RESUMEN
A visual detection method for malachite green (MG) in food was established based on 'double-response-OFF' ratiometric fluorescent paper-based sensor. Biomass carbon quantum dots (BCQDs) using broad bean shell, and Ti3C2MXene quantum (MQDs) dots modified by ethylenediamine were synthesized by solvothermal method. The MG and two kinds of quantum dots could undergo static quenching, and the fluorescence color of two kinds of quantum dots gradually changed from red to blue, eventually the fluorescence was quenched, and the pattern had a two-stage linear relationship using fluorescent spectrofluorometer in the range of 0.1-140.0µM and the detection limit of 0.07µM. On this basis, a BCQDs/MQDs ratiometric fluorescence paper-based sensor was constructed and applied to fish sample. Through mobile phone software-Color recognizer, RGB values of fluorescent paper-based sensor at various concentrations of MG were extracted. The results showed that MG concentration was linearly correlated withR' value of RGB in the range of 20.0-140.0µM with 16.5µM detection limit. The method had been applied to the determination of canned fish and fresh basa fish samples, and the recovery rates were 97.33%-108.93% and 96.04%-117.97%, respectively. It proved that the ratiometric fluorescent paper-based sensor could be used for the rapid visual quantitative detecting MG in real samples.
Asunto(s)
Nitritos , Puntos Cuánticos , Colorantes de Rosanilina , Elementos de Transición , Animales , Colorantes Fluorescentes , Carbono , Titanio , Biomasa , Límite de Detección , Espectrometría de Fluorescencia , PecesRESUMEN
This work discusses surface modification of cellulose paper specimens for compatibility with nitrogen and sulfur co-doped carbon dots (NSCDs) for lead ion sensing. The interaction of carbon dots (CDs) and cellulose fibers was investigated using silane or chitosan-modified cellulose papers. It was found that modified papers could reduce undesirable redistribution of CDs, during paper drying. Also, only chitosan-modified filter paper was suitable for the successful immobilization of NSCDs. The effect of paper type, chitosan amount, pH, and NSCDs concentration was also studied, and a Whatman No. 42 filter paper modified with chitosan (1% w/v), pH 8.0, and an NSCD concentration of 2.5 g L-1 being selected for further studies. The sensor exhibited high selectivity for lead(II) compared with other metal ions because lead(II) resulted in the most significant changes in the emitted light intensity. Variations in NSCDs fluorescence were measured using a fluorescence imaging system. The NSCDs-paper sensor showed a linear relationship between mean fluorescence intensity and lead(II) in the concentration range of 5.00-1.25 × 102 µmol L-1 with a correlation coefficient (R2 ) of 0.9988 and a detection limit of 4.50 µmol L-1 . The suggested method showed satisfying results for lead(II) determination in different samples as a fast and low-cost approach with on-site application.
Asunto(s)
Quitosano , Puntos Cuánticos , Espectrometría de Fluorescencia/métodos , Colorantes Fluorescentes , Carbono , Nitrógeno , Azufre , CelulosaRESUMEN
Strontium-90 (90Sr) is a major radioactive component that has attracted great attention, but its detection remains challenging since there are no specific energy rays indicative of its presence. Herein, a biosensor that is capable of rapidly detecting Sr2+ ions is demonstrated. Simple colorimetric method for sensitive detection of Sr2+ with the help of single-stranded DNA was developed by preparing MnO2 nanorods as oxidase mimic catalysis 3,3',5,5'-tetramethylbenzidine (TMB). Under weakly acidic conditions, MnO2 exhibited a strong oxidase-mimicking activity to oxidize colorless TMB into blue oxidation products (oxTMB) with discernible absorbance signals. Nevertheless, the introduction of a guanine-rich DNA aptamer inhibited MnO2-mediated TMB oxidation and reduced oxTMB formation, resulting in blue fading and diminished absorbance. Upon the addition of strontium ions to the system, the aptamers formed a stable G-quadruplex structure with strontium ions, thereby restoring the oxidase-mimicking activity of MnO2. Under the best experimental conditions, the absorbance exhibits a linear relationship with the Sr2+ concentration within the range 0.01-200 µM, with a limit of detection of 0.0028 µM. When the concentration of Sr2+ from 10-8 to 10-6 mol L-1, a distinct color change gradient could be observed in paper-based sensor. We successfully applied this approach to determine Sr2+ in natural water samples, obtaining recoveries ranging from 97.6 to 103% with a relative standard deviation of less than 5%. By providing technical solutions for detection, our work contributed to the effective monitoring of transportation of radioactive Sr in the environment.
