Long-distance indoor optical camera communication using side-emitting fibers as distributed transmitters.

We present a design approach for a long-distance optical camera communication (OCC) system using side-emitting fibers as distributed transmitters. We demonstrate our approach feasibility by increasing the transmission distance by two orders up to 40 m compared to previous works. Furthermore, we explore the effect of the light-emitting diode (LED) modulation frequency and rolling shutter camera exposure time on inter-symbol interference and its effective mitigation. Our proposed OCC-fiber link meets the forward-error-correction (FEC) limit of 3.8 · 10-3 of bit error rate (BER) for up to 35 m (with BER= 3.35 · 10-3) and 40 m (with BER=1.13 · 10-3) using 2-mm and 3-mm diameter side-emitting fibers, respectively. Our results at on-off keying modulation frequencies of 3.54 kHz and 5.28 kHz pave the way to moderate-distance outdoor and long-distance indoor highly-reliable applications in the Internet of Things and OCC using side-emitting fiber-based distributed transmitters.

Gap design to enable functionalities into nested antiresonant nodeless fiber based systems.

By modifying the interconnection design between standard single-mode fiber (SSMF) and nested antiresonant nodeless type hollow-core fiber (NANF), we create an air gap between SSMF and NANF. This air gap enables the insertion of optical elements, thus providing additional functions. We show low-loss coupling using various graded-index multimode fibers acting as mode-field adapters resulting in different air-gap distances. Finally, we test the gap functionality by inserting a thin glass sheet in the air gap, which forms a Fabry-Perot interferometer and works as a filter with an overall insertion loss of only 0.31 dB.

Side-emitting fiber-based distributed receiver for visible light communication uplink.

We present a distributed receiver for visible light communication based on a side-emitting optical fiber. We show that 500 kbps data rate can be captured with a bit-error rate below the forward-error correction limit of 3.8·10-3 with a light-emitting diode (LED) transmitter 25 cm away from the fiber, whereas by increasing the photodetector gain and reducing the data rate down to 50 kbps, we improve the LED-fiber distance significantly up to 4 m. Our results lead to a low-cost distributed visible-light receiver with a 360° field of view for indoor low-data rate, Internet of Things, and sensory networks.

Curved OLED-based NLOS optical camera communications links.

In this paper, for the first time, to the best of our knowledge, we experimentally demonstrate the use of a curved organic light emitting diode (OLED) as a transmitter (Tx) in the non-line-of-sight (NLOS) optical camera communication (OCC) link for an indoor environment using a camera as a receiver. The proposed NLOS-OCC scheme is evaluated for the signal-to-noise ratio (SNR) and the reception success rates R r s under key photographic and communication parameters, including exposure times t e x p and gain values G v, as well as the transmission frequency f s and the distance L. The SNR analysis is performed using a binary classification procedure based on a Gaussian mixture model for the first time, to the best of our knowledge, for OLED-based NLOS-OCC links. We also derive and demonstrate that the effect of G v on the SNR with respect to L is minimal based on the pixel illumination model. The initial analysis suggests that, for a wall reflector-based NLOS-OCC link that is 2 m long, the SNR and R r s increase by 1 dB and 4% (83-87%) for f s of 600 Hz, with an increase in t e x p of 1000-1500 µs and G v of 25-45 dB.

General framework for calculating irradiance distributions of symmetric surface sources.

Symmetries in system modeling can be exploited to obtain analytical results on the system behavior and to speed up computations using the symmetric model. This work explores the use of symmetries in radiant surfaces for calculating the induced irradiance distributions by developing a general mathematical expression. The obtained model is applied to flat, cylindrical, and spherical sources to obtain explicit expressions. An experimental evaluation of the flat source is carried out and compared with a traditional point source, and the obtained procedure for the flat scenario is compared with the direct integration approach, which shows an improvement in the computation time of at least two orders of magnitude with a relative root mean square error of less than 10%. The results show that the proposed approach enhances short-range predictions for extended sources. To demonstrate the impact of this in optical wireless communications we have outlined a few applications.

Low loss and broadband low back-reflection interconnection between a hollow-core and standard single-mode fiber.

We report simultaneous low coupling loss (below 0.2 dB at 1550 nm) and low back-reflection (below -60 dB in the 1200-1600 nm range) between a hollow core fiber and standard single mode optical fiber obtained through the combination of an angled interface and an anti-reflective coating. We perform experimental optimization of the interface angle to achieve the best combination of performance in terms of the coupling loss and back-reflection suppression. Furthermore, we examine parasitic cross-coupling to the higher-order modes and show that it does not degrade compared to the case of a flat interface, keeping it below -30 dB and below -20 dB for LP11 and LP02 modes, respectively.

