Controlled Synthesis of SnO2 Nanostructures as Alloy Anode via Restricted Potential Toward Building High-Performance Dual-Ion Batteries with Graphite Cathode.

Dual-ion batteries (DIBs) are considered one of the promising energy storage devices in which graphite serves as a bi-functional electrode, i.e., anode and cathode in the aprotic organic solvents. Unlike conventional lithium-ion batteries (LIBs), DIBs reversibly store the cations and anions in the anode and cathodes during redox reactions, respectively. The electrolyte is a source for both cations and anions, so the choice of electrolyte plays a vital role. In the present work, the synthesis of SnO2 nanostructures is reported as a possible alternative for graphite anode, and the Li-storage performance is optimized in half-cell (Li/SnO2 ) assembly with varying amounts of conductive additive (acetylene black) and limited working potential (1 V vs Li). Finally, a DIB using recovered graphite (RG) fabricated from spent LIB as a cathode and SnO2 nanostructures as an anode under balanced loading conditions. Prior to the fabrication, both electrodes are pre-cycled to eliminate irreversibility. An in-situ impedance study has been employed to validate the passivation layer formation during the charge-discharge process. The high-performance SnO2 /RG-based DIB delivered a maximum discharge capacity of 380 mAh g-1 . The electrochemical performance of DIB has been assessed by varying temperature conditions to evaluate their suitability in different climatic conditions.

Preparation of carbon-coated Fe2 O3 @Ti3 C2 Tx composites by mussel-like modifications as high-performance anodes for lithium-ion batteries.

Fe2 O3 with high theoretical capacity (1007 mA h g-1 ) and low cost is a potential anode material for lithium-ion batteries (LIBs), but its practical application is restricted by its low electrical conductivity and large volume changes during lithiation/delithiation. To solve these problems, Fe2 O3 @Ti3 C2 Tx composites were synthesized by a mussel-like modification method, which relies on the self-polymerization of dopamine under mild conditions. During polymerization, the electronegative group (-OH) on dopamine can easily coordinate with Fe3+ ions as well as form hydrogen bonds with the -OH terminal group on the surface of Ti3 C2 Tx , which induces a uniform distribution of Fe2 O3 on the Ti3 C2 Tx surface and mitigates self-accumulation of MXene nanosheets. In addition, the polydopamine-derived carbon layer protects Ti3 C2 Tx from oxidation during the hydrothermal process, which can further improve the electrical conductivity of the composites and buffer the volume expansion and particle agglomeration of Fe2 O3 . As a result, Fe2 O3 @Ti3 C2 Tx anodes exhibit ~100 % capacity retention with almost no capacity loss at 0.5 A g-1 after 250 cycles, and a stable capacity of 430 mA h g-1 at 2 A g-1 after 500 cycles. The unique structural design of this work provides new ideas for the development of MXene-based composites in energy storage applications.

In-Situ Lithium Analysis In MgLi Alloys Using Laser-Induced Breakdown Spectroscopy with a Compact Chamber.

This study explores the feasibility of in situ Lithium (Li) analysis in Magnesium-Lithium (MgLi) alloys using Laser-Induced Breakdown Spectroscopy (LIBS). It focuses on two Li emission lines: Li I 670.8 nm (resonance) and Li I 610.4 nm (non-resonance). Comparing characteristics at atmospheric and low pressures, self-reversal signatures are observed in both emission lines at atmospheric pressure, complicating the analysis. Challenges in suppressing self-reversal effect using laser energy and detection window adjustments are noted. To address this, a compact chamber (80 mm×50 mm×50 mm) with adjustable pressure (using a portable vacuum pump) is developed. Lowering the pressure significantly reduces self-reversal effect, particularly for the Li I 610.4 nm line. This makes Li I 610.4 nm more suitable for analyzing high Lithium concentrations in MgLi alloys. Using standard samples, such as LA91 (8 % Li) and LA141 (14 % Li), the study successfully obtains Li I 610.4 nm spectra with proportional Li emission intensities. Even with a commercially affordable time-integrated charge-coupled device (CCD) detection system, the results indicate the efficacy of this approach for in situ Li analysis in MgLi alloys.

