CMOS-compatible reconstructive spectrometers with self-referencing integrated Fabry-Perot resonators.

Miniaturized reconstructive spectrometers play a pivotal role in on-chip and portable devices, offering high-resolution spectral measurement through precalibrated spectral responses and AI-driven reconstruction. However, two key challenges persist for practical applications: artificial intervention in algorithm parameters and compatibility with complementary metal-oxide-semiconductor (CMOS) manufacturing. We present a cutting-edge miniaturized reconstructive spectrometer that incorporates a self-adaptive algorithm referenced with Fabry-Perot resonators, delivering precise spectral tests across the visible range. The spectrometers are fabricated with CMOS technology at the wafer scale, achieving a resolution of ~2.5 nm, an average wavelength deviation of ~0.27 nm, and a resolution-to-bandwidth ratio of ~0.46%. Our approach provides a path toward versatile and robust reconstructive miniaturized spectrometers and facilitates their commercialization.

Understanding the Nature of Vibro-Polaritonic States in Water and Heavy Water.

Very recent experiments on vibrational strong coupling tend to modify chemical reactivity, energy transfer, and many other physical properties of the coupled system. This is achieved without external stimuli and is very sensitive to the vibrational envelope. Water is an excellent vibrational oscillator, which is being used for similar experiments. However, the inhomogeneously broad OH/OD stretching vibrational band make it complicated to characterize the vibro-polaritonic states spectroscopically. In this paper, we performed vibrational strong coupling and mapped the evolution of vibro-polaritonic branches from low to high concentration of H2 O and measured the on-set of strong coupling. The refractive index dispersion is correlated with the cavity tuning experiments. These results are further compared with transfer matrix simulations. Simulated data deviate as noted in the dispersion spectra as the system enters into ultra-strong coupling due to enhanced self-dipolar interactions. Hopfield coefficients calculation shows that even at ±400 cm-1 detuning, the vibro-polaritonic states still possess hybrid characteristics. We systematically varied the concentration of H2 O and mapped the weak, intermediate, and strong coupling regimes to understand the role of inhomogeneously broad OH/OD stretching vibrational band. Our finding may help to better understand the role of H2 O/D2 O strong coupling in the recent polaritonic chemistry experiments.

Spatially selective narrow band and broadband absorption in Ag/SiO2/Ag based trilayer thin films by oblique angle deposition of SiO2layer.

We have experimentally demonstrated spatially selective absorption in Ag-SiO2-Ag based trilayer thin films by tuning the deposition angle of SiO2layer. These structures generate cavity resonance which can be tuned across the substrate locations due to spatially selective thickness and refractive index of silicon oxide (SiO2) film sandwiched between metallic silver (Ag) mirrors. Spatially selective property of SiO2film is obtained by oblique angle deposition technique using an electron beam evaporation system. The resonance wavelength of absorption in this trilayer structure shifts across the substrate locations along the direction of oblique deposition. The extent of shift in resonance increases with increase in angle of deposition of SiO2layer. 4.14 nm mm-1average shift of resonance wavelength is observed when SiO2is deposited at 40° whereas 4.76 nm mm-1average shift is observed when SiO2is deposited at 60°. We observed that the width of resonance increases with angle of deposition of the cavity layer and ultimately the resonant absorption disappears and becomes broadband when SiO2is deposited at glancing angle deposition (GLAD) configuration. Our study reveals that there is a suitable range of oblique angle of deposition from 40° to 60° for higher spatial tunability and resonant absorption whereas the absorption becomes broadband for glancing angle deposition.

Recent Progress in MEMS Fiber-Optic Fabry-Perot Pressure Sensors.

Pressure sensing plays an important role in many industrial fields; conventional electronic pressure sensors struggle to survive in the harsh environment. Recently microelectromechanical systems (MEMS) fiber-optic Fabry-Perot (FP) pressure sensors have attracted great interest. Here we review the basic principles of MEMS fiber-optic FP pressure sensors and then discuss the sensors based on different materials and their industrial applications. We also introduce recent progress, such as two-photon polymerization-based 3D printing technology, and the state-of-the-art in this field, e.g., sapphire-based sensors that work up to 1200 °C. Finally, we discuss the limitations and opportunities for future development.