Optical time domain backscattering of antiresonant hollow core fibers.

Today's lowest-loss hollow core fibers are based on antiresonance guidance. They have been shown both theoretically and experimentally to have very low levels of backscattering arising from the fiber structure - 45 dB below that of traditional optical fibers with a solid silica glass core. This makes their longitudinal characterization using conventional reflectometric techniques very challenging. However, it was recently estimated that when filled with air, their backscattering coefficient increases to about 30 dB below that of standard solid core fibers. This level should be measurable with commercially available high performance optical time domain reflectometers (OTDR). Here we demonstrate - for the first time to the best of our knowledge - the measurement of backscattering from the air inside a hollow core fiber. We show that the characterization of multi-km long hollow core fibers with 15 m spatial resolution is possible using a commercial OTDR instrument. To benefit from its full dynamic range, we strongly suppress the 4% back-reflections that ordinarily occur at the OTDR's standard fiber output when directly-connected to a hollow core fiber. Furthermore, low coupling loss into the hollow core fiber (0.3 dB in our experiment) also helps to maximize the achievable OTDR signal-to-noise ratio. This approach enables distributed characterization and fault-finding in low-loss hollow core fibers, a topic of increasing importance as these fibers are now starting to be installed in commercial optical communication networks.

Visible light communication with OLEDs for D2D communications considering user movement and receiver orientations.

With the increasing use of organic light emitting diodes in lights, smart phones, wearable smartwatches, and computers, visible light-based device-to-device (D2D) communications has become more and more relevant. We propose D2D communications using smart phones' display pixels and their built-in cameras. We investigate the impact of receiver orientation and user mobility on the link performance. We derive a Gaussian model for the probability density function of the delay spread and optical path loss (OPL), and show that the channel delay spread decreases for a typical furnished room compared with an empty room, whereas the former has an increased OPL. In addition, we show that for the case of a furnished room and considering user mobility, the peak OPL values are about 64 and 62 dB, with and without considering the receiver's random orientation, respectively.

Optimization and design of a diffuse optical wireless sensor network.

Wireless sensor networks (WSNs) are currently being deployed in everyday objects to collect and transmit information related to humidity, temperature, heartbeat, motion, etc. Such networks are part of the massive machine-type communication (mMTC) scenario within the fifth/sixth generation of wireless networks. In this paper, we consider the optimization and design of an optical WSN composed of multiple battery-powered sensor nodes based on light-emitting diode transmitters. Extending our previous work, we take into account both line-of-sight and diffuse-light propagation, and show that in indoor scenarios, diffuse radiation can improve link availability under shadowing/blocking and extend battery life. In order to optimize the optical wireless link parameters, we use a machine-learning approach based on a genetic algorithm to ascertain the performance limits of the system. The presented results indicate that the proposed system is a viable wireless option for WSNs within the context of mMTC.

Full-duplex transmission of multi-Gb/s subcarrier multiplexing and 5G NR signals in 39 GHz band over fiber and space.

We propose a stable full-duplex transmission of millimeter-wave signals over a hybrid single-mode fiber (SMF) and free-space optics (FSO) link for the fifth-generation (5G) radio access networks to accelerate the Industry 4.0 transformation. For the downlink (DL), we transmit 39 GHz subcarrier multiplexing (SCM) signals using variable quadrature amplitude modulation (QAM) allocations for multi-user services. As a proof of operation, we experimentally demonstrate the transmission of 3 Gb/s SCM signals (1 Gb/s per user) over a hybrid system consisting of a 10 km SMF and 1.2 m FSO link. For the uplink (UL), satisfactory performance for the transmission of 2.4 Gb/s 5G new radio (NR) signal at 37 GHz over the hybrid system is experimentally confirmed for the first time, to the best of our knowledge. The measured error vector magnitudes for both DL and UL signals using 4/16/64-QAM formats are well below the third generation partnership project (3GPP) requirements. We also further evaluate by simulation the full-duplex transmission over the system in terms of received optical and RF powers and bit error rate performance. A wireless radio distance of approximately 200 m, which is sufficient for 5G small-cell networks, is estimated for both DL and UL direction under the heavy rain condition, based on the available data from Spain. Furthermore, simulation for the DL direction is conducted to verify the superior performance of the system using variable QAM allocation over uniform QAM allocation. Using a variable modulation allocation, up to five users (2 Gb/s per user) can be transmitted over a hybrid 10 km SMF and 150 m FSO link.

The Usage of ANN for Regression Analysis in Visible Light Positioning Systems.

