Macrophage-Derived 25-Hydroxycholesterol Promotes Vascular Inflammation, Atherogenesis, and Lesion Remodeling.

BACKGROUND: Cross-talk between sterol metabolism and inflammatory pathways has been demonstrated to significantly affect the development of atherosclerosis. Cholesterol biosynthetic intermediates and derivatives are increasingly recognized as key immune regulators of macrophages in response to innate immune activation and lipid overloading. 25-Hydroxycholesterol (25-HC) is produced as an oxidation product of cholesterol by the enzyme cholesterol 25-hydroxylase (CH25H) and belongs to a family of bioactive cholesterol derivatives produced by cells in response to fluctuating cholesterol levels and immune activation. Despite the major role of 25-HC as a mediator of innate and adaptive immune responses, its contribution during the progression of atherosclerosis remains unclear. METHODS: The levels of 25-HC were analyzed by liquid chromatography-mass spectrometry, and the expression of CH25H in different macrophage populations of human or mouse atherosclerotic plaques, respectively. The effect of CH25H on atherosclerosis progression was analyzed by bone marrow adoptive transfer of cells from wild-type or Ch25h-/- mice to lethally irradiated Ldlr-/- mice, followed by a Western diet feeding for 12 weeks. Lipidomic, transcriptomic analysis and effects on macrophage function and signaling were analyzed in vitro from lipid-loaded macrophage isolated from Ldlr-/- or Ch25h-/-;Ldlr-/- mice. The contribution of secreted 25-HC to fibrous cap formation was analyzed using a smooth muscle cell lineage-tracing mouse model, Myh11ERT2CREmT/mG;Ldlr-/-, adoptively transferred with wild-type or Ch25h-/- mice bone marrow followed by 12 weeks of Western diet feeding. RESULTS: We found that 25-HC accumulated in human coronary atherosclerotic lesions and that macrophage-derived 25-HC accelerated atherosclerosis progression, promoting plaque instability through autocrine and paracrine actions. 25-HC amplified the inflammatory response of lipid-loaded macrophages and inhibited the migration of smooth muscle cells within the plaque. 25-HC intensified inflammatory responses of lipid-laden macrophages by modifying the pool of accessible cholesterol in the plasma membrane, which altered Toll-like receptor 4 signaling, promoted nuclear factor-κB-mediated proinflammatory gene expression, and increased apoptosis susceptibility. These effects were independent of 25-HC-mediated modulation of liver X receptor or SREBP (sterol regulatory element-binding protein) transcriptional activity. CONCLUSIONS: Production of 25-HC by activated macrophages amplifies their inflammatory phenotype, thus promoting atherogenesis.

Grain boundary defect engineering in rutile iridium oxide boosts efficient and stable acidic water oxidation.

PEMWE is considered a promising technology for coupling with renewable energy sources to achieve clean hydrogen production. However, constrained by the sluggish kinetics of the anodic OER and the acidic abominable environment render the grand challenges in developing the active and stable OER electrocatalyst, leading to low efficiency of PEMWE. Herein, we develop the rutile-type IrO2 nanoparticles with abundant grain boundaries and the continuous nanostructure through the joule heating and sacrificial template method. DFT calculations verified that grain boundaries can modulate the electronic structure of Ir sites and optimize the adsorption of oxygen intermediates, resulting in the accelerated kinetics. The 350-IrO2 affords a rapid OER process with 20 times higher mass activity (0.61 A mgIr-1) than the commercial IrO2 at 1.50 V vs. RHE. Benefiting from the reduced overpotential and the preservation of the stable rutile structure, 350-IrO2 exhibits the stability of 200 h test at 10 mA cm-2 with only trace decay of 11.8 mV. Moreover, the assembled PEMWE with anode 350-IrO2 catalyst outputs the current density up to 2 A cm-2 with only 1.84 V applied voltage, long-term operation for 100 h without obvious performance degradation at 1 A cm-2.

Mechanism of Xing 9 ling tablet candy for alcoholic liver disease based on network pharmacology.