Recent Advances of Transition Metal Dichalcogenides-Based Materials for Energy Storage Devices, in View of Monovalent to Divalent Ions.

The fast growth of electrochemical energy storage (EES) systems necessitates using innovative, high-performance electrode materials. Among the various EES devices, rechargeable batteries (RBs) with potential features like high energy density and extensive lifetime are well suited to meet rapidly increasing energy demands. Layered transition metal dichalcogenides (TMDs), typical two dimensional (2D) nanomaterial, are considered auspicious materials for RBs because of their layered structures and large specific surface areas (SSA) that benefit quick ion transportation. This review summarizes and highlights recent advances in TMDs with improved performance for various RBs. Through novel engineering and functionalization used for high-performance RBs, we briefly discuss the properties, characterizations, and electrochemistry phenomena of TMDs. We summarised that engineering with multiple techniques, like nanocomposites used for TMDs receives special attention. In conclusion, the recent issues and promising upcoming research openings for developing TMDs-based electrodes for RBs are discussed.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity.

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Analysis of microscopy techniques to measure segregation in continuous-cast steel slabs.

The accurate characterisation of centreline segregation requires precise measurements of composition variations over large length scales (10 - 1 $^{-1}$ m ${\rm {m}}$ ) across the centreline of the cast product, while having high resolution, sufficient to quantify the significant composition variations between dendrites due to microsegregation at very small length scales (10 - 5 m $^{-5}{\rm {m}}$ ). This study investigates the potential of a novel microscopy technique, named Synchrotron Micro X-ray Flurorescence (SMXRF), to generate large-scale high-resolution segregation maps from a steel sample taken from a thin slab caster. Two methods, Point Analysis and Regression Analysis, are proposed for SMXRF data calibration. By comparing with the traditional Laser-Induced Breakdown Spectroscopy (LIBS), and Electron Probe Micro Analyser (EPMA) techniques, we show that SMXRF is successful in quantitative characterisation of centreline segregation. Over large areas (e.g. 12 × $\times$ 16 mm 2 ${\rm {mm}}^2$ ) and at high resolution (10-50 µ m $\mu\text{m}$ pixel size) various techniques yield comparable outcomes in terms of composition maps and solute profiles. The findings also highlight the importance of both high spatial resolution and large field of view to have a quantitative, accurate, and efficient measurement tool to investigate segregation phenomena.

Rational design of waste anode graphite-derived carbon catalyst to activate peroxymonosulfate for atrazine degradation.

As the rapidly growing number of waste lithium-ion batteries (LIBs), the recycling and reutilization of anode graphite is of increasing interest. Converting waste anode graphite into functional materials may be a sensible option. Herein, a series of carbonaceous catalysts (TG) were successfully prepared using spent anode graphite calcined at various temperatures and applied for activating peroxymonosulfate (PMS) to degrade atrazine (ATZ). The catalyst obtained at 800 °C (TG-800) showed the optimum performance for ATZ removal (99.2% in 6 min). Various experimental conditions were explored to achieve the optimum efficiency of the system. In the TG-800/PMS system, free radicals (e.g., SO4·-, HO·), singlet oxygen (1O2), together with a direct electron transfer pathway all participated in ATZ degradation, and the ketonic (CO) group was proved as the leading catalytic site for PMS activation. The potential degradation routes of ATZ have also been presented. According to the toxicity assessment experiments, the toxicity of the intermediate products decreased. The reusability and universal applicability of the TG-800 were also confirmed. This research not only provides an efficient PMS activator for pollutant degradation, but also offers a meaningful reference for the recovery of waste anode graphite to develop environmentally functional materials.

Opportunity and challenges in recovering and functionalizing anode graphite from spent lithium-ion batteries: A review.