In this paper, we study the design aspects of an indoor visible light positioning (VLP) system that uses an artificial neural network (ANN) for positioning estimation by considering a multipath channel. Previous results usually rely on the simplistic line of sight model with limited validity. The study considers the influence of noise as a performance indicator for the comparison between different design approaches. Three different ANN algorithms are considered, including Levenberg-Marquardt, Bayesian regularization, and scaled conjugate gradient algorithms, to minimize the positioning error (εp) in the VLP system. The ANN design is optimized based on the number of neurons in the hidden layers, the number of training epochs, and the size of the training set. It is shown that, the ANN with Bayesian regularization outperforms the traditional received signal strength (RSS) technique using the non-linear least square estimation for all values of signal to noise ratio (SNR). Furthermore, in the inner region, which includes the area of the receiving plane within the transmitters, the positioning accuracy is improved by 43, 55, and 50% for the SNR of 10, 20, and 30 dB, respectively. In the outer region, which is the remaining area within the room, the positioning accuracy is improved by 57, 32, and 6% for the SNR of 10, 20, and 30 dB, respectively. Moreover, we also analyze the impact of different training dataset sizes in ANN, and we show that it is possible to achieve a minimum εp of 2 cm for 30 dB of SNR using a random selection scheme. Finally, it is observed that εp is low even for lower values of SNR, i.e., εp values are 2, 11, and 44 cm for the SNR of 30, 20, and 10 dB, respectively.

Optical camera communications link using an LED-coupled illuminating optical fiber.

In this Letter, we propose and demonstrate a novel wireless communications link using an illuminating optical fiber as a transmitter (Tx) in optical camera communications. We demonstrate an indoor proof-of-concept system using an illuminating plastic optical fiber coupled with a light-emitting diode and a commercial camera as the Tx and the receiver, respectively. For the first time, to the best of our knowledge, we experimentally demonstrate flicker-free wireless transmission within the off-axis camera rotation angle range of 0-45° and the modulation frequencies of 300 and 500 Hz. We also show that a reception success rate of 100% is achieved for the camera exposure and gain of 200 µs and 25 dB, respectively.

Sandstorm effect on experimental optical camera communication.

Sandstorms can severely affect the reliability of outdoor optical wireless communications (OWC) by diminishing large regions' visibility. In this work, the effect of a real sandstorm on optical camera communications (OCC) links is experimentally evaluated. Two link ranges are essayed using a cost-efficient telescope-based camera setup with commercial LEDs. Using on-off keying modulation, a data rate of 1035 and 630 bps with error probabilities of 9.14⋅10-5 and 4.1⋅10-3 for 100 m and 200 m, respectively, can be achieved. The signal-to-noise ratio of the links was optimized by tuning the analog amplifier's gain of the camera, increasing it by up to 9 dB. It is shown that scattering due to the sandstorm can even be beneficial for increasing the data rate in OCC (contrary to classical photodetector-based OWC links), thanks to an increment of 33% on the region of interest dimensions compared to the expected clear air link.

A 40 Mb/s VLC System Reusing an Existing Large LED Panel in an Indoor Office Environment.

With advances in solid-state lighting, visible light communication (VLC) has emerged as a promising technology to enhance existing light-emitting diode (LED)-based lighting infrastructure by adding data communication capabilities to the illumination functionality. The last decade has witnessed the evolution of the VLC concept through global standardisation and product launches. Deploying VLC systems typically requires replacing existing light sources with new luminaires that are equipped with data communication functionality. To save the investment, it is clearly desirable to make the most of the existing illumination systems. This paper investigates the feasibility of adding data communication functionality to the existing lighting infrastructure. We do this by designing an experimental system in an indoor environment based on an off-the-shelf LED panel typically used in office environments, with the dimensions of 60 × 60 cm2. With minor modifications, the VLC function is implemented, and all of the modules of the LED panel are fully reused. A data rate of 40 Mb/s is supported at a distance of up to 2 m while using the multi-band carrierless amplitude and phase (CAP) modulation. Two main limiting factors for achieving higher data rates are observed. The first factor is the limited bandwidth of the LED string inside the panel. The second is the flicker due to the residual ripple of the bias current that is generated by the panel's driver. Flicker is introduced by the low-cost driver, which provides bias currents that fluctuate in the low frequency range (less than several kilohertz). This significantly reduces the transmitter's modulation depth. Concurrently, the driver can also introduce an effect that is similar to baseline wander at the receiver if the flicker is not completely filtered out. We also proposed a solution based on digital signal processing (DSP) to mitigate the flicker issue at the receiver side and its effectiveness has been confirmed.

Editorial to the Special Issue on "Visible Light Communications, Networking, and Sensing".

The next generation wireless technology networks and beyond (i [...].

Wireless Sensor Networks Using Sub-Pixel Optical Camera Communications: Advances in Experimental Channel Evaluation.

