one from 5.75 to 103.45 ppbv for NO.

Integration of a miniature quartz crystal microbalance with a microfluidic chip for amyloid beta-Aß42 quantitation.

A miniature quartz crystal microbalance (mQCM) was integrated with a polydimethylsiloxane (PDMS) microfluidic device for on-chip determination of amyloid polypeptide-Aß42. The integration techniques included photolithography and plasma coupling. Aß42 antibody was immobilized on the mQCM surface using a cross-linker method, and the resonance frequency of mQCM shifted negatively due to antibody-antigen binding. A linear range from 0.1 µM to 3.2 µM was achieved. By using matrix elimination buffer, i.e., matrix phosphate buffer containing 500 µg/mL dextran and 0.5% Tween 20, Aß42 could be successfully detected in the presence of 75% human serum. Additionally, high temperature treatments at 150 °C provided a valid method to recover mQCM, and PDMS-mQCM microfluidic device could be reused to some extent. Since the detectable Aß42 concentration could be as low as 0.1 µM, which is close to cut-off value for Alzheimer patients, the PDMS-mQCM device could be applied in early Alzheimer's disease diagnosis.

Bifunctional Square-Planar NiO4 Coordination of Topotactic LaNiO2.0 Films for Efficient Oxygen Evolution Reaction.

The high-efficient and low-cost oxygen evolution reaction (OER) is decisive for applications of oxide catalysts in metal-air batteries, electrolytic cells, and energy-storage technologies. Delicate regulations of active surface and catalytic reaction pathway of oxide materials principally determine thermodynamic energy barrier and kinetic rate during catalytic reactions, and thus have crucial impacts on OER performance. Herein, a synergistic modulation of catalytically active surface and reaction pathway through facile topotactic transformations switching from perovskite (PV) LaNiO3.0 film to infinite-layer (IL) LaNiO2.0 film is demonstrated, which absolutely contributes to improving OER performance. The square-planar NiO4 coordination of IL-LaNiO2.0 brings about more electrochemically active metal (Ni+ ) sites on the film surface. Meanwhile, the oxygen-deficient driven PV- IL topotactic transformations lead to a reaction pathway converted from absorbate evolution mechanism to lattice-oxygen-mediated mechanism (LOM). The non-concerted proton-electron transfer of LOM pathway, evidenced by the pH-dependent OER kinetics, further boosts the OER activity of IL-LaNiO2.0 films. These findings will advance the in-depth understanding of catalytic mechanisms and open new possibilities for developing highly active perovskite-derived oxide catalysts.

A Photoelectrochemical Retinomorphic Synapse.

Reproducing human visual functions with artificial devices is a long-standing goal of the neuromorphic domain. However, emulating the chemical language communication of the visual system in fluids remains a grand challenge. Here, a "multi-color" hydrogel-based photoelectrochemical retinomorphic synapse is reported with unique chemical-ionic-electrical signaling in an aqueous electrolyte that enables, e.g., color perception and biomolecule-mediated synaptic plasticity. Based on the specific enzyme-catalyzed chromogenic reactions, three multifunctional colored hydrogels are developed, which can not only synergize with the Bi2S3 photogate to recognize the primary colors but also synergize with a given polymeric channel to promote the long-term memory of the system. A synaptic array is further constructed for sensing color images and biomolecule-coded information communication. Taking advantage of the versatile biochemistry, the biochemical-driven reversible photoelectric response of the cone cell is further mimicked. This work introduces rich chemical designs into retinomorphic devices, providing a perspective for replicating the human visual system in fluids.

Ascorbic acid-mediated organic photoelectrochemical transistor sensing strategy for highly sensitive detection of heart-type fatty acid binding protein.

