First-Principles Modeling of the Absorption Spectrum of Crystal Violet in Solution: The Importance of Environmentally Driven Symmetry Breaking.

Theoretical spectroscopy plays a crucial role in understanding the properties of the materials and molecules. One of the most promising methods for computing optical spectra of chromophores embedded in complex environments from the first principles is the cumulant approach, where both (generally anharmonic) vibrational degrees of freedom and environmental interactions are explicitly accounted for. In this work, we verify the capabilities of the cumulant approach in describing the effect of complex environmental interactions on linear absorption spectra by studying Crystal Violet (CV) in different solvents. The experimental absorption spectrum of CV strongly depends on the nature of the solvent, indicating strong coupling to the condensed-phase environment. We demonstrate that these changes in absorption line shape are driven by an increased splitting between absorption bands of two low-lying excited states that is caused by a breaking of the D3 symmetry of the molecule and that in polar solvents, this symmetry breaking is mainly driven by electrostatic interactions with the condensed-phase environment rather than distortion of the structure of the molecule, in contrast with conclusions reached in a number of previous studies. Our results reveal the importance of explicitly including a counterion in the calculations in nonpolar solvents due to electrostatic interactions between CV and the ion. In polar solvents, these interactions are strongly reduced due to solvent screening effects, thus minimizing the symmetry breaking. Computed spectra in methanol are found to be in reasonable agreement with the experiment, demonstrating the strengths of the outlined approach in modeling strong environmental interactions.

Electronic Structure and CO2 Reactivity of Group IV/V/VI Tetraperoxometalates.

Tetraperoxo metal complexes are a category of dioxygen compounds with novel properties. One of their underconsidered applications is in direct air capture (DAC) reactions, whose study is of great interest in order to slow the effects of climate change. Through computational modeling, the present work considers a family of tetraperoxometalate complexes of the form [M(O2)4]x- that capture atmospheric CO2 to produce [MO(O2)2(CO3)]x- and O2. This reaction was experimentally documented with vanadium and serves as a model for analogous reactions with Group IV (x = 4; M = Ti, Zr, Hf), Group V (x = 3; M = V, Nb, Ta), and Group VI (x = 2; M = Cr, Mo, W) metal centers. Descriptors from density functional theory (DFT) calculations, including optimized structures, partial charges, and frontier orbital interactions, provide rationalization for predicted differences in reactivity. Of the nine complexes studied, [Ti(O2)4]4- and [W(O2)4]2-, respectively, represent the most and least efficient DAC reagents from their differing abilities to stabilize a bidentate peroxycarbonate (κ2-CO42-) intermediate in the proposed reaction mechanism.

Taming the third order cumulant approximation to linear optical spectroscopy.

The second order cumulant method offers a promising pathway to predicting optical properties in condensed phase systems. It allows for the computation of linear absorption spectra from excitation energy fluctuations sampled along molecular dynamics (MD) trajectories, fully accounting for vibronic effects, direct solute-solvent interactions, and environmental polarization effects. However, the second order cumulant approximation only guarantees accurate line shapes for energy gap fluctuations obeying Gaussian statistics. A third order correction has recently been derived but often yields unphysical spectra or divergent line shapes for moderately non-Gaussian fluctuations due to the neglect of higher order terms in the cumulant expansion. In this work, we develop a corrected cumulant approach, where the collective effect of neglected higher order contributions is approximately accounted for through a dampening factor applied to the third order cumulant term. We show that this dampening factor can be expressed as a function of the skewness and kurtosis of energy gap fluctuations and can be parameterized from a large set of randomly sampled model Hamiltonians for which exact spectral line shapes are known. This approach is shown to systematically remove unphysical contributions in the form of negative absorbances from cumulant spectra in both model Hamiltonians and condensed phase systems sampled from MD and dramatically improves over the second order cumulant method in describing systems exhibiting Duschinsky mode mixing effects. We successfully apply the approach to the coumarin-153 dye in toluene, obtaining excellent agreement with experiment.

Calculating absorption and fluorescence spectra for chromophores in solution with ensemble Franck-Condon methods.