Asunto(s)
Técnicas Biosensibles , G-Cuádruplex , Nanotubos , Oxidorreductasas/química , Óxidos/química , Colorimetría/métodos , Compuestos de Manganeso/química , Estroncio , ADN , Técnicas Biosensibles/métodosRESUMEN
A one-shot CO2 laser-based strategy to generate conductive reduced graphene oxide (rGO) decorated with nanoceria (nCe) is proposed. The 2D/0D rGO-nCe films, integrated as catalytic sensing layers in paper-based sensors, were employed for on-site monitoring of indoor fogging treatments against Listeria monocytogenes (Lm), a ubiquitous pathogenic bacterium. The rGO-nCe laser-assisted synthesis was optimized to preserve the rGO film morphological and electron-transfer features and simultaneously integrate catalytic nCe. The films were characterized by microscopical (SEM), spectroscopical (EDX, Raman, and FTIR), and electrochemical techniques. The most performing film was integrated into a nitrocellulose substrate, and the complete sensor was assembled via a combination of xurography and stencil printing. The rGO-nCe sensor's catalytic activity was proved toward the detection of H2O2, obtaining sensitive determination (LOD = 0.3 µM) and an extended linear range (0.5-1500 µM). Eventually, the rGO-nCe sensor was challenged for the real-time continuous monitoring of hydrogen peroxide aerosol during no-touch fogging treatment conducted following the EU's recommendation for biocidal product use. Treatment effectiveness was proved toward three Lm strains characterized by different origins, i.e., type strain ATCC 7644, clinical strain 338, and food strain 641/6II. The sensor allows for discrimination and quantification treatments at different environmental biocidal amounts and fogging times, and correlates with the microbiological inhibition, promoting the proposed sensor as a useful tool to modulate and monitor no-touch treatments.
Asunto(s)
Desinfección , Grafito , Peróxido de Hidrógeno , Rayos Láser , Listeria monocytogenes , Papel , Grafito/química , Peróxido de Hidrógeno/química , Listeria monocytogenes/efectos de los fármacos , Listeria monocytogenes/aislamiento & purificación , Desinfección/métodos , Cerio/química , Límite de Detección , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , CatálisisRESUMEN
The monitoring of foodborne bacterial contamination requires simple and convenient biosensors. This work describes a novel paper-based colorimetric biosensor for the rapid and sensitive bacteria detection. The biosensor was constructed via the encapsulation of D-alanyl-D-alanine capped gold nanoparticles (DADA-AuNPs) in a modified paper that was fabricated by the freeze-drying of TEMPO-oxidized cellulose nanofibers/cationic guar gum composite hydrogel-modified filter paper. The results indicated that the size of DADA-AuNPs largely determined the color of their aqueous system and they exhibited light red to dark red as their size increased from around 6 to 36 nm. All these different sized DADA-AuNPs turned into colorless when encountered with either S. aureus or E. coli. In particular, the smaller the DADA-AuNPs size, the faster the discoloration. The encapsulation of DADA-AuNPs into modified paper negligibly changed their responsiveness towards bacteria. In comparison to the original filter paper and oven-dried hydrogel-modified filter paper, the freeze-dried hydrogel-modified paper was demonstrated to be a better substrate for the encapsulation of DADA-AuNPs since they could be loaded with a larger amount of DADA-AuNPs in a faster way and showed a better perceivable color. This work demonstrated a promising paper-based colorimetric biosensor for the facile and rapid detection of bacteria.
