Enhanced Thermoelectric Properties of Ti2CO2-Bismuthene-Ti2CO2: Optimized Power Factor and Reduced Thermal Conductivity.

In this study, bismuthene was intercalated between bilayer Ti2CTx to induce significant modifications in its electronic and phonon structures, thereby enhancing its thermoelectric properties. First-principles calculations reveal that the insertion of bismuthene transforms the Ti2CO2 system from a semiconductor into a metal and optimizes the thermoelectric properties of bilayer Ti2CO2 by enhancing its power factor and reducing its lattice thermal conductivity. Under the first-principles calculation parameters used in this study, the ZT of the Ti2CO2 system increased from 0.12 to 0.55. Conversely, for metallic bilayer MXenes, the introduction of bismuthene led to a substantial decrease in ZT (from 0.53 to 0.11 in the Ti2C system and from 0.07 to 0.05 in the Ti2CCl2 system). This study investigates the physical mechanisms underlying the enhancement of thermoelectric properties from both electronic and phononic perspectives and provides theoretical insights into the development and application of MXene-based thermoelectric materials.

Significantly Enhanced the Energy Density of Dielectric Composites by Sandwich Structure with Highly Insulating Mica Nanosheets.

Dielectric polymer composites exhibit great application prospects in advanced pulse power systems and electric systems. However, the decline of breakdown strength by loading of single high dielectric constant nanofiller hinders the sustained increase in energy density of the composites. Here, a sandwich-structured nanocomposite prepared with mica nanosheets as the second filler exhibits decoupled modulation of dielectric constant and breakdown strength. The traditional layered clay mineral mica is exfoliated into nanosheets and filled into polyvinylidene difluoride (PVDF), which shows a special depolarization effect in the polymer matrix. In Kelvin probe microscopy characterization and thermally stimulated depolarization current indicates that the mica nanosheets provided space charge traps for the polymer matrix and effectively suppressed the carrier motion. A sandwich structure composite material with mica nanosheets as the central layer has achieved a high energy density of 11.48 J cm-3, 2.4 times higher than the pure PVDF film. This is due to the fact that randomly oriented distribution of nanosheets in a polymer matrix provide better current blocking. This work provides an effective method to improve the energy density of dielectric polymer composites by synergistically introducing insulating nanosheets and high dielectric constant nanofillers.

Sandwich-Structured Mxene/Waste Polyurethane Foam Composites For Highly Efficient Electromagnetic Interference, Infrared Shielding and Joule Heating.

Electromagnetic interference (EMI) shielding and infrared (IR) stealth materials have attracted increasing attention owing to the rapid development of modern communication and military surveillance technologies. However, to realize excellent EMI shielding and IR stealth performance simultaneously remains a great challenge. Herein, a facile strategy is demonstrated to prepare high-efficiency EMI shielding and IR stealth materials of sandwich-structured MXene-based thin foam composites (M-W-M) via filtration and hot-pressing. In this composite, the conductive Ti3C2Tx MXene/cellulose nanofiber (MXene/CNF) film serves as the outer layer, which reflects electromagnetic waves and reduces the IR emissivity. Meanwhile, the middle layer is composed of a porous waste polyurethane foam (WPUF), which not only improves thermal insulation capacity but also extends electromagnetic wave propagation paths. Owing to the unique sandwich structure of "film-foam-film", the M-W-M composite exhibits a high EMI shielding effectiveness of 83.37 dB, and in the meantime extremely low emissivity (22.17%) in the wavelength range of 7-14 µm and thermal conductivity (0.19 W m-1 K-1), giving rise to impressive IR stealth performance at various surrounding temperatures. Remarkably, the M-W-M composite also shows excellent Joule heating properties, capable of maintaining the IR stealth function during Joule heating.

All-Organic Piezo-Photocatalytic Film with Highly Efficient Catalysis, Weak-Force Excitation, and Recyclability.

