Molecularly imprinted fluorescence assay based on lead halide perovskite quantum dots for determination of benzo(a)pyrene.

Molecularly imprinted polymers with methylammonium lead halide perovskite quantum dots (MIP@MAPbBr3 PQDs) have been prepared and applied to the determination of benzo(a)pyrene (BaP) for the first time. The photoluminescence (PL) of MIP@MAPbBr3 PQDs was enhanced due to the surface passivation of defects by BaP. PL excitation and emission spectra, X-ray diffraction, Fourier transform infrared, and time-resolved PL studies suggest that the interaction between MIP@MAPbBr3 PQDs and BaP is a dynamic process. After MIP@MAPbBr3 PQDs were incubated with BaP, the benzene ring in the molecular structure of BaP can interact with MIP@MAPbBr3 PQDs through π electrons, which reduces non-radiative recombination of MIP@MAPbBr3 PQDs and lengthens excited state lifetime. The PL intensity of the MIP@MAPbBr3 PQDs-BaP system was monitored at 520 nm with 375 nm excitation. Under optimized conditions, the PL intensity of MIP@MAPbBr3 PQDs is linear with the concentration of BaP in the 10 to 100 ng·mL-1 range, with a detection limit of 1.6 ng·mL-1. The imprinting factor was 3.9, indicating excellent specificity of MIP@MAPbBr3 PQDs for BaP. The MIP@MAPbBr3 PQDs were subsequently applied to the PL analysis of BaP in sunflower seed oil, cured meat, and grilled fish samples, achieving recoveries from 79.3 to 107%, and relative standard deviations below 10%. This molecularly imprinted fluorescence assay improves the selectivity of BaP in complex mixtures and could be extended to other analytes.

Indole Alkaloids from a Soil-Derived Clonostachys rosea.

Clonorosins A (1) and B (2), two novel indole alkaloids featuring unprecedented 6/5/6/6/5 and 6/5/5 cores, together with seven known indole-linked 2,5-diketopiperazine alkaloids (3-9), were isolated from the soil-derived fungus Clonostachys rosea YRS-06. The new structures were proposed through HR-MS, NMR, and ECD spectroscopic data. They were established by comparing the calculated NMR, ECD, and specific rotation data with the experimental. To assist in determining the absolute configuration of the chiral carbon in the side chain of 2,5-diketopiperazine derivatives, flexible analogues 3i-3iv were synthesized and analyzed. 1 was active against Fusarium oxysporum with an MIC value of 50 µg/mL. 7 and 8 showed excellent activity against human HeLa and HepG2 cells with IC50 values of 0.12-0.60 µM.

Size and temperature dependence of photoluminescence of hybrid perovskite nanocrystals.

In this work, we studied the effects of particles' size and temperature on the photoluminescence (PL) of CH3NH3PbBr3 perovskite nanocrystals (PNCs), with the PNC size controlled by varying the surface passivating ligands. The structural and optical properties of the PNCs were investigated using UV-Vis and PL spectroscopy, revealing strong quantum confinement effects. Temperature dependent PL measurements showed the spectral blue shift of the PL peak for the small PNCs (3.1 ± 0.2 nm) with decreasing temperature from 300 K to 20 K, which is opposite to the red shift with decreasing temperature observed for large- (9.2 ± 0.5 nm) and middle-sized (5.1 ± 0.3 nm) PNCs. The PL lifetime also increased with increasing temperature for the larger PNCs, while it remained about the same for the small and middle-sized PNCs. This increase in lifetime with temperature is attributed to exciton dissociation to free carriers at higher temperatures and to the formation of polar domains in the PNCs. However, the small and middle-sized PNCs did not show such a trend, which may be due to efficient defect passivation as higher concentration of 3-aminopropyl trimethoxysilane (APTMS) was used and to the role of particle size in surface state delocalization. Cryo-X-ray diffraction showed no new peak formation or peak splitting as temperature was varied, which suggests efficient crystal phase stabilization in PNCs of all three sizes controlled by the concentration of APTMS. These results emphasize the importance of size and surface properties of PNCs in their optical properties such as PL quantum yield, PL lifetime, and crystal phase stability.

