Entropy-Driven Strongly Confined Low-Toxicity Pure-Red Perovskite Quantum Dots for Spectrally Stable Light-Emitting Diodes.

Spectrally stable pure-red perovskite quantum dots (QDs) with low lead content are essential for high-definition displays but are difficult to synthesize due to QD self-purification. Here, we make use of entropy-driven quantum-confined pure-red perovskite QDs to fabricate light-emitting diodes (LEDs) that have low toxicity and are efficient and spectrum-stable. Based on experimental data and first-principles calculations, multiple element alloying results in a 60% reduction in lead content while improving QD entropy to promote crystal stability. Entropy-driven QDs exhibit photoluminescence with 100% quantum yields and single-exponential decay lifetimes without alteration of their morphology or crystal structure. The pure-red LEDs utilizing entropy-driven QDs have spectrally stable electroluminescence, achieving a brightness of 4932 cd/m2, a maximum external quantum efficiency of over 20%, and a 15-fold longer operational lifetime than the CsPbI3 QD-based LEDs. These achievements demonstrate that entropy-driven QDs can mitigate local compositional heterogeneity and ion migration.

Functional Noncentrosymmetric Nanoparticle-Nanofiber Hybrids via Selective Fragmentation.

Noncentrosymmetric nanostructures are an attractive synthetic target as they can exhibit complex interparticle interactions useful for numerous applications. However, generating uniform, colloidally stable, noncentrosymmetric nanoparticles with low aspect ratios is a significant challenge using solution self-assembly approaches. Herein, we outline the synthesis of noncentrosymmetric multiblock co-nanofibers by subsequent living crystallization-driven self-assembly of block co-polymers, spatially confined attachment of nanoparticles, and localized nanofiber fragmentation. Using this strategy, we have fabricated uniform diblock and triblock noncentrosymmetric π-conjugated nanofiber-nanoparticle hybrid structures. Additionally, in contrast to Brownian motion typical of centrosymmetric nanoparticles, we demonstrated that these noncentrosymmetric nanofibers undergo ballistic motion in the presence of H2O2 and thus could be employed as nanomotors in various applications, including drug delivery and environmental remediation.

Triple Ligand Engineered Gold Nanoclusters with Enhanced Fluorescence and Device Compatibility for Efficient Electroluminescence Light-Emitting Diodes.

Gold nanoclusters (Au NCs) are potential emitters for electroluminescent light-emitting diodes (EL-LEDs) but restricted by the limited photoluminescence quantum yield (PLQY) and poor device compatibility. Herein, triple ligand engineered Au NCs enable the fabrication of Au NC-based LEDs with improved EL efficiency. Rigidified triple ligand shells greatly reduce the nonradiative transition and thus increase the PLQY of Au NCs from 2.1 to 73.4%. Most importantly, this strategy significantly improves the compatibility between Au NCs and charge transport materials in EL-LED fabrication. As a result, the EL-LEDs reach a maximum brightness of 1104 cd/m2 and an external quantum efficiency of 5.1%, which is the highest recorded for any reported Au NC-based EL-LEDs.

Exposure to the mycotoxin deoxynivalenol reduces the transport of conjugated bile acids by intestinal Caco-2 cells.

Conjugated bile acids are synthesized in liver and subsequently secreted into the intestinal lumen from which they are actively reabsorbed and transported back to liver. The efficient enterohepatic circulation of conjugated bile acids is important to maintain homeostasis. The mycotoxin deoxynivalenol (DON) is a fungal secondary metabolite that contaminates cereal food. Upon human exposure, it can cause intestinal dysfunction. We explored the effects of DON exposure on the intestinal absorption of conjugated bile acids and the expression of bile acid transporters using an in vitro model based on Caco-2 cell layers grown in transwells. Our study shows that the transport rate of taurocholic acid (TCA) is decreased after 48-h pre-exposure of the Caco-2 cells to 2 µM DON, which is a realistic intestinal DON concentration. Exposure to DON downregulates expression of the genes coding for the apical sodium-dependent bile acid transporter (ASBT), the ileal bile acid-binding protein (IBABP) and the organic solute transporter α (OSTα), and it counteracts the agonist activity of Farnesoid X receptor (FXR) agonist GW4064 on these genes. In addition, the transport of ten taurine or glycine-conjugated bile acids in a physiological relevant mixture by the intestinal Caco-2 cell layers was decreased after pre-exposure of the cells to DON, pointing at a potential for DON-mediated accumulation of the conjugated bile acids at the intestinal luminal side. Together the results reveal that DON inhibits intestinal bile acid reabsorption by reducing the expression of bile acid transporters thereby affecting bile acid intestinal kinetics, leading to bile acid malabsorption in the intestine. Our study provides new insights into the hazards of DON exposure.