Xing 9 Ling tablet candy (X9LTC) effectively treats alcoholic liver disease (ALD), but its potential mechanism and molecular targets remain unstudied. We aimed to address this gap using network pharmacology. Furthermore, high-performance liquid chromatography (HPLC) and database analysis revealed a total of 35 active ingredients and 311 corresponding potential targets of X9LTC. Protein interaction analysis revealed PTGS2, JUN, and FOS as its core targets. Enrichment analysis indicated that chemical carcinogenesis-receptor activation, IL-17 and TNF signaling pathway were enriched by multiple core targets, which might be the main pathway of action. Further molecular docking validation showed that the core targets had good binding activities with the identified compounds. Animal experiments showed that X9LTC could reduce the high expression of ALT, AST and TG in the serum of ALD mice, alleviate the lesions in liver tissues, and reverse the high expression of PTGS2, JUN, and FOS proteins in the liver tissues. In this study, we established a method for the determination of X9LTC content for the first time, and predicted its active ingredient and mechanism of action in treating ALD, providing theoretical basis for further research.

Targeted Suppression of miRNA-33 Using pHLIP Improves Atherosclerosis Regression.

BACKGROUND: miRNA therapeutics have gained attention during the past decade. These oligonucleotide treatments can modulate the expression of miRNAs in vivo and could be used to correct the imbalance of gene expression found in human diseases such as obesity, metabolic syndrome, and atherosclerosis. The in vivo efficacy of current anti-miRNA technologies hindered by physiological and cellular barriers to delivery into targeted cells and the nature of miRNAs that allows one to target an entire pathway that may lead to deleterious off-target effects. For these reasons, novel targeted delivery systems to inhibit miRNAs in specific tissues will be important for developing effective therapeutic strategies for numerous diseases including atherosclerosis. METHODS: We used pH low-insertion peptide (pHLIP) constructs as vehicles to deliver microRNA-33-5p (miR-33) antisense oligonucleotides to atherosclerotic plaques. Immunohistochemistry and histology analysis was performed to assess the efficacy of miR-33 silencing in atherosclerotic lesions. We also assessed how miR-33 inhibition affects gene expression in monocytes/macrophages by single-cell RNA transcriptomics. RESULTS: The anti-miR-33 conjugated pHLIP constructs are preferentially delivered to atherosclerotic plaque macrophages. The inhibition of miR-33 using pHLIP-directed macrophage targeting improves atherosclerosis regression by increasing collagen content and decreased lipid accumulation within vascular lesions. Single-cell RNA sequencing analysis revealed higher expression of fibrotic genes (Col2a1, Col3a1, Col1a2, Fn1, etc) and tissue inhibitor of metalloproteinase 3 (Timp3) and downregulation of Mmp12 in macrophages from atherosclerotic lesions targeted by pHLIP-anti-miR-33. CONCLUSIONS: This study provides proof of principle for the application of pHLIP for treating advanced atherosclerosis via pharmacological inhibition of miR-33 in macrophages that avoid the deleterious effects in other metabolic tissues. This may open new therapeutic opportunities for atherosclerosis-associated cardiovascular diseases via selective delivery of other protective miRNAs.

Butyrate enhances CPT1A activity to promote fatty acid oxidation and iTreg differentiation.

Inducible regulatory T (iTreg) cells play a crucial role in immune suppression and are important for the maintenance of immune homeostasis. Mounting evidence has demonstrated connections between iTreg differentiation and metabolic reprogramming, especially rewiring in fatty acid oxidation (FAO). Previous work showed that butyrate, a specific type of short-chain fatty acid (SCFA) readily produced from fiber-rich diets through microbial fermentation, was critical for the maintenance of intestinal homeostasis and capable of promoting iTreg generation by up-regulating histone acetylation for gene expression as an HDAC inhibitor. Here, we revealed that butyrate could also accelerate FAO to facilitate iTreg differentiation. Moreover, butyrate was converted, by acyl-CoA synthetase short-chain family member 2 (ACSS2), into butyryl-CoA (BCoA), which up-regulated CPT1A activity through antagonizing the association of malonyl-CoA (MCoA), the best known metabolic intermediate inhibiting CPT1A, to promote FAO and thereby iTreg differentiation. Mutation of CPT1A at Arg243, a reported amino acid required for MCoA association, impaired both MCoA and BCoA binding, indicating that Arg243 is probably the responsible site for MCoA and BCoA association. Furthermore, blocking BCoA formation by ACSS2 inhibitor compromised butyrate-mediated iTreg generation and mitigation of mouse colitis. Together, we unveil a previously unappreciated role for butyrate in iTreg differentiation and illustrate butyrate-BCoA-CPT1A axis for the regulation of immune homeostasis.

