Engineering of Cerium Modified TiNb2O7 Nanoparticles For Low-Temperature Lithium-Ion Battery.

Although TiNb2O7 (TNO) with comparable operating potential and ideal theoretical capacity is considered to be the most ideal replacement for negative Li4Ti5O12 (LTO), the low ionic and electronic conductivity still limit its practical application as satisfactory anode for lithium-ion batteries (LIBs) with high-power density. Herein, TNO nanoparticles modified by Cerium (Ce) with outstanding electrochemical performance are synthesized. The successful introduction of Ce3+ in the lattice leads to increased interplanar spacing, refined grain size, more oxygen vacancy, and a smaller lithium diffusion barrier, which are conducive to improve conductivity of both Li+ and electrons. As a result, the modified TNO reaches high reversible capacity of 256.0 mA h g-1 at 100 mA g-1 after 100 cycles, and 183.0 mA h g-1 even under 3200 mA g-1. In particular, when the temperature drops to -20 °C, the cell undergoing 1500 cycles at a high current density of 500 mA g-1 can still reach 89.7 mA h g-1, corresponding to a capacity decay rate per cycle of only 0.033%. This work provides a new way to improve the electrochemical properties of alternative anodes for LIBs at extreme temperature.

Effect of Tb3+ and Ce3+ Co-doping on the Structure and Photoluminescence Properties of Hexagonal Boron Nitride Phosphors.

In the paper, we have successfully prepared hexagonal boron nitride (h-BN:Tb3+, Ce3+) phosphors with melamine as the nitrogen source. The X-ray powder diffraction patterns confirm that the sample possesses a hexagonal crystal structure within the P 6 ¯ m2 space group. It is interesting that the co-doping combination of Tb3+ and Ce3+ can markedly enhance the threshold concentration of doped activators within the limited solid solution of h-BN phosphors. Under 302 nm excitation, the h-BN:Ce3+ phosphors exhibit broadband blue light emission at 406 nm. In h-BN:Tb3+, Ce3+ phosphors, the co-doping of Ce3+ not only ensures high phase purity but also results in strong green light emission. The energy transfer efficiency from Ce3+ to Tb3+ is about 55%. The fluorescence lifetime increases with the increase of Ce3+ and Tb3+ concentration, and the fluorescence lifetime of h-BN:0.025Tb3+, 0.05Ce3+ phosphor reached 2.087 ms. Additionally, the h-BN:0.025Tb3+, 0.05Ce3+ phosphor exhibits excellent thermal performance with an activation energy value of 0.2825 eV. Moreover, the photoluminescence quantum yield of the sample exceeds 52%. Therefore, the h-BN:Tb3+, Ce3+ samples can be used as green phosphors for solid state lighting and fluorescent labeling.

Study of Concentration Quenching and Energy Transfer Mechanism in Ce Doped Y2O3 Nanomaterials.

We study concentration quenching and energy transfer mechanisms of yttrium oxide (Y2O3) nanomaterials doped with different concentrations (0-5 mol%) of cerium (Ce). Photoluminescence (PL) spectra recorded under an excitation wavelength of 350 nm show a broad emission band at ∼ 406 nm and a feeble emission band at ∼ 463 nm in the undoped Y2O3 sample. The doping of Ce in Y2O3 induced multiple PL peaks within the blue-green region of the spectrum in all the doped samples with the peak at ∼ 466 nm being notably the prominent one. This prominent emission band exhibits a decrease in intensity with increasing Ce concentration due to concentration quenching. Analysis of Time-resolved photoluminescence (TRPL) spectra reveal that the average emission lifetime of Ce-doped Y2O3 is shorter than that of the undoped Y2O3 sample. The concentration quenching effect and the decrease of average emission lifetime of the dominant emission band are explained on the basis of energy transfer from the host Y2O3 to the Ce3+ ion centres. The critical quenching concentration of Ce3+ ion in Y2O3:Ce phosphor was identified to be 1 mol% and the critical transfer distance was estimated to be 23.74 Å. Analysis reveal that the concentration quenching mechanism involves nearest-neighbour interaction.

Label-free fluorescence turn-on detection of alkaline phosphatase activity using the calcein-Ce3+ complex.