Recent concerns have emerged regarding the improper disposal of spent lithium-ion batteries (LIBs), which has garnered widespread societal attention. Graphite materials accounted for 12-21 wt % of LIBs' mass, typically contain heavy metals, binders, and residual electrolytes. Regenerating spent graphite not only alleviated the shortage of plumbago, but also contributed to the supports environmental protection as well as national carbon peak and neutrality ("dual carbon" goals). Despite significant advancements in recycling spent LIBs had been made, a comprehensive overview of the processes for pretreatment, regeneration, and functionalization of spent graphite from retired LIBs, along with the associated technical standards and industry regulations enabling their smooth implementation still needed to be mentioned. Hence, we conducted the following research work. Firstly, the pre-treatment process of spent graphite, including discharging, crushing, and screening was summed up. Next,. Subsequently, graphite recovery methods, such as acid leaching, pyrometallurgy, and combined methods were summarized. Moreover, the modification and doping approach was used to enhance the electrochemical properties of graphite. Afterwards, we reviewed the functionalization of anode graphite from an economically and environmentally friendly view. Meanwhile, the technical standards and industry regulations of spent LIBs in domestic and oversea industries were described. Finally, we provided an overview of the technical challenges and development bottlenecks in graphite recycling, along with future prospects Overall, this study outlined the opportunities and challenges in recovering and functionalizing of anode materials via a efficient and sustainable processes.

Magnetic microbead-based upconversion immunoassay with laser-induced breakdown spectroscopy readout for the detection of prostate-specific antigen.

Laser-induced breakdown spectroscopy (LIBS) is a promising technique for the readout of immunochemical assays utilizing indirect detection of labels (Tag-LIBS), typically based on nanoparticles. We have previously demonstrated that Tag-LIBS immunoassay employing yttrium-based photon-upconversion nanoparticles (UCNPs) can reach sensitivity similar to commonly used enzyme and fluorescence immunoassays. In this study, we report on further increasing the sensitivity of UCNP-based Tag-LIBS immunoassay by employing magnetic microbeads (MBs) as the solid phase in the determination of cancer biomarker prostate-specific antigen. Due to the possibility of analyte preconcentration, MBs enabled achieving a limit of detection (LOD) of 4.0 pg·mL-1, representing two orders of magnitude improvement compared with equivalent microtiter plate-based assay (LOD of 460 pg·mL-1). In addition, utilizing MBs opens up the possibility of an internal standardization of the LIBS readout by employing iron spectral lines, which improves the assay robustness by compensating for LIBS signal fluctuations and bead-bound immunocomplexes lost throughout the washing steps. Finally, the practical applicability of the technique was confirmed by the successful analysis of clinical samples, showing a strong correlation with the standard electrochemiluminescence immunoassay. Overall, MB-based Tag-LIBS was confirmed as a promising immunoassay approach, combining fast readout, multiplexing possibilities, and high sensitivity approaching upconversion luminescence scanning while avoiding the requirement of luminescence properties of labels.

Technology Selection for Inline Topography Measurement with Rover-Borne Laser Spectrometers.

This work studies enhancing the capabilities of compact laser spectroscopes integrated into space-exploration rovers by adding 3D topography measurement techniques. Laser spectroscopy enables the in situ analysis of sample composition, aiding in the understanding of the geological history of extraterrestrial bodies. To complement spectroscopic data, the inclusion of 3D imaging is proposed to provide unprecedented contextual information. The morphological information aids material characterization and hence the constraining of rock and mineral histories. Assigning height information to lateral pixels creates topographies, which offer a more complete spatial dataset than contextual 2D imaging. To aid the integration of 3D measurement into future proposals for rover-based laser spectrometers, the relevant scientific, rover, and sample constraints are outlined. The candidate 3D technologies are discussed, and estimates of performance, weight, and power consumptions guide the down-selection process in three application examples. Technology choice is discussed from different perspectives. Inline microscopic fringe-projection profilometry, incoherent digital holography, and multiwavelength digital holography are found to be promising candidates for further development.

A Novel LIBS Sensor for Sample Examinations on a Crime Scene.