Molecular Adsorption Mechanism of Elemental Carbon Particles on Leaf Surface.

Plant leaves can effectively capture and retain particulate matter (PM), improving air quality and human health. However, little is known about the adsorption mechanism of PM on leaf surface. Black carbon (BC) has great adverse impact on climate and environment. Four types of elemental carbon (EC) particles, carbon black as a simple model for BC, graphite, reduced graphene oxide, and graphene oxide, and C36H74/C44H88O2 as model compounds for epicuticular wax were chosen to study their interaction and its impact at the molecular level using powder X-ray diffraction and vibrational spectroscopy (infrared and Raman). The results indicate that EC particles and wax can form C-H···π type hydrogen bonding with charge transfer from carbon to wax; therefore, strong attraction is expected between them due to the cooperativity of hydrogen bonding and London dispersion from instantaneous dipoles. In reality, once settled on the leaf surface, especially without wax ultrastructures, BC with extremely large surface-to-volume ratio will likely stick and stay. On the other hand, BC particles can lead to phase transition of epicuticular wax from crystalline to amorphous structures by creating packing disorder and end- gauche defects of wax molecular chain, potentially causing water loss and thereby damage of plants.

Detection of Saturated Fatty Acids Associated with a Self-Healing Synthetic Biological Membrane Using Fiber-Enhanced Surface Enhanced Raman Scattering.

The Synthetic Biological Membrane (SBM) project at NASA Ames developed a portable, self-repairing wastewater purification system. The self-repair process relies upon secreted fatty acids from a genetically engineered organism. However, solubilized fatty acids are difficult to detect using conventional methods. Surface-enhanced Raman scattering (SERS) was used to successfully detect solubilized fatty acids with the following limits of detection: 10-9 M, 10-8 M, 10-9 M, and 10-6 M for decanoic acid, myristic acid, palmitic acid, and stearic acid, respectively. Additionally, hollow core photonic crystal fiber (HCPCF) was applied as the sampling device together with SERS to develop in situ surveillance of the production of fatty acids. Using SERS + HCPCF yielded an 18 fold enhancement in SERS signal for the CH2 twist peak at 1295 cm-1 as compared to SERS alone. The results will help the SBM project to integrate a self-healing wastewater purification membrane into future water recycling systems.

Towards understanding the unusual photoluminescence intensity variation of ultrasmall colloidal PbS quantum dots with the formation of a thin CdS shell.

In this study, we report anomalous size-dependent photoluminescence (PL) intensity variation of PbS quantum dots (QDs) with the formation of a thin CdS shell via a microwave-assisted cation exchange approach. Thin shell formation has been established as an effective strategy for increasing the PL of QDs. Nonetheless, herein we observed an unusual PL decrease in ultrasmall QDs upon shell formation. We attempted to understand this abnormal phenomenon from the perspective of trap density variation and the probability of electrons and holes reaching surface defects. To this end, the quantum yield (QY) and PL lifetime (on the ns-µs time scales) of pristine PbS QDs and PbS/CdS core/shell QDs were measured and the radiative and non-radiative recombination rates were derived and compared. Moreover, transient absorption (TA) analysis (on the fs-ns time scale) was performed to better understand exciton dynamics at early times that lead to and affect longer time dynamics and optical properties such as PL. These experimental results, in conjunction with theoretical calculations of electron and hole wave functions, provide a complete picture of the photophysics governing the core/shell system. A model was proposed to explain the size-dependent optical and dynamic properties observed.

Organolead Halide Perovskite Nanocrystals: Branched Capping Ligands Control Crystal Size and Stability.