Asunto(s)
Técnicas Biosensibles , Colorimetría , Óxidos N-Cíclicos , Galactanos , Mananos , Nanopartículas del Metal , Nanofibras , Papel , Gomas de Plantas , Mananos/química , Gomas de Plantas/química , Nanofibras/química , Colorimetría/métodos , Galactanos/química , Técnicas Biosensibles/métodos , Óxidos N-Cíclicos/química , Nanopartículas del Metal/química , Oro/química , Staphylococcus aureus/aislamiento & purificación , Hidrogeles/química , Escherichia coli/aislamiento & purificación , Celulosa/química , Celulosa Oxidada/química , BacteriasRESUMEN
Traditional identification methods based on cholinesterase inhibition are limited to recognizing organic phosphorus and carbamate esters, and their response to sulfonylurea pesticides is weak. Residual sulfonylurea pesticides can pose a threat to human health. So, it is very important to develop an effective, rapid and portable method for sulfonylurea pesticides detection. Herein, we first found that sulfonylurea pesticides have activity-enhancing effects on copper-based nanozymes, and then combined them with the array technology to construct a six-channel sensing array method for selectively identifying sulfonylurea pesticides and detecting total concentration of sulfonylurea pesticides (the limit of detection was 0.03 µg/mL). This method has good selectivity towards sulfonylurea pesticides. In addition, a smartphone-based colorimetric paper sensor analysis method was developed to achieve the on-site detection of the total concentration of sulfonylurea pesticides. And this array can also be used for individual differentiation (1-100 µg/mL). Our work not only investigates the specific responses of copper-based nanozymes to sulfonylurea pesticides, but also develops a simple method that contributes to directly detect sulfonylurea pesticides at the source of pollution, providing insights for further research on sulfonylurea pesticides detection and filling the gap in pesticide residue studies.
Asunto(s)
Residuos de Plaguicidas , Plaguicidas , Humanos , Plaguicidas/análisis , Cobre/análisis , Residuos de Plaguicidas/análisis , Colorimetría/métodosRESUMEN
The detections of H2O2 and catalase play an important role in daily life. This study introduces a paper-based flow sensor that is specifically designed to detect H2O2 and catalase. The sensor utilizes a hydrogel composed of cross-linked 4-carboxyphenylboronic acid and polyvinyl alcohol. When H2O2 is in contact with the hydrogel, the B-C bonds of the hydrogel undergo a reactive process, causing decomposition of the hydrogel. The pH indicator strip enables the visual monitoring of the viscosity change that occurs during the gel-sol transition. The quantification of H2O2 is accomplished by assessing the proportion of water coverage on the pH indicator strip. The sensor shows a detection limit of 0.077 wt% and is applicable for the quantitative measurement of H2O2 in routinely used disinfectants. Furthermore, the presence of catalase is effectively identified and the detection of catalase in milk is successfully fulfilled. In summary, this work proposes a simple, user-friendly, label-free, and cost-effective method for constructing a paper-based flow sensor using borate cross-linked polyvinyl alcohol hydrogel, showing great potential for detecting H2O2 and catalase in various practical scenarios.
Asunto(s)
Boratos , Catalasa , Peróxido de Hidrógeno , Papel , Alcohol Polivinílico , Peróxido de Hidrógeno/análisis , Peróxido de Hidrógeno/química , Alcohol Polivinílico/química , Catalasa/química , Boratos/química , Hidrogeles/química , Animales , Técnicas Biosensibles/métodos , Técnicas Biosensibles/instrumentación , Leche/química , Límite de Detección , Reactivos de Enlaces Cruzados/química , Concentración de Iones de HidrógenoRESUMEN
The large use and emission of p-nitrophenol (p-NP) seriously pollute the environment and endanger human health. In this work, a hydrazone-linked fluorescent covalent organic framework (BATHz-COF) was simply synthesized at room temperature and covalently linked N-acetyl-L-cysteine (NALC) via the "thiol-ene" click reaction, where carboxyl groups were introduced to improve dispersion and fluorescence intensity. As a rapid, good selectivity and reusability fluorescence sensor, the obtained COF-NALC has been used for quantitative analysis of p-NP predicated on the internal filtering effect (IFE). Under optimal conditions, COF-NALC enabled quantitative detection of p-NP with a linear range of 5-50 µM and the detection limit was 1.46 µM. The application of COF-NALC to the detection of p-NP in river water samples was successful, and the satisfactory recoveries were 98.0%-109.3%. Furthermore, the fluorescent COF paper chips constructed by in situ growth were combined with a smartphone to build a visual platform for the quick and real-time detection of p-NP, providing an excellent illustration for the development of intelligent fluorescence sensing in environmental analysis.