This study introduces an innovative approach for the real-time and efficient detection of alkaline phosphatase (ALP) activity, using a calcein fluorescence probe and leveraging the static quenching properties of calcein fluorescence by Ce3+ metal ions. In this method, calcein serves as the signal element, with its fluorescence effectively preserved through energy transfer or charge transfer when coordinated with Ce3+. Conversely, ALP catalyzes the phosphopeptide substrate to generate a substantial amount of Pi, preventing calcein fluorescence quenching due to the higher affinity between Pi and Ce3+ compared with that between calcein and Ce3+. The fluorescence intensity ratio (F-F0/F0) exhibited excellent linearity, facilitating sensitive ALP detection. The proposed ALP detection method covers a range from 0 to 1.4 mU/mL (R2 = 0.9942), with the limit of detection at 0.069 mU/mL (S/N = 3). Additionally, this method was successfully applied for detecting ALP in serum samples and studying its inhibitors. This research introduces a novel clinical diagnosis approach for ALP sensing while broadening the potential applications of calcein.

Magnetic field-assisted adsorption of phosphate on biochar loading amorphous Zr-Ce (carbonate) oxide composite.

For metal-based phosphate adsorbents, the dispersity and utilization of surface metal active sites are crucial factors in their adsorption performance and synthesis cost. In this study, a biochar material modified with amorphous Zr-Ce (carbonate) oxides (BZCCO-13) was synthesized for the phosphate uptake, and the adsorption process was enhanced by magnetic field. The beside-magnetic field was shown to have a better influence than under-magnetic field on adsorption, with maximum adsorption capacities (123.67 mg P/g) 1.14-fold greater than that without magnetic field. The beside-magnetic field could also accelerate the adsorption rate, and the time to reach 90% maximum adsorption capacity decreased by 83%. BZCCO-13 has a wide range of application pHs from 5.0 to 10.0, with great selectivity and reusability. The results of XPS and ELNES showed that the "magnetophoresis" of Ce3+ under the magnetic field was the main reason for the enhanced adsorption performance. In addition, increased surface roughness, pore size and oxygen vacancies, enhanced mass transfer by Lorentz force under a magnetic field, all beneficially influenced the adsorption process. The mechanism of phosphate adsorption by BZCCO-13 could be attributed to electrostatic attraction and CO32-dominated ligand exchange. This study not only provided an effective strategy for designing highly effective phosphate adsorbents, but also provides a new light on the application of rare earth metal-based adsorbent in magnetic field.

The synthesis and properties of Ca3 Sc2 Si3 O12 :Ce3+ (CSSG) phosphor are utilized for the development of human-centric lighting light-emitting diodes (HCL-LEDs).

In this study, cerium ion (Ce3+ )-doped calcium scandium silicate garnet (Ca3 Sc2 Si3 O12 , abbreviated CSSG) phosphors were successfully synthesized using the sol-gel method. The crystal phase, morphology, and photoluminescence properties of the synthesized phosphors were thoroughly investigated. Under excitation by a blue light-emitting diode (LED) chip (450 nm), the CSSG phosphor displayed a wide emission spectrum spanning from green to yellow. Remarkably, the material exhibited exceptional thermal stability, with an emissivity ratio at 150°C to that at 25°C reaching approximately 85%. Additionally, the material showcased impressive optical performance when tested with a blue LED chip, including a color rendering index (CRI) exceeding 90, an R9 value surpassing 50, and a biological impact ratio (M/P) above 0.6. These noteworthy findings underscore the potential applications of CSSG as a white light-converting phosphor, particularly in the realm of human-centered lighting.

Solid-State, Hectogram-Scale Preparation of Red Carbon Dots as Phosphor for Energy-Transfer-Induced High-Quality White LEDs with CRI of 97.

In this study, pre-crystallization-controlled, solid-state preparation of red carbon dots (C-dots) from o-phenylenediamine on a hectogram scale with a 94% yield is reported. Highly efficient red phosphor (C-dots@MCC) is obtained by dispersing the C-dots in microcrystalline cellulose, which matched extremely well with the commercial Y3 Al5 O12 :Ce3+ (YAG) phosphor. White light-emitting diodes (WLEDs) fabricated from the two phosphors emitted warm white light with a correlated color temperature of 3845 K, CIE color coordinates of (0.38, 0.37), and an extremely high color rendering index (CRI) of 95, outperforming all the reported YAG-derived WLEDs. Furthermore, the CRI value of the WLED can be further increased to 97 after fine-tuning, which is the highest CRI for WLEDs of any C-dots derived devices reported so far. The superior performance of the WLED is attributed to a delicate energy transfer between YAG and C-dots@MCC. Most importantly, the WLED maintained excellent stabilities under varied currents, working durations, moistures, and temperatures.

