Advancing H-Bonding Organocatalysis for Ring-Opening Polymerization: Intramolecular Activation of Initiator/Chain End.

Organocatalytic ring-opening polymerization (ROP) of lactones is a green method for accessing renewable and biodegradable polyesters. Developing new organocatalysts with high activity and controllability is a major and challenging research topic in this field. Here, we report a series of organocatalysts to achieve a fast and controlled ROP of lactones. These catalysts incorporate (thio)urea and alkoxide in one molecule and act as initiators in the ROP. Such catalysts enable an effective intramolecular activation of initiator/chain end, as revealed by computational studies, resulting in higher activity and fewer (thio)urea loads than existing (thio)urea/alkoxide binary systems. These organocatalysts exhibit ultrahigh activity comparable to metal complexes, i.e., turnover number up to 900 and turnover of frequency up to 4860 min-1, affording polyesters with tailor-made structure, predicted molecular weights, narrow dispersity, less epimerization, and minimal transesterification. The catalyst synthesis is simple and scalable, allowing widely tuned activities of the ROP.

Phosphine-Capped Effects Enable Full-Color Clusteroluminescence in Nonconjugated Polyesters.

Full-color luminophores have advanced applications in materials and engineering, but constructing color-tunable clusteroluminescence (CL) from nonconjugated polymers based on through-space interactions remains a huge challenge. Herein, we develop phosphine-capped nonconjugated polyesters exhibiting blue-to-red CL (400-700 nm) based on phosphine-initiated copolymerization of epoxides and cyclic anhydrides, especially P1-0.5TPP, which exhibits red CL (610 nm) with a high quantum yield of 32%. Experiments and theoretical calculations disclose that the phosphine-capped effect in polyesters brings about conformational changes and induces phosphine-ester clusters by through-space (n,π*) interactions. Moreover, CL colors and efficiencies can be easily tailored by types of phosphines, compositions and structures of polyesters, and concentration. Significantly, the role of polymer motions (group, segmental, and chain motions) on CL originating from microregions inside polyesters is revealed. Further, phosphine-capped nonconjugated polyesters are demonstrated to be nonconjugated dyes and fluorescent fibers and are also used for multicolor light-emitting diodes including white light. This work not only provides an engineering strategy based on the end-group effect to prepare full-color clusteroluminogens but also broadens the prospects for material applications.

O/S Exchange Reaction in Synthesizing Sulfur-Containing Polymers.

Using carbon disulfide (CS2) and carbonyl sulfide (COS) as sulfur-containing and one-carbon feedstocks to make value-added products is paramount for both pure and applied chemistry and environmental science. One of the practical strategies is to copolymerize these bulk chemicals with epoxides to produce sulfur-containing polymers. This approach contributes to improving the sustainability of polymer manufacturing, provides highly desired functional polymer materials, and has attracted much attention. However, these copolymerizations invariably exhibit the intensely complicated chemistry of O/S exchange reaction, leading to sulfur-containing polymers with diverse architectures. As the understanding of O/S exchange continues to deepen, recent efforts have guided significant advances in the synthesis of CS2- and COS-based polymers. This review examines the O/S exchange chemistry and summarizes the recent progress in this field to promote the further advance of synthesizing sulfur-containing polymers from CS2 and COS.

Sustainable Polymers with High Performance and Infinite Scalability.

Our society has been pursuing high-performance biodegradable polymers made from facile methods and readily available monomers. Here, we demonstrate a library of enzyme-degradable polymers with desirable properties from the first reported step polyaddition of diamines, COS, and diacrylates. The polymers contain in-chain ester and thiourethane groups, which can serve as lipase-degradation and hydrogen-bonding physical crosslinking points, respectively, resulting in possible biodegradability as well as upgraded mechanical and thermal properties. Also, the properties of the polymers are scalable due to the versatile method and the wide variety of monomers. We obtain 46 polymers with tunable performance covering high-Tm crystalline plastics, thermoplastic elastomers, and amorphous plastics by regulating polymer structure. Additionally, the polymerization method is highly efficient, atom-economical, quantitatively yield, metal- and even catalyst-free. Overall, the polymers are promising green materials given their degradability, simple and modular synthesis, remarkable and tunable properties, and readily available monomers.