Loss of hepatic miR-33 improves metabolic homeostasis and liver function without altering body weight or atherosclerosis.

miR-33 is an intronic microRNA within the gene encoding the SREBP2 transcription factor. Like its host gene, miR-33 has been shown to be an important regulator of lipid metabolism. Inhibition of miR-33 has been shown to promote cholesterol efflux in macrophages by targeting the cholesterol transporter ABCA1, thus reducing atherosclerotic plaque burden. Inhibition of miR-33 has also been shown to improve high-density lipoprotein (HDL) biogenesis in the liver and increase circulating HDL-C levels in both rodents and nonhuman primates. However, evaluating the extent to which these changes in HDL metabolism contribute to atherogenesis has been hindered by the obesity and metabolic dysfunction observed in whole-body miR-33-knockout mice. To determine the impact of hepatic miR-33 deficiency on obesity, metabolic function, and atherosclerosis, we have generated a conditional knockout mouse model that lacks miR-33 only in the liver. Characterization of this model demonstrates that loss of miR-33 in the liver does not lead to increased body weight or adiposity. Hepatic miR-33 deficiency actually improves regulation of glucose homeostasis and impedes the development of fibrosis and inflammation. We further demonstrate that hepatic miR-33 deficiency increases circulating HDL-C levels and reverse cholesterol transport capacity in mice fed a chow diet, but these changes are not sufficient to reduce atherosclerotic plaque size under hyperlipidemic conditions. By elucidating the role of miR-33 in the liver and the impact of hepatic miR-33 deficiency on obesity and atherosclerosis, this work will help inform ongoing efforts to develop novel targeted therapies against cardiometabolic diseases.

Desmosterol suppresses macrophage inflammasome activation and protects against vascular inflammation and atherosclerosis.

Cholesterol biosynthetic intermediates, such as lanosterol and desmosterol, are emergent immune regulators of macrophages in response to inflammatory stimuli or lipid overloading, respectively. However, the participation of these sterols in regulating macrophage functions in the physiological context of atherosclerosis, an inflammatory disease driven by the accumulation of cholesterol-laden macrophages in the artery wall, has remained elusive. Here, we report that desmosterol, the most abundant cholesterol biosynthetic intermediate in human coronary artery lesions, plays an essential role during atherogenesis, serving as a key molecule integrating cholesterol homeostasis and immune responses in macrophages. Depletion of desmosterol in myeloid cells by overexpression of 3ß-hydroxysterol Δ24-reductase (DHCR24), the enzyme that catalyzes conversion of desmosterol to cholesterol, promotes the progression of atherosclerosis. Single-cell transcriptomics in isolated CD45+CD11b+ cells from atherosclerotic plaques demonstrate that depletion of desmosterol increases interferon responses and attenuates the expression of antiinflammatory macrophage markers. Lipidomic and transcriptomic analysis of in vivo macrophage foam cells demonstrate that desmosterol is a major endogenous liver X receptor (LXR) ligand involved in LXR/retinoid X receptor (RXR) activation and thus macrophage foam cell formation. Decreased desmosterol accumulation in mitochondria promotes macrophage mitochondrial reactive oxygen species production and NLR family pyrin domain containing 3 (NLRP3)-dependent inflammasome activation. Deficiency of NLRP3 or apoptosis-associated speck-like protein containing a CARD (ASC) rescues the increased inflammasome activity and atherogenesis observed in desmosterol-depleted macrophages. Altogether, these findings underscore the critical function of desmosterol in the atherosclerotic plaque to dampen inflammation by integrating with macrophage cholesterol metabolism and inflammatory activation and protecting from disease progression.

Theranostic nanoparticles ZIF-8@ICG for pH/NIR-responsive drug-release and NIR-guided chemo-phototherapy against non-small-cell lung cancer.