Ce3+-induced Fluorescence Amplification of Copper Nanoclusters Based on Aggregation-induced Emission for Specific Sensing 2,6-pyridine Dicarboxylic Acid.

A straightforward, cost-effective and biocompatible reduction approach was applied to fabricate soluble but non-luminous glutathione-stabilized copper nanocluster (GSH-CuNCs). Surprisingly, as high as 1 × 103 times fluorescence enhancement was acquired when Ce3+ was injected at an extremely low concentration of only 18 µM. Ce3+ outperformed other rare-earth metal ions in terms of inducing fluorescence amplification of the non-luminous GSH-CuNCs. Furthermore, Ce3+ was employed as inducer for aggregation-induce emission (AIE) effect as well as reactant to coordinate with target of 2,6-pyridine dicarboxylic acid (DPA) due to the stronger coordination ability between Ce3+ and DPA than that of Ce3+ and GSH. As a result, the Ce3+/GSH-CuNCs ensemble was developed as a novel sensor to detect DPA in the "on-off" mode. When DPA was introduced into the sensor, Ce3+ failed to interact with GSH and detached from the surface of GSH-CuNCs, leading to fluorescence quenching. In addition, static quenching process and internal filtration effect (IFE) between Ce3+/GSH-CuNCs and DPA were also responsible for fluorescence quenching effect. A good linear relationship was obtained from 0.3 µM to 18 µM, with a limit of detection (LOD) of 0.19 µM. The as-proposed probe displayed high specificity to DPA and provided a simple, fast rapid and cheap method for construction this type of ensemble sensors to detect other targets.

Luminescence properties of Ce-doped ZrO2 phosphors synthesized by combustion method.

Zr1-x Cex O2 with x = 0.005, 0.01, 0.02, and 0.03 samples were synthesized using a combustion technique. The X-ray diffraction results revealed that Ce-doped ZrO2 nanoparticles were in a monoclinic structure up to 1 mol% Ce concentration. The increase in the Ce concentration caused more distortion in the monoclinic structure of zirconia. The samples showed a mixed phase (monoclinic + tetragonal) beyond 1 mol% Ce content. The crystallite size (D) and strain (ε) were calculated from the Williamson-Hall equation. The D decreased from 25 ± 1 to 20 ± 1 nm and ε increased from 0.03 to 0.28% with an increase in Ce concentration. Photoluminescence (PL) spectra of Zr1-x Cex O2 showed emission in the blue region under an excitation wavelength of 290 nm. Zr0.995 Ce0.005 O2 showed the highest PL intensity with an average lifetime of 0.93 µs, and the PL intensity decreased with the increase in the Ce concentration. Thermoluminescence (TL) glow curves of Zr1-x Cex O2 were measured after gamma irradiation (500 Gy) with a heating rate of 5 K s-1 . The TL curve of Zr0.995 Ce0.005 O2 showed two prominent peaks at 412 K (peak 1) and 600 K (peak 2). The first TL glow peak was shifted towards a higher temperature at 440 K above 1 mol% Ce concentration. Repetitive TL measurements on the same aliquot exhibited excellent repeatability. Kinetic parameters associated with the TL peaks were calculated using the curve fitting method. Peak 1 followed non-first-order kinetics. The value of the activation energy of the 440 K peak was found to be 0.95 ± 0.01 eV for Zr0.99 Ce0.01 O2 . These findings showed that Zr1-x Cex O2 might be used in lighting and radiation dosimeter applications.

Structural, photoluminescence, and photocatalytic performances of Ce3+ -activated orthovanadate oxides M3 (VO4 )2 (M: Mg or Zn) synthesized by solution combustion route.

This paper presents a research investigation into the synthesis of vanadate oxides M3 (VO4 )2 (M: Mg or Zn) using the solution combustion method and investigates their structural, photoluminescence, and photocatalytic properties after introducing cerium (Ce) as a dopant. The resulting synthesized samples all display an orthorhombic crystalline structure with crystallite sizes ranging from 71 to 110 nm. Morphological diversity among the samples is revealed through field-emission scanning electron microscopy (FESEM) imagery. Diffuse reflectance spectroscopy discloses that the introduction of Ce3+ as a dopant leads to an increase in the band gap energy. Notably, when excited at a wavelength of 340 nm, the photoluminescence emission intensity reaches its peak across all samples. This intensity undergoes enhancement due to Ce3+ doping, causing a slight shift toward shorter wavelengths attributable to the augmented band gap resulting from the dopant. Markedly, among the investigated materials, Ce3+ -activated Mg3 (VO4 )2 stands out with the most pronounced emission intensity, positioning it as a highly promising luminescent material. Additionally, the incorporation of Ce3+ has a positive effect on the photocatalytic performance of Mg3 (VO4 )2 , resulting in notable improvement.