Water-Degradable Oxygen-Rich Polymers with AB/ABB Units from Fast and Selective Copolymerization.

Researchers have been chasing plastics that can automatically and fully degrade into valuable products under natural conditions. Here, we develop a series of water-degradable polymers from the first reported fast and selective cationic copolymerization of formaldehyde (B) with cyclic anhydrides (A). In addition to readily accessible monomers, the method is performed at industrially relevant temperatures (~100 °C), takes tens or even minutes, and uses common acid as the catalyst. Interestingly, such polymers possess tunable AB/ABB-type repeating units, which are considered to be thermodynamic and kinetic products, respectively, resulting in low carbon content ([O] : [C] up to 1 : 1). Notably, the polymers can completely degrade to valuable diacids within 150 days in water at ambient temperature owing to the incorporation of carboxyl terminals and acid-responsive acetal units. By washing with aqueous sodium carbonate, the polymers are relatively stable over several months.

Near-Infrared Emission Beyond 900†nm from Stable Radicals in Nonconjugated Poly(diphenylmethane).

Organic radicals with narrow energy gaps are highly sought-after for the production of near-infrared (NIR) fluorophores. However, the current repertoire of developed organic radicals is notably limited, facing challenges related to stability and low fluorescence efficiency. This study addresses these limitations by achieving stable radicals in nonconjugated poly(diphenylmethane) (PDPM). Notably, PDPM exhibits a well-balanced structural flexibility and rigidity, resulting in a robust intra-/inter-chain through-space conjugation (TSC). The stable radicals within PDPM, coupled with strong TSC, yield a remarkable full-spectrum emission spanning from blue to NIR beyond 900 nm. This extensive tunability is achieved through careful adjustments of concentration and excitation wavelength. The findings highlight the efficacy of polymerization in stabilizing radicals and introduce a novel approach for developing nonconjugated NIR emitters based on triphenylmethane subunits.

Modular Alcohol Click Chemistry Enables Facile Synthesis of Recyclable Polymers with Tunable Structure.

The facile synthesis of chemically recyclable polymers derived from sustainable feedstocks presents enormous challenges. Here, we develop a novel, modular, and efficient click reaction for connecting primary, secondary, or tertiary alcohols with activated alkenes via a bridge molecule of carbonyl sulfide (COS). The click reaction is successfully applied to synthesize a series of recyclable polymers by the step polyaddition of diols, diacrylates, and COS. Diols and diacrylates are common chemicals and can be produced from biorenewable sources, and COS is released as the industrial waste. In addition to sustainable monomers, the approach is atom-economical, wide in scope, metal-free, and performed under mild conditions, affording unprecedented polymers with nearly quantitative yields. The produced polymers also possess predesigned and widely tunable structure owing to the versatility of our method and the broad variety of monomers. The in-chain thiocarbonate and ester polar groups can play as breakpoints, allowing these polymers to be easily recycled. Overall, the polymers have broad prospects for green materials given their facile synthesis, readily available feedstocks, desirable performance, and chemical recyclability.

Chemically Recyclable Polyethylene-like Sulfur-Containing Plastics from Sustainable Feedstocks.

The green revolution in plastics should be accelerated due to growing sustainability concerns. Here, we develop a series of chemically recyclable polymers from the first reported cascade polymerization of H2 O, COS, and diacrylates. In addition to abundant feedstocks, the method is efficient and air-tolerant, uses common organic bases as catalysts, and yields polymers with high molecular weights under mild conditions. Such polymers, structurally like polyethylene with low-density in-chain polar groups, manifest impressive toughness and ductility comparable to high-density polyethylene. The in-chain ester group acts as a breaking point, enabling these polymers to undergo chemical recycling through two loops. The structures and properties of these polymers also have an immeasurably expanded range owing to the versatility of our method. The readily available raw materials, facile synthesis, and high performance make these polymers promising prospects as sustainable materials in practice.

