Activated FeS2 @NiS2 Core-Shell Structure Boosting Cascade Reaction for Superior Electrocatalytic Oxygen Evolution.

Unlike single-step reactions, multi-step reactions can be greatly facilitated only if all the intermediate reactions can be catalyzed simultaneously and progressively. Herein, the theoretical analysis and experiments to illustrate the superiority of the cascade oxygen evolution reaction (OER) are conducted. As different OER intermediate reactions demand Fex Ni1-x OOH with altered Fe/Ni ratios, gradient Fe-doped NiOOH can be an ideal electrocatalyst for the efficient cascade OER in line. Fine controlling of the nucleation sequence of iron and nickel sulfides leads to a FeS2 @NiS2 core-shell structure. The activated outward diffusion of Fe dopants results in the gradient Fe/Ni ratios in the Fex Ni1-x OOH shell, where a cascade OER can happen. Electrochemical tests suggest that the FeS2 @NiS2 only needs an overpotential of 237 mV to reach the current density of 10 mA cm-2 , with fast reaction kinetics and good stability.

Medium/High-Entropy Amalgamated Core/Shell Nanoplate Achieves Efficient Formic Acid Catalysis for Direct Formic Acid Fuel Cell.

High-entropy alloys (HEAs) have been attracting extensive research interests in designing advanced nanomaterials, while their precise control is still in the infancy stage. Herein, we have reported a well-defined PtBiPbNiCo hexagonal nanoplates (HEA HPs) as high-performance electrocatalysts. Structure analysis decodes that the HEA HP is constructed with PtBiPb medium-entropy core and PtBiNiCo high-entropy shell. Significantly, the HEA HPs can reach the specific and mass activities of 27.2 mA cm-2 and 7.1 A mgPt -1 for formic acid oxidation reaction (FAOR), being the record catalyst ever achieved in Pt-based catalysts, and can realize the membrane electrode assembly (MEA) power density (321.2 mW cm-2 ) in fuel cell. Further experimental and theoretical analyses collectively evidence that the hexagonal intermetallic core/atomic layer shell structure and multi-element synergy greatly promote the direct dehydrogenation pathway of formic acid molecule and suppress the formation of CO*.

Photocatalytic Overall Water Splitting over PbTiO3 Modulated by Oxygen Vacancy and Ferroelectric Polarization.

Ferroelectric materials hold great promise in the field of photocatalytic water splitting due to their spontaneous polarization that sets up an inherent internal field for the spatial separation of photogenerated charges. The ferroelectric polarization, however, is generally accompanied by some intrinsic defects, particularly oxygen vacancies, whose impact upon photocatalysis is far from being fully understood and modulated. Here, we have studied the role of oxygen vacancies over the photocatalytic behavior of single-domain PbTiO3 through a combination of theoretical and experimental viewpoints. Our results indicate that the oxygen vacancies in the negatively polarized facet (001) are active sites for water oxidation into O2, while the defect-free sites prefer H2O2 as the oxidation product. The apparent quantum yield at 435 nm for photocatalytic overall water splitting with PbTiO3/Rh/Cr2O3 is determined to be 0.025%, which is remarkable for single undoped metal oxide-based photocatalysts. Furthermore, the strong correlation among oxygen vacancies, polarization strength, and photocatalytic activity is properly reflected by charge separation conditions in the single-domain PbTiO3. This work clarifies the crucial role of oxygen vacancies during photocatalytic reactions of PbTiO3, which provides a useful guide to the design of efficient ferroelectric photocatalysts and their water redox reaction pathways.

Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible-Light Photocatalytic Water Splitting.

The strong band-to-band absorption of photocatalysts spanning the whole visible-light region (400-700 nm) is critically important for solar-driven photocatalysis. Although it has been actively and widely used as a photocatalyst for various reactions in the past four decades, TiO2 has a very poor ability to capture the whole spectrum of visible light. In this work, by controlling the spatially homogeneous distribution of boron and nitrogen heteroatoms in anatase TiO2 microspheres with a predominance of high-energy {001} facets, a strong visible-light absorption spectrum with a sharp edge beyond 680 nm has been achieved. The red TiO2 obtained with homogeneous doping of boron and nitrogen shows no increase in defects like Ti3+ that are commonly observed in doped TiO2 . More importantly, it has the ability to induce photocatalytic water oxidation to produce oxygen under the irradiation of visible light beyond 550 nm and also the photocatalytic reduction of water to produce hydrogen under visible light. These results demonstrate the great promise of using red TiO2 for visible-light photocatalytic water splitting and also reveal an attractive strategy for realizing the wide-spectrum visible-light absorption of wide-band-gap oxide photocatalysts.

