RESUMEN
The facet chemistry of halide perovskite nanocrystals plays a key role in designing nanoscale epitaxial heterostructures. However, despite significant successes achieved in designing these nanocrystals, their heterostructures with several leading transition metals could not be established yet. Herein, the possible heterostructures of metals beyond transition metals are explored and the epitaxial combinations of soft CsPbBr3 nanocrystals with the post-transition metal Bi(0) are reported. These heterostructures are built with interfacing facets having hexagonal atomic configurations of both the rhombicuboctahedron CsPbBr3 and octahedral Bi(0). A high reaction temperature and the presence of alkylamine kept Bi(III) in reduced form and helped in sustaining these CsPbBr3-Bi(0) heteronanocrystals. Since understanding of and synthesis optimization of metal-halide perovskite heterostructures are limited, this finding adds a new fundamental insight in designing ionic and nonionic materials heterojunctions. Furthermore, oxidation and sulfidation of Bi(0) are studied, and the possible oxide/sulfide heterostructures with CsPbBr3 are discussed.
RESUMEN
The utilization of perovskite materials in flexible optoelectronics is experiencing distinct diversification including X-ray detection applications. Here, we report the oriented alignment of cesium lead bromide (CsPbBr3) single-crystal arrays on flexible polydimethylsiloxane (PDMS) substrates. By precisely confining the crystallization process within spatially delimited precursor droplets, we achieve a well-oriented crystal alignment through the spontaneous rotation of the CsPbBr3 microcuboids. This approach allows for precise control over the microcuboid morphologies by varying the growth temperature. We design flexible X-ray detector arrays by seamlessly integrating CsPbBr3 microcuboids with electrode arrays. The flexible X-ray detector can output a high sensitivity of 1.97 × 105 µC·Gyair-1·cm-2 and a low detection limit of 89 nGyair·s-1 after the surface passivation process. The excellent mechanical properties, outstanding X-ray detection capabilities, and high pixel uniformity are also demonstrated in conformal X-ray imaging of curved surfaces.
RESUMEN
To date, all-inorganic lead halide perovskite quantum dots have emerged as promising materials for photonic, optoelectronic devices, and biological applications, especially in solar cells, raising numerous concerns about their biosafety. Most of the studies related to the toxicity of perovskite quantum dots (PeQDs) have focused on the potential risks of hybrid perovskites by using zebrafish or human cells. So far, the neurotoxic effects and fundamental mechanisms of PeQDs remain unknown. Herein, a comprehensive methodology is designed to investigate the neurotoxicity of PeQDs by using Caenorhabditis elegans as a model organism. The results show that the accumulation of PeQDs mainly focuses on the alimentary system and head region. Acute exposure to PeQDs results in a decrease in locomotor behaviors and pharyngeal pumping, whereas chronic exposure to PeQDs causes brood decline and shortens lifespan. In addition, some abnormal issues occur in the uterus during reproduction assays, such as vulva protrusion, impaired eggs left in the vulva, and egg hatching inside the mother. Excessive reactive oxygen species formation is also observed. The neurotoxicity of PeQDs is explained by gene expression. This study provides a complete insight into the neurotoxicity of PeQD and encourages the development of novel nontoxic PeQDs.
Asunto(s)
Compuestos Inorgánicos , Nanopartículas , Óxidos , Titanio , Humanos , Femenino , Animales , Caenorhabditis elegans , Pez Cebra , Compuestos de Calcio/toxicidad , Nanopartículas/toxicidadRESUMEN
All-inorganic cesium lead halide (CsPbX3, X = Cl, Br, I) perovskite nanocrystals have drawn great interest because of their excellent photophysical properties and potential applications. However, their poor stability in water greatly limited their use in applications that require stable structures. In this work, a facile approach to stabilize CsPbBr3 nanowires is developed by using SU-8 as a protection medium; thereby creating stable CsPbBr3/SU-8 microstructures. Through photolithography and layer-by-layer deposition, CsPbBr3/SU-8 is used to fabricate bilayer achiral microswimmers (BAMs), which consist of a top CsPbBr3/SU-8 layer and a bottom Fe3O4 magnetic layer. Compared to pure CsPbBr3 nanowires, the CsPbBr3/SU-8 shows long-term structural and fluorescence stability in water against ultrasonication treatment. Due to the magnetic layer, the motion of the microswimmers can be controlled precisely under a rotating magnetic field, allowing them to swim at low Reynolds number and tumble or roll on surfaces. Furthermore, CsPbBr3/SU-8 can be used to fabricate various types of planar microstructures with high throughput, high consistency, and fluorescence properties. This work provides a method for the stabilization of CsPbBr3 and demonstrates the potential to mass fabricate planar microstructures with various shapes, which can be used in different applications such as microrobotics.