Asunto(s)
Hidrazonas , Nitrofenoles , Contaminantes Químicos del Agua , Nitrofenoles/análisis , Nitrofenoles/química , Hidrazonas/química , Contaminantes Químicos del Agua/análisis , Cisteína/análisis , Cisteína/química , Límite de Detección , Colorantes Fluorescentes/química , Estructuras Metalorgánicas/química , Papel , Fluorescencia , Monitoreo del Ambiente/métodos , Espectrometría de Fluorescencia , Ríos/químicaRESUMEN
This paper presents the development and optimization of a cost-effective paper electrochemical sensor for the detection of TNT using Fe3O4-Au core-shell nanoparticles modified with cysteamine (Fe3O4@Au/CA). The sensor was constructed by modifying a graphite paste with the aforementioned nanoparticles, which facilitated the formation of a Meisenheimer complex between cysteamine and TNT as an electron donor and an electron acceptor, respectively. The central composite design was employed to optimize four key parameters pH, modifier percentage, contact time, and buffer type to enhance the performance of the sensor. The detection limit was found to be 0.5 nM of TNT, while the linear range of the electrode response spanned from 0.002 µM to 10 µM. The simplicity and low cost of the sensor make it highly attractive for practical applications, particularly in scenarios where rapid and on-site TNT detection is required.
RESUMEN
A paper-based sensor array consisting of eight nanoclusters (NCs) combined with multivariate analysis was used as a rapid method for the determination of animal sources of milk; goat, camel, sheep and cow. It was also used to detect and quantify three adulterants including sodium hypochlorite, hydrogen peroxide and formaldehyde in milk. The changes in fluorescence intensity of the NCs were quantified using a smartphone when the sensor array was immersed in the milk samples. The device generated a specific colorimetric signature for milk samples from different animals and for different adulterants. This allowed simultaneous identification of animal and adulterant sources with 100% accuracy. The device was found to be capable of accurately measuring the level of contaminants with a detection limit as low as 0.01% using partial least squares regression. In conclusion, a paper-based optical tongue device has been developed for the detection of adulterants in milk with point-of-need capability.
Asunto(s)
Contaminación de Alimentos , Leche , Leche/química , Animales , Contaminación de Alimentos/análisis , Bovinos , Ovinos , Cabras , Camelus , Peróxido de Hidrógeno/química , Peróxido de Hidrógeno/análisis , Hipoclorito de Sodio/química , Hipoclorito de Sodio/análisis , Fluorescencia , Formaldehído/análisis , Nanoestructuras/químicaRESUMEN
The sensing mechanisms of common humidity sensors related to conductive active materials, which can be simply attributed to the variations in resistivity due to the separation of conductive materials and variations in polymer permittivity, are generally plagued by drawbacks such as cumbersome fabrication processes, high cost and low performance. Herein, we prepared Zn/Cellulose filter paper (CFP)/Nanoscale carbon ink (NCI)/Cu structure humidity power generators (ZHGs) based on the power generation principle of typical zinc-air batteries, using active metals with strong conductivity as electrodes, and the redox reactions that took place in the zinc-air battery can convert the chemical energy in the electrode into a stable electrical energy. The ZHG fabricated in this work can reach an extremely high open circuit voltage (Voc) of 0.803 V at 97 % RH and possesses an excellent power density of 312.24 µW/cm2, which has a good linear relationship (R2 = 0.9669) over a wide humidity range (20-97 % RH). In addition, 10 ZHGs in series can charge commercial capacitors up to 3.83 V. Finally, the proof of concept demonstrated that the humidity power generation sensor can be well applied in human respiratory monitoring, finger non-contact switch, and power supply for light emitting diode (LED).