CH3 NH3 PbBr3 perovskite nanocrystals (PNCs) of different sizes (ca. 2.5-100 nm) with high photoluminescence (PL) quantum yield (QY; ca. 15-55 %) and product yield have been synthesized using the branched molecules, APTES and NH2 -POSS, as capping ligands. These ligands are sterically hindered, resulting in a uniform size of PNCs. The different capping effects resulting from branched versus straight-chain capping ligands were compared and a possible mechanism proposed to explain the dissolution-precipitation process, which affects the growth and aggregation of PNCs, and thereby their overall stability. Unlike conventional PNCs capped with straight-chain ligands, APTES-capped PNCs show high stability in protic solvents as a result of the strong steric hindrance and propensity for hydrolysis of APTES, which prevent such molecules from reaching and reacting with the core of PNCs.

Photovoltaic properties of multilayered quantum dot/quantum rod-sensitized TiO2 solar cells fabricated by SILAR and electrophoresis.

A multilayered semiconductor sensitizer structure composed of three differently sized CdSe quantum rods (QRs), labeled as Q530, Q575, Q590, were prepared and deposited on the surface of mesoporous TiO2 nanoparticles by electrophoretic deposition (EPD) for photovoltaic applications. By varying the arrangement of layers as well as the time of EPD, the photoconversion efficiency was improved from 2.0% with the single layer of CdSe QRs (TiO2/Q590/ZnS) to 2.9% for multilayers (TiO2/Q590Q575/ZnS). The optimal EPD time was shorter for the multilayered structures. The effect of CdS quantum dots (QDs) deposited by successive ionic layer adsorption and reaction (SILAR) was also investigated. The addition of CdS QDs resulted in the enhancement of efficiency to 4.1% for the configuration (TiO2/CdS/Q590Q575/ZnS), due to increased photocurrent and photovoltage. Based on detailed structural, optical, and photoelectrical studies, the increased photocurrent is attributed to broadened light absorption while the increased voltage is due to a shift in the relevant energy levels.

Simultaneous detection of electronic structure changes from two elements of a bifunctional catalyst using wavelength-dispersive X-ray emission spectroscopy and in situ electrochemistry.

Multielectron catalytic reactions, such as water oxidation, nitrogen reduction, or hydrogen production in enzymes and inorganic catalysts often involve multimetallic clusters. In these systems, the reaction takes place between metals or metals and ligands to facilitate charge transfer, bond formation/breaking, substrate binding, and release of products. In this study, we present a method to detect X-ray emission signals from multiple elements simultaneously, which allows for the study of charge transfer and the sequential chemistry occurring between elements. Kß X-ray emission spectroscopy (XES) probes charge and spin states of metals as well as their ligand environment. A wavelength-dispersive spectrometer based on the von Hamos geometry was used to disperse Kß signals of multiple elements onto a position detector, enabling an XES spectrum to be measured in a single-shot mode. This overcomes the scanning needs of the scanning spectrometers, providing data free from temporal and normalization errors and therefore ideal to follow sequential chemistry at multiple sites. We have applied this method to study MnOx-based bifunctional electrocatalysts for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). In particular, we investigated the effects of adding a secondary element, Ni, to form MnNiOx and its impact on the chemical states and catalytic activity, by tracking the redox characteristics of each element upon sweeping the electrode potential. The detection scheme we describe here is general and can be applied to time-resolved studies of materials consisting of multiple elements, to follow the dynamics of catalytic and electron transfer reactions.

Au nanostructure-decorated TiO2 nanowires exhibiting photoactivity across entire UV-visible region for photoelectrochemical water splitting.