Heart-type fatty acid binding protein (H-FABP) has been regarded as a promising biomarker for early diagnosis of acute myocardial infarction (AMI). Developing fast and reliable method for H-FABP detection is still highly desirable but challenging. Herein, an ascorbic acid (AA)-mediated organic photoelectrochemical transistor (OPECT) sensing strategy was reported for the detection of H-FABP in phosphate buffer saline (PBS) solution and human serum. A primary antibody/H-FABP/secondary antibody-Au NPs-alkaline phosphatase (ALP) sandwich immunorecognition structure was constructed. The modified ALP could catalytically convert ascorbic acid-2-phosphate to AA, which was then analyzed by OPECT. As a result, the AA-mediated OPECT sensing strategy realized highly sensitive detection of H-FABP with a detection limit of 3.23 × 10-14 g/mL which is two orders of magnitude lower than that of PEC method. Under optimal experimental conditions, H-FABP concentration could be obtained in ∼90 min. Importantly, the analysis of H-FABP was resistant to the interference from immunoglobulin G, bovine serum albumin, cysteine, AA and human serum. The proposed AA-mediated OPECT sensing strategy provides a simple, fast, and accurate way for H-FABP detection in AMI suspected patients.

Facile synthesis of hierarchical MoS2/ZnS @ porous hollow carbon nanofibers for a stable Li metal anode.

Lithium metal is considered as an ideal anode candidate for next generation Li battery systems since its high capacity, low density, and low working potential. However, the uncontrollable growth of Li dendrites and infinite volume expansion impede the commercialized applications of Li-metal anodes. In this work, we rationally designed and constructed a hierarchical porous hollow carbon nanofiber decorated with diverse metal sulfides (MS-ZS@PHC). This composite scaffold has three advantages: First, the synergistic effect of multiple-size lithiophilic phases (nano ZnS and micro MoS2) can regulate Li ions nuclei and grow up homogenously on the scaffold. Second, the enlarged interplanar spacing of MoS2 microsphere on the fibers can provide abundant channels for Li ions transportation. Third, the porous scaffold can confine the volume expansion of Li metal anode during cycling. Therefore, in a symmetrical cell, the MS-ZS@PHC host presents a homogenous Li plating/stripping behavior and runs steadily for 1100 h at 5 mA cm-2 with a capacity of 5 mAh cm-2 and even for 700 h at 10 mA cm-2 with a capacity of 1 mAh cm-2. A full cell using MS-ZS@PHC /Li composite as anode and coupled with LiFePO4 as cathode delivers an excellent cyclic and rate performances.

A Highly Strained Phase in PbZr0.2Ti0.8O3 Films with Enhanced Ferroelectric Properties.

Although epitaxial strain imparted by lattice mismatch between a film and the underlying substrate has led to distinct structures and emergent functionalities, the discrete lattice parameters of limited substrates, combined with strain relaxations driven by film thickness, result in severe obstructions to subtly regulate electro-elastic coupling properties in perovskite ferroelectric films. Here a practical and universal method to achieve highly strained phases with large tetragonal distortions in Pb-based ferroelectric films through synergetic effects of moderately (≈1.0%) misfit strains and laser fluences during pulsed laser deposition process is demonstrated. The phase possesses unexpectedly large Poisson's ratio and negative thermal expansion, and concomitant enhancements of spontaneous polarization (≈100 µC cm-2) and Curie temperature (≈800 °C), 40% and 75% larger than that of bulk counterparts, respectively. This strategy efficiently circumvents the long-standing issue of limited numbers of discrete substrates and enables continuous regulations of exploitable lattice states in functional oxide films with tightly elastic coupled performances beyond their present levels.

Robust, Reprocessable, and Reconfigurable Cellulose-Based Multiple Shape Memory Polymer Enabled by Dynamic Metal-Ligand Bonds.

Smart materials with multiple shape memory capacities have gradually attracted the interest of a lot of researchers due to their potential application in textiles, smart actuators, and aerospace engineering. However, the design and sustainable synthesis of multiple shape memory polymers (SMPs) simultaneously possessing robust mechanical strength, reprocessability, and reconfigurability still remain full of challenges. Starting from a readily available biomass material cellulose, a well-defined SMP, cellulose-graft-poly(n-butyl acrylate-co-1-vinylimidazole) copolymer (Cell-g-(BA-co-VI)) was facilely synthesized by addition-fragmentation chain transfer polymerization (RAFT) and the subsequent metallosupramolecular cross-linking. Taking advantage of the dynamic bonding, i.e., the rapid reversible fragmentation and the formation of metal ion-imidazole coordination, polymer networks with highly tunable mechanical properties, excellent solid-state plasticity, and quadruple-shape memory capacity are handily attainable. Microscopically, the metal-ligand clusters have a strong tendency to phase segregate from the soft grafted copolymers indicated by atomic force microscopy (AFM), and these serve as netpoints to construct novel SMPs. This article represents our new exploration of the next-generation SMPs based on cellulose backbone where carrying with supramolecular cross-linked soft grafted copolymers. This architecture design allows achieving robust, reprocessable, and reconfigurable thermoplastic SMPs that are difficult to realize by many other methods. Integrating these properties into one system in a synergetic manner also provides a novel approach to the high value addition application of cellulose in the fabrication of advanced functional materials.