This study leverages nanotechnology by encapsulating indocyanine green (ICG) and paclitaxel (Tax) using zeolitic imidazolate frameworks-8 (ZIF-8) as a scaffold. This study aims to investigate the chemo-photothermal therapeutic potential of ZIF-8@ICG@Tax nanoparticles (NPs) in the treatment of non-small cell lung cancer (NSCLC). An "all-in-one" theranostic ZIF-8@ICG@Tax NPs was conducted by self-assembly based on electrostatic interaction. First, the photothermal effect, stability, pH responsiveness, drug release, and blood compatibility of ZIF-8@ICG@Tax were evaluated through in vitro testing. Furthermore, the hepatic and renal toxicity of ZIF-8@ICG@Tax were assessed through in vivo testing. Additionally, the anticancer effects of these nanoparticles were investigated both in vitro and in vivo. Uniform and stable chemo-photothermal ZIF-8@ICG@Tax NPs had been successfully synthesized and had outstanding drug releasing capacities. Moreover, ZIF-8@ICG@Tax NPs showed remarkable responsiveness dependent both on pH in the tumor microenvironment and NIR irradiation, allowing for targeted drug delivery and controlled drug release. NIR irradiation can enhance the tumor cell response to ZIF-8@ICG@Tax uptake, thereby promoting the anti-tumor growth in vitro and in vivo. ZIF-8@ICG@Tax and NIR irradiation have demonstrated remarkable synergistic anti-tumor growth properties compared to their individual components. This novel theranostic chemo-photothermal NPs hold great potential as a viable treatment option for NSCLC.

Revealing Hydrogen Bond Effect in Rechargeable Aqueous Zinc-Organic Batteries.

The surrounding hydrogen bond (H-bond) interaction around the active sites plays indispensable functions in enabling the organic electrode materials (OEMs) to fulfill their roles as ion reservoirs in aqueous zinc-organic batteries (ZOBs). Despite important, there are still no works could fully shed its real effects light on. Herein, quinone-based small molecules with a H-bond evolution model has been rationally selected to disclose the regulation and equilibration of H-bond interaction between OEMs, and OEM and the electrolyte. It has been found that only a suitable H-bond interaction could make the OEMs fully liberate their potential performance. Accordingly, the 2,5-diaminocyclohexa-2,5-diene-1,4-dione (DABQ) with elaborately designed H-bond structure exhibits a capacity of 193.3 mAh g-1 at a record-high mass loading of 66.2 mg cm-2 and 100 % capacity retention after 1500 cycles at 5 A g-1. In addition, the DABQ//Zn battery also possesses air-rechargeable ability by utilizing the chemistry redox of proton. Our results put forward a specific pathway to precise utilization of H-bond to liberate the performance of OEMs.

Reconfiguring the Hydrogen Networks of Aqueous Electrolyte to Stabilize Iron Hexacyanoferrate for High-Voltage Decoupled Cell.

Prussian blue analogs (PBAs) as insertion-type cathodes have attracted significant attention in various aqueous batteries to accommodate metal or non-metal ions while suffering from serious dissolution and consequent inferior lifespan. Herein, we reveal that the dissolution of PBAs primarily originates from the locally elevated pH of electrolytes that are caused by proton co-insertion during discharge. To address this issue, a water-locking electrolyte (WLE) has been strategically implemented, which interrupts the generation and Grotthuss diffusion of protons by breaking the well-connected hydrogen bonding network in aqueous electrolytes. As a result, the WLE enables the iron hexacyanoferrate to endure over 1000 cycles at a 1C rate and supports a high-voltage decoupled cell with an average voltage of 1.95 V. These findings provide insights for mitigating dissolution problems in electrode materials, thereby enhancing the viability and performance of aqueous batteries.

Combining phthalimide innate of a positive-charge nanofiltration membrane for high selectivity and rejection for bivalent cations.

A positively charged nanofiltration (NF) membrane is known to have exceptional separation performance for bivalent cations in aqueous solutions. In this study, a new NF activity layer was created using interfacial polymerization (IP) on a polysulfone (PSF) ultrafiltration substrate membrane. The aqueous phase combines the two monomers of polyethyleneimine (PEI) and phthalimide, while successfully producing a highly efficient and accurate NF membrane. The conditions of the NF membrane were studied and further optimized. The aqueous phase crosslinking process enhances the polymer interaction, resulting in an excellent pure water flux of 7.09 L·m-2·h-1·bar-1 under a pressure of 0.4 MPa. Additionally, the NF membrane shows excellent selectivity toward inorganic salts, with a rejection order of MgCl2 > CaCl2 > MgSO4 > Na2SO4 > NaCl. Under optimal conditions, the membrane was able to reject up to 94.33% of 1,000 mg/L of MgCl2 solution at an ambient temperature. Further to assess the antifouling properties of the membrane with bovine serum albumin (BSA), the flux recovery ratio (FRR) was calculated to be 81.64% after 6 h of filtration. This paper presents an efficient and straightforward approach to customize a positively charged NF membrane. We achieve this by introducing phthalimide, which enhances the membrane's stability and rejection performance.