Near-Neighbor Electron Orbital Coupling Effect of Single-Atomic-Layer Au Cluster Intercalated Bilayer 2H-TaS2 for Surface Enhanced Raman Scattering Sensing.

It is difficult to perfectly analyze the enhancement mechanism of two-dimensional (2D) materials and their combination with precious metals as surface enhanced Raman scattering (SERS) substrates using chemical enhancement mechanisms. Here, we propose a new mentality based on the coupling effect of neighboring electron orbitals to elucidate the electromagnetic field enhancement mechanism of single-atom-layer Au clusters embedded in double-layer 2H-TaS2 for SRES sensing. The insertion of Au atoms into the 2H-TaS2 interlayer was verified by XRD, AFM, and HRTEM, and a SERS signal enhancement of 2 orders of magnitude was obtained compared to the pure 2H-TaS2. XPS and micro-UV/vis-NIR spectra indicate that the outer electrons of neighboring Au and 2H-TaS2 overlap and migrate from Au to 2H-TaS2. First-principles calculations suggest strong electronic coupling between Au and 2H-TaS2. This study offers insights into SERS enhancement in nonprecious metal compounds and guides the development of new SERS substrates.

Iron-doped NiS2 microcrystals with exposed {001} facets for electrocatalytic water oxidation.

Developing high-performance electrocatalysts with favorable phase, surface structure and electronic structure for oxygen evolution reaction (OER) is crucial for efficient electrocatalytic water splitting. With Fe3+ ions as both dopant and morphology-controlling agent, Fe-doped NiS2 microcrystals with the exposed chemically stable {001} facets were synthesized hydrothermally for electrocatalytic OER. The initial electrocatalytic OER activation processes led to the conversion of iron-rich surface layers of the NiS2 microcrystals into Fe-doped Ni (oxy)hydroxide as the shell and the residual inner of the NiS2 microcrystals as the core. Such Fe-doped NiS2 microcrystals with the derived core/shell structure only required a small OER overpotential of 277 mV to reach an electrochemical current density of 10 mA/cm2, and showed a good stability in a more than 20 h duration test almost without overpotential increase.

Constructing porous carbon nitride nanosheets for efficient visible-light-responsive photocatalytic hydrogen evolution.

The photocatalytic performance of polymeric carbon nitride (CN) is mainly restricted by the poor mass charge separation efficiency and poor light absorption due to its polymeric nature. The conventional strategies to address these problems involved constructing a nanosheets structure would result in a blue shifted light absorption and increased exciton binding energy. Here, with combination of ammonia etching and selectively hydrogen-bond breaking, holey carbon nitride nanosheets (hCNNS) were constructed, thus widening the light absorption range, and spontaneously shortening the migration distance of electrons and holes in the lateral and vertical directions, respectively. Further analysis also found out the reserved atomic structure order endowed hCNNS with the relatively high redox potential. When irradiated with visible light (λ > 420 nm) and loaded with 3 wt% Pt as the cocatalyst, the hydrogen evolution rate of hCNNS was about 40 times higher than the bulk CN, and the apparent quantum yield (AQY) of hCNNS is 1.47% at 435 ± 15 nm. We expect this research can provide a new sight for achieving highly efficient solar utilization of CN-based photocatalysts.

Perovskite Oxynitride Solid Solutions of LaTaON2-CaTaO2N with Greatly Enhanced Photogenerated Charge Separation for Solar-Driven Overall Water Splitting.

The search for solar-driven photocatalysts for overall water splitting has been actively pursued. Although metal oxynitrides with metal d0/d10-closed shell configuration are very promising candidates in terms of their visible light absorption, they usually suffer from serious photo-generated charge recombination and thus, little photoactivity. Here, by forming their solid solutions of LaTaON2 and CaTaO2N, which are traditionally considered to be inorganic yellow-red pigments but have poor photocatalytic activity, a class of promising solar-driven photocatalysts La1- x Ca x TaO1+yN2- y (0 ≤ x, y ≤ 1) are explored. In particular, the optimal photocatalyst with x = 0.9 has the ability of realizing overall water splitting with stoichiometric H2/O2 ratio under the illumination of both AM1.5 simulated solar light and visible light. The modulated key parameters including band structure, Ta bonding environment, defects concentration, and band edge alignments revealed in La0.1Ca0.9TaO1+ y N2- y have substantially promoted the separation of photogenerated charge carriers with sufficient energetics for water oxidation and reduction reactions. The results obtained in this study provide an important candidate for designing efficient solar-driven photocatalysts for overall water splitting.

Subnanometer high-entropy alloy nanowires enable remarkable hydrogen oxidation catalysis.