Here we demonstrate that the photoactivity of Au-decorated TiO2 electrodes for photoelectrochemical water oxidation can be effectively enhanced in the entire UV-visible region from 300 to 800 nm by manipulating the shape of the decorated Au nanostructures. The samples were prepared by carefully depositing Au nanoparticles (NPs), Au nanorods (NRs), and a mixture of Au NPs and NRs on the surface of TiO2 nanowire arrays. As compared with bare TiO2, Au NP-decorated TiO2 nanowire electrodes exhibited significantly enhanced photoactivity in both the UV and visible regions. For Au NR-decorated TiO2 electrodes, the photoactivity enhancement was, however, observed in the visible region only, with the largest photocurrent generation achieved at 710 nm. Significantly, TiO2 nanowires deposited with a mixture of Au NPs and NRs showed enhanced photoactivity in the entire UV-visible region. Monochromatic incident photon-to-electron conversion efficiency measurements indicated that excitation of surface plasmon resonance of Au is responsible for the enhanced photoactivity of Au nanostructure-decorated TiO2 nanowires. Photovoltage experiment showed that the enhanced photoactivity of Au NP-decorated TiO2 in the UV region was attributable to the effective surface passivation of Au NPs. Furthermore, 3D finite-difference time domain simulation was performed to investigate the electrical field amplification at the interface between Au nanostructures and TiO2 upon SPR excitation. The results suggested that the enhanced photoactivity of Au NP-decorated TiO2 in the UV region was partially due to the increased optical absorption of TiO2 associated with SPR electrical field amplification. The current study could provide a new paradigm for designing plasmonic metal/semiconductor composite systems to effectively harvest the entire UV-visible light for solar fuel production.

Encapsulating gold nanomaterials into size-controlled human serum albumin nanoparticles for cancer therapy platforms.

Progress has been made in using human serum albumin nanoparticles (HSAPs) as promising colloidal carrier systems for early detection and targeted treatment of cancer and other diseases. Despite this success, there is a current lack of multi-functional HSAP hybrids that offer combinational therapies. The size of the HSAPs has crucial importance on drug loading and in vivo performance and has previously been controlled via manipulation of pH and cross-linking parameters. Gold nanomaterials have also gained attention for medicinal use due to their ability to absorb near-infrared light, thus offering photothermal capabilities. In this study, the desolvation and cross-linking approach was employed to encapsulate gold nanorods, nanoparticles, and nanoshells into HSAPs. Incorporation of gold nanomaterials caused some changes in HSAP sizes, but the general size trends remained. This encasement strategy facilitated size-controlled HSAPs, in the range of 100-300 nm, loaded with gold nanostructures; providing composite particles which incorporate photothermally active components.

Photocycloaddition of Zero-Dimensional Metal Halide Hybrids with Reversible Photochromism.

In this work, two zero-dimensional (0D) metal halide hybrids L2ZnBr4 [1, L = (E)-4-(2-(1H-pyrrol-3-yl)vinyl)-1-methylpyridin-1-ium] and L6Pb3Br12 (2) were prepared, which demonstrated photochromism and photoinduced cracking. Upon irradiation at 450 nm, a single crystal-to-single crystal transformation occurred as a result of the [2 + 2] photocycloaddition of L. Interestingly, compared to the complete photocycloaddition of L in 1, only two-thirds of L monomers could be photodimerized in 2 because of the difference in L orientation. 1 shows reversible photochromic behavior including rapid response time, few cracks, high conversion rate, and good reaction reversibility, while 2 exhibits no significant color change but distinct photoinduced cracking because of the large local lattice strain induced by inhomogeneous and anisotropic deformation. Moreover, the photocycloaddition of L results in the distinct shift of photoluminescence of 1 and 2, attributed to the variation in conjugation of π electrons and distortion of metal halide clusters. As a proof-of-concept, reversible optical writing is demonstrated for 1. These findings provide new insights into the design of stimuli-responsive multifunctional materials.

Ultrafast Exciton Dynamics of CH3NH3PbBr3 Perovskite Nanoclusters.