Accurately modeling absorption and fluorescence spectra for molecules in solution poses a challenge due to the need to incorporate both vibronic and environmental effects, as well as the necessity of accurate excited state electronic structure calculations. Nuclear ensemble approaches capture explicit environmental effects, Franck-Condon methods capture vibronic effects, and recently introduced ensemble-Franck-Condon approaches combine the advantages of both methods. In this study, we present and analyze simulated absorption and fluorescence spectra generated with combined ensemble-Franck-Condon approaches for three chromophore-solvent systems and compare them to standard ensemble and Franck-Condon spectra, as well as to the experiment. Employing configurations obtained from ground and excited state ab initio molecular dynamics, three combined ensemble-Franck-Condon approaches are directly compared to each other to assess the accuracy and relative computational time. We find that the approach employing an average finite-temperature Franck-Condon line shape generates spectra nearly identical to the direct summation of an ensemble of Franck-Condon spectra at one-fourth of the computational cost. We analyze how the spectral simulation method, as well as the level of electronic structure theory, affects spectral line shapes and associated Stokes shifts for 7-nitrobenz-2-oxa-1,3-diazol-4-yl and Nile red in dimethyl sulfoxide and 7-methoxy coumarin-4-acetic acid in methanol. For the first time, our studies show the capability of combined ensemble-Franck-Condon methods for both absorption and fluorescence spectroscopy and provide a powerful tool for simulating linear optical spectra.

Computing linear optical spectra in the presence of nonadiabatic effects on graphics processing units using molecular dynamics and tensor-network approaches.

We compare two recently developed strategies, implemented in open source software packages, for computing linear optical spectra in condensed phase environments in the presence of nonadiabatic effects. Both approaches rely on computing excitation energy and transition dipole fluctuations along molecular dynamics (MD) trajectories, treating molecular and environmental degrees of freedom on the same footing. Spectra are then generated in two ways: in the recently developed Gaussian non-Condon theory, the linear response functions are computed in terms of independent adiabatic excited states, with non-Condon effects described through spectral densities of transition dipole fluctuations. For strongly coupled excited states, we instead parameterize a linear vibronic coupling Hamiltonian directly from spectral densities of energy fluctuations and diabatic couplings computed along the MD trajectory. The optical spectrum is then calculated using powerful, numerically exact tensor-network approaches. Both the electronic structure calculations to sample system fluctuations and the quantum dynamics simulations using tensor-network methods are carried out on graphics processing units, enabling rapid calculations on complex condensed phase systems. We assess the performance of the approaches using model systems in the presence of a conical intersection and the pyrazine molecule in different solvent environments.

Beyond the Condon limit: Condensed phase optical spectra from atomistic simulations.

While dark transitions made bright by molecular motions determine the optoelectronic properties of many materials, simulating such non-Condon effects in condensed phase spectroscopy remains a fundamental challenge. We derive a Gaussian theory to predict and analyze condensed phase optical spectra beyond the Condon limit. Our theory introduces novel quantities that encode how nuclear motions modulate the energy gap and transition dipole of electronic transitions in the form of spectral densities. By formulating the theory through a statistical framework of thermal averages and fluctuations, we circumvent the limitations of widely used microscopically harmonic theories, allowing us to tackle systems with generally anharmonic atomistic interactions and non-Condon fluctuations of arbitrary strength. We show how to calculate these spectral densities using first-principles simulations, capturing realistic molecular interactions and incorporating finite-temperature, disorder, and dynamical effects. Our theory accurately predicts the spectra of systems known to exhibit strong non-Condon effects (phenolate in various solvents) and reveals distinct mechanisms for electronic peak splitting: timescale separation of modes that tune non-Condon effects and spectral interference from correlated energy gap and transition dipole fluctuations. We further introduce analysis tools to identify how intramolecular vibrations, solute-solvent interactions, and environmental polarization effects impact dark transitions. Moreover, we prove an upper bound on the strength of cross correlated energy gap and transition dipole fluctuations, thereby elucidating a simple condition that a system must follow for our theory to accurately predict its spectrum.

Hypsochromically-shifted Emission of Metal-organic Frameworks Generated through Post-synthetic Ligand Reduction.