High-entropy alloys (HEAs) with unique physicochemical properties have attracted tremendous attention in many fields, yet the precise control on dimension and morphology at atomic level remains formidable challenges. Herein, we synthesize unique PtRuNiCoFeMo HEA subnanometer nanowires (SNWs) for alkaline hydrogen oxidation reaction (HOR). The mass and specific activities of HEA SNWs/C reach 6.75 A mgPt+Ru-1 and 8.96 mA cm-2, respectively, which are 2.8/2.6, 4.1/2.4, and 19.8/18.7 times higher than those of HEA NPs/C, commercial PtRu/C and Pt/C, respectively. It can even display enhanced resistance to CO poisoning during HOR in the presence of 1000 ppm CO. Density functional theory calculations reveal that the strong interactions between different metal sites in HEA SNWs can greatly regulate the binding strength of proton and hydroxyl, and therefore enhances the HOR activity. This work not only provides a viable synthetic route for the fabrication of Pt-based HEA subnano/nano materials, but also promotes the fundamental researches on catalysis and beyond.

Gradient Sn-Doped Heteroepitaxial Film of Faceted Rutile TiO2 as an Electron Selective Layer for Efficient Perovskite Solar Cells.

The high-efficiency photocarrier collection at the interfaces plays an important role in improving the performance of perovskite solar cells (PSCs) because the photocarrier effective diffusion lengths in the lead halide perovskite absorbers usually surpass the incident depths of light. Developing the electron selective layer (ESL) that has good interfaces with photoactive perovskite and current collector layer-like fluorine-doped tin oxide (FTO) is actively pursued. Here, an unusual dense film of faceted rutile TiO2 single crystals with a gradient of the Sn4+ dopant grown heteroepitaxially on the FTO layer is obtained by a hydrothermal route and subsequent thermal treatment. Owing to the global features including low concentration of defects, atomically smooth coherent interface with FTO, and gradient doping-induced built-in electric field to promote the collection of photoelectrons in it, an optimal PSC with such a film as the ESL exhibits an efficiency of 17.2% with an open-circuit voltage of 1.1 V and fill factor of 76.1%, which are among the highest values of the PSCs with rutile TiO2 films as ESLs.

Insights into the role of nanoalloy surface compositions toward catalytic acetone hydrogenation.

A significant composition-dependent catalysis behavior was observed in catalytic acetone hydrogenation. Carbon supported PtRu alloy nanoparticles (NPs) with optimal surface composition achieved ultra-efficient and highly selective production of isopropyl alcohol.

Noninvasively Modifying Band Structures of Wide-Bandgap Metal Oxides to Boost Photocatalytic Activity.

Although doping with appropriate heteroatoms is a powerful way of increasing visible light absorption of wide-bandgap metal oxide photocatalysts, the incorporation of heteroatoms into the photocatalysts usually leads to the increase of deleterious recombination centers of photogenerated charge carriers. Here, a conceptual strategy of increasing visible light absorption without causing additional recombination centers by constructing an ultrathin insulating heterolayer of amorphous boron oxynitride on wide-bandgap photocatalysts is shown. The nature of this strategy is that the active composition nitrogen in the heterolayer can noninvasively modify the electronic structure of metal oxides for visible light absorption through the interface contact between the heterolayer and metal oxides. The photocatalysts developed show significant improvements in photocatalytic activity under both UV-vis and visible light irradiation compared to the doped counterparts by conventional doping process. These results may provide opportunities for flexibly tailoring the electronic structure of metal oxides.

A Langmuir and AFM study on interfacial behavior of binary monolayer of hexadecanol/DPPE at the air-water interface.

Hexadecanol is chemically stable and can be used as an effective addition in synthetic clinical lung surfactant preparations to improve their spreading properties. In this work, a detailed thermodynamic and structural characterization of a simple model system, which based on a hexadecanol-phospholipid mixture is reported. Langmuir monolayers of binary mixtures of hexadecanol/1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) have been studied with thermodynamic parameters and monolayer structure. The extent of the thermodynamic parameters has been evaluated by the direct related parameters, such as mean molecular area, percent of condensation, surface excess Gibbs free energies, isothermal compressibility, interaction energy parameter, activity coefficient and two-dimensional phase diagram. Monolayer film structure has been characterized by atomic force microscopy (AFM) technique. Combining thermodynamic and AFM data indicate that there exist repulsive and attractive interactions between the two film forming molecules and the binary films behave as non-ideal mixtures, which can be portrayed by the mole fraction of hexadecanol. At low mole fraction of hexadecanol, the monolayer is phase-separated and the interactions between hexadecanol and DPPE is more repulsive; while the content of hexadecanol up to 0.6, the monolayer becomes miscible and stable, the interaction between different molecules is more attractive. The addition of hexadecanol in the DPPE monolayer clearly affects the lateral organization of membranes and improves its surface tension kinetics. The results discussed in this context will be expected to be potential contribution for exogenous lung surfactant researches.