Exciton dynamics of perovskite nanoclusters has been investigated for the first time using femtosecond transient absorption (TA) and time-resolved photoluminescence (TRPL) spectroscopy. The TA results show two photoinduced absorption signals at 420 and 461 nm and a photoinduced bleach (PB) signal at 448 nm. The analysis of the PB recovery kinetic decay and kinetic model uncovered multiple processes contributing to electron-hole recombination. The fast component (∼8 ps) is attributed to vibrational relaxation within the initial excited state, and the medium component (∼60 ps) is attributed to shallow carrier trapping. The slow component is attributed to deep carrier trapping from the initial conduction band edge (∼666 ps) and the shallow trap state (∼40 ps). The TRPL reveals longer time dynamics, with modeled lifetimes of 6.6 and 93 ns attributed to recombination through the deep trap state and direct band edge recombination, respectively. The significant role of exciton trapping processes in the dynamics indicates that these highly confined nanoclusters have defect-rich surfaces.

Effect of Lattice Disorder on Exciton Dynamics in Copper-Doped InP/ZnSexS1-x Core/Shell Quantum Dots.

InP/ZnSexS1-x core/shell quantum dots (QDs) with varying Cu concentrations were synthesized by a one-pot hot-injection method. X-ray diffraction and high-resolution transmission electron microscopy results indicate that Cu doping did not alter the crystal structure or particle size of the QDs. The optical shifts in UV-visible absorption and photoluminescence (PL) suggest changes in the electronic structure and induction of lattice disorder due to Cu doping. Ultrafast transient absorption spectroscopy (TAS) reveled that a higher Cu-doping level leads to faster charge carrier recombination, likely due to increased nonradiative decay from defect states. Time-resolved PL (TRPL) studies show longer average lifetimes of charge carriers with increased Cu doping. These findings informed the development of a kinetic model to better understand how Cu-induced disorder affects charge carrier dynamics in the QDs, which is important for emerging applications of Cu-doped InP/ZnSexS1-x QDs in optoelectronics.

Formation of Linear Plasmonic Heterotrimers Using Nanoparticle Docking to DNA Origami Cages.

The fabrication of complex assemblies with interesting collective properties from plasmonic nanoparticles (NPs) is often challenging. While DNA-directed self-assembly has emerged as one of the most promising approaches to forming such complex assemblies, the resulting structures tend to have large variability in gap sizes and shapes, as the DNA strands used to organize these particles are flexible, and the polydispersity of the NPs leads to variability in these critical structural features. Here, we use a new strategy termed docking to DNA origami cages (D-DOC) to organize spherical NPs into a linear heterotrimer with a precisely defined geometrical arrangement. Instead of binding NPs to the exterior of the DNA templates, D-DOC binds the NPs to either the interior or the opening of a 3D cage, which significantly reduces the variability of critical structural features by incorporating multiple diametrically arranged capture strands to tether NPs. Additionally, such a spatial arrangement of the capture strand can work synergistically with shape complementarity to achieve tighter confinement. To assemble NPs via D-DOC, we developed a multistep assembly process that first encapsulates an NP inside a cage and then binds two other NPs to the openings. Microscopic characterization shows low variability in the bond angles and gap sizes. Both UV-vis absorption and surface-enhanced Raman scattering (SERS) measurements showed strong plasmonic coupling that aligned with predictions by electrodynamic simulations, further confirming the precision of the assembly. These results suggest D-DOC could open new opportunities in biomolecular sensing, SERS and fluorescence spectroscopies, and energy harvesting through the self-assembly of NPs into more complex 3D assemblies.

Mechanistic study of the covalent loading of paclitaxel via disulfide linkers for controlled drug release.

A novel controlled drug-delivery system (CDDS) based on fluorescent mesoporous silica nanoparticles (FMSN) covalently linked with paclitaxel (PTX) via a disulfide linker was designed and characterized. A PTX prodrug based on a disulfide linker was synthesized, and its drug-delivery mechanism was determined through HPLC characterization. Utilizing the carboxyl group of the prodrug, PTX was covalently conjugated to the surface of amino-functionalized FMSN, with a disulfide linker as a spacer to bridge between PTX and FMSN, and the loading content of PTX reached as high as 13% by weight. The most important feature of this nanoscale CDDS is that the PTX prodrug modules conjugated with FMSN can be activated to its cytotoxic form inside the tumor cells upon internalization and in situ drug release. To prove the efficacy of this CDDS, glutathione-mediated intracellular drug delivery was investigated against the HeLa cell line, and the results indicated that our CDDS showed higher cellular proliferation inhibition against glutathione monoester pretreated cells than against untreated cells and the cytotoxicity increased with increasing intracellular glutathione concentration. The result indicates that CDDS can release PTX molecules to kill cancer cells and the release behavior is GSH-dependent. Furthermore, the in vitro evaluation revealed that the FMSN-PTX conjugate could be effectively taken up by HeLa cells. All of these results suggest that this redox-responsive CDDS is potentially useful as a drug-delivery system that can reduce the toxic and side effects of anticancer drugs.