In this work, we present a compact LIBS sensor developed for characterization of samples on a crime scene following requirements of law enforcement agencies involved in the project. The sensor operates both in a tabletop mode, for aside measurements of swabbed materials or taken fragments, and in handheld mode where the sensor head is pointed directly on targets at the scene. The sensor head is connected via an umbilical to an instrument box that could be battery-powered and contains also a color camera for sample visualization, illumination LEDs, and pointing system for placing the target in focus. Here we describe the sensor's architecture and functionalities, the optimization of the acquisition parameters, and the results of some LIBS measurements. On nano-plotted traces at silica wafer and in optimized conditions, for most of the elements the detection limits, in term of the absolute element masses, were found to be below 10 picograms. We also show results obtained on some representative materials, like fingerprints, swabbed soil and gunshot residue, varnishes on metal, and coated plastics. The last, solid samples were used to evaluate the depth profiling capabilities of the instrument, where the recognition of all four car paint layers was achieved.

A highly efficient process to enhance the bioleaching of spent lithium-ion batteries by bifunctional pyrite combined with elemental sulfur.

Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS2) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S0) or FeSO4 on metals bioleaching from spent LIBs. Results demonstrated that the bioleaching efficiency was significantly higher in the leaching system constructed with FeS2 + S0, than in the FeS2 + FeSO4 or FeS2 system. When the pulp densities of FeS2, S0 and spent LIBs were 10 g L-1, 5 g L-1 and 10 g L-1, respectively, the leaching efficiency of Li, Ni, Co and Mn all reached 100%. Mechanistic analysis reveals that in the FeS2 + S0 system, the activity and acid-producing capabilities of iron-sulfur oxidizing bacteria were enhanced, promoting the generation of Fe (Ⅱ) and reducible sulfur compounds. Simultaneously, bio-acids were shown to disrupt the structure of the LIBs, thereby increasing the contact area between Fe (Ⅱ) and sulfur compounds containing high-valence metals. This effectively promoted the reduction of high-valence metals, thereby enhancing their leaching efficiency. Overall, the FeS2 + S0 bioleaching process constructed in this study, improved the leaching efficiency of LIBs while also effectively utilizing waste, providing technical support for the comprehensive and sustainable management of solid waste.

A greener method to recover critical metals from spent lithium-ion batteries (LIBs): Synergistic leaching without reducing agents.

Efficient recycling of critical metals from spent lithium-ion batteries is vital for clean energy and sustainable industry growth. Conventional methods often fail to manage large waste volumes, leading to hazardous gas emissions and dangerous materials. This study investigates innovative methods for recovering critical metals from spent LIBs using synergistic leaching. The first step optimized thermal treatment conditions (570 °C for 2 h in air) to remove binder materials while maintaining cathode material crystallinity, confirmed by X-ray diffraction (XRD) analysis. Next, response surface methodology (RSM), I-optimal, was used to examine the synergistic effects of sulfuric acid (SA) and organic acids (Org, citric and acetic acids) and their concentrations (SA: 0.5-2 M and Org: 0.1-2 M) on metal leaching for an eco-friendlier process. Results showed that adding citric acid to SA was more effective, especially at lower concentrations, than using acetic acid. The medium was tested to evaluate the impact of reductant addition. Remarkably, it was discovered that the optimized leaching mixture (1.25 M SA and 0.55 M citric acid) efficiently extracted metals without the need for any reductant like H2O2, highlighting its potential for a simpler and more eco-friendly recycling process. Further optimization identified the ideal solid-to-liquid ratio (62.5 g/L) to minimize acid use. Finally, RSM (D-optimal) was used to investigate the effects of time and temperature on leaching, achieving remarkable recovery rates of 99% ± 0.7 for Li, 98% ± 0.0 for Co, 90% ± 6.6 for Ni, and 92% ± 0.4 for Mn under optimized conditions at 189 min and 95 °C. Chemical cost analysis revealed this method is about 25% more cost-effective than conventional methods.

Classification of e-waste using machine learning-assisted laser-induced breakdown spectroscopy.