[Medicinal evolution and modern research progress on Mume Fructus].

Prunus mume is an edible and medicinal material, and Mume Fructus is its processed product, which was first recorded in Shennong's Classic of Materia Medica(Shen Nong Ben Cao Jing). It is an effective drug for stopping diarrhea with astringents and promoting fluid production to quiet ascaris. By consulting the ancient herbal works of the past dynasties, modern codes, and other rela-ted literature, this paper sorted out the medicinal evolution of Mume Fructus, examined the ancient efficacy of Mume Fructus and the main indications, and summarized the inclusion of Mume Fructus in national and provincial standards. It is recorded in the ancient herbal works of the past dynasties that Mume Fructus can be processed by various methods such as roasting, stir-frying or micro-frying, stir-frying with charcoal, single steaming, steaming with wine, and steaming after soaking in wine or vinegar, and prepared into pills, powders, and ointments, which are used in the treatment of fatigue, diabetes, malaria, dysentery, ascariasis, and other diseases. Mume Fructus has been included in nine editions of Chinese Pharmacopoeia and 19 provincial and municipal preparation specifications. The processing method of Mume Fructus is determined, namely, clean P. mume should be softened by moistening in water or steaming and pitted. By reviewing the effects of processing on its chemical composition, pharmacological effects, and its modern clinical application, this paper identified the following issues. The ancient application methods of Mume Fructus are diverse but less commonly used in modern times, there is a lack of standardized research on the processing, and the research on the changes caused by the difference in Mume Fructus before and after processing is not deep. Therefore, it is necessary to further investigate the change pattern of its chemical composition before and after processing and its correlation between its medicinal activity to standardize the processing technology and provide a solid basis for the use of Mume Fructus in parts and its quality control.

In Situ Electrochemical Activation of Hydroxyl Polymer Cathode for High-Performance Aqueous Zinc-Organic Batteries.

The slow reaction kinetics and structural instability of organic electrode materials limit the further performance improvement of aqueous zinc-organic batteries. Herein, we have synthesized a Z-folded hydroxyl polymer polytetrafluorohydroquinone (PTFHQ) with inert hydroxyl groups that could be partially oxidized to the active carbonyl groups through the in situ activation process and then undertake the storage/release of Zn2+ . In the activated PTFHQ, the hydroxyl groups and S atoms enlarge the electronegativity region near the electrochemically active carbonyl groups, enhancing their electrochemical activity. Simultaneously, the residual hydroxyl groups could act as hydrophilic groups to enhance the electrolyte wettability while ensuring the stability of the polymer chain in the electrolyte. Also, the Z-folded structure of PTFHQ plays an important role in reversible binding with Zn2+ and fast ion diffusion. All these benefits make the activated PTFHQ exhibit a high specific capacity of 215 mAh g-1 at 0.1 A g-1 , over 3400 stable cycles with a capacity retention of 92 %, and an outstanding rate capability of 196 mAh g-1 at 20 A g-1 .

A Low-Volatile and Durable Deep Eutectic Electrolyte for High-Performance Lithium-Oxygen Battery.

The lithium-oxygen battery (LOB) with a high theoretical energy density (∼3500 Wh kg-1) has been regarded as a strong competitor for next-generation energy storage systems. However, its performance is still far from satisfactory due to the lack of stable electrolyte that can simultaneously withstand the strong oxidizing environment during battery operation, evaporation by the semiopen feature, and high reactivity of lithium metal anode. Here, we have developed a deep eutectic electrolyte (DEE) that can fulfill all the requirements to enable the long-term operation of LOBs by just simply mixing solid N-methylacetamide (NMA) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) at a certain ratio. The unique interaction of the polar groups in the NMA with the cations and anions in the LiTFSI enables DEE formation, and this NMA-based DEE possesses high ionic conductivity, good thermal, chemical, and electrochemical stability, and good compatibility with the lithium metal anode. As a result, the LOBs with the NMA-based DEE present a high discharge capacity (8647 mAh g-1), excellent rate performance, and superb cycling lifetime (280 cycles). The introduction of DEE into LOBs will inject new vitality into the design of electrolytes and promote the development of high-performance LOBs.

