RESUMEN
Herein, we describe a gold-catalyzed cascade cyclization of Boc-protected benzylamines bearing two tethered alkyne moieties in a domino reaction initiated by a 6-endo-dig cyclization. The reaction was screened intensively, and the scope was explored, resulting in nine new Boc-protected dihydrobenzo[c]phenanthridines with yields of up to 98 %; even a π-extension and two bidirectional approaches were successful. Furthermore, thermal cleavage of the Boc group and subsequent oxidation gave substituted benzo[c]phenanthridines in up to quantitative yields. Two bidirectional approaches under the optimized conditions were successful, and the resulting π-extended molecules were tested as organic semiconductors in organic thin-film transistors.
Asunto(s)
Alquinos , Fenantridinas , Catálisis , Ciclización , Estructura MolecularRESUMEN
A new synthetic route to tetraindenopyrene (TIP)-a bowl-shaped cut-out structure of C70 -is reported. The key step in this approach is a fourfold palladium-catalyzed C-H activation that increases the yield more than 50 times in comparison to the approach originally described by Scott and co-workers. Besides examination of its optoelectronic properties and study of its aggregation in solution, TIP was also re-investigated by dispersion-corrected DFT methods, which showed that dispersion interactions significantly increase the bowl-to-bowl inversion barrier. Furthermore, TIP was used as a semiconductor in p-channel thin-film transistors (TFTs).
RESUMEN
A new synthesis of tetraazaperopyrenes (TAPPs) starting from a halogenated perylene derivative 3,4,9,10- tetrabromo-1,6,7,12-tetrachloroperylene (1) gave access to bay-substituted TAPPs for the first time. Selective lithiation of the bromine-positions and subsequent addition of tosyl azide led to the formation of the tetraazidotetrachloroperylene (2), which was subsequently reduced by addition of sodium borohydride to the corresponding tetraaminotetrachloroperylene (3). Oxidation to its semiquinoidal form 4 and subsequent cyclization with acid chlorides gave rise to a series of bay-chlorinated TAPPs. Whereas the aromatic core of the previously studied ortho-substituted TAPPs was found to be planar, the steric pressure of the two chlorine substituents on each side leads to the twist of the peropyrene core of approximately 30â degrees, a structural feature also observed in other bay-substituted perylene derivatives. An experimental and computational analysis reveals that introducing chloride substituents at these positions leads to slightly increased electron affinities (EA) enabling the selective generation and characterization of the reduced mono-anionic radicals and closed shell di-anionic species. These anions were isolated and characterized by UV/Vis spectroscopy and EPR or NMR, respectively. Processing of the bay-chlorinated TAPPs in n-channel organic TFTs revealed electron mobilities of 0.001 to 0.003â cm2 V-1 s-1 . These reduced electron mobilities compared to the ortho-halogenated TAPPs are thought to be rooted in the less densely packed solid-state structures.
RESUMEN
Tetraazaperopyrenes (TAPPs) have been functionalized with thiophene and terthiophene units of different architecture resulting in a variety of organic donor-acceptor (D-A) compounds. The influence of the connection of the thiophenes to the TAPP core on their structural, photophysical and electrochemical properties has been studied in detail by a combination of X-ray crystallography, UV-vis and fluorescence spectroscopy as well as cyclic voltammetry, which allowed the establishment of structure-property relationships. The HOMO-LUMO gap is significantly decreased upon substitution of the TAPP core with electron-donating thiophene units, the extent of which is strongly influenced by the orientation of the thiophene units. The latter also crucially directs the molecular packing in the solid. Linkage at the α-position allows both inter- and intramolecular N···S interaction, whereas linkage in the ß-position prevents intramolecular N···S interaction, resulting in a less pronounced conjugation of the TAPP core and the thiophene units. The new TAPP derivatives were processed as semiconductors in organic thin-film transistors (TFTs) that show ambipolar behavior. The insight into band gap and structure engineering may open up new possibilities to tailor the electronic properties of TAPP-based materials for certain desired applications.
RESUMEN
Fused, extended π-systems such as larger acenes and heteroacenes are interesting compounds for organic thin-film transistors (TFTs). The larger the number of linearly cata-fused rings, the lower the stability of the acenes. By peri-fusion of additional rings, the stabilities can significantly be increased. Here we present a facile approach to use a diborylated dihydroanthracene as precursor to get diareno-fused perylenes in just two steps in high yields. The compounds show pronounced packing in the crystalline states by π-stacking. Promising candidates have been used to fabricate p-channel TFTs by vacuum sublimation showing field-effect mobilities up to 0.12â cm2 V-1 s-1 .