In vitro models to detect in vivo bile acid changes induced by antibiotics.

Bile acid homeostasis plays an important role in many biological activities through the bile-liver-gut axis. In this study, two in vitro models were applied to further elucidate the mode of action underlying reported in vivo bile acid changes induced by antibiotics (colistin sulfate, tobramycin, meropenem trihydrate, and doripenem hydrate). 16S rRNA analysis of rat fecal samples anaerobically incubated with these antibiotics showed that especially tobramycin induced changes in the gut microbiota. Furthermore, tobramycin was shown to inhibit the microbial deconjugation of taurocholic acid (TCA) and the transport of TCA over an in vitro Caco-2 cell layer used as a model to mimic intestinal bile acid reuptake. The effects induced by the antibiotics in the in vitro model systems provide novel and complementary insight explaining the effects of the antibiotics on microbiota and fecal bile acid levels upon 28-day in vivo treatment of rats. In particular, our results provide insight in the mode(s) of action underlying the increased levels of TCA in the feces upon tobramycin exposure. Altogether, the results of the present study provide a proof-of-principle on how in vitro models can be used to elucidate in vivo effects on bile acid homeostasis, and to obtain insight in the mode(s) of action underlying the effect of an antibiotic, in this case tobramycin, on bile acid homeostasis via effects on intestinal bile acid metabolism and reuptake.

The Effect of Angiogenesis-Based Scaffold of MesoporousBioactive Glass Nanofiber on Osteogenesis.

There is still an urgent need for more efficient biological scaffolds to promote the healing of bone defects. Vessels can accelerate bone growth and regeneration by transporting nutrients, which is an excellent method to jointly increase osteogenesis and angiogenesis in bone regeneration. Therefore, we aimed to prepare a composite scaffold that could promote osteogenesis with angiogenesis to enhance bone defect repair. Here, we report that scaffolds were prepared by coaxial electrospinning with mesoporous bioactive glass modified with amino (MBG-NH2) adsorbing insulin-like growth factor-1 (IGF-1) as the core and silk fibroin (SF) adsorbing vascular endothelial growth factor (VEGF) as the shell. These scaffolds were named MBG-NH2/IGF@SF/VEGF and might be used as repair materials to promote bone defect repair. Interestingly, we found that the MBG-NH2/IGF@SF/VEGF scaffolds had nano-scale morphology and high porosity, as well as enough mechanical strength to support the tissue. Moreover, MBG-NH2 could sustain the release of IGF-1 to achieve long-term repair. Additionally, the MBG-NH2/IGF@SF/VEGF scaffolds could significantly promote the mRNA expression levels of osteogenic marker genes and the protein expression levels of Bmp2 and Runx2 in bone marrow mesenchymal stem cells (BMSCs). Meanwhile, the MBG-NH2/IGF@SF/VEGF scaffolds promoted osteogenesis by simulating Runx2 transcription activity through the phosphorylated Erk1/2-activated pathway. Intriguingly, the MBG-NH2/IGF@SF/VEGF scaffolds could also significantly promote the mRNA expression level of angiogenesis marker genes and the protein expression level of CD31. Furthermore, RNA sequencing verified that the MBG-NH2/IGF@SF/VEGF scaffolds had excellent performance in promoting bone defect repair and angiogenesis. Consistent with these observations, we found that the MBG-NH2/IGF@SF/VEGF scaffolds demonstrated a good repair effect on a critical skull defect in mice in vivo, which not only promoted the formation of blood vessels in the haversian canal but also accelerated the bone repair process. We concluded that these MBG-NH2/IGF@SF/VEGF scaffolds could promote bone defect repair under accelerating angiogenesis. Our finding provides a new potential biomaterial for bone tissue engineering.

A Simplified Fractional Order PID Controller's Optimal Tuning: A Case Study on a PMSM Speed Servo.