Polyaniline (PANI), a typical organic photocatalyst, has an adjustable structure and good stability, can be easily synthesized on a large scale, and is economical. PANI is doped with ions to regulate its internal structure and improve its photocatalytic performance. However, its photocatalytic performance is limited by the doping concentration and its intrinsic properties, hindering its further application. Herein, PANI films with a piezo-photocatalytic function are fabricated to improve photocatalytic performance and explore their self-powered environmental purification property. PANI/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) sandwich films, with PVDF-HFP as the interlayer, are prepared by introducing a piezoelectric field into PANI photocatalysts, thereby achieving excellent piezo-photocatalytic performance. The as-fabricated piezo-photocatalyst degrades methyl orange at a rate of 91.2% after 60 min under magnetic stirring. Owing to the low Young's modulus of the all-organic catalyst, self-powered purification is realized using the PANI/PVDF-HFP film. Leaf surfaces are functionalized by loading the film in them for removing pollutants under sunlight and water flow. Thus, this study proposes a common strategy, wherein a piezoelectric interlayer is introduced to load the organic photocatalyst for preparing an all-organic piezo-photocatalyst. This piezo-photocatalyst can be easily recycled and responds to weak forces, realizing its application for self-powered environmental purification.

Multifunctional Sandwich-Structured Super-Hygroscopic Zinc-Based MOF-Overlayed Cooling Wearables for Special Personal Thermal Management.

Personal protective equipment pays attention exclusively to external safety protection and ignores the internal thermoregulation of physiological state in association with sweating. Herein, a super-hygroscopic calcium-doped poly(sodium 4-styrenesulfonate) and superhydrophobic metal-organic-framework-overlayed wearables (Ca-PSS/MOF) integrated cooling wearable is proposed for special personal thermal management (PTM). Compared to the pristine fabric, the superhydrophobic MOF wearables exhibit anti-fouling and antibacterial capabilities, and the antibacterial efficiency is up to 99.99% and 98.99% against E. coli and S. aureus, respectively. More importantly, Ca-PSS/MOF demonstrate significant heat index changes up to 25.5 °C by reducing relative humidity dramatically from 91.0% to 60.0% and temperature from 36.5 to 31.6 °C during the running test. The practical feasibility of the Ca-PSS/MOF cooling wearables is well proved with the protective suit of the fireman. Owing to these multifunctional merits, the sandwich-structured cooling Ca-PSS/MOF are expected to provide new insights for designing the next-generation multifunctional apparel for PTM.

A Sandwich Structure Ag/MgFe2O4-Deposited Surface Carbonized Wood for Integrated Solar Steam Generation and Photoreduction of Cr(VI).

The severe deterioration of the marine ecosystem significantly negatively impacts the performance of solar-driven steam generation (SSG) and the quality of the obtained freshwater. Herein, a bifunctional Ag/MgFe2O4@SCW reactor with a sandwich structure is designed for efficient SSG and Cr(VI) reduction, which is constructed via in situ deposit Ag nanoparticles (NPs) and MgFe2O4 onto surface carbonized wood (SCW). Owing to the advanced sandwich structure and strong interfacial interactions between each component, an ultra-high evaporation rate of 1.55 kg m-2 h-1 and the efficiency of 88.6% are achieved using Ag/MgFe2O4@SCW under 1 sun. The system exhibits the long-term evaporation performance in the simulated sewage and strong acid/base solutions along with water-harvesting capacity in outdoor solar desalination. The quality of distilled water after desalination of actual seawater and NaCl solutions with different concentrations meets the WHO-recommended drinkable water standards. Furthermore, Ag/MgFe2O4@SCW shows outstanding antibacterial property, self-desalting capacity, as well as reusability and structure stability. Most importantly, the fast carrier separation endows Ag/MgFe2O4@SCW with superior photocatalytic activity and Cr(VI) photoreduction of up to 96.1% after 180 min of illumination. The bifunctional Ag/MgFe2O4@SCW reactor provides an advanced synergistic mechanism for improving SSG and photocatalytic performance, while being promising for solar-powered production of clean water.

Design and experimental validation of a finite-size labyrinthine metamaterial for vibro-acoustics: enabling upscaling towards large-scale structures.