Experimental and TD-DFT study of optical absorption of six explosive molecules: RDX, HMX, PETN, TNT, TATP, and HMTD.

Time dependent density function theory (TD-DFT) has been utilized to calculate the excitation energies and oscillator strengths of six common explosives: RDX (1,3,5-trinitroperhydro-1,3,5-triazine), ß-HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), TATP (triacetone triperoxide), HMTD (hexamethylene triperoxide diamine), TNT (2,4,6-trinitrotoluene), and PETN (pentaerythritol tetranitrate). The results were compared to experimental UV-vis absorption spectra collected in acetonitrile. Four computational methods were tested including: B3LYP, CAM-B3LYP, ωB97XD, and PBE0. PBE0 outperforms the other methods tested. Basis set effects on the electronic energies and oscillator strengths were evaluated with 6-31G(d), 6-31+G(d), 6-31+G(d,p), and 6-311+G(d,p). The minimal basis set required was 6-31+G(d); however, additional calculations were performed with 6-311+G(d,p). For each molecule studied, the natural transition orbitals (NTOs) were reported for the most prominent singlet excitations. The TD-DFT results have been combined with the IPv calculated by CBS-QB3 to construct energy level diagrams for the six compounds. The results suggest optimization approaches for fluorescence based detection methods for these explosives by guiding materials selections for optimal band alignment between fluorescent probe and explosive analyte. Also, the role of the TNT Meisenheimer complex formation and the resulting electronic structure thereof on of the quenching mechanism of II-VI semiconductors is discussed.

NIR fluorophore-hollow gold nanosphere complex for cancer enzyme-triggered detection and hyperthermia.

Hollow gold nanospheres (HGN) may be delicately tuned to absorb near infrared light (NIR) by tailoring the diameter-to-shell ratio. This unique property can be utilized for enhancing the contrast for the NIR and X-ray/CT imaging, and also noninvasive and local, photothermal hyperthermia by conjugating cancer-targeting molecules on the particle surface. In addition, when an NIR fluorophore is placed on the surface of the NIR-tuned HGNs, the fluorescence can be significantly quenched due to the emitted light absorption by the HGNs. Combining the NIR fluorescence quenching property of HGNs and the enzyme secreting nature of cancer, we have developed a novel enzyme-triggered NIR contrast agent for cancer detection with high specificity. NIR fluorophore Cypate (Indocyanine Green based) was conjugated to HGN via a short spacer for fluorescence quenching. The spacer contains an enzyme-substrate-motif (G-G-R) that can be cleaved by urokinase-type plasminogen activator (uPA, a breast cancer enzyme). The nano-complex normally does not emit fluorescence but, in the presence of uPA, the fluorescence was restored, providing high specificity. The enzyme-specific emission allows us to characterize the nature of the cancer (e.g., invasive, metastatic, etc.). Once the cancer is detected, the same HGNs can be used to deliver heat to the cancer site for cancer-specific hyperthermia.

Ligand-mediated modification of the electronic structure of CdSe quantum dots.

X-ray absorption spectroscopy and ab initio modeling of the experimental spectra have been used to investigate the effects of surface passivation on the unoccupied electronic states of CdSe quantum dots (QDs). Significant differences are observed in the unoccupied electronic structure of the CdSe QDs, which are shown to arise from variations in specific ligand-surface bonding interactions.