A simplified fractional order PID (FOPID) controller is proposed by the suitable definition of the parameter relation with the optimized changeable coefficient. The number of the pending controller parameters is reduced, but all the proportional, integral, and derivative components are kept. The estimation model of the optimal relation coefficient between the controller parameters is established, according to which the optimal FOPID controller parameters can be calculated analytically. A case study is provided, focusing on the practical application of the simplified FOPID controller to a permanent magnet synchronous motor (PMSM) speed servo. The dynamic performance of the simplified FOPID control system is tested by motor speed control simulation and experiments. Comparisons are performed between the control systems using the proposed method and those using some other existing methods. According to the simulation and experimental results, the simplified FOPID control system achieves the optimal dynamic performance. Therefore, the validity of the proposed controller structure and tuning method is demonstrated.

Promising targets based on pattern recognition receptors for cancer immunotherapy.

Pattern recognition receptors (PRRs) recognize pathogen-associated as well as endogenous damage-associated molecular patterns. Once ligand binding occurs, signaling cascades develop within the cells to activate effector molecules. Thus, PRRs play key roles in immune surveillance and immune tolerance. Due to their differences in cell localization, stage of action, and ligand recognition, PRRs form a defense network from the cell membrane to the cytoplasm, constituting the regulatory networks of the innate and adaptive immune systems in cancer. However, the activation of PRRs cannot only recruit and activate anti-tumor immune cells, but also promote the release of inflammatory cytokines, which may lead to the formation of the local inflammatory microenvironment in tumors, thus promoting the development of cancer. Therefore, the dual regulation of PRRs in the immune system has attracted much attention, with current research being focused on maximizing their anti-tumor immune activity. In addition to their expression in host cells, PRRs are also expressed in tumor cells; this is closely related to the occurrence and development of cancer. This review attempts to clarify the feasibility and directions for the development of PRR-based applications in cancer immunotherapy by elaborating on the mechanisms underlying the action of PRRs and the current status of immunotherapies.

Residual detection of naproxen, methyltestosterone and 17α-hydroxyprogesterone caproate in aquatic products by simple liquid-liquid extraction method coupled with liquid chromatography-tandem mass spectrometry.

In the present study, we aimed to develop a reliable screening method based on liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for the detection and quantification of naproxen, methyltestosterone and 17α-hydroxyprogesterone caproate residues. The target analytes were extracted from samples of eel, flatfish and shrimp using acetonitrile with 1% acetic acid, followed by liquid-liquid purification with n-hexane. Chromatographic separation was achieved on a reversed-phase analytical column using 0.1% formic acid containing 10 mm ammonium formate in distilled water (A) and methanol (B) as mobile phases. All the matrix-matched calibration curves were linear (R2 ≥ 0.99) over the concentration range of the tested analytes. Recovery at three spiking levels (0.005, 0.01 and 0.02 mg/kg) ranged from 68 to 117% with intra- and inter-day precisions <10%. Five market samples for each matrix (eel, flatfish and shrimp) were collected and tested for method application. In summary, the proposed method is feasible to screen and quantify the analytes with high selectivity in aquatic food products meant for human consumption.

Development and validation of a solid-phase extraction method coupled with LC-MS/MS for the simultaneous determination of 16 antibiotic residues in duck meat.

The present study was carried out to determine 16 antibiotics belonging to seven different groups (tetracyclines, sulfonamides, penicillins, fluoroquinolones, macrolides, lincosamides and trimethoprims) in duck meat. A solid-phase extraction method based on Oasis HLB cartridges coupled with liquid chromatography-electrospray ionization tandem mass spectrometry was developed. Solutions of 0.1 m ethylenediaminetetraacetic acid disodium salt and 2% trifluoroacetic acid were used for the preliminary extraction of the target antibiotics from duck meat and n-hexane was used for purification prior to solid-phase extraction. Mobile phases composed of 0.1% trifluoroacetic acid in distilled water (solvent A) and 0.1% trifluoroacetic acid in methanol (solvent B), combined with a reversed-phase C18 analytical column, provided the optimal separation and signal intensity. The linearity of the method was assessed using six concentrations (5, 10, 20, 30, 40, and 50 µg/kg), and the recoveries, which were calculated at three spiking concentrations (5, 10 and 20 µg/kg), were in the range 69.8-103.3% with relative standard deviations (RSDs) ≤ 6.9% for the 16 tested antibiotics. Matrix effects ranging from -47.2 to -13.5% were observed for all the analytes, and the limits of quantitation (LOQ), which ranged from 4.93 to 26.21 µg/kg, were much lower than the maximum residue limits (MRLs) set by various regulatory authorities. Ten samples from a market were tested, and none of the target analytes were detected. Thus, a simple and versatile protocol has been developed to detect and quantify 16 antibiotics in duck meat samples.