Luminescent materials with tunable emission are becoming increasingly desirable as we move towards needing efficient Light Emitting Diodes (LEDs) for displays. Key to developing better displays is the advancement of strategies for rationally designing emissive materials that are tunable and efficient. We report a series of emissive metal-organic frameworks (MOFs) generated using BUT-10 (BUT: Beijing University of Technology) that emits green light with λmax at 525 nm. Post-synthetic reduction of the ketone on the fluorenone ligand in BUT-10 generates new materials, BUT-10-M and BUT-10-R. The emission for BUT-10-R is hypsochromically-shifted by 113 nm. Multivariate BUT-10-M structures demonstrate emission with two maxima corresponding to the emission of both fluorenol and fluorenone moieties present in their structures. Our study represents a novel post-synthetic ligand reduction strategy for producing emissive MOFs with tunable emission ranging from green, white-blue to deep blue.

Vibronic and Environmental Effects in Simulations of Optical Spectroscopy.

Including both environmental and vibronic effects is important for accurate simulation of optical spectra, but combining these effects remains computationally challenging. We outline two approaches that consider both the explicit atomistic environment and the vibronic transitions. Both phenomena are responsible for spectral shapes in linear spectroscopy and the electronic evolution measured in nonlinear spectroscopy. The first approach utilizes snapshots of chromophore-environment configurations for which chromophore normal modes are determined. We outline various approximations for this static approach that assumes harmonic potentials and ignores dynamic system-environment coupling. The second approach obtains excitation energies for a series of time-correlated snapshots. This dynamic approach relies on the accurate truncation of the cumulant expansion but treats the dynamics of the chromophore and the environment on equal footing. Both approaches show significant potential for making strides toward more accurate optical spectroscopy simulations of complex condensed phase systems.

Explicit environmental and vibronic effects in simulations of linear and nonlinear optical spectroscopy.

Accurately simulating the linear and nonlinear electronic spectra of condensed phase systems and accounting for all physical phenomena contributing to spectral line shapes presents a significant challenge. Vibronic transitions can be captured through a harmonic model generated from the normal modes of a chromophore, but it is challenging to also include the effects of specific chromophore-environment interactions within such a model. We work to overcome this limitation by combining approaches to account for both explicit environment interactions and vibronic couplings for simulating both linear and nonlinear optical spectra. We present and show results for three approaches of varying computational cost for combining ensemble sampling of chromophore-environment configurations with Franck-Condon line shapes for simulating linear spectra. We present two analogous approaches for nonlinear spectra. Simulated absorption spectra and two-dimensional electronic spectra (2DES) are presented for the Nile red chromophore in different solvent environments. Employing an average Franck-Condon or 2DES line shape appears to be a promising method for simulating linear and nonlinear spectroscopy for a chromophore in the condensed phase.

Influence of non-adiabatic effects on linear absorption spectra in the condensed phase: Methylene blue.

Modeling linear absorption spectra of solvated chromophores is highly challenging as contributions are present both from coupling of the electronic states to nuclear vibrations and from solute-solvent interactions. In systems where excited states intersect in the Condon region, significant non-adiabatic contributions to absorption line shapes can also be observed. Here, we introduce a robust approach to model linear absorption spectra accounting for both environmental and non-adiabatic effects from first principles. This model parameterizes a linear vibronic coupling (LVC) Hamiltonian directly from energy gap fluctuations calculated along molecular dynamics (MD) trajectories of the chromophore in solution, accounting for both anharmonicity in the potential and direct solute-solvent interactions. The resulting system dynamics described by the LVC Hamiltonian are solved exactly using the thermalized time-evolving density operator with orthogonal polynomials algorithm (T-TEDOPA). The approach is applied to the linear absorption spectrum of methylene blue in water. We show that the strong shoulder in the experimental spectrum is caused by vibrationally driven population transfer between the bright S1 and the dark S2 states. The treatment of the solvent environment is one of many factors that strongly influence the population transfer and line shape; accurate modeling can only be achieved through the use of explicit quantum mechanical solvation. The efficiency of T-TEDOPA, combined with LVC Hamiltonian parameterizations from MD, leads to an attractive method for describing a large variety of systems in complex environments from first principles.