RESUMEN
Foodborne pathogen infection poses a significant threat to public health and is considered as one of the most serious hazards in global food safety. Herein, a sensitive and efficient method for on-site monitoring of foodborne pathogens was developed by using a smartphone-assisted paper-sensor combined with phage-derived bacterial-binding proteins-nano magnetic beads (PBPs-MBs). PBPs including tail fiber protein (TFP:gp13), cell-wall binding domain (CBD) of endolysin and tailspike protein (TSP) coated on the surface of MBs were applied for rapid separation and enrichment of targeted bacteria (Escherichia coli O157:H7, Staphylococcus aureus and Salmonella typhimurium, respectively) from food samples in 20 min before detection on paper-based sensors. The paper-based sensor was loaded with the lytic agent (polymyxin B) to induce bacterial lysis and release specific endogenous enzymes. Subsequently, three distinct chromogenic substrates were hydrolyzed by their corresponding enzymes, resulting in characteristic color changes on the paper, respectively. In addition, a smartphone APP for red-green-blue (RGB) color analysis of paper was able to directly detect three foodborne pathogens. As a result, the limit of detection (LOD) values for three foodborne pathogens were found to be 2.44 × 102, 2.68 × 104 and 4.62 × 103 CFU/mL, respectively, which were much lower than other studies (106-108 CFU/mL) based on enzymes. Moreover, the feasibility of this approach was further assessed through the successful detection of targeted bacteria in real samples with satisfactory recovery rates. In conclusion, this smartphone-assisted biosensor offers promising application potential for point-of-care testing (POCT) of foodborne pathogens in resource-scarce areas.
Asunto(s)
Bacteriófagos , Técnicas Biosensibles , Proteínas Portadoras , Proteínas Bacterianas , Teléfono Inteligente , Salmonella typhimurium , Microbiología de AlimentosRESUMEN
Inductive contact force sensors, known for their high precision and anti-interference capabilities, hold significant potential applications in fields such as wearable and medical monitoring devices. Most of the current research on inductive contact force sensors employed novel nanomaterials as sensitive elements to enhance their sensitivity and other performance characteristics. However, sensors developed through such methods typically involve complex preparation processes, high costs, and difficulty in biodegradation, which limit their further development. This article introduces a new flexible inductive contact force sensor using paper as a sensitive element. Paper inherently possesses micro- and nanostructures on its surface and interior, enabling it to sensitively convert changes in contact force into changes in displacement, making it suitable for use as the sensor's sensitive element. Additionally, the advantages of paper also include its great flexibility, low cost, wide availability, and biodegradability. Performance testing on this flexible sensor showed good repeatability, hysteresis, sensitivity, and consistency. When used in experiments for monitoring human motion and respiration, this sensor also exhibited great detection performance. The proposed inductive paper-based flexible contact force sensor, with its simple structure, easy manufacturing process, cost-effectiveness, eco-friendliness, and good sensing performance, provides new insights into research for contact force sensors.
RESUMEN
The development of point-of-care testing (POCT) for circulating tumor DNA (ctDNA) is meaningful for the non-invasive cancers screening and diagnosis, particularly in resource-limited settings. The microfluidic paper-based analytical device (µPAD) provides an ideal platform, its application in ctDNA assays remains underexplored. In this work, a multifunctional µPAD was manufactured, which can enhance the efficiency and reduce the cost of ctDNA sensing. Additionally, a smartphone-based application analysis was fabricated for convenient, portable detection and colorimetric signal readout. Moreover, the novel oxidase-like MnB2 nanozyme was introduced in the sandwiches sensing strategy, utilizing its catalytic properties to effectively generate a colorimetric signal. The use of MnB2 nanozyme in sensing application is relatively novel, and its catalytic performance and mechanism was thoroughly evaluated via experiment and density functional theory (DFT) calculations. After optimizing the detection conditions, the proposed biosensor exhibited satisfactory results. Furthermore, the method was successfully used to detect ctDNA in tumor cell lysates and peripheral blood samples from tumor-bearing mice. The results were consistent with standard qPCR method, affirming the reliability of our POCT analysis device in ctDNA detection. Thus, this work not only provides a paper-based POCT device and intelligent analysis tool for portable cancers diagnosis, but it also paves a new application path for MnB2 nanozyme in the sensing filed.