Design of Mantis-Shrimp-Inspired Multifunctional Imaging Sensors with Simultaneous Spectrum and Polarization Detection Capability at a Wide Waveband.

The remarkable light perception abilities of the mantis shrimp, which span a broad spectrum ranging from 300 nm to 720 nm and include the detection of polarized light, serve as the inspiration for our exploration. Drawing insights from the mantis shrimp's unique visual system, we propose the design of a multifunctional imaging sensor capable of concurrently detecting spectrum and polarization across a wide waveband. This sensor is able to show spectral imaging capability through the utilization of a 16-channel multi-waveband Fabry-Pérot (FP) resonator filter array. The design incorporates a composite thin film structure comprising metal and dielectric layers as the reflector of the resonant cavity. The resulting metal-dielectric composite film FP resonator extends the operating bandwidth to cover both visible and infrared regions, specifically spanning a broader range from 450 nm to 900 nm. Furthermore, within this operational bandwidth, the metal-dielectric composite film FP resonator demonstrates an average peak transmittance exceeding 60%, representing a notable improvement over the metallic resonator. Additionally, aluminum-based metallic grating arrays are incorporated beneath the FP filter array to capture polarization information. This innovative approach enables the simultaneous acquisition of spectrum and polarization information using a single sensor device. The outcomes of this research hold promise for advancing the development of high-performance, multifunctional optical sensors, thereby unlocking new possibilities in the field of optical information acquisition.

Artery Pulse Waveform Acquired with a Fabry-Perot Interferometer.

For most patients admitted to a hospital, it is a requirement to continuously monitor their vital signs. Among these are the waveforms from ECG and the pulmonary arterial pulse. At present, there are several electronic devices that can measure the arterial pulse waveform. However, they can be affected by electromagnetic wave radiation, and the fabrication of electronic sensors is complicated and contributes to the e-waste, among other problems. In this paper, we propose an optical method to measure arterial pulse based on a Fabry-Perot interferometer composed of two mirrors. A pulse sensor formed by an acrylic cell with a thin membrane is used to gather the vasodilatation of the wrist, forming an air pulse that is enacted by means of a tube to a metallic cell containing a mirror that is glued to a thin silicone membrane. When the air pulse arrives, a displacement of the mirror takes place and produces a shift of the interference pattern fringes given by the Fabry-Perot. A detector samples the fringe intensity. With this method, an arterial pulse waveform is obtained. We characterize this optical device as a test of concept, and its application to measuring artery pulse is presented. The optical device is compared to other electronic devices.

1/f Noise Mitigation in an Opto-Mechanical Sensor with a Fabry-Pérot Interferometer.

Low-frequency and 1/f noise are common measurement limitations that arise in a variety of physical processes. Mitigation methods for these noises are dependent on their source. Here, we present a method for removing 1/f noise of optical origin using a micro-cavity Fabry-Pérot (FP) interferometer. A mechanical modulation of the FP cavity length was applied to a previously studied opto-mechanical sensor. It effectively mimics an up-conversion of the laser frequency, shifting signals to a region where lower white-noise sources dominate and 1/f noise is not present. Demodulation of this signal shifts the results back to the desired frequency range of observation with the reduced noise floor of the higher frequencies. This method was found to improve sensitivities by nearly two orders of magnitude at 1 Hz and eliminated 1/f noise in the range from 1 Hz to 4 kHz. A mathematical model for low-finesse FP cavities is presented to support these results. This study suggests a relatively simple and efficient method for 1/f noise suppression and improving the device sensitivity of systems with an FP interferometer readout.

Visual Strain Sensors Based on Fabry-Perot Structures for Structural Integrity Monitoring.