Waste management and the economy are intertwined in various ways. Adopting sustainable waste management techniques can contribute to economic growth and resource conservation. Artificial intelligence (AI)-based classification is very crucial for rapid and contactless classification of metals in electronic waste (e-waste) management. In the present research work, five types of aluminium alloys, because of their extensive use in structural, electrical and thermotechnical functions in the electronics industry, were taken. Laser-induced breakdown spectroscopy (LIBS), a spectral identifier technique, was employed in conjunction with machine learning (ML) classification models of AI. Principal component analysis (PCA), an unsupervised ML classifier, was found incapable to differentiate LIBS data of alloys. Supervised ML classifier was then trained (for 10-fold cross-validation) on randomly selected 80% and tested on 20% spectral data of each alloy to assess classification capacity of each. In most of the tested variants of K nearest neighbour (kNN) the resulting accuracy was lower than 30% but kNN ensembled with random subspace method showed improved accuracy up to 98%. This study revealed that an AI-based LIBS system can classify e-waste alloys rather effectively in a non-contactless mode and could potentially be connected with robotic systems, hence, minimizing manual labour.

Boosting Thermal and Mechanical Properties: Achieving High-Safety Separator Chemically Bonded with Nano TiN Particles for High Performance Lithium-Ion Batteries.

Currently, the commercial separator (Celgard2500) of lithium-ion batteries (LIBs) suffers from poor electrolyte affinity, mechanical property and thermal stability, which seriously affect the electrochemical performances and safety of LIBs. Here, the composite separators named PVDF-HFP/TiN for high-safety LIBs are synthesized. The integration of PVDF-HFP and TiN forms porous structure with a uniform and rich organic framework. TiN significantly improves the adsorption between PVDF-HFP and electrolyte, causing a higher electrolyte absorption rate (192%). Meanwhile, XPS results further demonstrate the tight link between PVDF-HFP and TiN due to the existence of TiF bond in PVDF-HFP/TiN, resulting in a strong impediment for the puncture of lithium dendrites as a result of the improved mechanical strengths. And PVDF-HFP/TiN can effectively suppress the growth of lithium dendrites by means of uniform lithium flux. In addition, the excellent heat resistance of TiN improves the thermal stability of PVDF-HFP/TiN. As a result, the LiFePO4 ||Li cells assembled PVDF-HFP/TiN-12 exhibit excellent specific capacity, rate performance, and capacity retention rate. Even the high specific capacity of 153 mAh g-1 can be obtained at the high temperature of 80 °C. Meaningfully, a reliable modification strategy for the preparation of separators with high safety and electrochemical performance in LIBs is provided.

Carbonized Polymer Dots for Controlling Construction of MoS2 Flower-Like Nanospheres to Achieve High-Performance Li/Na Storage Devices.

Despite being one of the most promising materials in anode materials, molybdenum sulfide (MoS2 ) encounters certain obstacles, such as inadequate cycle stability, low conductivity, and unsatisfactory charge-discharge (CD) rate performance. In this study, a novel approach is employed to address the drawbacks of MoS2 . Carbon polymer dots (CPDs) are incorporated to prepare three-dimensional (3D) nanoflower-like spheres of MoS2 @CPDs through the self-assembly of MoS2 2D nanosheets, followed by annealing at 700 °C. The CPDs play a main role in the creation of the nanoflower-like spheres and also mitigate the MoS2 nanosheet limitations. The nanoflower-like spheres minimize volume changes during cycling and improve the rate performance, leading to exceptional rate performance and cycling stability in both Lithium-ion and Sodium-ion batteries (LIBs and SIBs). The optimized MoS2 @CPDs-2 electrode achieves a superb capacity of 583.4 mA h g-1 at high current density (5 A g-1 ) after 1000 cycles in LIBs, and the capacity remaining of 302.8 mA h g-1 after 500 cycles at 5 A g-1 in SIBs. Additionally, the full cell of LIBs/SIBs exhibits high capacity and good cycling stability, demonstrating its potential for practical application in fast-charging and high-energy storage.

Acetylene-Mediated Borophosphene Dirac Materials as Efficient Anode Materials for Lithium-Ion Batteries.