In this article, we present the design and experimental validation of a labyrinthine metamaterial for vibro-acoustic applications. Based on a two-dimensional unit cell, different designs of finite-size metamaterial specimens in a sandwich configuration including two plates are proposed. The design phase includes an optimization based on Bloch-Floquet analysis with the aims of maximizing the band gap and extruding the specimens in the third dimension while keeping the absorption properties almost unaffected. By manufacturing and experimentally testing finite-sized specimens, we assess their capacity to mitigate vibrations in vibro-impact tests. The experiments confirm a band gap in the low- to mid-frequency range. Numerical models are employed to validate the experiments and to examine additional vibro-acoustic load cases. The metamaterial's performances are compared with benchmark solutions, usually employed for noise and vibration mitigation, showing a comparable efficacy in the band gap region. To eventually improve the metamaterial's performance, we optimize its interaction with the air and test different types of connections between the metamaterial and the homogeneous plates. This finally leads to metamaterial samples largely exceeding the benchmark performances in the band gap region and reveals the potential of interfaces for performance optimization of composed structures.This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.

Aromatic residues in N-terminal domain of archaeal trehalase affect the folding and activity of catalytic domain.

Considering the structure of the bacterial GH15 family glucoamylase (GA), Thermoplasma trehalase Tvn1315 may be composed of a ß-sandwich domain (BD) and a catalytic domain (CD). Tvn1315 BD weakly binds to insoluble ß-glucans, such as cellulose, and helps fold CD. To determine how aromatic residues contribute to proper folding and enzyme activity, we performed alanine scanning for 32 aromatic residues in the BD. The study did not identify a single residue involved in glucan binding. However, several aromatic residues were found to be involved in BD or CD folding and in modulating the activity of the full-length enzyme. Among those aromatic residue mutations, the W43A mutation led to reduced solubility of the BD and full-length protein and resulted in a full-length enzyme with significantly lower activity. The activity of W43F and W43Y was significantly higher than that of W43A. In addition, Ala substitutions of Tyr83, Tyr113, and Tyr17 led to a reduction in trehalase activity, but Phe substitutions of these residues could be tolerated, as these mutants maintained activities similar to WT activity. Thus, these aromatic residues in BD may interact with CD and modulate enzyme activity. KEY POINTS: • Aromatic residues in the BD are involved in BD and CD folding. • Aromatic residues in the BD near the CD active site modulate enzyme activity. • BD interacts with CD and closely modulates enzyme activity.

Graphene Nanoplatelets/Polydimethylsiloxane Flexible Strain Sensor with Improved Sandwich Structure.

In engineering measurements, metal foil strain gauges suffer from a limited range and low sensitivity, necessitating the development of flexible sensors to fill the gap. This paper presents a flexible, high-performance piezoresistive sensor using a composite consisting of graphene nanoplatelets (GNPs) and polydimethylsiloxane (PDMS). The proposed sensor demonstrated a significantly wider range (97%) and higher gauge factor (GF) (6.3), effectively addressing the shortcomings of traditional strain gauges. The microstructure of the GNPs/PDMS composite was observed using a scanning electron microscope, and the distribution of the conductive network was analyzed. The mechanical behavior of the sensor encapsulation was analyzed, leading to the determination of the mechanisms influencing encapsulation. Experiments based on a standard equal-strength beam were conducted to investigate the influence of the base and coating dimensions of the sensor. The results indicated that reducing the base thickness and increasing the coating length both contributed to the enhancement of the sensor's performance. These findings provide valuable guidance for future development and design of flexible sensors.

Atomically Precise Ternary Cluster: Polyoxometalate Cluster Sandwiched by Gold Clusters Protected by N-Heterocyclic Carbenes.

Coinage metal (Au, Ag, Cu) cluster and polyoxometalate (POM) cluster represent two types of subnanometer "artificial atoms" with significant potential in catalysis, sensing, and nanomedicine. While composite clusters combining Ag/Cu clusters with POM have achieved considerable success, the assembly of gold clusters with POM is still lagging. Herein, we first designedly synthesized two cluster structural units: an Au3O cluster stabilized by diverse N-heterocyclic carbene (NHC) ligands and an amine-terminated POM linker. The subsequent reaction involved amine substitution in the POM linker for the central O atom in the Au3O cluster, resulting in the first ternary composite cluster-a POM cluster sandwiched by two Au clusters protected by NHCs. Single-crystal X-ray diffraction and other characteristic methods characterized their atomically precise structures. Furthermore, altering the NHC ligands decreased the number of gold atoms in the sandwich structures, accompanying the different protonated degrees of amine ligand in the terminal end of the POM linker. These composite clusters showed excellent performances in catalytic H2O2 conversion through the synergistic effect between gold clusters and POM clusters. This work opens a new avenue to functional composite metal clusters and would promote their enhanced catalysis applications through intercluster synergistic interactions within composite systems.