Residue analysis of tebufenozide and indoxacarb in chicken muscle, milk, egg and aquatic animal products using liquid chromatography-tandem mass spectrometry.

We developed an analytical method using liquid-liquid extraction (LLE) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) to detect and quantify tebufenozide (TEB) and indoxacarb (IND) residues in animal and aquatic products (chicken muscle, milk, egg, eel, flatfish, and shrimp). The target compounds were extracted using 1% acetic acid (0.1% acetic acid for egg only) in acetonitrile and purified using n-hexane. The analytes were separated on a Gemini-NX C18 column using (a) distilled water with 0.1% formic acid and 5 mm ammonium acetate and (b) methanol with 0.1% formic acid as the mobile phase. All six-point matrix-matched calibration curves showed good linearity with coefficients of determination (R2 ) ≥0.9864 over a concentration range of 5-50 µg/kg. Intra- and inter-day accuracy was expressed as the recovery rate at three spiking levels and ranged between 73.22 and 114.93% in all matrices, with a relative standard deviation (RSD, corresponding to precision) ≤13.87%. The limits of quantification (LOQ) of all target analytes ranged from 2 to 20 µg/kg, which were substantially lower than the maximum residue limits (MRLs) specified by the regulatory agencies of different countries. All samples were collected from different markets in Seoul, Republic of Korea, and tested negative for tebufenozide and indoxacarb residues. These results show that the method developed is robust and may be a promising tool to detect trace levels of the target analytes in animal products.

Simultaneous determination of spinosad, temephos, and piperonyl butoxide in animal-derived foods using LC-MS/MS.

Pesticides, which are used as plant protection products, can enter the food chain, and exposure to these xenobiotics can cause a wide array of health problems in humans. Therefore, the objective of the present study was to develop an analytical method for the simultaneous determination of residual spinosad (sum of spinosyn A and D), temephos and piperonyl butoxide in porcine muscle, egg, milk, eel, flatfish and shrimp (sampling period: February to June 2018) using liquid chromatography-triple quadrupole tandem mass spectrometry (LC-MS/MS). The target analytes were extracted with a combination of acidified acetonitrile and ethyl acetate and subsequently purified with original QuEChERS kits (composed of magnesium sulfate and sodium chloride) as well as n-hexane. All analytes were separated on a reversed-phase analytical column using a mobile phase of (A) 0.1% formic acid containing 10 mm ammonium formate in distilled water and (B) methanol. Good linearity (R2 ≥ 0.980) was achieved over the tested concentration range (3.5-35 µg/kg for spinosyn A; 1.5-15 µg/kg for spinosyn D; 5-50 µg/kg for temephos and piperonyl butoxide) in matrix-matched standard calibrations. Fortified samples at three spiking levels yielded recoveries in the range of 71-105% with relative standard deviations ≤9.2%. The applicability of the method was evaluated via evaluating samples collected from a large wholesale market located in Seoul, and none of the samples contained any of the target analytes. In conclusion, the current approach is simple, efficient and reliable and can successfully determine the residual levels of spinosad, temephos and piperonyl butoxide in complex animal-derived food products.

Colorimetric bio-barcode immunoassay for parathion based on amplification by using platinum nanoparticles acting as a nanozyme.

A competitive bio-barcode immunoassay is described for the trace detection of parathion in water, pear, cabbage, and rice samples. It is based on amplification by platinum nanoparticle acting as a nanozyme. Gold nanoparticles (AuNPs) were modified with (a) monoclonal antibodies (mAbs) against parathion, and (b) thiolated single-stranded DNA (ssDNA) oligonucleotides. Magnetic nanoparticles (MNPs) were functionalized with ovalbumin coupled with parathion hapten. Parathion and its hapten compete with mAbs on the surface of the AuNPs. Subsequently, the platinum nanoparticles (PtNPs) probe, which was functionalized with the complementary thiolated ssDNA (C-ssDNA), was added to the reaction mixture for the detection of parathion. The signal was catalytically amplified by coupling with platinum nanozyme using teramethylbenzidine and H2O2 as the chromogenic system. The immunoassay has a linear range that extends from 0.01-50 µg·L-1, and the limit of detection is 2.0 × 10-3 µg·L-1. The recoveries and relative standard deviations (RSDs) ranged from 91.1-114.4% and 3.6-15.8%, respectively. The method correlates well with data obtained by gas chromatography-tandem mass spectrometry (GC-MS/MS). Graphical abstract The parathion and the magnetic nanoparticles (MNPs) labelled with hapten-OVA competitively reacted to AuNPs modified with mAbs and thiolated DNA for the detection of parathion. The signal was catalyzed by platinum nanozyme. The limit of detection for parathion is 2.0 ng·L-1.

