RESUMEN
The slow reaction kinetics and severe shuttle effect of lithium polysulfide make Li-S battery electrochemical performance difficult to meet the demands of large electronic devices such as electric vehicles. Based on this, an electrocatalyst constructed by metal phase material (MoS2) and semiconductor phase material (SnS2) with ohmic contact is designed for inhibiting the dissolution of lithium polysulfide with improving the reaction kinetics. According to the density-functional theory calculations, it is found that the heterostructured samples with ohmic contacts can effectively reduce the reaction-free energy of lithium polysulfide to accelerate the sulfur redox reaction, in addition to the excellent electron conduction to reduce the overall activation energy. The metallic sulfide can add more sulfophilic sites to promote the capture of polysulfide. Thanks to the ohmic contact design, the carbon nanotube-MoS2-SnS2 achieved a specific capacity of 1437.2 mAh g-1 at 0.1 C current density and 805.5 mAh g-1 after 500 cycles at 1 C current density and is also tested as a pouch cell, which proves to be valuable for practical applications. This work provides a new idea for designing an advanced and efficient polysulfide catalyst based on ohmic contact.
RESUMEN
Phosphate-based electrolyte propels the advanced battery system with high safety. Unfortunately, restricted by poor electrochemical stability, it is difficult to be compatible with advanced lithium metal anodes and Ni-rich cathodes. To alleviate these issues, the study has developed a phosphate-based localized high-concentration electrolyte with a nitrate-driven solvation structure, and the nitrate-derived N-rich inorganic interface shows excellent performance in stabilizing the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode interface and modulating the lithium deposition morphology on the anode. The results show that the Li|| NCM811 cell has exceptional long-cycle stability of >80% capacity retention after 800 cycles at 4.3 V, 1 C. A more prominent capacity retention rate of 93.3% after 200 cycles can be reached with the high voltage of 4.5 V. While being compatible with the phosphate-based electrolyte with good flame retardancy and the good electrochemical stability of Ni-rich lithium metal battery (LMBs) systems, the present work expands the construction of anion-rich solvation structures, which is expected to promote the development of the high-performance LMBs with safety.
RESUMEN
The localized high-concentration electrolyte (LHCE) propels the advanced high-voltage battery system. Sulfone-based LHCE is a transformative direction compatible with high energy density and high safety. In this work, the application of lithium bis(trifluoromethanesulphonyl)imide and lithium bis(fluorosulfonyl)imide (LiFSI) in the LHCE system constructed from sulfolane and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) is investigated. The addition of diluent causes an increase of contact ion pairs and ionic aggregates in the solvation cluster and an acceptable quantity of free solvent molecules. A small amount of LiFSI as an additive can synergistically decompose with TTE on the cathode and participate in the construction of both electrode interfaces. The designed electrolyte helps the Ni-rich system to cycle firmly at a high voltage of 4.5 V. Even with high mass load and lean electrolyte, it can keep a reversible specific capacity of 91.5% after 50 cycles. The constructed sulfone-based electrolyte system exhibits excellent thermal stability far beyond the commercial electrolytes. Further exploration of in-situ gelation has led to a quick conversion of the designed liquid electrolyte to the gel state, accompanied by preserved stability, which provides a direction for the synergistic development of LHCE with gel electrolytes.
RESUMEN
BACKGROUND: Neurofibromatosis type 1 (NF 1) is an autosomal-dominant tumor predisposition genetic disease affecting approximately 1 in 3000 live births. The condition could present various manifestations ranging from skin abnormalities to neurological tumors. The musculoskeletal system could also be frequently affected, and scoliosis is the most common orthopedic manifestation. Characterized by the early-onset and rapid progression tendency, NF 1-related dystrophic scoliosis presented discrepancies from idiopathic scoliosis in terms of natural history, clinical features, and management outcomes and thus required special attention. In the current study, the authors conducted a systemic review to outline the body of evidence of the natural history, clinical characteristics, surgical outcomes, and surgical complications of NF 1-induced scoliosis, aiming to provide an elucidative insight into this condition. METHOD: Systemic review and meta-analysis were conducted according to the latest Preferred Reporting Items for Systematic Reviews Meta-Analyses (PRISMA) guidelines. The search was performed in Medline, Embase, and Web of Science Core Collection up to December 27, 2022, using related keywords. Clinical features such as frequencies, segmental involvement, and hereditary information were summarized and described qualitatively. Meta-analysis was conducted using R software and the 'meta' package to yield an overall outcome of efficacy and safety of surgical management, precisely, spinal fusion procedure and growing rods procedure. Corrective rate of Cobb angle, sagittal kyphosis angle, and T1-S1 length post-operative and at the last follow-up was used to evaluate the efficacy, and the occurrence of surgery-related complications was used to evaluate the safety. RESULT: A total of 37 articles involving 1023 patients were included. Approximately 26.6% of the NF 1 patients would present with scoliosis. Patients tend to develop scoliosis at an earlier age. The thoracic part turned out to be the most affected segment. No obvious correlation between scoliosis and genotype or hereditary type was observed. Both spinal fusion and growing rod surgery have shown acceptable treatment outcomes, with spinal fusion demonstrating better performance in terms of effectiveness and safety. The growing rods technique seemed to allow a better lengthening of the spine. The mainstay post-operative complications were implant-related complications but could be managed with limited revision surgery. Severe neurological deficits were rarely reported. CONCLUSION: Scoliosis, especially the subtype characterized by dystrophic bony changes, is a significant orthopedic manifestation of NF1. It has an early onset, a tendency to persistently and rapidly progress, and is challenging to deal with. The current review outlines the available evidence from the perspective of natural history, clinical features, and the treatment efficacy and safety of the mainstay surgical options. Patients with NF1 scoliosis will benefit from a better understanding of the disease and evidence based treatment strategies.
Asunto(s)
Neurofibromatosis 1 , Escoliosis , Humanos , Escoliosis/cirugía , Escoliosis/etiología , Neurofibromatosis 1/cirugía , Neurofibromatosis 1/complicaciones , Fusión Vertebral/métodos , Resultado del TratamientoRESUMEN
Transition-metal sulfide is considered to be an admirable transformational electrode material due to low cost, large specific capacity, and good reversibility in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Herein, the reduced graphene oxide-wrapped open bimetallic sulfide (NiS2-Co3S4@rGO) nanocage, derived from nickel-cobalt Prussian blue, was obtained by two-step calcination. There are luxuriant pore structures in the nanocage composite with a specific surface area of 85.28 m2 g-1, which provides plentiful paths for rapid transmission of Li+/Na+ and alleviates the volume stress caused by insertion and extraction of alkali metal ions. The excellent interface combination of bimetallic sulfide wrapped in reduced graphene oxide improves the conductivity and overall performance of the battery. Thanks to the special interface engineering, the open NiS2-Co3S4@rGO nanocage composite displays rapid lithium storage properties with an average diffusion coefficient of 8.5 × 10-13 cm2 s-1. Moreover, after 300 cycles, the reversible capacity of the composite is 1113.2 mAh g-1 at 1 A g-1. In SIBs, the capacity of the open NiS2-Co3S4@rGO composite is 487.9 mAh g-1 when the current density is 5 A g-1. These preeminent performances demonstrate the enormous development prospects of bimetallic sulfide nanocage as anode material in LIBs and SIBs.