Highly Thermally Conductive Aramid Nanofiber Composite Films with Synchronous Visible/Infrared Camouflages and Information Encryption.

The development of highly thermally conductive composites that combine visible light/infrared camouflage and information encryption has been endowed with great significance in facilitating the application of 5G communication technology in military fields. This work uses aramid nanofibers (ANF) as the matrix, hetero-structured silver nanowires@boron nitride nanosheets (AgNWs@BNNS) prepared by in situ growth as fillers, which are combined to fabricate sandwich structured thermally conductive and electrically insulating (BNNS/ANF)-(AgNWs@BNNS)-(BNNS/ANF) (denoted as BAB) composite films by "filtration self-assembly, air spraying, and hot-pressing" method. When the mass ratio of AgNWs@BNNS to BNNS is 1 : 1 and the total mass fraction is 50 wt %, BAB composite film has the maximum in-plane thermal conductivity coefficient (λ∥ of 10.36 W/(m ⋅ K)), excellent electrical insulation (breakdown strength and volume resistivity of 41.5 kV/mm and 1.21×1015â€…Ω â‹… cm, respectively) and mechanical properties (tensile strength of 170.9 MPa). 50 wt % BAB composite film could efficiently reduce the equilibrium temperature of the central processing unit (CPU) working at full power, resulting in 7.0 °C lower than that of the CPU solely integrated with ANF directly. In addition, BAB composite film boasts adaptive visible light/infrared dual camouflage properties on cement roads and jungle environments, as well as the function of fast encryption of QR code information within 24 seconds.

Sandwich-type microRNA biosensor based on graphene oxide incorporated 3D-flower-like MoS2 and AuNPs coupling with HRP enzyme signal amplification.

A sandwich electrochemical biosensing strategy for ultrasensitive detection of miRNA-21 was developed by using graphene oxide incorporated 3D-flower-like MoS2 (3D MoS2-rGO) nanocomposites as the substrate and horseradish peroxidase (HRP)-functionalized DNA strand 1 (S1)-gold nanoparticles (S1-AuNPs-HRP) as signal amplification probes. Herein, 3D MoS2-rGO nanocomposites not only had a large specific surface area and excellent conductivity, but also provided more attachment sites for electrodepositing AuNPs. In the presence of target miRNA, a sandwich structure was formed, and the determination of the miRNA-21 was carried out by measuring the DPV response of H2O2 mediated by hydroquinone (HQ) at a potential of + 0.052 V (vs AgCl reference electrode). Under the optimal experimental conditions, the as-prepared biosensor enabled the ultrasensitive detection of miRNA-21 from 5 fM to 0.5 µM with the low detection limit of 0.54 fM (S/N = 3), comparable or lower than previous reported methods for miRNA-21 detection, which benefited from the synergistic amplification of 3D MoS2-rGO and AuNPs-HRP. The prepared biosensor showed satisfactory selectivity, reproducibility, and stability towards miRNA-21 detection. The biosensor was feasible for accurate and quantitative detection of miRNA-21 in normal human serum samples with RSD below 5.86%, which showed a great potential in clinical analysis and disease diagnosis.

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network.

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37-53) while taking into account a large strain range (15-57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm2. Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.

A Hybrid Domain Image Encryption Algorithm Based on Improved Henon Map.

A hybrid domain image encryption algorithm is developed by integrating with improved Henon map, integer wavelet transform (IWT), bit-plane decomposition, and deoxyribonucleic acid (DNA) sequence operations. First, we improve the classical two-dimensional Henon map. The improved Henon map is called 2D-ICHM, and its chaotic performance is analyzed. Compared with some existing chaotic maps, 2D-ICHM has larger parameter space, continuous chaotic range, and more complex dynamic behavior. Second, an image encryption structure based on diffusion-scrambling-diffusion and spatial domain-frequency domain-spatial domain is proposed, which we call the double sandwich structure. In the encryption process, the diffusion and scrambling operations are performed in the spatial and frequency domains, respectively. In addition, initial values and system parameters of the 2D-ICHM are obtained by the secure hash algorithm-512 (SHA-512) hash value of the plain image and the given parameters. Consequently, the proposed algorithm is highly sensitive to plain images. Finally, simulation experiments and security analysis show that the proposed algorithm has a high level of security and strong robustness to various cryptanalytic attacks.

