RESUMEN
Controlling crystal size and shape of zeolitic materials is an effective way to promote their mass transport and catalytic properties. Herein, we report a single step, Na+ - and porogen- free crystallization of MFI hierarchical architecture made up of aligned nanocrystals with reduced b-axis thickness (5-23â nm) and adjustable Si/Al ratios between 35 to 120, employing the commonly used tetrapropylammonium hydroxide (TPAOH) and tetrabutylammonium hydroxide (TBAOH) as structure-directing agents (SDAs). Homogeneous nucleation driven by both SDAs and subsequent SDA-exchange induced dissolution-recrystallization are responsible for the formation of such structure. The enhanced textural and diffusion properties account for a notable exaggeration of propene selectivity and catalyst lifetime in dimethyl ether-to-olefins (DTO) conversion. This protocol is extendable to the rational synthesis of other hierarchical zeolites through crystallization process control.
RESUMEN
Oxygen evolution from water poses a significant challenge in solar fuel production because it requires an efficient catalyst to bridge the one-electron photon capture process with the four-electron oxygen evolution reaction (OER). Here, a new strategy was developed to synthesize nonsupported ultrasmall cobalt oxide nanocubanes through an in situ phase transformation mechanism using a layered Co(OH)(OCH3) precursor. Under sonication, the precursor was exfoliated and transformed into cobalt oxide nanocubanes in the presence of NaHCO3-Na2SiF6 buffer solution. The resulting cobalt catalyst with an average particle size less than 2 nm exhibited a turnover frequency of 0.023 per second per cobalt in photocatalytic water oxidation. X-ray absorption results suggested a unique nanocubane structure, where 13 cobalt atoms fully coordinated with oxygen in an octahedral arrangement to form 8 Co4O4 cubanes, which may be responsible for the exceptionally high OER activity.
Asunto(s)
Cobalto/química , Nanoestructuras/química , Óxidos/química , Oxígeno/química , Agua/química , Catálisis , Nanoestructuras/ultraestructura , Nanotecnología , Oxidación-Reducción , Tamaño de la PartículaRESUMEN
The crystallization of zeolite beta in a dry gel system is found to follow the orientated attachment growth route, escorted with a temporal morphology change from bulky gel, through aggregation of the particulate to large zeolitic crystals. Modification of the precrystallized gel with organosilanes can be used to tune the morphology of the ultimate beta. When hexadecyltrimethoxysilane (HTS) is employed to modify precrystallized gel, a resumed secondary growth produces a hybrid mesocrystal of agglomerated nanozeolites. Combustive removal of organics leads to the formation of hierarchically porous zeolite beta of 100 to 160â nm, composed of nanocrystal building units ranging from 20 to 40â nm, with a noticeable micropore volume of 0.19â mL g(-1) and a meso/macropore size between 5 and 80â nm. Conversely, when 1,8-bis(triethoxysilyl)octane (BTO) is utilized to modify the same precrystallized gel, assemblages of discrete beta nanozeolite of around 35â nm are generated. These assemblages construct a hierarchical zeolite beta with a micropore volume of 0.20â mL g(-1) and auxiliary pores ranging from 5 to 100â nm. Both organosilanes bring about well-connected hierarchical pore networks. HTS has little effect on the Brønsted/Lewis acidity, whereas BTO causes a substantial reduction of strong Brønsted acid sites. The hierarchical beta zeolite-supported Pt catalyst exhibits improved catalytic performance for the hydroisomerization of n-heptane.
RESUMEN
A large-sample-volume constant-flow magic angle sample spinning (CF-MAS) NMR probe is reported for in situ studies of the reaction dynamics, stable intermediates/transition states, and mechanisms of catalytic reactions. In our approach, the reactants are introduced into the catalyst bed using a fixed tube at one end of the MAS rotor while a second fixed tube, linked to a vacuum pump, is attached at the other end of the rotor. The pressure difference between both ends of the catalyst bed inside the sample cell space forces the reactants flowing through the catalyst bed, which improves the diffusion of the reactants and products. This design allows the use of a large sample volume for enhanced sensitivity and thus permitting in situ(13)C CF-MAS studies at natural abundance. As an example of application, we show that reactants, products and reaction transition states associated with the 2-butanol dehydration reaction over a mesoporous silicalite supported heteropoly acid catalyst (HPA/meso-silicalite-1) can all be detected in a single (13)C CF-MAS NMR spectrum at natural abundance. Coke products can also be detected at natural (13)C abundance and under the stopped flow condition. Furthermore, (1)H CF-MAS NMR is used to identify the surface functional groups of HPA/meso-silicalite-1 under the condition of in situ drying. We also show that the reaction dynamics of 2-butanol dehydration using HPA/meso-silicalite-1 as a catalyst can be explored using (1)H CF-MAS NMR.