Nonlinear spectroscopy in the condensed phase: The role of Duschinsky rotations and third order cumulant contributions.

First-principles modeling of nonlinear optical spectra in the condensed phase is highly challenging because both environment and vibronic interactions can play a large role in determining spectral shapes and excited state dynamics. Here, we compute two dimensional electronic spectroscopy (2DES) signals based on a cumulant expansion of the energy gap fluctuation operator, with specific focus on analyzing mode mixing effects introduced by the Duschinsky rotation and the role of the third order term in the cumulant expansion for both model and realistic condensed phase systems. We show that for a harmonic model system, the third order cumulant correction captures effects introduced by a mismatch in curvatures of ground and excited state potential energy surfaces, as well as effects of mode mixing. We also demonstrate that 2DES signals can be accurately reconstructed from purely classical correlation functions using quantum correction factors. We then compute nonlinear optical spectra for the Nile red and methylene blue chromophores in solution, assessing the third order cumulant contribution for realistic systems. We show that the third order cumulant correction is strongly dependent on the treatment of the solvent environment, revealing the interplay between environmental polarization and the electronic-vibrational coupling.

The ONETEP linear-scaling density functional theory program.

We present an overview of the onetep program for linear-scaling density functional theory (DFT) calculations with large basis set (plane-wave) accuracy on parallel computers. The DFT energy is computed from the density matrix, which is constructed from spatially localized orbitals we call Non-orthogonal Generalized Wannier Functions (NGWFs), expressed in terms of periodic sinc (psinc) functions. During the calculation, both the density matrix and the NGWFs are optimized with localization constraints. By taking advantage of localization, onetep is able to perform calculations including thousands of atoms with computational effort, which scales linearly with the number or atoms. The code has a large and diverse range of capabilities, explored in this paper, including different boundary conditions, various exchange-correlation functionals (with and without exact exchange), finite electronic temperature methods for metallic systems, methods for strongly correlated systems, molecular dynamics, vibrational calculations, time-dependent DFT, electronic transport, core loss spectroscopy, implicit solvation, quantum mechanical (QM)/molecular mechanical and QM-in-QM embedding, density of states calculations, distributed multipole analysis, and methods for partitioning charges and interactions between fragments. Calculations with onetep provide unique insights into large and complex systems that require an accurate atomic-level description, ranging from biomolecular to chemical, to materials, and to physical problems, as we show with a small selection of illustrative examples. onetep has always aimed to be at the cutting edge of method and software developments, and it serves as a platform for developing new methods of electronic structure simulation. We therefore conclude by describing some of the challenges and directions for its future developments and applications.

Effect of Ions on the Optical Absorption Spectra of Aqueously Solvated Chromophores.

In the condensed phase, ions often create heterogeneous local environments around a solute, which may impart chemical reactivity or perturbations to physicochemical properties. Although the former has been the subject of some study, the latter-particularly as is pertains to optical absorption spectroscopy-is much less understood. In this work, the computed UV-vis absorption spectrum is examined for the aqueously solvated chromophore anion of green fluorescent protein for different local ion configurations. The strong ability of water to screen the ions from the chromophore results in little change in excitation energy compared to a purely aqueous environment. However, upon forming a contact ion pair with a sodium ion at either of the two electronegative oxygen sites of the chromophore, there is a spectral shift to either higher or lower energies. Surprisingly, our analysis suggests that the cause of the spectral shift is dominated not by the electrostatic presence of the ion but instead by ion disruption of the hydrogen bond network at the oxygen contact ion pair site.

Optical spectra in the condensed phase: Capturing anharmonic and vibronic features using dynamic and static approaches.