RESUMEN
A detailed study on the effects of core halogenation of tetraazaperopyrene (TAPP) derivatives is presented. Its impact on the solid structure, as well as the photophysical and electrochemical properties, has been probed by the means of X-ray crystallography, UV/Vis and fluorescence spectroscopy, high-resolution electron energy loss spectroscopy (HREELS), cyclic voltammetry (CV), and DFT modeling. The aim was to assess the potential of this approach as a construction principle for organic electron-conducting materials of the type studied in this work. Although halogenation leads to a stabilization of the LUMOs compared to the unsubstituted parent compound, the nature of the halide barely affects the LUMO energy while strongly influencing the HOMO energies. In terms of band-gap engineering, it was demonstrated that the HOMO-LUMO gap is decreased by substitution of the TAPP core with halides, the effect being found to be most pronounced for the iodinated derivative. The performance of the recently reported core-fluorinated and core-iodinated TAPP derivatives in organic thin-film transistors (TFTs) was investigated on both a glass substrate, as well as on a flexible plastic substrate (PEN). Field-effect mobilities of up to 0.17â cm(2) Vs(-1) and on/off current ratio of >10(6) were established.
RESUMEN
The prospect of using low-temperature processable organic semiconductors to implement transistors, circuits, displays and sensors on arbitrary substrates, such as glass or plastics, offers enormous potential for a wide range of electronic products. Of particular interest are portable devices that can be powered by small batteries or by near-field radio-frequency coupling. The main problem with existing approaches is the large power consumption of conventional organic circuits, which makes battery-powered applications problematic, if not impossible. Here we demonstrate an organic circuit with very low power consumption that uses a self-assembled monolayer gate dielectric and two different air-stable molecular semiconductors (pentacene and hexadecafluorocopperphthalocyanine, F16CuPc). The monolayer dielectric is grown on patterned metal gates at room temperature and is optimized to provide a large gate capacitance and low gate leakage currents. By combining low-voltage p-channel and n-channel organic thin-film transistors in a complementary circuit design, the static currents are reduced to below 100 pA per logic gate. We have fabricated complementary inverters, NAND gates, and ring oscillators that operate with supply voltages between 1.5 and 3 V and have a static power consumption of less than 1 nW per logic gate. These organic circuits are thus well suited for battery-powered systems such as portable display devices and large-surface sensor networks as well as for radio-frequency identification tags with extended operating range.
RESUMEN
One of the circuit topologies for the implementation of unipolar integrated circuits (circuits that use either p-channel or n-channel transistors, but not both) is the zero-VGS architecture. Zero-VGS circuits often provide excellent static performance (large small-signal gain and large noise margins), but they suffer from the large signal delay imposed by the load transistor. To address this limitation, we have used electron-beam lithography to fabricate zero-VGS circuits based on organic transistors with channel lengths as small as 120 nm on flexible polymeric substrates. For a supply voltage of 3 V, these circuits have characteristic signal-delay time constants of 14 ns for the low-to-high transition and 560 ns for the high-to-low transition of the circuit's output voltage. These signal delays represent the best dynamic performance reported to date for organic transistor-based zero-VGS circuits. The signal-delay time constant of 14 ns is also the smallest signal delay reported to date for flexible organic transistors.
RESUMEN
Here we report hexathienocoronenes (HTCs), fully thiophene-annelated coronenes in which six double bonds in the periphery are thieno-fused. The derivatives tetrasubstituted with hexyl and dodecyl chains show a phase formation that strongly depends on the chain length. HTCs are remarkably stronger donors than the known thiophene-annelated coronenes but do not readily assemble into well-ordered films when deposited from the vapor phase. Thus, thin-film transistors fabricated by vacuum deposition have only modest field-effect mobilities of 0.002 cm(2) V(-1) s(-1).
Asunto(s)
Compuestos Policíclicos/síntesis química , Compuestos de Sulfhidrilo/síntesis química , Modelos Moleculares , Estructura Molecular , Compuestos Policíclicos/química , Compuestos de Sulfhidrilo/químicaRESUMEN
Bottom-gate, top-contact organic thin-film transistors (TFTs) with excellent static characteristics (on/off ratio: 10(7) ; intrinsic mobility: 3 cm(2) (V s)(-1) ) and fast unipolar ring oscillators (signal delay as short as 230 ns per stage) are fabricated. The significant contribution of the transfer length to the relation between channel length, contact length, contact resistance, effective mobility, and cutoff frequency of the TFTs is theoretically and experimentally analyzed.