Ratiometric fluorescence determination of alkaline phosphatase activity based on carbon dots and Ce3+-crosslinked copper nanoclusters.

A new ratiometric fluorescent probe for efficient determination of ALP was developed. The probe was constructed by combining Ce3+-crosslinked copper nanoclusters (Ce3+-CuNCs) which exhibit the aggregation-induced emission (AIE) feature with carbon dots (CDs). The introduction of phosphate (Pi) induced the generation of CePO4 precipitation, resulting in significant decrease of fluorescence emission of CuNCs at 634 nm. At the same time, the fluorescence of CDs at 455 nm was obviously enhanced, thus generating ratiometric fluorescence response. Based on the fact that the hydrolysis of pyrophosphate (PPi) by ALP can produce Pi, the CD/Ce3+-CuNCs ratiometric probe was successfully used to determine ALP. A good linear relationship between the ratiometric value of F455/F634 and ALP concentrations ranging from 0.2 to 80 U·L- 1 was obtained, with a low detection limit of 0.1 U·L- 1. The ratiometric responses of the probe resulted in the visible fluorescence color change from orange red to blue with the increase of ALP concentration. The smartphone-based RGB recognition of the fluorescent sample images was used for ALP quantitative determination. A novel ratiometric fluorescent system based on Ce3+-CuNCs with AIE feature and CDs were constructed for efficient detection of ALP.

High-efficiency fluorescent coordination polymer nanoparticles co-doped with Ce3+/Tb3+ ions for curcumin detection.

Curcumin (Cur) possesses diverse biological and pharmacologic effects. It is widely used as a food additive and therapeutic medicine. A study to determine a sensitive detection method for Cur is necessary and meaningful. In this work, double rare earth ions co-doped fluorescent coordination polymer nanoparticles (CPNPs) were developed for the Cur detection. The CPNPs were synthesized by using adenosine monophosphate (AMP) as bridge ligands via coordination self-assembly with Ce3+ and Tb3+. The AMP-Ce/Tb CPNPs exhibited the characteristic green fluorescence of Tb3+ and had high luminescence efficiency. Under the optimal conditions, the fluorescence intensity of AMP-Ce/Tb CPNPs could be significantly quenched by Cur. The fluorescence quenching extent at λex/λem of 300 nm/544 nm showed a good linear relationship with the Cur concentration in the range of 10 to 1000 nM. The detection limit was as low as 8.0 nM (S/N = 3). This method was successfully applied to the determination of Cur in real samples with satisfactory results. The luminescence mechanism of AMP-Ce/Tb CPNPs and the fluorescence quenching mechanism of the CPNPs by Cur were both examined.

Photocatalytic degradation of amoxicillin and tetracycline by template synthesized nano-structured Ce3+@TiO2 thin film catalyst.

Contamination of the aquatic environment with pharmaceutical compounds is a serious environmental concern. The present investigation aims to utilize the Ce3+/TiO2 thin film catalyst to remove of potential antibiotics (amoxicillin and tetracycline) using the less harmful UV-A radiations. Reduced cerium ion-doped TiO2 is obtained by a simple one-step facile template method using polyethylene glycol as the templating agent. The synthesized catalysts Ce3+@TiO2 (non-template) and Ce3+@TiO2(T) (template) were characterized by spectroscopic methods. The XPS reaffirms the reduced Ce3+ dispersed within the titania network, and the AFM showed the surface roughness of the thin films. Detailed physicochemical analyses were conducted to deduce the degradation mechanism, and repeated use of the thin film photocatalyst showed enhanced stability. Significant mineralization of the antibiotics indicates the potential applicability of the photocatalytic catalyst. Furthermore, the presence of Ce3+ significantly restricted the recombination of electron/hole pairs in the photo-excited TiO2 semiconductor and showed enhanced photocatalytic degradation of the antibiotics proceeded predominantly through the •OH.