Asunto(s)
ADN Tumoral Circulante , Papel , Teléfono Inteligente , ADN Tumoral Circulante/sangre , ADN Tumoral Circulante/genética , Animales , Humanos , Técnicas Biosensibles/métodos , Ratones , Colorimetría/métodos , Oxidorreductasas/química , Oxidorreductasas/genéticaRESUMEN
Flexible paper-based force sensors have garnered significant attention for their important potential applications in healthcare wearables, portable electronics, etc. However, most studies have only used paper as the flexible substrate for sensors, not fully exploiting the potential of paper's micro-nanostructure for sensing. This article proposes a novel approach where paper serves both as the sensitive element and the flexible substrate of force sensors. Under external mechanical forces, the micro-nanostructure of the conductive-treated paper will change, leading to significant changes in the related electrical output and thus enabling sensing. To demonstrate the feasibility and universality of this new method, the article takes paper-based capacitive pressure sensors and paper-based resistive strain sensors as examples, detailing their fabrication processes, constructing sensing principle models based on the micro-nanostructure of paper materials, and testing their main sensing performance. For the capacitive paper-based pressure sensor, it achieves a high sensitivity of 1.623 kPa-1, a fast response time of 240 ms, and a minimum pressure resolution of 4.1 Pa. As for the resistive paper-based strain sensor, it achieves a high sensitivity of 72 and a fast response time of 300 ms. The proposed new method offers advantages such as high sensitivity, simplicity in the fabrication process, environmental friendliness, and cost-effectiveness, providing new insights into the research of flexible force sensors.
RESUMEN
Captopril (CP) is commonly used as an active enzyme inhibitor for the treatment of coronary heart disease, hypertension and angina pectoris. The development of sensitive and efficient method for CP analysis is of great importance in biomedical research. Herein, we fabricated a sensitive and robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH2@ZIF-8 and Co, N-doped carbon nanozymes with oxidase-mimicking activity for accurate monitoring of captopril. The hydrogel-assisted paper-based sensor appeared a visible pink signal due to the catalytic oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) to oxDPD by Co, N-doped carbon-based nanozymes, and resulted in the fluorescence quenching of UiO-66-NH2@ZIF-8. In the presence of captopril, the oxidation of chromogenic substrate DPD by Co, N-doped nanozymes in the hydrogel-assisted paper-based sensor was hindered and accompanied by a change in the visible color, leading to recovery of the fluorescence of UiO-66-NH2@ZIF-8, and the change in the fluorescence color could also be observed. Therefore, the quantitative detection of captopril is achieved by taking a smartphone photograph and converting the image parameters into data information using ImageJ software. The portable hydrogel-assisted paper sensor provided sensitive detection of captopril in two modes based on visible color change as well as fluorescence color change with limits of detection of 0.45 µM and 0.47 µM, respectively. This hydrogel-assisted paper-based sensor has been successfully applied to the accurate monitoring of captopril in human serum, providing a potential avenue for in situ detection of captopril.
Asunto(s)
Captopril , Hidrogeles , Papel , Captopril/análisis , Captopril/sangre , Captopril/química , Humanos , Hidrogeles/química , Estructuras Metalorgánicas/química , Fluorescencia , Límite de Detección , Espectrometría de Fluorescencia , Oxidación-ReducciónRESUMEN
Today, diabetes mellitus is one of the most common diseases that affects the population on a worldwide scale. Patients suffering from this disease are required to control their blood-glucose levels several times a day through invasive methods such as piercing their fingers. Our NaGdF4: 5% Er3+, 3% Nd3+ nanoparticles demonstrate a remarkable ability to detect D-glucose levels by analysing alterations in their red-to-green ratio, since this sensitivity arises from the interaction between the nanoparticles and the OH groups present in the D-glucose molecules, resulting in discernible changes in the emission of the green and red bands. These luminescent sensors were implemented and tested on paper substrates, offering a portable, low-cost and enzyme-free solution for D-glucose detection in aqueous solutions with a limit of detection of 22â¯mg/dL. With this, our study contributes to the development of non-invasive D-glucose sensors, holding promising implications for managing diabetes and improving overall patient well-being with possible future applications in D-glucose sensing through tear fluid.