Strain sensors that can rapidly and efficiently detect strain distribution and magnitude are crucial for structural health monitoring and human-computer interactions. However, traditional electrical and optical strain sensors make access to structural health information challenging because data conversion is required, and they have intricate, delicate designs. Drawing inspiration from the moisture-responsive coloration of beetle wing sheaths, we propose using Ecoflex as a flexible substrate. This substrate is coated with a Fabry-Perot (F-P) optical structure, comprising a "reflective layer/stretchable interference cavity/reflective layer", creating a dynamic color-changing visual strain sensor. Upon the application of external stress, the flexible interference chamber of the sensor stretches and contracts, prompting a blue-shift in the structural reflection curve and displaying varying colors that correlate with the applied strain. The innovative flexible sensor can be attached to complex-shaped components, enabling the visual detection of structural integrity. This biomimetic visual strain sensor holds significant promise for real-time structural health monitoring applications.

Performance Study of F-P Pressure Sensor Based on Three-Wavelength Demodulation: High-Temperature, High-Pressure, and High-Dynamic Measurements.

F-P (Fabry-Perot) pressure sensors have a wide range of potential applications in high-temperature, high-pressure, and high-dynamic environments. However, existing demodulation methods commonly rely on spectrometers, which limits their application to high-frequency pressure signal acquisition. To solve this problem, this study developed a self-compensated, three-wavelength demodulation system composite with an F-P pressure sensor and a thermocouple to construct a comprehensive sensing system. The system produces accurate pressure measurements in high-temperature, high-pressure, and high-dynamic environments. In static testing at room temperature, the sensing system shows excellent linearity, and the pressure sensitivity is 158.48 nm/MPa. In high-temperature testing, the sensing system maintains high linearity in the range of 100 °C to 700 °C, with a maximum pressure-indication error of about 0.13 MPa (0~5 MPa). In dynamic testing, the sensor exhibits good response characteristics at 1000 Hz and 5000 Hz sinusoidal pressure frequencies, with a signal-to-noise ratio (SNR) greater than 37 dB and 45 dB, respectively. These results indicate that the sensing system proposed in this study has significant competitive advantages in the field of high-temperature, high-speed, and high-precision pressure measurements and provides an important experimental basis and theoretical support for technological progress in related fields.

Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature.

In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry-Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‱, -10.62 nm/MPa, and -0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.

ZIF-8-Based Surface Plasmon Resonance and Fabry-Pérot Sensors for Volatile Organic Compounds.

This work explores the use of ZIF-8, a metal-organic framework (MOF) material, for its use in the optical detection of volatile organic compounds (VOCs) in Fabry-Pérot and surface plasmon resonance (SPR)-based sensors. The experiments have been carried out with ethanol (EtOH) and show response times as low as 30 s under VOC-saturated atmospheres, and the estimated limit of detection is below 4000 ppm for both sensor types. The selectivity towards other VOCs is relatively poor, although the dynamics of adsorption/desorption differ for each VOC and could be used for selectivity purposes. Furthermore, the hydrophobicity of ZIF-8 has been confirmed and the fabricated sensors are insensitive to this compound, which is a very attractive result for its practical use in gas sensing devices.

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method.

Conventional optical fiber temperature/strain sensors often have to make compromises between the resolution and the dynamic range. Here we present a new method that meets the measurement requirements for both high resolution and large dynamic range. A high-quality optical fiber Fabry-Perot Interferometer (FPI) constructed using a pair of chirped fiber Bragg gratings is employed as the sensor and a dual-mode direct spectrum interrogation method is proposed to identify the small drift of external temperature or strain. As a proof-of-concept illustration, a temperature resolution of 0.2 °C within 30-130 °C is demonstrated. For strain sensing, the resolution can be 10 µÎµ within 0-1000 µÎµ. The measurement resolution can be improved further by routinely increasing the reflectivity of the CFBG and the cavity length and the sensor can also be mass-produced. This new sensing schema not only resolves the conflict between the resolution and the dynamic range of fiber-optic temperature/strain sensors but can also be extended to other sensors and measurands.

SiNx/SiO2-Based Fabry-Perot Interferometer on Sapphire for Near-UV Optical Gas Sensing of Formaldehyde in Air.