Polyvinyl Alcohol/Graphene Oxide Interlayer for Enhancing Adhesive Performance of HA Coating on C/C Composites Prepared by Hydrothermal Electrodeposition/Hydrothermal Treatment.

Hydroxyapatite (HA) coatings directly deposited by hydrothermal electrochemical technology (HET) onto carbon/carbon (C/C) composites exhibited a catastrophic failure occurring at the interface of the HA and C/C. To overcome this problem, a polyvinyl alcohol (PVA)/graphene oxide (GO) interlayer (P/G interlayer) was applied on the (NH4)2S2O8-pretreated C/C substrate (named P/G-C/C) by using a dipping method. Subsequently, a calcium phosphate coating was deposited on P/G-C/C, shortened as M-P/G-C/C, by HET, and then converted into HA coating (abbreviated as HA-P/G-C/C) through posthydrothermal treatment. For comparison, HA coating was prepared onto C/C without a P/G interlayer through the same process, which was denoted as HA-C/C. The composition, microstructure, and morphology of the samples were characterized by X-ray diffractometry (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), Raman spectra, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The adhesive performance of the coatings on C/C was measured by a scratch test. Finally, an in vitro bioactivity of the coatings was evaluated in a simulated body fluid solution at 37 °C. Results showed no apparent differences in the morphology and phase of the posttreated coatings, both of which are composed of a dense structure containing needle-like HA crystals. However, the HA-P/G-C/C sample possessed a higher Ca/P ratio and denser interface, thereby exhibiting higher adhesive performance and better bioactivity. The adhesive strength of the HA-P/G coating was observed at a critical load of 41.04 N, which increased by 29.3% relative to the HA coating. Moreover, the failure site was on the HA-P/G coating rather than at the interface. The enhanced adhesive performance was ascribed to the PVA/GO-repairing pits on C/C and PVA and GO toughening effects on the HA coating. In vitro and in vivo tests revealed no statistical significance for the two HA-coated C/C samples, although the HA-P/G coating exhibited better bioactivity, inducing the growth of bonelike apatite than the HA coating.

Synthesis of Ni@NiSn Composite with High Lithium-Ion Diffusion Coefficient for Fast-Charging Lithium-Ion Batteries.

To solve the problems of fast-charging of lithium-ion batteries in essence, development of new electrode materials with higher lithium-ion diffusion coefficients is the key. In this work, a novel flower-like Ni@SnNi structure is synthesized via a two-step process design, which consists of the fabrication of Ni cores by spray pyrolysis followed by the formation of SnNi shells via a simple oxidation-reduction reaction. The obtained Ni@SnNi composite exhibits an initial capacity of ≈693 mA h g-1 and a reversible capacity of ≈570 mA h g-1 after 300 charge/discharge cycles at 0.5 C, and maintains 450 mA h g-1 even at a high rate of 3 C. Further, it is proved that a Ni@SnNi composite possesses high lithium-ion diffusion coefficient (≈10-8), which is much higher than those (≈10-10) reported previously, which can be mainly attributed to the unique flower-like Ni@SnNi structure. In addition, the full cell performance (Ni@SnNi-9h/graphite vs LiCoO2) with a capacity ratio of 1.13 (anode/cathode) is also tested. It is found that even at 2 C rate charging/discharging, the capacity retention at 100 cycles is still close to 89%. It means that Ni@SnNi-9h is a promising anode additive for lithium-ion batteries with high energy density and power density.