RESUMEN
We report the design and synthesis of nanosized Zn(x)Zr(y)O(z) mixed oxides for direct and high-yield conversion of bio-ethanol to isobutene (~83%). ZnO is addded to ZrO(2) to selectively passivate zirconia's strong Lewis acidic sites and weaken Brönsted acidic sites, while simultaneously introducing basicity. As a result, the undesired reactions of bio-ethanol dehydration and acetone polymerization/coking are suppressed. Instead, a surface basic site-catalyzed ethanol dehydrogenation to acetaldehyde, acetaldehyde to acetone conversion via a complex pathway including aldol-condensation/dehydrogenation, and a Brönsted acidic site-catalyzed acetone-to-isobutene reaction pathway dominates on the nanosized Zn(x)Zr(y)O(z) mixed oxide catalyst, leading to a highly selective process for direct conversion of bio-ethanol to isobutene.
Asunto(s)
Alquenos/química , Etanol/química , Nanoestructuras/química , Óxido de Zinc/química , Circonio/química , CatálisisRESUMEN
Engineered nanoporous particles have become an important class of nanostructured materials that have been increasingly applied in energy, biomedical, and environmental researches and industries. The internal pore surfaces in the particles can be chemically functionalized for environmental applications to sequestrate metals and radionuclide contaminants from groundwater. The fate and transport of the nanoporous particles in subsurface environments, however, have not been studied. Here we present a scanning optical fiber fluorescence profiler that can be used to in situ monitor the transport of fluorescent particles in column systems. Engineered nanoporous silicate particles (ENSPs) that were covalently bounded with fluorescence-emitting, and uranium-chelating ligands in the intraparticle pore domains were synthesized and used as an example to investigate nanoporous particle transport and to demonstrate the application of the developed in situ measurement profiler. The profiler detected an "irreversible" or slowly detached fraction of ENSPs in a sand collector even under thermodynamically unfavorable conditions for particle attachment. Further, the in situ measurement system detected the spatial variability of ENSPs transport that deviated from one-dimensional, homogeneous assumption, which is typically used to model particle transport in column systems. Generally, however, both measured and model-calculated results indicated that the transport of ENSPs was consistent with that of nonporous colloidal particles subjected to coupled reversible attachment/detachment and straining processes. The developed system can also be applied to detect other fluorescent nanostructured or colloidal particles in porous media.
Asunto(s)
Nanoporos/ultraestructura , Cinética , Modelos Químicos , Tamaño de la Partícula , Porosidad , Silicatos/análisis , Silicatos/químicaRESUMEN
High pressure reforming of methane is critical for process economics, but imposes increased risk of catalyst coke deposition. Herein, a coke- and sintering-resistant Ir-Ni alloy catalyst is presented, which is durable in methane bi-reforming at 850 °C and 20 bars for up to 434 h.
RESUMEN
Dispersion and quantitative characterization of supported catalysts is a grand challenge in catalytic science. In this paper, heteropoly acid H(3)PW(12)O(40) (HPA) is dispersed on mesoporous zeolite silicalite-1 derived from hydrothermal synthesis using carbon black nanoparticle templates, and the catalytic activity is studied for 1-butene isomerization. The HPAs supported on conventional zeolite and on mesoporous zeolite exhibit very different activities and thus provide good model systems to investigate the structure dependence of the catalytic properties. The HPA on mesoporous silicalite-1 shows enhanced catalytic activity for 1-butene isomerization, while HPA on conventional silicalite-1 exhibits low activity. To elucidate the structural difference, supported HPA catalysts are characterized using a variety of techniques, including (31)P magic angle spinning nuclear magnetic resonance, and are shown to contain a range of species on both mesoporous and conventional zeolites. However, contrary to studies reported in the literature, conventional NMR techniques and chemical shifts alone do not provide sufficient information to distinguish the dispersed and aggregated surface species. The dispersed phase and the nondispersed phase can only be unambiguously and quantitatively characterized using spin-lattice relaxation NMR techniques. The HPA supported on mesoporous zeolite contains a fast relaxation component related to the dispersed catalyst, giving a much higher activity, while the HPA supported on conventional zeolite has essentially only the slow relaxation component with very low activity. The results obtained from this work demonstrate that the combination of spinning sideband fitting and spin-lattice relaxation techniques can provide detailed structural information on not only the Keggin structure for HPA but also the degree of dispersion on the support.
RESUMEN
Phenyltrimethoxysilane as a Si source can significantly slow down the crystallization process for SAPO-34 synthesis, leading to the formation of agglomerated nanocrystals (<100 nm). The obtained nanosized SAPO-34 shows enhanced catalytic stability in methanol-to-olefin conversion under industrially relevant conditions.
RESUMEN
Three-dimensional porous chromium oxide single crystals have been prepared by aminosilylation of the surface silanols of the template, SBA-15, anchoring of dichromic acid to the grafted amine groups, thermal decomposition of inorganic and organic compounds, and removal of the silica framework with HF.
RESUMEN
Highly dispersed vanadia species on SBA-15 mesoporous silica have been found to exhibit a highly efficient catalytic performance for the oxidative dehydrogenation (ODH) of propane to light olefins (propene + ethylene).
RESUMEN
The tetrairon(III)-substituted polytungstates [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV)) were immobilized on (3-aminopropyl)triethoxysilane-modified SBA-15 and showed an excellent catalytic performance for solvent-free aerobic oxidation of long-chain n-alkanes using air as the oxidant under ambient conditions through a classical free-radical chain autoxidation mechanism.