Three Birds with One Stone: An Integrated Cathode-Electrolyte Structure for High-Performance Solid-State Lithium-Oxygen Batteries.

Constructing solid-state lithium-oxygen batteries (SSLOBs) holds a great promise to solve the safety and stability bottlenecks faced by lithium-oxygen batteries (LOBs) with volatile and flammable organic liquid electrolytes. However, the realization of high-performance SSLOBs is full of challenges due to the poor ionic conductivity of solid electrolytes, large interfacial resistance, and limited reaction sites of cathodes. Here, a flexible integrated cathode-electrolyte structure (ICES) is designed to enable the tight connection between the cathode and electrolyte through supporting them on a 3D SiO2 nanofibers (NFs) framework. The intimate cathode-electrolyte structure and the porous SiO2 NFs scaffold combination are favorable for decreasing interfacial resistance and increasing reaction sites. Moreover, the 3D SiO2 NFs framework can also behave as an efficient inorganic filler to enhance the ionic conductivity of the solid polymer electrolyte and its ability to inhibit lithium dendrite growth. As a result, the elaborately designed ICES can simultaneously tackle the issues that limit the performance liberation of SSLOBs, making the batteries deliver a high discharge capacity and a long lifetime of 145 cycles with a cycling capacity of 1000 mAh g-1 at 60 °C, much superior to coventional SSLOBs (50 cycles).

Lithium-Air Batteries: Air-Electrochemistry and Anode Stabilization.

ConspectusIt is a permanent issue for modern society to develop high-energy-density, low-cost, and safe batteries to promote technological innovation and revolutionize the human lifestyle. However, the current popular Li-ion batteries are approaching their ceiling in energy density, and thus other battery systems with more power need to be proposed and studied to guide this revolution. Lithium-air batteries are among the candidates for next-generation batteries because of their high energy density (3500 Wh/kg). The past 20 years have witnessed rapid developments of lithium-air batteries in electrochemistry and material engineering with scientists' collaboration from all over the world. Despite these advances, the investigation on Li-air batteries is still in its infancy, and many bottleneck problems, including fundamental and application difficulties, are waiting to be resolved. For the electrolyte, it is prone to be attacked by intermediates (LiO2, O2-, 1O2, O22-) and decomposed at high voltage, accompanying side reactions that will induce cathode passivation. For the lithium anode, it can be corroded severely by H2O and the side products, thus protection methods are urgently needed. As an integrated system, the realization of high-performance Li-air batteries requires the three components to be optimized simultaneously.In this Account, we are going to summarize our progress for optimizing Li-air batteries in the past decade, including air-electrochemistry and anode optimization. Air-electrochemistry involves the interactions among electrolytes, cathodes, and air, which is a complex issue to understand. The search for stable electrolytes is first introduced because at the early age of its development, the use of incompatible Li-ion battery electrolytes leads to some misunderstandings and troubles in the advances of Li-air batteries. After finding suitable electrolytes for Li-air batteries, the fundamental research in the reaction mechanism starts to boom, and the performance has achieved great improvement. Then, air electrode engineering is introduced to give a general design principle. Examples of carbon-based cathodes and all-metal cathodes are discussed. In addition, to understand the influence of air components on Li-air batteries, the electro-activity of N2 has been tested and the role of CO2 in Li-O2/CO2 has been refreshed. Following this, the strategies for anode optimization, including constructing artificial films, introducing hydrophobic polymer electrolytes, adding electrolyte additives, and designing alloy anodes, have been discussed. Finally, we advocate researchers in this field to conduct cell level optimizations and consider their application scenarios to promote the commercialization of Li-air batteries in the near future.

Preparation of a novel regenerated silk fibroin-based hydrogel for extrusion bioprinting.