Defect-rich honeycomb-like nickel cobalt sulfides on graphene through rapid microwave-induced synthesis for ultrahigh rate supercapacitors.

Nickel cobalt sulfides (NCS) are regarded as potential energy storage materials due to the versatile valent states and rich electrochemical activity, but their sluggish synthesis process and inferior rate performance hinder them from large-scale application. Herein, microwave-induced strategy has been employed for efficient synthesis of honeycomb-like NCS/graphene composites, which are explored as ultrahigh rate battery-type electrodes for supercapacitors. Due to the internal heat mechanism, the synthesis time of NCS by microwave could be shortened from hours to minutes. Density functional theory was simulated to uncover the interfacial effect between NCS and graphene, and the resulted Schottky barrier is in favor of enhancing redox activity and capacity. Ultimately, the obtained defect-rich nickel cobalt sulfides/graphene with thermal treatment (NCS/G-H) could exhibit a high specific capacitance of 1186 F g-1 at 1 A g-1 and sustain 89.8% capacity even after the increase of current density over 20 times, which is much superior to bare NCS and NCS/graphene. Furthermore, the assembled NCS/G-H hybrid supercapacitor delivers supreme energy density of 46.4 Wh kg-1, and retains outstanding long-term stability of 89.2% after 10 k cycles. These results indicate that the synthesized NCS/G-H by time-saving microwave-induced liquid process could be served as high rate materials for supercapacitors.

Antibacterial and antioxidant activity of exopolysaccharide mediated silver nanoparticle synthesized by Lactobacillus brevis isolated from Chinese koumiss.

Recently, silver nanoparticles gain significant attention due to their applications in various fields. The aim of present study was to develop the eco-friendly, cost effective, and simple method to biosynthesized the silver nanoparticle using sliver nitrate as precursor. In this study, we investigated the physical characterization and biotechnological applications of biosynthesized silver nanoparticle using exopolysaccharide of probiotic Lactobacillus brevis MSR104 isolated from Chinese koumiss. Biosynthesized silver nanoparticles were characterized using the fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, and elemental analyzer. The achieved results indicate that silver nanoparticles varied in sized with an average size of 45 nm. The X-ray diffraction analysis results showed that the silver nanoparticles have a crystalline nature. The results of antimicrobial assay indicated that the silver nanoparticles exhibited outstanding antimicrobial activity in dose dependent manner against both Gram's negative as well as Gram's positive. The antioxidant results indicate that the silver nanoparticles showed excellent scavenging rate against DPPH free radicals (81.4 ±â€¯1.2%) and nitric oxide free radicals (75.06 ±â€¯0.4%). Furthermore, the results of MTT assay revealed that the AgNPs significantly reduced the percentage of live HT-29 cells at higher concentration. This study concluded that the newly synthesized silver nanoparticles have antibacterial, antioxidant, and anticancer applications in agricultural and food industries.

A Novel Bi2MoO6/ZIF-8 Composite for Enhanced Visible Light Photocatalytic Activity.

A series of novel Bi2MoO6/zeolitic imidazolate framework-8 (ZIF-8) photocatalysts have been successfully fabricated through a facile self-assembly process. X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectrophotometry, and X-ray photoelectron spectroscopy (XPS) characterized pure Bi2MoO6, pure ZIF-8, and a series of Bi2MoO6/ZIF-8 composites. The result indicated that, when compared with pure Bi2MoO6, the composite of Bi2MoO6/ZIF-8 exhibited excellent photocatalytic performance for the degradation of methylene blue (MB) under visible light. Moreover, the Bi2MoO6/ZIF-8-3 composite (the molar ratio of Bi2MoO6 to 2-MI is 3:3) has optimum photocatalytic performance because of the suitable amount of ZIF-8 decorated on the flower-like Bi2MoO6. The enhanced photocatalytic activity is probably due to the introduction of ZIF-8, which will promote the separation of electron-hole pair and the surface morphology. Benefitting from the diversity of the MOF species (ZIF-8 is one of them), this composing strategy of Bi2MoO6/MOF composite would provide new insight into the design of highly efficient visible light photocatalysts.