Flexible Sandwich-Structured Electromagnetic Interference Shielding Nanocomposite Films with Excellent Thermal Conductivities.

With the rapid development and popularization of smart, portable, and wearable flexible electronic devices, urgent demands have been raised for flexible electromagnetic interference (EMI) shielding films to solve related electromagnetic pollution problems. With polyvinyl alcohol (PVA) as polymer matrix, the sandwich-structured EMI shielding nanocomposite films are prepared via electrospinning-laying-hot pressing technology, where Fe3 O4 /PVA composite electrospun nanofibers in the top and bottom layers and Ti3 C2 Tx /PVA composite electrospun nanofibers in the middle layer. Owing to the electrospinning process and the successful construction of the sandwich structure, when the amounts of Ti3 C2 Tx and Fe3 O4 are respectively only 13.3 and 26.7 wt%, the EMI shielding effectiveness (EMI SE) of the sandwich-structured EMI shielding nanocomposite films reach 40 dB with the thickness of 75 µm, higher than that of (Fe3 O4 /Ti3 C2 Tx )/PVA EMI shielding nanocomposite films (21 dB) prepared based on blending-electrospinning-hot pressing process under the same amounts of fillers. Furthermore, the prepared sandwich-structured EMI shielding nanocomposite films possess excellent thermal conductivities and mechanical properties. This novel kind of flexible sandwich-structured EMI shielding nanocomposite films with excellent EMI shielding performances, thermal conductivities, and mechanical properties presents broad application prospects in the fields of EMI shielding and protection for high-power, portable, and wearable flexible electronic devices.

3D printed graphene/polyurethane wearable pressure sensor for motion fitness monitoring.

The structural design of three-dimensional (3D) flexible wearable sensors using conductive polymer composites is a hot spot in current research. In this paper, honeycomb-shaped flexible resistive pressure sensors with three different support structures were manufactured by using thermoplastic polyurethane and graphene nanoplatelets composites based on fused deposition 3D printing technology. Based on the various 3D conductive network of the sensors, the flexible sensor exhibit excellent piezoresistive performance, such as adjustable gauge factor (GF) (13.70-54.58), exceptional durability and stability. A combination of representative volume element and finite element simulations was used to simulate the stress distribution of sensors with different structures to predict the structure's effect on the sensor GF. In addition, the sensor can be attached to human body to monitor the body's swallowing and walking behaviors. The sensor has prospective process applications for intelligent wearable devices.

Structural geometries and mechanical properties of vertebral implant with honeycomb sandwich structure for vertebral compression fractures: a finite element analysis.

BACKGROUND: Because of osteoporosis, traffic accidents, falling from high places, and other reasons, the vertebral body can be compressed and even collapse. Vertebral implants can be used for clinical treatment. Because of the advantages of honeycomb sandwich structures, such as low cost, less material, light weight, high strength, and good cushioning performance. In this paper, the honeycomb sandwich structure was used as the basic structure of vertebral implants. METHODS: The orthogonal experiment method is applied to analyse the size effect of honeycomb sandwich structures by the finite element method. Based on the minimum requirements of three indexes of peak stress, axial deformation, and anterior-posterior deformation, the optimal structure size was determined. Furthermore, through local optimization of the overall structure of the implant, a better honeycomb sandwich structure vertebral implant was designed. RESULTS: The optimal structure size combination was determined as a panel thickness of 1 mm, wall thickness if 0.49 mm, cell side length of 1 mm, and height of 6 mm. Through local optimization, the peak stress was further reduced, the overall stress distribution was uniform, and the deformation was reduced. The optimized peak stress decreased to 1.041 MPa, the axial deformation was 0.1110%, and the anterior-posterior deformation was 0.0145%. A vertebral implant with good mechanical performance was designed. CONCLUSIONS: This paper is the first to investigate vertebral implants with honeycomb sandwich structures. The design and analysis of the vertebral implant with a honeycomb sandwich structure were processed by the finite element method. This research can provide a feasible way to analyse and design clinical implants based on biomechanical principles.

Structural Design and Physical Mechanism of Axial and Radial Sandwich Resonators with Piezoelectric Ceramics: A Review.