Three-dimensional (3D) bioprinting technology, allowing rapid prototyping and personalized customization, has received much attention in recent years, while regenerated silk fibroin (RSF) has also been widely investigated for its excellent biocompatibility, processibility, and comprehensive mechanical properties. However, due to the difficulty in curing RSF aqueous solution and the tendency of conformational transition of RSF chains under shearing, it is rather complicated to fabricate RSF-based materials with high mechanical strength through extrusion bioprinting. To solve this problem, a printable hydrogel with thixotropy was prepared from regenerated silk fibroin with high-molecular-weight (HMWRSF) combined with a small amount of hydroxypropyl methylcellulose (HPMC) in urea containing aqueous solution. It was found that the introduction of urea could not only vary the solid content of the hydrogel to benefit the mechanical properties of the 3D-bioprinted pre-cured hydrogels or 3D-bioprinted sponges, but also expand the "printable window" of this system. Indeed, the printability and rheological properties could be modulated by varying the solid content, the heating time, the urea/HMWRSF weight ratio, etc. Moreover, the microstructure of nanospheres stacked in these lyophilized 3D-bioprinted sponges was interesting to observe, which indicated the existence of microhydrogels and both "the reversible network" and "the irreversible network" in this HMWRSF-based pre-cured hydrogel. Like other HMWRSF materials fabricated in other ways, these 3D-bioprinted HMWRSF-based sponges exhibited good cytocompatibility for dental pulp mesenchymal stem cells. This work may inspire the design of functional HMWRSF-based materials by regulating the relationship between structure and properties.

Tailored design of a novel composite foam of sodium alginate used for fluoride ion removal.

Fluoride is an essential micronutrient for humans. Nonetheless, when the amount of fluoride ion is greater than required, it will cause skeletal fluorosis and dental fluorosis to threaten human health. In this paper, a series of sodium alginate (SA)-based foam materials are prepared by freeze-drying technique and anchored with the nano-activated alumina (nAl2O3) in the SA to obtain a novel adsorbent of SA-nAl2O3 foam used for fluoride ions removal. The SA-nAl2O3 foam morphology was further explored and confirmed that nAl2O3 existed stably in the SA. The adsorption results showed that the maximal fluoride ion adsorption capacity was 5.09 mg/g with 20 mg/L fluorine solutions at a pH of 3. The adsorption isotherm fitted adequately to the Langmuir isotherm model, which demonstrated that the adsorption process is closer to monolayer adsorption. The adsorption kinetics behavior of SA-nAl2O3 foam was described by a pseudo-second-order model, and the adsorption process occurred by chemisorption. Adsorption thermodynamics analysis emphasized that the adsorption process was spontaneous and endothermic. The main mechanism of the foam is ion exchange. The SA-nAl2O3 foam exhibited excellent regeneration performance and stability after three cycles.

Effective fluorine removal using mixed matrix membrane based on polysulfone: adsorption performance and diffusion behavior.

Fluorine is one of the essential trace elements for human life activities, but excessive intake of fluoride poses a great risk to people's health. In this paper, a series of mixed matrix membrane (MMM)-based polysulfone for removing fluoride were prepared by phase inversion, and their properties, adsorption capacity, adsorption isotherms, adsorption kinetics of fluoride ions, and mechanism were all investigated. The results confirmed that the MMM contained a large number of hydroxyl and aluminum functional groups due to resin being added. The MMM exhibited the best fluorine ion adsorption capacity of 2.502 mg/g at a pH of 6 with the initial concentration of 6 mg/L. As well, adsorption kinetics of fluorine ion on MMM followed the pseudo-second-order model, while the adsorption behavior of fluorine ion on MMM was well simulated by the Langmuir isotherm model. The adsorption capacity of MMM remained stable after six cycles and the regeneration efficiency was still above 80%, resulting in a long-term stability adequate for fluorine ion removal. Complexation and ion exchange played a key role in the fluorine ion adsorption of MMM. These results indicated the MMM as novel type of absorbent had an excellent capacity for removing fluoride.

Progress on the study of nucleosome reorganization during cellular reprogramming.

Cellular reprogramming is the process during which epigenetic markers of nuclear genome are deleted and remodeled during sperm-egg binding or nuclear transplantation, thereby rendering differentiated cells totipotent. The main cellular reprogramming methods are cell fusion, somatic cell nuclear transplantation, and induced pluripotent stem cells. Nucleosomes are the basic structural and functional units of chromatin, and nucleosome localization has an important role in regulating gene expression and the state of the cell. The occupancy and location of nucleosomes also change dramatically during cellular reprogramming, while the occupancy of nucleosomes around the transcriptional start site also decreases to promote the expression of pluripotency genes. In this review, we summarize the role of nucleosome localization in gene activation and repression, chromatin remodeling, and transcription factor recognition, with the aim of providing an important basis for an in-depth analysis of cellular reprogramming mechanisms.