Ce3+ and Fe2+ co-enhanced ratiometric fluorescence probe utilizing copper nanoclusters and coumarin for sensitive assay of hydrogen peroxide and glucose.

A novel ratiometric fluorescent probe was constructed for sensitive assay of hydrogen peroxide (H2O2) and glucose, which utilized the synergistically enhanced effects of Ce3+ and Fe2+ on copper nanoclusters (CuNCs) and coumarin. In the CuNCs-Ce3+/Fe2+-coumarin system, Ce3+ triggered the aggregation-induced emission phenomenon of CuNCs, and Fe2+ catalyzed the Fenton reaction to efficiently yield hydroxyl radical (•OH). In the presence of H2O2, the 625-nm red fluorescence of CuNCs was sharply quenched owing to the oxidation of CuNCs to Cu(II) by •OH, but the 460-nm blue fluorescence of 7-hydroxycoumarin from the oxidation of coumarin by •OH dramatically increased. Based on the reversible changes in two fluorescence signals, a satisfactorily ratiometric probe was constructed for H2O2 assay with a detection limit (LOD) of 0.6 µM accompanied by a visual color variation from red to blue. For glucose assay, this ratiometric probe gave a linear range of 3.2-160 µM and LOD of 0.96 µM owing to the oxidization of glucose to yield H2O2 in the presence of glucose oxidase and O2. Overall, the newly developed ratiometric probe shows a great prospect in real applications for visual assay of H2O2 and glucose by our naked eyes.

Optical and structural properties of composites films based on Ce3+ -doped yttrium aluminium garnet nanoparticles embedded in polystyrene.

In the present work, attempts have been made to prepare scintillating nanoparticle composite films of Ce3+ -doped Y3 Al5 O12 (YAG:Ce) embedded in a polystyrene (PS) polymer. A YAG:Ce phosphor has been previously synthesized using the sol-gel method. YAG:Ce-PS composite films of 250 ± 30 µm thickness were prepared using a solvent casting procedure with different PS/solvent concentration and a different mass ratio between nanoparticles of YAG:Ce and PS. X-ray diffraction analysis confirmed that the YAG:Ce powders were successfully prepared. Using thermogravimetric analyses and differential scanning calorimetry, we found that the glass transition temperature (Tg) and thermal degradation were shifted to higher temperatures for composite films relative to pure PS. Photoluminescence showed the yellow emission of the Ce3+ -doped YAG phosphors, which was attributed to the 5d→4f transition of Ce3+ ion and the intensity of the emissions changed with the mass ratio of the YAG:Ce nanoparticles incorporated in the polymer and with the concentration of the polymer solution.

Defect Engineering on a Ti4O7 Electrode by Ce3+ Doping for the Efficient Electrooxidation of Perfluorooctanesulfonate.

Defect engineering in an electrocatalyst, such as doping, has the potential to significantly enhance its catalytic activity and stability. Herein, we report the use of a defect engineering strategy to enhance the electrochemical reactivity of Ti4O7 through Ce3+ doping (1-3 at. %), resulting in the significantly accelerated interfacial charge transfer and yielding a 37-129% increase in the anodic production of the hydroxyl radical (OH•). The Ce3+-doped Ti4O7 electrodes, [(Ti1-xCex)4O7], also exhibited a more stable electrocatalytic activity than the pristine Ti4O7 electrode so as to facilitate the long-term operation. Furthermore, (Ti1-xCex)4O7 electrodes were also shown to effectively mineralize perfluorooctanesulfonate (PFOS) in electrooxidation processes in both a trace-concentration river water sample and a simulated preconcentration waste stream sample. A 3 at. % dopant amount of Ce3+ resulted in a PFOS oxidation rate 2.4× greater than that of the pristine Ti4O7 electrode. X-ray photoelectron spectroscopy results suggest that Ce3+ doping created surficial oxygen vacancies that may be responsible for the enhanced electrochemical reactivity and stability of the (Ti1-xCex)4O7 electrodes. Results of this study provide insights into the defect engineering strategy for boosting the electrochemical performance of the Ti4O7 electrode with a robust reactivity and stability.

Luminescence of the near-ultraviolet blue-emitting Ba9 Al2 Si6 O24 :Ce3+ phosphor.