Generally, graphynes have been generated by the insertion of acetylenic content (-C≡C-) in the graphene network in different ratios. Also, several aesthetically pleasing architectures of two-dimensional (2D) flatlands have been reported with the incorporation of acetylenic linkers between the heteroatomic constituents. Prompted by the experimental realization of boron phosphide, which has provided new insights on the boron-pnictogen family, we have modelled novel forms of acetylene-mediated borophosphene nanosheets by joining the orthorhombic borophosphene stripes with different widths and with different atomic constituents using acetylenic linkers. Structural stabilities and properties of these novel forms have been assessed using first-principles calculations. Investigation of electronic band structure elucidates that all the novel forms show the linear band crossing closer to the Fermi level at Dirac point with distorted Dirac cones. The linearity in the hole and electronic bands impose the high Fermi velocity to the charge carriers close to that of graphene. Finally, we have also unravelled the propitious features of acetylene-mediated borophosphene nanosheets as anodes in Li-ion batteries.

Effect of intercalated molybdenum atoms on structure and electrochemical properties of Mo1+xS2synthesized by hydrothermal method.

As an alternative anode to graphene, molybdenum disulfide (MoS2) has attracted much attention due to its layered structure and high specific capacity. Moreover, MoS2can be synthesized by hydrothermal method with low cost and the size of its layer spacing can be controlled. In this work, the results of experiment and calculation proved that the presence of intercalated Mo atoms, leading to the expansion of MoS2layer spacing and weakening of Mo-S bonding. For the electrochemical properties, the presence of intercalated Mo atoms causes the lower reduction potentials for the Li+intercalation and Li2S formation. In addition, the effective reduction of diffusion resistance and charge transfer resistance in Mo1+xS2leads to the acquisition of high specific capacity for battery applications.

In situconstruction of N-doped Ti3C2Txconfined worm-like Fe2O3nanoparticles by Fe-O-Ti bonding for LIBs anode with superior cycle performance.

The development of Fe2O3as lithium-ion batteries (LIBs) anode is greatly restricted by its poor electronic conductivity and structural stability. To solve these issues, this work presentsin situconstruction of three-dimensional crumpled Fe2O3@N-Ti3C2Txcomposite by solvothermal-freeze-drying process, in which wormlike Fe2O3nanoparticles (10-50 nm)in situnucleated and grew on the surface of N-doped Ti3C2Txnanosheets with Fe-O-Ti bonding. As a conductive matrix, N-doping endows Ti3C2Txwith more active sites and higher electron transfer efficiency. Meanwhile, Fe-O-Ti bonding enhances the stability of the Fe2O3/N-Ti3C2Txinterface and also acts as a pathway for electron transmission. With a large specific surface area (114.72 m2g-1), the three-dimensional crumpled structure of Fe2O3@N-Ti3C2Txfacilitates the charge diffusion kinetics and enables easier exposure of the active sites. Consequently, Fe2O3@N-Ti3C2Txcomposite exhibits outstanding electrochemical performance as anode for LIBs, a reversible capacity of 870.2 mAh g-1after 500 cycles at 0.5 A g-1, 1129 mAh g-1after 280 cycles at 0.2 A g-1and 777.6 mAh g-1after 330 cycles at 1 A g-1.

Direct Electrochemical Leaching Method for High-Purity Lithium Recovery from Spent Lithium Batteries.

Recovering lithium from lithium batteries (LIBs) is a promising approach for sustainable ternary lithium battery (T-LIB) development. Current lithium recovery methods from spent T-LIBs mainly concentrated on chemical leaching methods. However, chemical leaching relying on the additional acid seriously threatens the global environment and nonselective leaching also leads to low Li recovery purity. Here, we first reported a direct electro-oxidation method for lithium leaching from spent T-LIBs (Li0.8Ni0.6Co0.2Mn0.2O2); 95.02% of Li in the spent T-LIBs was leached under 2.5 V in 3 h. Meanwhile, nearly 100% Li recovery purity was also achieved, attributed to no other metal leaching and additional agents. We also clarified the relationship between lithium leaching and other metals during the electro-oxidation of spent T-LIBs. Under the optimized voltage, Ni and O maintain the electroneutrality in the structure assisting Li leaching, while Co and Mn maintain their valence states. A direct electro-oxidation Li leaching approach achieves high Li recovery purity and meanwhile overcomes the secondary pollution problem.