Optical wireless communications in outdoor scenarios are challenged by uncontrollable atmospheric conditions that impair the channel quality. In this paper, different optical camera communications (OCC) equipment are experimentally studied in the laboratory and the field, and a sub-pixel architecture is raised as a potential solution for outdoor wireless sensor networks (WSN) applications, considering its achievable data throughput, the spatial division of sources, and the ability of cameras to overcome the attenuation caused by different atmospheric conditions such as rain, turbulence and the presence of aerosols. Sub-pixel OCC shows particularly adequate capabilities for some of the WSN applications presented, also in terms of cost-effectiveness and scalability. The novel topology of sub-pixel projection of multiple transmitters over the receiver using small optical devices is presented as a solution using OCC that re-uses camera equipment for communication purposes on top of video-monitoring.

The Utilization of Artificial Neural Network Equalizer in Optical Camera Communications.

In this paper, we propose and validate an artificial neural network-based equalizer for the constant power 4-level pulse amplitude modulation in an optical camera communications system. We introduce new terminology to measure the quality of the communications link in terms of the number of row pixels per symbol Npps, which allows a fair comparison considering the progress made in the development of the current image sensors in terms of the frame rates and the resolutions of each frame. Using the proposed equalizer, we experimentally demonstrate a non-flickering system using a single light-emitting diode (LED) with Npps of 20 and 30 pixels/symbol for the unequalized and equalized systems, respectively. Potential transmission rates of up to 18.6 and 24.4 kbps are achieved with and without the equalization, respectively. The quality of the received signal is assessed using the eye-diagram opening and its linearity and the bit error rate performance. An acceptable bit error rate (below the forward error correction limit) and an improvement of ~66% in the eye linearity are achieved using a single LED and a typical commercial camera with equalization.

Performance of Vehicular Visible Light Communications under the Effects of Atmospheric Turbulence with Aperture Averaging.

In this paper, we investigate the performance of a vehicular visible light communications (VVLC) link with a non-collimated and incoherent light source (a light-emitting diode) as the transmitter (Tx), and two different optical receiver (Rx) types (a camera and photodiode (PD)) under atmospheric turbulence (AT) conditions with aperture averaging (AA). First, we present simulation results indicating performance improvements in the signal-to-noise ratio (SNR) under AT with AA with increasing size of the optical concentrator. Experimental investigations demonstrate the potency of AA in mitigating the induced signal fading due to the weak to moderate AT regimes in a VVLC system. The experimental results obtained with AA show that the link's performance was stable in terms of the average SNR and the peak SNR for the PD and camera-based Rx links, respectively with <1 dB SNR penalty for both Rxs, as the strength of AT increases compared with the link with no AT.

An Indoor Visible Light Positioning System Using Tilted LEDs with High Accuracy.

The accuracy of the received signal strength-based visible light positioning (VLP) system in indoor applications is constrained by the tilt angles of transmitters (Txs) and receivers as well as multipath reflections. In this paper, for the first time, we show that tilting the Tx can be beneficial in VLP systems considering both line of sight (LoS) and non-line of sight transmission paths. With the Txs oriented towards the center of the receiving plane (i.e., the pointing center F), the received power level is maximized due to the LoS components on F. We also show that the proposed scheme offers a significant accuracy improvement of up to ~66% compared with a typical non-tilted Tx VLP at a dedicated location within a room using a low complex linear least square algorithm with polynomial regression. The effect of tilting the Tx on the lighting uniformity is also investigated and results proved that the uniformity achieved complies with the European Standard EN 12464-1. Furthermore, we show that the accuracy of VLP can be further enhanced with a minimum positioning error of 8 mm by changing the height of F.

Coverage of a shopping mall with flexible OLED-based visible light communications.

Visible light communications (VLC) can utilize light-emitting diodes (LEDs) to provide illumination and a safe and low-cost broadcasting network simultaneously. In the past decade, there has been a growing interest in using organic LEDs (OLEDs) for soft lighting and display applications in public places. Organic electronics can be mechanically flexible, thus the potential of curved OLED panels/displays devices. This paper provides unique characteristics of a flexible OLED-based VLC link in a shopping mall. We show that, for curved OLED the radiation pattern displays a symmetry, which is wider than Lambertian. A number of scenarios of VLC system with flexible OLED are analyzed. Numerical models for the delay spread and optical path loss are derived, which followed a 2-term power series model for both empty and furnished rooms. We show that using a full-circular OLED for both empty and furnished rooms offers a uniform distribution of emitted power for the same transmission link spans. The link performance using full and half-circular OLED in an empty room shows that the average optical path losses are lower by 5 and 4 dB, compared with the furnished room.