RESUMEN
High-precision, controllable, mass-producible assembly of nanoparticles into complex structures or devices holds immense importance in the application across various fields but it remains challenging. Here a highly controllable and reversible active assembly of colloidal CsPbBr3 nanorods, driven by an external electric field is achieved. This approach enables the nanorods dynamically orient themselves, assemble into chains, aggregate into columns, and eventually form an ordered column array, with the electric field intensity varying from 0 to 50 V µm-1 at 100 kHz. The nanorods inside the columns align parallel to the electric field, leading to a well-ordered structure. With the analysis of the interactions among the nanorods, a quantitative interpretation of the assembly is proposed. Monte Carlo calculation is also introduced to simulate the assembly process and the results prove to be in great agreement with the experimental observations. This electric field-driven assembly presents an exciting opportunity to pave the way for next-generation sensors and photonic devices based on well-developed colloidal nanoparticles.
RESUMEN
Silica is a promising shell coating material for colloidal nanoparticles due to its excellent chemical inertness and optical transparency. To encapsulate high-quality colloidal nanocrystals with silica shells, the silane coupling hydrolysis is currently the most effective approach. However, this reaction requires water, which often adversely affects the intrinsic physicochemical properties of nanocrystals. Achieving a damage-free silica encapsulation process to nanocrystals by hydrolysis is a huge challenge. Here, a novel strategy is developed to coat colloidal nanocrystals with a denser silica shell via a proactively water-generating reaction at high temperature. In this work, water molecules are continuously and proactively released into the reaction system through the amidation reaction, followed by in situ hydrolysis of silane, completely avoiding the impacts of water on nanocrystals during the silica coating process. In this work, water sensitive perovskite nanocrystals (CsPbBr3) are selected as the typical colloidal nanocrystals for silica coating. Notably, this high-temperature in situ encapsulation technology greatly improves the optical properties of nanocrystals, and the silica shells exhibit a denser structure, providing nanocrystals with better protection. This method overcomes the challenge of the influence of water on nanocrystals during the hydrolysis process, and provides an important reference for the non-destructive encapsulation of colloidal nanocrystals.
RESUMEN
Spiral inorganic perovskite nanowires (NWs) possess unique morphologies and properties that allow them highly attractive for applications in optoelectronic and catalytic fields. In popular solution-based synthesis methodology, however, challenges persist in simultaneously achieving precise and facile control over morphological twisting and fantastic carrier lifetimes. Here, a cooperative strategy of concurrently employing selective etching and ligand engineering is applied to facilitate the formation of spiral CsPbBr3 perovskite NWs with an ultralong carrier lifetime of ≈2 µs. Specifically, a novel amine of 1-(p-tolyl)ethanamine is introduced to functionalize as both a selective etchant and the source of forming an effective ligand to passivate the exposed facets, favoring the structural twisting and the enhancement of carrier lifetimes. The twisting behaviors are dependent on the etch ratios, which are essentially associated with the densities of grain boundaries and dislocations in the NWs. The ultralong carrier lifetime and long-term stability of the spiral NWs open up new possibilities for all-inorganic perovskites in optoelectronic and photocatalytic fields, while the cooperative synthesis strategy paves the way for exploring complex spiral structures with tunable morphology and functionality.
RESUMEN
Lead halide perovskite nanocrystals (LHP NCs) have garnered attention as promising light-harvesting materials for optoelectronics and photovoltaic devices, attributed to their impressive optoelectronic properties. However, their susceptibility to moisture-induced degradation has hindered their practical applications. Despite various encapsulation strategies, challenges persist in maintaining their stability and optoelectronic performance simultaneously. Here, a ligand exchange approach is proposed using (11-mercaptoundecyl)-N,N,N-trimethylammonium bromide (MUTAB) to enhance the stability and dispersibility of CsPbBr3 (CPB) NCs in aqueous environments. MUTAB enables effective surface passivation of the CPB NCs via robust Pb-S interactions at the S-terminal while concurrently directing water molecules through the unbound cationic N-terminal or vice versa, ensuring water dispersibility and stability. Spectroscopic analysis confirms retained structural and optical integrity post-ligand exchange. Crucially, MUTAB-bound CPB NCs exhibit sustained charge transfer properties, demonstrated by aqueous colloidal oxidation reactions. This ligand exchange strategy offers a promising pathway for advancing LHP NCs toward practical optoelectronic and photocatalytic applications.