RESUMEN
A range of 2,9-perfluoroalkyl-substituted tetraazaperopyrene (TAPP) derivatives (1-5) was synthesised by reacting 4,9-diamino-3,10-perylenequinone diimine (DPDI) with the corresponding carboxylic acid chloride or anhydride in the presence of a base. The reaction of compounds 1-4 with dichloroisocyanuric acid (DIC) in concentrated sulphuric acid resulted in the fourfold substitution of the tetraazaperopyrene core, yielding the 2,9-bisperfluoroalkyl-4,7,11,14-tetrachloro-1,3,8,10-tetraazaperopyrenes 6-9, respectively. The optical and electrochemical data demonstrate the drastic influence of the core substitution on the properties. All compounds are highly luminescent (fluorescence quantum yields of up to Φ=0.8). The LUMO energies of the tetrachlorinated TAPP derivatives (determined by cyclic voltammetry and computed by DFT calulations) were found to be below -4â eV. In the course of this work the performance of TAPP derivatives in organic thin-film transistors (TFTs) was investigated, and their n-channel characteristics with field-effect mobilities of up to 0.14â cm(2) V(-1) s(-1) and an on/off current ratio of >10(6) were confirmed. Long-term stabilities of 3-4 months under ambient conditions of the devices were established. Complementary inverters and ring oscillators with n-channel TFTs based on compound 8 and p-channel TFTs based on dinaphtho-[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) were fabricated on a glass substrate.
RESUMEN
A series of new tetraazapyrene (TAPy) derivatives has been synthesized by reducing 1,4,5,8-tetranitronaphthalene to its corresponding tin salt (I) and reacting it with perfluorinated alkyl or aryl anhydrides. The resulting 2,7-disubstituted TAPy molecules and the known parent compound 1,3,6,8-tetraazapyrene (II) have been further derivatized by core chlorination and bromination. The brominated compounds served as starting materials for Suzuki cross-coupling reactions with electron-poor arylboronic acids. Single-crystal X-ray analyses established polymorphism for some TAPy compounds. The ground-state geometries of all new TAPy derivatives were modeled with DFT methods [B3PW91/6-31 g(d,p) and B3PW91/6-311+g(d,p)], especially focusing on the energies of the lowest unoccupied molecular orbital (LUMO) and the electron affinities (EA) of the molecules. The results of the calculations were confirmed experimentally by cyclic voltammetry to evaluate the substitution effects at the 2 and 7 position and the core positions, respectively, and gave LUMO energy levels that range from -3.57 to -4.14 eV. Fabrication of organic field-effect transistors (OFETs) with several of these tetraazapyrenes established their potential as organic n-type semiconductors.
Asunto(s)
Pirenos/química , Pirenos/síntesis química , Cristalografía por Rayos X , Modelos Moleculares , Estructura Molecular , Oxidación-Reducción , Teoría CuánticaRESUMEN
A novel approach for the fabrication of transistors and circuits based on individual single-crystalline ZnO nanowires synthesized by a low-temperature hydrothermal method is reported. The gate dielectric of these transistors is a self-assembled monolayer that has a thickness of 2 nm and efficiently isolates the ZnO nanowire from the top-gate electrodes. Inverters fabricated on a single ZnO nanowire operate with frequencies up to 1 MHz. Compared with metal-semiconductor field-effect transistors, in which the isolation of the gate electrode from the carrier channel relies solely on the depletion layer in the semiconductor, the self-assembled monolayer dielectric leads to a reduction of the gate current by more than 3 orders of magnitude.
RESUMEN
In this work, we combine self-assembly and top-down methods to create hybrid junctions consisting of single organic molecular monolayers sandwiched between metal and/or single-crystalline semiconductor nanomembrane based electrodes. The fabrication process is fully integrative and produces a yield loss of less than 5% on-chip. The nanomembrane-based electrodes guarantee a soft yet robust contact to the molecules where the presence of pinholes and other defects becomes almost irrelevant. We also pioneer the fabrication and characterization of semiconductor/molecule/semiconductor tunneling heterojunctions which exhibit a double transition from direct tunneling to field emission and back to direct tunneling, a phenomenon which has not been reported previously.
Asunto(s)
Membranas Artificiales , Nanotecnología/métodos , Cristalización , Electroquímica/métodos , Electrodos , Electrónica , Metales/química , Microscopía Electrónica de Rastreo/métodos , Nanoestructuras/química , Compuestos Orgánicos/química , Semiconductores , Propiedades de SuperficieRESUMEN
Direct-write electron-beam lithography has been used to fabricate low-voltage p-channel and n-channel organic thin-film transistors with channel lengths as small as 200 nm and gate-to-contact overlaps as small as 100 nm on glass and on flexible transparent polymeric substrates. The p-channel transistors have on/off current ratios as large as 4 × 109 and subthreshold swings as small as 70 mV/decade, and the n-channel transistors have on/off ratios up to 108 and subthreshold swings as low as 80 mV/decade. These are the largest on/off current ratios reported to date for nanoscale organic transistors. Inverters based on two p-channel transistors with a channel length of 200 nm and gate-to-contact overlaps of 100 nm display characteristic switching-delay time constants between 80 and 40 ns at supply voltages between 1 and 2 V, corresponding to a supply voltage-normalized frequency of about 6 MHz/V. This is the highest voltage-normalized dynamic performance reported to date for organic transistors fabricated by maskless lithography.