Quantification of artesunate and its metabolite, dihydroartemisinin, in animal products using liquid chromatography-tandem mass spectrometry.

An analytical approach using a modified quick, easy, cheap, effective, rugged, and safe extraction method followed by liquid chromatography with electrospray ionization tandem mass spectrometry was developed herein for the determination of artesunate and its metabolite, dihydroarteminsinin in porcine muscle, egg, eel, flatfish, and shrimp. 10% trichloroacetic acid in acetonitrile mixed with ethyl acetate was used as an extraction solvent. To obtain a good separation, a Phenomenex Kinetex reversed-phase analytical column was selected with mobile phase consisting of distilled water (A) and acetonitrile (B), both containing 0.05% formic acid. Good linearity was achieved using matrix-matched calibrations constructed from six concentrations (5-50 µg/kg) with determinant coefficients ≥0.9918. Recoveries estimated from three spiking concentrations (5, 10, and 20 µg/kg) ranged between 71.3 and 104.7% in all matrixes with relative standard deviations ≤8.3%. A variety of samples purchased from markets in Seoul were tested following the protocol described herein. The artesunate and dihydroarteminsinin were not detected in any matrix. The methodology proposed could be used for routine determination of artesunate and its metabolite, dihydroartemisinin in various animal products having variable percentages of fat and protein.

Determination of metoserpate, buquinolate, and diclofenac in pork, eggs, and milk using liquid chromatography-tandem mass spectrometry.

In this work, a method was developed for the simultaneous determination of residual metoserpate, buquinolate and diclofenac in pork, milk, and eggs. Samples were extracted with 0.1% formic acid in acetonitrile, defatted with n-hexane, and filtered prior to analysis using liquid chromatography-tandem mass spectrometry. The analytes were separated on a C18 column using 0.1% acetic acid and methanol as the mobile phase. The matrix-matched calibration curves showed good linearity over a concentration range of 5-50 ng/g with coefficients of determination (R2 ) ≥0.991. The intra- and inter-day accuracies (expressed as recovery percentage values) calculated using three spiking levels (5, 10, and 20 µg/kg) were 80-108.65 and 74.06-107.15%, respectively, and the precisions (expressed as relative standard deviation) were 2.86-13.67 and 0.05-11.74%, respectively, for the tested drugs determined in various matrices. The limits of quantification (1 and 2 µg/kg) were below the uniform residual level (0.01 mg/kg) set for compounds that have no specific maximum residue limit (MRL). The developed method was tested using market samples and none of the target analytes was detected in any of the samples. The validated method proved to be practicable for detection of the tested analytes in pork, milk, and eggs.

Determination of halquinol residual levels in animal-derived food products using liquid chromatography-tandem mass spectrometry.

A reliable and highly sensitive detection method based on liquid chromatography coupled with triple quadrupole electrospray tandem mass spectrometry (LC-MS/MS) analysis has been developed for determination and quantification of halquinol, including 5,7-dichloroquinolin-8-ol and 5-chloroquinolin-8-ol. The target analytes were extracted from porcine muscle, egg, milk, eel, flatfish and shrimp using a mixture of acetonitrile and ethyl acetate followed by liquid-liquid purification with n-hexane. The analytes were separated on an Agilent Eclipse XDB-C18 reversed-phase analytical column using 0.05% formic acid in distilled water and acetonitrile as mobile phases. Good linearity from six-point matrix-matched calibration was obtained with correlation coefficients (R2 ) ≥ 0.9904. Recoveries from three spiking levels (5, 10 and 20 µg/kg) ranged between 70.6 and 101.7% in various matrices with relative standard deviations ≤8.6%. Samples acquired from markets located in Seoul, Republic of Korea, tested negative for the target analytes. In conclusion, the proposed method is versatile and precise for the routine detection of halquinol residual levels in animal-derived food products intended for human consumption.

Development and validation of a simple solid-phase extraction method coupled with liquid chromatography-triple quadrupole tandem mass spectrometry for simultaneous determination of lincomycin, tylosin A and tylosin B in royal jelly.