NIR Clusteroluminescence of Non-conjugated Phenolic Resins Enabled by Through-Space Interactions.

Clusteroluminescence (CL) and through-space interactions (TSIs) of non-conjugated molecules have drawn more attention due to their unique photophysical behaviors that are different from largely conjugated luminogens. However, achieving red and even near-infrared (NIR) emission from such systems is still challenging due to the intrinsic drawbacks of non-conjugated molecules and the lack of theories for structure-property relationships. In this work, six phenolic resins are designed and synthesized based on two molecule-engineering strategies: increasing the number of TSIs units and introducing electron-donating/-withdrawing groups. All phenolic resins are verified as luminogens with CL property (CLgens), and the first example of CLgens with NIR emission (maximum emission wavelength ≥680 nm) and high absolute quantum yield (47 %) is reported. Experiments and theoretical analysis reveal that two TSIs types, through-space locally excited state and through-space charge transfer state, play essential roles in achieving CL from these non-conjugated polymers, which could be manipulated via changing structural conformation and electron density or altering electron transition behaviors. This work not only provides an approach to manipulate TSIs and CL of non-conjugated polymers but also endows commercially available phenolic resins with high practical value as luminescence materials.

Aliphatic Polyesters with White-Light Clusteroluminescence.

Single-molecule white-light emission (SMWLE) has many advantages in practical applications; however, the fabrication of SMWLE from nonconjugated luminescent polymers, namely, clusteroluminogens (CLgens), is still a big challenge. Herein, the first example of linear nonconjugated polyesters with SMWLE is reported. Twenty-four kinds of nonconjugated aliphatic polyesters with tunable clusteroluminescence (CL) colors and efficiency were synthesized by the copolymerization of six epoxides and four anhydrides. Experimental and calculation results prove that, at the primary structure level, the balance of structural flexibility and rigidity via adjusting the side-chain length significantly enhances the efficiency of CL without wavelength change. However, altering the chemical structures of the monomer from succinic anhydride to trans-maleic anhydride (MA), cis-MA, and citraconic anhydride (CA), secondary structures of these polyesters change from helix to straight and folding sheet accompanied by gradually red-shifted CL from 460 to 570 nm due to the increase in through-space n-π* interactions, as demonstrated by the computational and experimental results. Then, pure SMWLE with CIE coordination (0.30, 0.32) based on overlapped short-wavelength and long-wavelength CL is achieved in CA-based polyesters. This work not only provides further insights into the emission mechanism of CL but also provides a new strategy to manipulate the properties of CL by regulating the hierarchical structures of CLgens.

A Facile and Unprecedented Route to a Library of Thermostable Formaldehyde-Derived Polyesters: Highly Active and Selective Copolymerization of Cyclic Acetals and Anhydrides.

The development of new strategies for producing polyesters can expand the category of biodegradable materials. Here, we disclose the alternating copolymerization of cyclic acetals (made from formaldehyde and diols) and anhydrides for the first time, using 5 cyclic acetals and 9 anhydrides to afford 45 unprecedented polyesters. At a wide range of reaction temperatures (25 to 140 °C), diverse metal-free Lewis/Brønsted acids are highly active catalysts for these copolymerizations via the cationic mechanism. Of interest, kinetic studies indicate that the copolymerization of cyclic acetals and anhydrides shifts the chemical equilibrium of "cyclic acetals ⇌ polyacetals" to the left, thus yielding polyesters with up to >99 % alternating degree. The obtained polyesters possess high oxygen content ([O] : [C] up to 6 : 7), molecular weights of 2.0-33.3 kDa, narrow polydispersities of 1.2-1.5, low glass transition temperatures (-64 to -27 °C), as well as high decomposition temperatures (275 to 324 °C).

Altering Chain Flexibility of Aliphatic Polyesters for Yellow-Green Clusteroluminescence in 38 % Quantum Yield.

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 µM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester.

Enabling Oxygen-Sulfur Exchange Reaction to Produce Semicrystalline Copolymers from Carbon Disulfide and Ethylene Oxide.