Simulating optical spectra in the condensed phase remains a challenge for theory due to the need to capture spectral signatures arising from anharmonicity and dynamical effects, such as vibronic progressions and asymmetry. As such, numerous simulation methods have been developed that invoke different approximations and vary in their ability to capture different physical regimes. Here, we use several models of chromophores in the condensed phase and ab initio molecular dynamics simulations to rigorously assess the applicability of methods to simulate optical absorption spectra. Specifically, we focus on the ensemble scheme, which can address anharmonic potential energy surfaces but relies on the applicability of extreme nuclear-electronic time scale separation; the Franck-Condon method, which includes dynamical effects but generally only at the harmonic level; and the recently introduced ensemble zero-temperature Franck-Condon approach, which straddles these limits. We also devote particular attention to the performance of methods derived from a cumulant expansion of the energy gap fluctuations and test the ability to approximate the requisite time correlation functions using classical dynamics with quantum correction factors. These results provide insights as to when these methods are applicable and able to capture the features of condensed phase spectra qualitatively and, in some cases, quantitatively across a range of regimes.

Unraveling electronic absorption spectra using nuclear quantum effects: Photoactive yellow protein and green fluorescent protein chromophores in water.

Many physical phenomena must be accounted for to accurately model solution-phase optical spectral line shapes, from the sampling of chromophore-solvent configurations to the electronic-vibrational transitions leading to vibronic fine structure. Here we thoroughly explore the role of nuclear quantum effects, direct and indirect solvent effects, and vibronic effects in the computation of the optical spectrum of the aqueously solvated anionic chromophores of green fluorescent protein and photoactive yellow protein. By analyzing the chromophore and solvent configurations, the distributions of vertical excitation energies, the absorption spectra computed within the ensemble approach, and the absorption spectra computed within the ensemble plus zero-temperature Franck-Condon approach, we show how solvent, nuclear quantum effects, and vibronic transitions alter the optical absorption spectra. We find that including nuclear quantum effects in the sampling of chromophore-solvent configurations using ab initio path integral molecular dynamics simulations leads to improved spectral shapes through three mechanisms. The three mechanisms that lead to line shape broadening and a better description of the high-energy tail are softening of heavy atom bonds in the chromophore that couple to the optically bright state, widening the distribution of vertical excitation energies from more diverse solvation environments, and redistributing spectral weight from the 0-0 vibronic transition to higher energy vibronic transitions when computing the Franck-Condon spectrum in a frozen solvent pocket. The absorption spectra computed using the combined ensemble plus zero-temperature Franck-Condon approach yield significant improvements in spectral shape and width compared to the spectra computed with the ensemble approach. Using the combined approach with configurations sampled from path integral molecular dynamics trajectories presents a significant step forward in accurately modeling the absorption spectra of aqueously solvated chromophores.

Environmentally Driven Symmetry Breaking Quenches Dual Fluorescence in Proflavine.

Nonadiabatic couplings between several electronic excited states are ubiquitous in many organic chromophores and can significantly influence optical properties. A recent experimental study demonstrated that the proflavine molecule exhibits surprising dual fluorescence in the gas phase, which is suppressed in polar solvent environments. Here, we uncover the origin of this phenomenon by parametrizing a linear-vibronic coupling Hamiltonian from spectral densities of system-bath coupling constructed along molecular dynamics trajectories, fully accounting for interactions with the condensed-phase environment. The finite-temperature absorption, steady-state emission, and time-resolved emission spectra are then computed using powerful, numerically exact tensor network approaches. We find that the dual fluorescence in vacuum is driven by a single well-defined coupling mode but is quenched in solution due to dynamic solvent-driven symmetry breaking that mixes the two low-lying electronic states. We expect the computational framework developed here to be widely applicable to the study of non-Condon effects in complex condensed-phase environments.

Implementing vanadium peroxides as direct air carbon capture materials.