Fabry-Perot interferometers (FPIs), comprising foundry-compatible dielectric thin films on sapphire wafer substrates, were investigated for possible use in chemical sensing. Specifically, structures comprising two vertically stacked distributed Bragg reflectors (DBRs), with the lower DBR between a sapphire substrate and a silicon-oxide (SiO2) resonator layer and the other DBR on top of this resonator layer, were investigated for operation in the near-ultraviolet (near-UV) range. The DBRs are composed of a stack of nitride-rich silicon-nitride (SiNx) layers for the higher index and SiO2 layers for the lower index. An exemplary application would be formaldehyde detection at sub-ppm concentrations in air, using UV absorption spectroscopy in the 300-360 nm band, while providing spectral selectivity against the main interfering gases, notably NO2 and O3. Although SiNx thin films are conventionally used only for visible and near-infrared optical wavelengths (above 450 nm) because of high absorbance at lower wavelengths, this work shows that nitride-rich SiNx is suitable for near-UV wavelengths. The interplay between spectral absorbance, transmittance and reflectance in a FPI is presented in a comparative study between one FPI design using stoichiometric material (Si3N4) and two designs based on N-rich compositions, SiN1.39 and SiN1.49. Spectral measurements confirm that if the design accounts for phase penetration depth, sufficient performance can be achieved with the SiN1.49-based FPI design for gas absorption spectroscopy in near-UV, with peak transmission at 330 nm of 64%, a free spectral range (FSR) of 20 nm and a full-width half-magnitude spectral resolution (FWHM) of 2 nm.

Vibrational coupling with O-H stretching increases catalytic efficiency of sucrase in Fabry-Pérot microcavity.

Vibrational strong coupling (VSC) has been reported as a polariton-based method for modulating the rate of biochemical reactions. Herein, we studied how VSC modulates the sucrose hydrolysis. By monitoring the refractive index-induced shift of Fabry-Pérot microcavity, in which the catalytic efficiency of sucrose hydrolysis can be increased at least two times, as VSC was tuned to resonate with the stretching vibration of O-H bonds. This research provides new evidence for applying VSC in life sciences, which holds great promise to improving enzymatic industries.

Fabry-Perot Cavity Control for Tunable Raman Scattering.

The Fabry-Perot (FP) resonator is an intuitive and versatile optical structure owing to its uniqueness in light-matter interactions, yielding resonance with a wide range of wavelengths as it couples with photonic materials encapsulated in a dielectric cavity. Leveraging the FP resonator for molecular detection, a simple geometry of the metal-dielectric-metal structure is demonstrated to allow tuning of the enhancement factors (EFs) of surface-enhanced Raman scattering (SERS). The optimum near-field EF from randomly dispersed gold nano-gaps and dynamic modulation of the far-field SERS EF by varying the optical resonance of the FP etalon are systematically investigated by performing computational and experimental analyses. The proposed strategy of combining plasmonic nanostructures with FP etalons clearly reveals wavelength matching of FP resonance to excitation and scattering wavelengths plays a key role in determining the magnitude of the SERS EF. Finally, the optimum near-field generating optical structure with controlled dielectric cavity is suggested for a tunable SERS platform, and its dynamic SERS switching performance is confirmed by demonstrating information encryption through liquid immersion.

Far-field midinfrared superresolution imaging and spectroscopy of single high aspect ratio gold nanowires.

Limited approaches exist for imaging and recording spectra of individual nanostructures in the midinfrared region. Here we use infrared photothermal heterodyne imaging (IR-PHI) to interrogate single, high aspect ratio Au nanowires (NWs). Spectra recorded between 2,800 and 4,000 cm-1 for 2.5-3.9-µm-long NWs reveal a series of resonances due to the Fabry-Pérot modes of the NWs. Crucially, IR-PHI images show structure that reflects the spatial distribution of the NW absorption, and allow the resonances to be assigned to the m = 3 and m = 4 Fabry-Pérot modes. This far-field optical measurement has been used to image the mode structure of plasmon resonances in metal nanostructures, and is made possible by the superresolution capabilities of IR-PHI. The linewidths in the NW spectra range from 35 to 75 meV and, in several cases, are significantly below the limiting values predicted by the bulk Au Drude damping parameter. These linewidths imply long dephasing times, and are attributed to reduction in both radiation damping and resistive heating effects in the NWs. Compared to previous imaging studies of NW Fabry-Pérot modes using electron microscopy or near-field optical scanning techniques, IR-PHI experiments are performed under ambient conditions, enabling detailed studies of how the environment affects mid-IR plasmons.