Asunto(s)
Glucosa , Metales de Tierras Raras , Nanopartículas , Papel , Metales de Tierras Raras/química , Glucosa/análisis , Glucosa/química , Nanopartículas/química , Técnicas Biosensibles/métodos , Humanos , Glucemia/análisis , Límite de DetecciónRESUMEN
ß-Galactosidase (ß-Gala) is an essential biomarker enzyme for early detection of breast tumors and cellular senescence. Creating an accurate way to monitor ß-Gala activity is critical for biological research and early cancer detection. This work used fluorometric, colorimetric, and paper-based color sensing approaches to determine ß-Gala activity effectively. Via the sensing performance, the catalytic activity of ß-Gala resulted in silicon nanoparticles (SiNPs), fluorescent indicators obtained via a one-pot hydrothermal process. As a standard enzymatic hydrolysis product of the substrate, kaempferol 3-O-ß-d-galactopyranoside (KOßDG) caused the fluorometric signal to be attenuated on kaempferol-silicon nanoparticles (K-SiNPs). The sensing methods demonstrated a satisfactory linear response in sensing ß-Gala and a low detection limit. The findings showed the low limit of detection (LOD) as 0.00057 and 0.098 U/mL for fluorometric and colorimetric, respectively. The designed probe was then used to evaluate the catalytic activity of ß-Gala in yogurt and human serum, with recoveries ranging from 98.33 to 107.9%. The designed sensing approach was also applied to biological sample analysis. In contrast, breast cancer cells (MCF-7) were used as a model to test the in vitro toxicity and molecular fluorescence imaging potential of K-SiNPs. Hence, our fluorescent K-SiNPs can be used in the clinic to diagnose breast cellular carcinoma, since they can accurately measure the presence of invasive ductal carcinoma in serologic tests.
Asunto(s)
Neoplasias de la Mama , Quempferoles , Nanopartículas , Silicio , beta-Galactosidasa , Femenino , Humanos , beta-Galactosidasa/metabolismo , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/síntesis química , Neoplasias de la Mama/diagnóstico , Neoplasias de la Mama/patología , Colorimetría , Quempferoles/química , Quempferoles/farmacología , Células MCF-7 , Estructura Molecular , Nanopartículas/química , Tamaño de la Partícula , Silicio/químicaRESUMEN
Herein, a cost-effective and portable microfluidic paper-based sensor is proposed for the simultaneous and rapid detection of glucose, free amino acids, and vitamin C in fruit. The device was constructed by embedding a poly(carboxybetaine acrylamide) (pCBAA)-modified cellulose paper chip within a hydrophobic acrylic plate. We successfully showcased the capabilities of a filter paper-based microfluidic sensor for the detection of fruit nutrients using three distinct colorimetric analyses. Within a single paper chip, we simultaneously detected glucose, free amino acids, and vitamin C in the vivid hues of cyan blue, purple, and Turnbull's blue, respectively, in three distinctive detection zones. Notably, we employed more stable silver nanoparticles for glucose detection, replacing the traditional peroxidase approach. The detection limits for glucose reached a low level of 0.049 mmol/L. Meanwhile, the detection limits for free amino acids and vitamin C were found to be 0.236 mmol/L and 0.125 mmol/L, respectively. The feasibility of the proposed sensor was validated in 13 different practical fruit samples using spectrophotometry. Cellulose paper utilizes capillary action to process trace fluids in tiny channels, and combined with pCBAA, which has superior hydrophilicity and anti-pollution properties, it greatly improves the sensitivity and practicality of paper-based sensors. Therefore, the paper-based colorimetric device is expected to provide technical support for the nutritional value assessment of fruits in the field of rapid detection.