RESUMEN
FAPbI3 perovskites have garnered considerable interest owing to their outstanding thermal stability, along with near-theoretical bandgap and efficiency. However, their inherent phase instability presents a substantial challenge to the long-term stability of devices. Herein, this issue through a dual-strategy of self-assembly 3D/0D quasi-core-shell structure is tackled as an internal encapsulation layer, and in situ introduction of excess PbI2 for surface and grain boundary defects passivating, therefore preventing moisture intrusion into FAPbI3 perovskite films. By utilizing this method alone, not only enhances the stability of the FAPbI3 film but also effectively passivates defects and minimizes non-radiative recombination, ultimately yielding a champion device efficiency of 23.23%. Furthermore, the devices own better moisture resistance, exhibiting a T80 lifetime exceeding 3500 h at 40% relative humidity (RH). Meanwhile, a 19.51% PCE of mini-module (5 × 5 cm2) is demonstrated. This research offers valuable insights and directions for the advancement of stable and highly efficient FAPbI3 perovskite solar cells.
RESUMEN
Addressing the challenge of lighting stability in perovskite white light emitting diodes (WLEDs) is crucial for their commercial viability. CsPbX3 (X = Cl, Br, I, or mixed) nanocrystals (NCs) are promising for next-generation lighting due to their superior optical and electronic properties. However, the inherent soft material structure of CsPbX3 NCs is particularly susceptible to the elevated temperatures associated with prolonged WLED operation. Additionally, these NCs face stability challenges in high humidity environments, leading to reduced lighting performance. This study introduces a two-step dual encapsulation method, resulting in CsPbBr3@SiO2/Al2SiO5 composite fibers (CFs) with enhanced optical stability under extreme conditions. In testing, WLEDs incorporating these CFs, even under prolonged operation at high power (100 mA for 9 h), maintain consistent electroluminescence (EL) intensity and optoelectronic parameters, with surface temperatures reaching 84.2 °C. Crucially, when subjected to 85 °C and 85% relative humidity for 200 h, the WLEDs preserve 97% of their initial fluorescence efficiency. These findings underscore the efficacy of the dual encapsulation strategy in significantly improving perovskite material stability, marking a significant step toward their commercial application in optoelectronic lighting.
RESUMEN
Halide perovskites (HPs) have gained significant interest in the scientific and technological sectors due to their unique optical, catalytic, and electrical characteristics. However, the HPs are prone to decomposition when exposed to air, oxygen, or heat. The instability of HP materials limits their commercialization, prompting significant efforts to address and overcome these limitations. Transition metal dichalcogenides, such as MoS2, are chemically stable and are suitable for electronic, optical, and catalytic applications. Moreover, it can be used as a protective media or shell for other nanoparticles. In this study, a novel CsPbBr3@MoS2 core-shell nanostructure (CS-NS) is successfully synthesized by enveloping CsPbBr3 within a MoS2 shell for the first time. Significant stability of CS-NSs dispersed in polar solvents for extended periods is also demonstrated. Remarkably, the hybrid CS-NS exhibits an absorption of MoS2 and quenching of the HP's photoluminescence, implying potential charge or energy transfer from HPs to MoS2. Using finite difference time domain simulations, it is found that the CS-NSs can be utilized to produce efficient solar cells. The addition of a MoS2 shell enhances the performance of CS-NS-based solar cells by 220% compared to their CsPbBr3 counterparts. The innovative CS-NS represents important progress in harnessing HPs for photovoltaic and optoelectronic applications.
RESUMEN
Metal halide perovskites (MHPs) have undergone rapid development in the fields of solar cells, light diodes, lasing, photodetectors, etc. However, the MHPs still face significant challenges, such as poor stability and heterocompositing with other functional materials at the single nanoparticle level. Herein, the successful synthesis of well-dispersed CsPbBr3@TiO2 heterostructure nanocrystals (NCs) is reported, in which each heterostructure NC has only one CsPbBr3 with a precise anatase TiO2 coating ranging from asymmetric to symmetric. Due to the protection of anatase TiO2, CsPbBr3 shows dramatically improved chemical stability and photostability. More significantly, the synthesized CsPbBr3@TiO2 heterostructure NCs form a type II heterojunction, which strongly promoted efficient photogenerated carrier separation between anatase TiO2 and CsPbBr3, hence leading to improved optoelectronic activity. This study provides a robust avenue for synthesizing stable and highly efficient MHPs@metal oxide heterostructure NCs, paving the way for the practical application of all inorganic perovskites.