Piezoelectric ceramics are inexpensive functional materials which are widely used in sonar detection, home appliances, meteorological detection, telemetry and environmental protection and other applications. Sensors fabricated from these materials are compact and have fast response characteristics. Their underlying functional methodology is based on the direct piezoelectric effect whereby very small mechanical vibration signals are converted into electrical signals. Piezoelectric resonators are based on the reverse piezoelectric effect and they are widely used for the control of precision instruments and precision machinery, microelectronic components, bioengineering devices and other in applications requiring components to provide precision control of the relevant functional mechanism. In this paper, the structural evolution and design mechanism of sandwich resonators based on piezoelectric materials are reviewed, and the advantages and disadvantages of different structures are compared and analyzed. The goal is to provide a comprehensive reference for the selection, application and promotion of piezoelectric resonators and for future structural innovation and mechanism research relevant to sandwich resonators.

Immunoassay-type biosensor based on magnetic nanoparticle capture and the fluorescence signal formed by horseradish peroxidase catalysis for tumor-related exosome determination.

A sandwich-type fluorescent biosensor for the determination of tumor-related exosome was designed. It is based on magnetic nanoparticle (MNP) capture and horseradish peroxidase (HRP) catalysis. MNPs were used as the substrate to capture exosomes by modifying the CD63 antibody on MNPs surface. After that, the biotinylated epithelial cell adhesion molecule (EpCAM) antibody was used to capture the tumor-related exosomes, which specifically express EpCAM. A novel method for the fluorescence measurement of tumor-associated exosome was achieved, with a detection limit as low as 200 (± 9) particles mL-1. The analytical range of this method is from 576 (± 15) particles mL-1 to 5.76 × 107 (± 5.1 × 105) particles mL-1. For the fluorescence measurement, the excitation wavelength was set to 320 nm. Fluorescent spectra were collected at emission wavelength in the range 370 to 550 nm; the data shown in the calibration plot were studied by using the fluorescence intensity at 406 nm. This sensor was also able to successfully detect the exosomes from the plasma of patients with hepatocellular carcinoma (HCC) and healthy humans. Graphical abstract Schematic representation of the sensing process of immunoassay-type biosensor based on magnetic nanoparticle capture and the fluorescence signal formed by the horseradish peroxidase (HRP) catalysis for tumor-related exosome determination.

Indirect surface-enhanced Raman scattering assay of insulin-like growth factor 2 receptor protein by combining the aptamer modified gold substrate and silver nanoprobes.

An indirect aptamer-based SERS assay for insulin-like growth factor 2 receptor (IGF-IIR) protein was developed. The gold substrate and silver nanoparticles (AgNPs) were employed simultaneously to achieve double enhancement for SERS signals. Firstly, the five commercial SERS substrates including Enspectr, Ocean-Au, Ocean-AG, Ocean-SP and Q-SERS substrates were evaluated using 4-mercaptobenzoic acid (4-MBA). The Q-SERS substrate was selected based on low relative standard deviation (RSD, 8.6%) and high enhancement factor (EF, 8.7*105), using a 785 nm laser. The aptamer for IGF-IIR protein was designed to include two sequences: one grafted on gold substrate to specifically capture the IGF-IIR protein and a second one forming a 3' sticky bridge to capture SERS nanotags. The SERS nanotag was composed by AgNPs (20 nm), 4-MBA and DNA probes that can hybridize with the aptamer. Due to the steric-hindrance effect, when the aptamer doesn't combine with IGF-IIR protein, it only can capture the SERS nanotags. Therefore, there was a negative correlation between the concentration of IGF-IIR protein and the intensity of 4-MBA at 1076 cm-1. The detection limit reached to 141.2 fM and linear range was from 10 pM to 1 µM. The SERS aptasensor also exhibits a high reproducibility with an average RSD of 4.5%. The interference test was conducted with other four proteins to verify the accuracy of measuring. The study provides an approach to quantitative determination of proteins based on specific recognition and nucleic acid hybridization of aptamers, to establish sandwich structure for SERS enhancement. Graphical abstractSchematic representation of surface-enhanced Raman scattering (SERS) assay on insulin-like growth factor 2 receptor (IGF-IIR) protein by combining the aptamer modified gold substrate and 4-mercaptobenzoic acid (4-MBA) and DNA probe modified silver nanoparticles.