Direct air capture (DAC) removal of anthropogenic CO2 from the atmosphere is imperative to slow the catastrophic effects of global climate change. Numerous materials are being investigated, including various alkaline inorganic metal oxides that form carbonates via DAC. Here we explore metastable early d0 transition metal peroxide molecules that undergo stabilization via multiple routes, including DAC. Specifically here, we describe via experiment and computation the mechanistic conversion of A3V(O2)4 (tetraperoxovanadate, A = K, Rb, Cs) to first a monocarbonate VO(O2)2(CO3)3-, and ultimately HKCO3 plus KVO4. Single crystal X-ray structures of rubidium and cesium tetraperoxovanadate are reported here for the first time, likely prior-challenged by instability. Infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), 51V solid state NMR (nuclear magnetic resonance), tandem thermogravimetry-mass spectrometry (TGA-MS) along with calculations (DFT, density functional theory) all converge on mechanisms of CO2 capture and release that involve the vanadium centre, despite the end product of a 300 days study being bicarbonate and metavanadate. Electron Paramagnetic Resonance (EPR) Spectroscopy along with a wet chemical assay and computational studies evidence the presense of ∼5% adventitous superoxide, likely formed by peroxide reduction of vanadium, which also stabilizes via the reaction with CO2. The alkalis have a profound effect on the stability of the peroxovanadate compounds, stability trending K > Rb > Cs. While this translates to more rapid CO2 capture with heavier alkalis, it does not necessarily lead to capture of more CO2. All compounds capture approximately two equivalents CO2 per vanadium centre. We cannot yet explain the reactivity trend of the alkali peroxovanadates, because any change in speciation of the alkalis from reactions to product is not quantifiable. This study sets the stage for understanding and implementing transition metal peroxide species, including peroxide-functionalized metal oxides, for DAC.

Elucidating the Role of Hydrogen Bonding in the Optical Spectroscopy of the Solvated Green Fluorescent Protein Chromophore: Using Machine Learning to Establish the Importance of High-Level Electronic Structure.

Hydrogen bonding interactions with chromophores in chemical and biological environments play a key role in determining their electronic absorption and relaxation processes, which are manifested in their linear and multidimensional optical spectra. For chromophores in the condensed phase, the large number of atoms needed to simulate the environment has traditionally prohibited the use of high-level excited-state electronic structure methods. By leveraging transfer learning, we show how to construct machine-learned models to accurately predict the high-level excitation energies of a chromophore in solution from only 400 high-level calculations. We show that when the electronic excitations of the green fluorescent protein chromophore in water are treated using EOM-CCSD embedded in a DFT description of the solvent the optical spectrum is correctly captured and that this improvement arises from correctly treating the coupling of the electronic transition to electric fields, which leads to a larger response upon hydrogen bonding between the chromophore and water.

Colorimetric detection of acidic pesticides in water.

A water-stable, porphyrin-based metal-organic framework (MOF) produces a distinct colour change in response to acids' pKa and concentrations. This colour change is associated with the protonation of the N-atoms within the porphyrin ligand present in the MOF structure. As a proof-of-concept, we demonstrate the use of this MOF for detecting traces of different acidic pesticides present in water samples spontaneously.

Comparison of Linear Response Theory, Projected Initial Maximum Overlap Method, and Molecular Dynamics-Based Vibronic Spectra: The Case of Methylene Blue.

The simulation of optical spectra is essential to molecular characterization and, in many cases, critical for interpreting experimental spectra. The most common method for simulating vibronic absorption spectra relies on the geometry optimization and computation of normal modes for ground and excited electronic states. In this report, we show that the utilization of such a procedure within an adiabatic linear response (LR) theory framework may lead to state mixings and a breakdown of the Born-Oppenheimer approximation, resulting in a poor description of absorption spectra. In contrast, computing excited states via a self-consistent field method in conjunction with a maximum overlap model produces states that are not subject to such mixings. We show that this latter method produces vibronic spectra much more aligned with vertical gradient and molecular dynamics (MD) trajectory-based approaches. For the methylene blue chromophore, we compare vibronic absorption spectra computed with the following: an adiabatic Hessian approach with LR theory-optimized structures and normal modes, a vertical gradient procedure, the Hessian and normal modes of maximum overlap method-optimized structures, and excitation energy time-correlation functions generated from an MD trajectory. Because of mixing between the bright S1 and dark S2 surfaces near the S1 minimum, computing the adiabatic Hessian with LR theory and time-dependent density functional theory with the B3LYP density functional predicts a large vibronic shoulder for the absorption spectrum that is not present for any of the other methods. Spectral densities are analyzed and we compare the behavior of the key normal mode that in LR theory strongly couples to the optical excitation while showing S1/S2 state mixings. Overall, our study provides a note of caution in computing vibronic spectra using the excited-state adiabatic Hessian of LR theory-optimized structures and also showcases three alternatives that are less sensitive to adiabatic state mixing effects.