RESUMEN
Water-hexane interfacial preparation of photostable Au@CsPbBr3 (Au@CPB) hybrid nanocrystals (NCs) from pure CsPbBr3 (CPB) NCs is reported, with the coexistence of exciton and localized surface plasmon resonance with equal dominance. This enables strong exciton-plasmon coupling in these plasmonic perovskite NCs where not only the photoluminescence is quenched intrinsically due to ultrafast charge separation, but also the light absorption property increases significantly, covering the entire visible region. Using a controlled interfacial strategy, a reversible chemical transformation between CPB and Au@CPB NCs is shown, with the simultaneous eruption of larger-size ligand-free aqueous Au nanoparticles (NPs). An adsorption-desorption mechanism is proposed for the reversible transformation, while the overgrowth reaction of the Au NPs passes through the Au aggregation intermediate. This study further shows that the plasmonic Au@CPB hybrid NCs as well as ligand-free Au NPs exhibit clear surface enhanced Raman scattering (SERS) effect of a commercially available probe molecule. Overall, the beautiful interfacial chemistry delivers two independent plasmonic materials, i.e., Au@CPB NCs and ligand-free aqueous Au NPs, which may find important implications in photocatalytic and biomedical applications.
RESUMEN
The growth kinetics of colloidal lead halide perovskite nanomaterials are an integral part of their applications, remains poorly understood due to complex nucleation processes and lack ofin situsize monitoring method. Here we demonstrated that absorption spectra can be used to observein situgrowth processes of ultrathin CsPbBr3nanowires in solution with reference to the effective mass infinite deep square potential well model. By means of this method, we have found that the ultrathin nanowires, fabricated by hot injection method, were firstly formed within one minute. Subsequently, they merge with each other into a thicker structure with increasing reaction time. We revealed that the nucleation, growth, and merging of the CsPbBr3nanowires are determined by the acid concentration and ligand chain length. At lower acidity, the critical nucleation size of the nanowire is smaller, while the shorter the ligand chain length, the faster the merging among the nanowires. Moreover, the merging mode between nanowires changed with their nucleation size. This growth kinetics of CsPbBr3nanowires provides a reference for optimizing the synthesis conditions to obtain the one-dimensional CsPbBr3with desired size, thus enabling accurate control of the nanowire shape.
RESUMEN
CsPbBr3quantum dots (QDs) have excellent optical properties and good phase stability, but the long-chain ligands on their surfaces affect the charge transfer between QDs. Here, we propose a simple ligand exchange strategy: solution-phase ligand exchange. By adding an acetone solution of phenylethylammonium bromide to the purification process of CsPbBr3QDs, the long-chain ligands were effectively replaced and the electric coupling between QDs was improved. As a result, the power conversion efficiency of the solar cell was increased from 1.95% to 2.83%. Meanwhile, the stability of the devices was significantly improved in the unencapsulated case.
RESUMEN
Silicon solar cell is the most mature photovoltaic conversion device, and in order to further improve the performance of the device, application of downshifting films has become a research hotspot. In this paper, CsPbBr3perovskite quantum dot/EVA composite adhesive film was prepared by melting method with CsPbBr3perovskite quantum dot film under solution processing as masterbatch and EVA particles as excipient. The effect of synthesis conditions on the luminescence properties of the composite films were thoroughly studied. The optimized CsPbBr3perovskite quantum dot/EVA composite adhesive film has excellent performance, and its light transmission reaches 85%. The CsPbBr3perovskite quantum dot/EVA composite adhesive film absolutely improves the efficiency of silicon solar cells by 1.08%, which is much higher than that of pure EVA adhesive film (0.63%). In addition, the device efficiencies have almost no change after 30 d in the air, maintaining the working stability of the device and contributing to industrial applications. This study provides a novel, industrial and low-cost synthesis route for the synthesis of CsPbBr3perovskite quantum dot/EVA composite adhesive film, which is expected to have broad application.
RESUMEN
Cesium lead bromide (CsPbBr3) perovskite nanocrystals are becoming a popular alternative to chalcogenide quantum dots because of their bright green fluorescence and high color purity. However, owing to the poor stability caused by their highly ionic nature and the dynamic binding of long-chain capping ligands, their practical applications are limited. Although (3-aminopropyl)triethoxysilane (APTES) is a frequently used insulating material for wrapping CsPbBr3nanocrystals, it often causes surface etching. To address this issue, we introduced oleic acid into the anti-solvent toluene to inhibit the etching effect of APTES using a modified room-temperature ligand-assisted reprecipitation process. We utilized in situ time-dependent photoluminescence measurements to study the formation kinetics of CsPbBr3nanocrystals and determine the optimal ligands ratio. This innovative approach enables precise control over CsPbBr3@SiO2nanoparticles synthesis, yielding uniformly shaped nanocrystals with a silica shell, a consistent size around 10.17 ± 1.6 nm, and enhanced photoluminescence quantum yields ranging from 90% and 100%. The photoluminescence lifetimes of our CsPbBr3@SiO2nanoparticles were significantly prolonged owing to a reduction in non-radiative recombination. This boosts their stability in thermal and polar solvent environments, making them superior candidates for use in photonic devices.