This work describes the first example of semicrystalline poly(thiocarbonate)s from carbon disulfide (CS2 ) and ethylene oxide (EO), two mass producible low-cost monomers. Lewis acid/base pairs (LPs) exhibit high activity (EO conversion up to >99%, 8 h) in catalyzing the copolymerization under low Lewis pair/monomer ratio of 1:1500. Oxygen-sulfur exchange reaction (O-S ER) during the copolymerization of CS2 and EO, the generation and mutual copolymerization with COS, CO2 , and episulfide, is harnessed to introduce crystallizable segments [SC(O)O and SC(S)S] in the copolymer. The type of Lewis base is found to have a great impact on the chain microstructure and the crystalline properties. The formed copolymers with melting point from 117.7 to 245.3 °C are obtained. The maximum crystallinity is estimated to be 78% based on the powder wide-angle X-ray diffraction pattern. This work provides a general method to prepare semicrystalline sulfur-containing polymers.

Poly(thioether)s from Closed-System One-Pot Reaction of Carbonyl Sulfide and Epoxides by Organic Bases.

The synthesis of poly(thioether), a highly desired sulfur-containing polymer, is still a key challenge. Herein, we report a simple and facile approach to poly(thioether)s by closed-system one-pot reaction of carbonyl sulfide (COS) and epoxides. This route underwent the coupling reaction of COS with epoxides, followed by decarboxylative ring-opening polymerization (ROP) of the generated mixed cyclic thiocarbonates with releasing of CO2 and a little bit of COS. Organic base was used as catalyst and initiator in the two steps, respectively. The oxygen/sulfur exchange reaction was driven by successive regioselective elementary reactions and spontaneous releasing of CO2 (COS), leading to the sulfur atom of COS transferring to poly(thioether)s, which was well demonstrated by DFT studies. This work provides an easy-to-handle, metal-free route to poly(thioether)s bearing diverse structures by using readily available chemicals.

Highly Efficient One-Pot Synthesis of COS-Based Block Copolymers by Using Organic Lewis Pairs.

A one-pot synthesis of block copolymer with regioregular poly(monothiocarbonate) block is described via metal-free catalysis. Lewis bases such as guanidine, quaternary onium salts, and Lewis acid triethyl borane (TEB) were equivalently combined and used as the catalysts. By using polyethylene glycol (PEG) as the macromolecular chain transfer agent (CTA), narrow polydispersity block copolymers were obtained from the copolymerization of carbonyl sulfide (COS) and propylene oxide (PO). The block copolymers had a poly(monothiocarbonate) block with perfect alternating degree and regioregularity. Unexpectedly, the addition of CTA to COS/PO copolymerization system could dramatically improve the turnover frequency (TOF) of PO (up to 240 h-1), higher than that of the copolymerization without CTA. In addition, the conversion of CTA could be up to 100% in most cases, as revealed by ¹H NMR spectra. Of consequence, the number-average molecular weights (Mns) of the resultant block copolymers could be regulated by varying the feed ratio of CTA to PO. Oxygen-sulfur exchange reaction (O/S ER), which can generate randomly distributed thiocarbonate and carbonate units, was effectively suppressed in all of the cases in the presence of CTA, even at 80 °C. This work presents a versatile method for synthesizing sulfur-containing block copolymers through a metal-free route, providing an array of new block copolymers.

On the long time simulation of reaction-diffusion equations with delay.

For a consistent numerical method to be practically useful, it is widely accepted that it must preserve the asymptotic stability of the original continuous problem. However, in this study, we show that it may lead to unreliable numerical solutions in long time simulation even if a classical numerical method gives a larger stability region than that of the original continuous problem. Some numerical experiments on the reaction-diffusion equations with delay are presented to confirm our findings. Finally, some open problems on the subject are proposed.

Cyclic Polyesters with Closed-Loop Recyclability from A New Chemically Reversible Alternating Copolymerization.