We have developed an analytical method for the determination of lincomycin, tylosin A and tylosin B residues in royal jelly using liquid chromatography-triple quadrupole tandem mass spectrometry analysis. For extraction and purification, we employed 1% trifluoroacetic acid and 0.1 m Na2 EDTA solutions along with an Oasis HLB cartridge. The target antibiotics were well separated in a Kinetex EVO C18 reversed-phase analytical column using a combination of 0.1% formate acid in ultrapure water (A) and acetonitrile (B) as the mobile phase. Good linearity was achieved over the tested concentration range (5-50 µg/kg) in matrix-matched standard calibration. The coefficients of determination (R2 ) were 0.9933, 0.9933 and 0.996, for tylosin A, tylosin B and lincomycin, respectively. Fortified royal jelly spiked with three different concentrations of the tested antibiotics (5, 10 and 20 µg/kg) yielded recoveries in the range 80.94-109.26% with relative standard deviations ≤4%. The proposed method was applied to monitor 11 brand of royal jelly collected from domestic markets and an imported brand from New Zealand; all the samples tested negative for lincomycin, tylosin A and tylosin B residues. In conclusion, 1% trifluoroacetic acid and 0.1 m Na2 EDTA aqueous solvents combined with solid-phase extraction could effectively complete the sample preparation process for royal jelly before analysis. The developed approach can be applied for a routine analysis of lincomycin, tylosin A and tylosin B residues in royal jelly.

Redox-Active Reagents for Photocatalytic Generation of the OCF3 Radical and (Hetero)Aryl C-H Trifluoromethoxylation.

The trifluoromethoxy (OCF3 ) radical is of great importance in organic chemistry. Yet, the catalytic and selective generation of this radical at room temperature and pressure remains a longstanding challenge. Herein, the design and development of a redox-active cationic reagent (1) that enables the formation of the OCF3 radical in a controllable, selective, and catalytic fashion under visible-light photocatalytic conditions is reported. More importantly, the reagent allows catalytic, intermolecular C-H trifluoromethoxylation of a broad array of (hetero)arenes and biorelevant compounds. Experimental and computational studies suggest single electron transfer (SET) from excited photoredox catalysts to 1 resulting in exclusive liberation of the OCF3 radical. Addition of this radical to (hetero)arenes gives trifluoromethoxylated cyclohexadienyl radicals that are oxidized and deprotonated to afford the products of trifluoromethoxylation.

Catalytic C-H Trifluoromethoxylation of Arenes and Heteroarenes.

The intermolecular C-H trifluoromethoxylation of arenes remains a long-standing and unsolved problem in organic synthesis. Herein, we report the first catalytic protocol employing a novel trifluoromethoxylating reagent and redox-active catalysts for the direct (hetero)aryl C-H trifluoromethoxylation. Our approach is operationally simple, proceeds at room temperature, uses easy-to-handle reagents, requires only 0.03 mol % of redox-active catalysts, does not need specialized reaction apparatus, and tolerates a wide variety of functional groups and complex structures such as sugars and natural product derivatives. Importantly, both ground-state and photoexcited redox-active catalysts are effective. Detailed computational and experimental studies suggest a unique reaction pathway where photoexcitation of the trifluoromethoxylating reagent releases the OCF3 radical that is trapped by (hetero)arenes. The resulting cyclohexadienyl radicals are oxidized by redox-active catalysts and deprotonated to form the desired products of trifluoromethoxylation.

Analysis of toldimfos in porcine muscle and bovine milk using liquid chromatography-triple quadrupole mass spectrometry.

An analytical method was developed for the detection of toldimfos sodium residues in porcine muscle and bovine milk using liquid chromatography-triple quadrupole tandem mass spectrometry (LC-MS/MS) analysis. The drug was extracted from muscle and milk using 10 mm ammonium formate in acetonitrile and then purified using n-hexane. The drug was well separated on a Luna C18 column using a mixture of 10 mm ammonium formate in ultrapure water (A) and acetonitrile (B) as the mobile phase. Good linearity was achieved over the tested concentration range (0.005-0.03 mg/kg) in matrix-matched standard calibration. The determination coefficients (R2 ) were 0.9942 and 0.9898 for muscle and milk, respectively. Fortified porcine muscle and bovine milk contained concentrations equivalent to and twice the limit of quantification (0.005 mg/kg) yielded recoveries in the range of 75.58-89.74% and relative standard deviations of ≤8.87%. Samples collected from large markets located in Seoul, Republic of Korea, tested negative for toldimfos sodium residue. In conclusion, ammonium formate in acetonitrile can effectively extract toldimfos sodium from porcine muscle and bovine milk without solid-phase extraction, which is usually required for cleanup before analysis. This method can be applied for the routine analysis of toldimfos in foods of animal origins.