RESUMEN
A method is proposed to estimate the lateral resolution of surface potential profile measurements using Kelvin probe force microscopy (KPFM) on operating electronic devices. De-embedding the measured profile from the system response is required for various applications, such as contact characterization of thin-film transistors, or local longitudinal electric field measurements. A method is developed based on the measurement of the electric potential profile of two metallic electrodes separated by a nano-gap, providing a quasi-planar configuration. The electrodes are independently biased so as to produce an abrupt and well-controlled potential step. This calibration sample is used to measure the system impulse response in various configurations. Due to the application constrains, the KPFM method employed here is based on a dual-pass mode, demonstrated to provide reliable measurements on operating electronic devices. The method is applied to two types of conductive AFM probes. Measurements are performed at different tip-to-sample heights allowing the determination of the lateral resolution of the double-pass method. Detailed description of the measurements and resolution results are given for the present KPFM configuration. The system resolution measurement technique can be extended to other KPFM modes and can be used to monitor the degradation of the tip quality during long measurement campaigns. Finally, the method is applied to the characterization of thin-film transistors, and the effects of contact edge sharpness on the device behavior is discussed. The longitudinal electric field responsible for charge injection at the source-contact edge is successfully estimated and compared for organic thin-film transistors fabricated by stencil lithography or electron-beam lithography.
RESUMEN
Flexible electronic circuits are an essential prerequisite for the development of rollable displays, conformable sensors, biodegradable electronics and other applications with unconventional form factors. The smallest radius into which a circuit can be bent is typically several millimetres, limited by strain-induced damage to the active circuit elements. Bending-induced damage can be avoided by placing the circuit elements on rigid islands connected by stretchable wires, but the presence of rigid areas within the substrate plane limits the bending radius. Here we demonstrate organic transistors and complementary circuits that continue to operate without degradation while being folded into a radius of 100 µm. This enormous flexibility and bending stability is enabled by a very thin plastic substrate (12.5 µm), an atomically smooth planarization coating and a hybrid encapsulation stack that places the transistors in the neutral strain position. We demonstrate a potential application as a catheter with a sheet of transistors and sensors wrapped around it that enables the spatially resolved measurement of physical or chemical properties inside long, narrow tubes.
RESUMEN
A major obstacle to the development of organic transistors for large-area sensor, display, and circuit applications is the fundamental compromise between manufacturing efficiency, transistor performance, and power consumption. In the past, improving the manufacturing efficiency through the use of printing techniques has inevitably resulted in significantly lower performance and increased power consumption, while attempts to improve performance or reduce power have led to higher process temperatures and increased manufacturing cost. Here, we lift this fundamental limitation by demonstrating subfemtoliter inkjet printing to define metal contacts with single-micrometer resolution on the surface of high-mobility organic semiconductors to create high-performance p-channel and n-channel transistors and low-power complementary circuits. The transistors employ an ultrathin low-temperature gate dielectric based on a self-assembled monolayer that allows transistors and circuits on rigid and flexible substrates to operate with very low voltages.
RESUMEN
The intrinsic doping level of graphene prepared by mechanical exfoliation and standard lithography procedures on thermally oxidized silicon varies significantly and seems to depend strongly on processing details and the substrate morphology. Moreover, transport properties of such graphene devices suffer from hysteretic behavior under ambient conditions. The hysteresis presumably originates from dipolar adsorbates on the substrate or graphene surface. Here, we demonstrate that it is possible to reliably obtain low intrinsic doping levels and to strongly suppress hysteretic behavior even in ambient air by depositing graphene on top of a thin, hydrophobic self-assembled layer of hexamethyldisilazane (HMDS). The HMDS serves as a reproducible template that prevents the adsorption of dipolar substances. It may also screen the influence of substrate deficiencies.
RESUMEN
A critical requirement for the application of organic thin-film transistors (TFTs) in mobile or wearable applications is low-voltage operation, which can be achieved by employing ultrathin, high-capacitance gate dielectrics. One option is a hybrid dielectric composed of a thin film of aluminum oxide and a molecular self-assembled monolayer in which the aluminum oxide is formed by exposure of the surface of the aluminum gate electrode to a radio-frequency-generated oxygen plasma. This work investigates how the properties of such dielectrics are affected by the plasma power and the duration of the plasma exposure. For various combinations of plasma power and duration, the thickness and the capacitance of the dielectrics, the leakage-current density through the dielectrics, and the current-voltage characteristics of organic TFTs in which these dielectrics serve as the gate insulator have been evaluated. The influence of the plasma parameters on the surface properties of the dielectrics, the thin-film morphology of the vacuum-deposited organic-semiconductor films, and the resulting TFT characteristics has also been investigated.