Polyesters with both cyclic topology and chemical recyclability are attractive. Here, the alternating copolymerization of cyclic anhydride and o-phthalaldehyde to synthesize a series of cyclic and recyclable polyesters are reported for the first time. Besides readily available monomers, the copolymerization is carried out at 25 °C, uses common Lewis/Brønsted acids as catalysts, and achieves high yields within 1 h. The resulting polyesters possess well-defined alternating sequences, high-purity cyclic topology, and tunable structures using distinct two monomer sets. Of interest, the copolymerization manifests obvious chemical reversibility as revealed by kinetic and thermodynamic studies, making the unprecedented polyesters easy to recycle to their distinct two monomers in a closed loop at high temperatures. This work furnishes a facile and efficient method to synthesize cyclic polyesters with closed-loop recyclability.

Excitation wavelength-dependent lanthanide-disalicylaldehyde coordination hybrid capable of distinguishing D2O from H2O.

The increasing demands in fields of anti-counterfeiting, fluorescence analysis, clinical therapy and LED illumination are urgently eager for more excellent optically switchable luminescent materials with the stable and multimodal fluorescence in single-component matrix. Herein, the lanthanide-disalicylaldehyde coordination hybrid H2Qj4/TbxEuy is proposed as an efficient luminescent matrix to connect terbium sensibilization with ESIPT (excited-state intramolecular proton transfer) effects, and three multi-emission hybrids are finally designed and synthesized by regulating Tb3+ and Eu3+ ratios. Surprisingly, the H2Qj4/Tb0.91Eu0.09 shows the excitation wavelength-dependent luminescence in solution which originates from two energy transfer ways of terbium sensibilization effect. It exhibits green and red lights under the 369 and 394 nm UV lamp, respectively. Three hybrids are further used as lab-on-a-molecule fluorescent probes to perform multianalyte detection for various solvents by selected fluorescent sensing channels. By means of PCA (principal component analysis) and HCA (hierarchical cluster analysis), all of them can successfully detect and discriminate17 common solvents, especially the H2O and D2O. Moreover, the H2Qj4/Tb0.91Eu0.09 also shows the wide linear responses of H2O content in D2O, discrimination of two-component solvent mixtures, hygroscopicity evaluation of D2O and information encryption which will advance the progress of multimodal luminescent materials and multianalyte chemosensors.

Enabling nonconjugated polyesters emit full-spectrum fluorescence from blue to near-infrared.

Near-infrared luminophores have many advantages in advanced applications, especially for structures without π-conjugation aromatic rings. However, the fabrication of red clusteroluminogens from nonconjugated polymers is still a big challenge, let alone the near-infrared clusteroluminogens. Here, we develop nonconjugated luminophores with full-spectrum from blue to near-infrared light (470 ~ 780 nm), based on color phenomenon of nonconjugated polyesters synthesized from the amine-initiated copolymerization of epoxides and cyclic anhydrides. We reveal that amines act as initiators attached to polymer chain ends. The formation of various amine-ester complexes in polyesters induces red to near-infrared light, conceptually, amine-ester complexed clusteroluminescence via intra/inter-chain charge transfer. Significantly, emission colors can be easily tuned by the contents and types of amines, microstructures of polyesters, and their concentration. This work provides a low-cost, scalable platform and strategy for the production of high-efficiency, multicolor luminescent materials.

A recyclable polyester library from reversible alternating copolymerization of aldehyde and cyclic anhydride.

Our society is pursuing chemically recyclable polymers to accelerate the green revolution in plastics. Here, we develop a recyclable polyester library from the alternating copolymerization of aldehyde and cyclic anhydride. Although these two monomer sets have little or no thermodynamic driving force for homopolymerization, their copolymerization demonstrates the unexpected alternating characteristics. In addition to readily available monomers, the method is performed under mild conditions, uses common Lewis/Brønsted acids as catalysts, achieves the facile tuning of polyester structure using two distinct monomer sets, and yields 60 polyesters. Interestingly, the copolymerization exhibits the chemical reversibility attributed to its relatively low enthalpy, which makes the resulting polyesters perform closed-loop recycling to monomers at high temperatures. This study provides a modular, efficient, and facile synthesis of recyclable polyesters using sustainable monomers.