A near-ultraviolet (NUV) blue-emitting phosphor Ba9 Al2 Si6 O24 :Ce3+ (BAS:Ce3+ ) was synthesized using a high-temperature solid-state reaction. BAS:Ce3+ had an excitation band peak at about 328 nm and showed a blue emission band. The NUV-blue emission band had a peak at about 386 nm with a band width of about 60 nm, attributed to the 5d-4f transition of Ce3+ . Fluorescent decay showed an exponential model with a lifetime of 27.2 nsec. At 150°C, the luminescence intensity decreased to 68.7% compared with the intensity at room temperature.

Effects of Ceria Nanoparticles and CeCl3 on Plant Growth, Biological and Physiological Parameters, and Nutritional Value of Soil Grown Common Bean (Phaseolus vulgaris).

The release of metal ions may play an important role in toxicity of metal-based nanoparticles. In this report, a life cycle study is carried out in a greenhouse, to compare the effects of ceria nanoparticles (NPs) and Ce3+ ions at 0, 50, 100, and 200 mg Ce kg-1 on plant growth, biological and physiological parameters, and nutritional value of soil-grown common bean plants. Ceria NPs have a tendency to negatively affect photosynthesis, but the effect is not statistically significant. Ce3+ ionic treatments at 50, 100, and 200 mg Ce kg-1 result in increases of 1.25-, 0.66-, and 1.20-fold in stomatal conductance, respectively, relative to control plants. Both ceria NPs and Ce3+ ions disturb the homeostasis of antioxidant defense system in the plants, but only 200 mg Ce kg-1 ceria NPs significantly induce lipid peroxidation in the roots. Ceria NP treatments tend to reduced fresh weight and to increase mineral contents of the green pods, but have no effect on the organic nutrient contents. On the contrary, Ce3+ ion treatments modify the organic compositions and thus alter the nutritional quality and flavor of the green pods. These results suggest that the two Ce forms may have different mechanisms on common bean plants.

Reducing background absorbance via a double-lock strategy for detection of alkaline phosphatase and α-fetoprotein.

Lowering the background signal for more sensitive analysis of determinands is as important as amplifying the target signal. The photoinduced oxidase of fluorescein has been reported, which can catalyze the oxidization of common substrates in a few minutes. As a metaphor for locks and keys, we designed double locks confining the activity of fluorescein to reduce the background absorbance during colorimetric detection. The first lock inhibits the main activity of fluorescein by phosphating. The second lock almost completely deactivates fluorescein by forming coordination nanoparticles (CNPs) via the self-assembly of cerium chloride and fluorescein diphosphate (FDP). The Ce-FDP CNPs are characterized by scanning electron microscope (SEM), dynamic light scattering (DLS), Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectrum (EDS), which show electrostatic formation and amorphous character in the morphology. Alkaline phosphatase (ALP), the key to release fluorescein, can destroy Ce-FDP CNPs along with decomposing FDP by degrading phosphate groups. Therefore, a novel colorimetric strategy for sensitive detection of ALP is established. The detection of α-fetoprotein (AFP) is further succeeded by labeling AFP antibody with ALP. By dramatically reducing the background absorbance, the detection limits of ALP and AFP are as low as 0.014 mU/mL and 0.023 ng/mL, respectively. This convenient, brief, sensitive assay provides a promising prospect for clinical diagnosis. Graphical abstract.

Abundant Ce3+ Ions in Au-CeOx Nanosheets to Enhance CO2 Electroreduction Performance.

The electroreduction of CO2 to CO provides a potential way to solve the environmental problems caused by excess fossil fuel utilization. Loading transition metals on metal oxides is an efficient strategy for CO2 electroreduction as well as for reducing metal usage. However, it needs a great potential to overcome the energy barrier to increase CO selectivity. This paper describes how 8.7 wt% gold nanoparticles (NPs) loaded on CeOx nanosheets (NSs) with high Ce3+ concentration effectively decrease the overpotential for CO2 electroreduction. The 3.6 nm gold NPs on CeOx NSs containing 47.3% Ce3+ achieve CO faradaic efficiency of 90.1% at -0.5 V in 0.1 m KHCO3 solution. Furthermore, the CO2 electroreduction activity shows a strong relationship with the fractions of Ce3+ on Au-CeOx NSs, which has never been reported. In situ surface-enhanced infrared absorption spectroscopy shows that Au-CeOx NSs with high Ce3+ concentration promote CO2 activation and *COOH formation. Theoretical calculations also indicate that the improved performance is attributed to the enhanced *COOH formation on Au-CeOx NSs with high Ce3+ fraction.