RESUMEN
By using the method of low-temperature crystallization, CsPbBr3 perovskite nanocrystals (PNCs) coated with trifluoroacetyl lysine (Tfa-Lys) and oleamine (Olam) were synthesized in aqueous solution. The structure of the CsPbBr3 PNCs was characterized by many methods, such as ultraviolet (UV)-visible absorption spectrophotometer, fluorescence spectrophotometer, transmission electron microscopy (TEM), and X-ray diffraction (XRD) pattern. The fluorescence emission of the CsPbBr3 PNCs is stable in water for about 1 day at room temperature. It was also found that the fluorescence of the PNCs could be obviously and selectively quenched after the addition of mercury ion (Hg2+ ), allowing a visual detection of Hg2+ by the naked eye under UV light illumination. The fluorescence quenching rate (I0 /I) has a good linear relationship with the addition of Hg2+ in the concentration range 0.075 to 1.5 mg/L, with a correlation coefficient (R2 ) of 0.997, and limit of detection of 0.046 mg/L. The fluorescence quenching mechanism of the PNCs was determined by the fluorescence lifetime and X-ray photoelectron spectroscopy (XPS) of the PNCs. Overall, the synthesis method for CsPbBr3 PNCs is simple and rapid, and the as-prepared PNCs are stable in water that could be conveniently used for selective detection of Hg2+ in the water environment.
Asunto(s)
Compuestos de Calcio , Mercurio , Nanopartículas , Titanio , Agua/química , Óxidos/química , Nanopartículas/químicaRESUMEN
A photoelectrochemical (PEC) immunosensor was designed based on MgIn2S4-decorated inorganic halide perovskite CsPbBr3 combined with the signal polarity conversion strategy for neuron-specific enolase (NSE) detection. CsPbBr3 was applied as the basic photoactive material owing to its excellent optical and electronic properties, which provide a good PEC performance for sensor construction. In order to improve the stability of this perovskite, the three-dimensional flower-like MgIn2S4 with a desirable direct band gap was applied to enhance the PEC response. Also, the excellent structure of MgIn2S4 provides large surface-active sites for CsPbBr3 loaded. For enhancing the detection sensitivity of PEC immunosensor, p-type CuInS2 was used as a signal probe which fixed on detection antibody (Ab2). When the target NSE was present, the photogenerated electrons produced by CuInS2 were transferred to the test solution, and the polarity of PEC signal changes. Based on the above photosensitive materials and signal conversion strategy, the proposed PEC immunosensor showed favorable detection performance, and the linear detection range is 0.0001 ~ 100 ng/mL with a 38 fg/mL of detection limit. The proposed strategy improved the adhibition of CsPbBr3 in the analytical chemistry field as well as provided a reference method for other protein detections.
Asunto(s)
Técnicas Biosensibles , Inmunoensayo , Fosfopiruvato Hidratasa , AnticuerposRESUMEN
The rampant hepatitis B virus (HBV) seriously endangers human health, and hepatitis B surface antigen (HBsAg) is its early diagnostic marker. Therefore, it is crucial to construct a fast and highly sensitive HBsAg detection method. Based on high-efficiency magnetic separation technology and fluorescent composite material labelling technology, an accurate, fast and sensitive fluorescent immunosensing system for HBsAg detection was developed. Immunomagnetic beads constructed from carboxyl-functionalized Fe3O4 nanoparticles (Fe3O4-COOH) with excellent magnetic response performance were used as efficient capture carriers for HBsAg. Immunofluorescence composite microspheres constructed based on ultra-stable polystyrene-coated CsPbBr3 perovskite nanocrystals (CPB@PSAA) with high hydrophilic properties, were excellent fluorescent markers for HBsAg. Using this sensitive sandwich fluorescence sensing system a good linear relationship within the range of 0.2-15 ng/mL was established between HBsAg concentration and fluorescence intensity with a limit of detection (LOD) of 0.05 ng/mL. The system obtained satisfactory results when tested on real human serum samples. The magnetic-assisted fluorescence immune-sandwich sensor system has broad application prospects in biomedicine such as rapid and early diagnosis and effective prevention of infectious diseases.