Developing a Novel Terahertz Fabry-Perot Microcavity Biosensor by Incorporating Porous Film for Yeast Sensing.

We present a novel terahertz (THz) Fabry-Perot (FP) microcavity biosensor that uses a porous polytetrafluoroethylene (PTFE) supporting film to improve microorganism detection. The THz FP microcavity confines and enhances fields in the middle of the cavity, where the target microbial film is placed with the aid of a PTFE film having a dielectric constant close to unity in the THz range. The resonant frequency shift increased linearly with increasing amount of yeasts, without showing saturation behavior under our experimental conditions. These results agree well with finite-difference time-domain (FDTD) simulations. The sensor's sensitivity was 11.7 GHz/µm, close to the optimal condition of 12.5 GHz/µm, when yeast was placed at the cavity's center, but no frequency shift was observed when the yeast was coated on the mirror side. We derived an explicit relation for the frequency shift as a function of the index, amount, and location of the substances that is consistent with the electric field distribution across the cavity. We also produced THz transmission images of yeast-coated PTFE, mapping the frequency shift of the FP resonance and revealing the spatial distribution of yeast.

Fiber Optic Impact Location System Based on a Tracking Tandem Low-Coherence Interferometer.

This study proposes a method for detecting small-length fluctuations for fiber-optic sensors (FOS). The method is based on a tracking tandem low-coherence interferometer and enables the ability to compensate for temperature and deformation drifts in FOS. As a result, the constant high sensitivity of FOS over a wide frequency range is guaranteed. Sensitivity to the level of 2 nm in the frequency range of 200 kHz has been demonstrated. The operation of the circuit is demonstrated on the example of the 2D location of acoustic signals using a correlation algorithm for signal processing, known as the time reversal method. It is shown that this system enables us to determine the place of the impact on the sample under the test with an accuracy of about 2 cm using a single sensor.

Fabry-Perot Cavity Optimization for Absolute Strain Sensing Using Finite Element Analysis.

The finite element method (FEM) was used to investigate the optical-mechanical behavior of a Fabry-Perot Interferometer (FPI) composed of a capillary segment spliced between two sections of standard optical fiber. The developed FEM model was validated by comparing it with theory and with previously published experimental data. The model was then used to show that the absolute strain on the host substrate is usually smaller than the strain measurement obtained with the sensor. Finally, the FEM model was used to propose a cavity geometry that can be produced with repeatability and that yields the correct absolute strain experienced by the host substrate, without requiring previous strain calibration.

Sequential Dual Coating with Thermosensitive Polymers for Advanced Fiber Optic Temperature Sensors.

We systematically designed dual polymer Fabry-Perrot interferometer (DPFPI) sensors, which were used to achieve highly sensitive temperature sensors. The designed and fabricated DPFPI has a dual polymer coating layer consisting of thermosensitive poly (methyl methacrylate) (PMMA) and polycarbonate (PC) polymers. Four different DPFPI sensors were developed, in which different coating optical path lengths and the resultant optical properties were generated by the Vernier effect, changing the sequence of the applied polymers and varying the concentration of the coating solutions. The experimental results confirmed that the PC_PMMA_S1 DPFPI sensor delivered a temperature sensitivity of 1238.7 pm °C-1, which was approximately 4.4- and 1.4-fold higher than that of the PMMA and PMMA_PC_S1-coated sensor, respectively. Thus, the results reveal that the coating sequence, the compact thickness of the dual polymer layers, and the resultant optical parameters are accountable for achieving sensors with high sensitivity. In the PC_ PMMA-coated sensor, the PMMA outer layer has comparatively better optical properties than the PC, which might produce synergistic effects that create a large wavelength shift with small temperature deviations. Therefore, it is considered that the extensive results with the PC_PMMA_S1 DPFPI sensor validate the efficacy, repeatability, reliability, quick reaction, feasibility, and precision of the temperature readings.