Potentiometric Surfactant Sensor with a Pt-Doped Acid-Activated Multi-Walled Carbon Nanotube-Based Ionophore Nanocomposite.

Two new surfactant sensors were developed by synthesizing Pt-doped acid-activated multi-walled carbon nanotubes (Pt@MWCNTs). Two different ionophores using Pt@MWCNTs, a new plasticizer, and (a) cationic surfactant 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-DHBI (Pt@MWCNT-DHBI ionophore) and (b) anionic surfactant dodecylbenzenesulfonate-DBS (Pt@MWCNT-DBS ionophore) composites were successfully synthesized and characterized. Both surfactant sensors showed a response to anionic surfactants (dodecylsulfate (SDS) and DBS) and cationic surfactants (cetylpyridinium chloride (CPC) and hexadecyltrimethylammonium bromide (CTAB)). The Pt@MWCNT-DBS sensor showed lower sensitivity than expected with the sub-Nernstian response of ≈23 mV/decade of activity for CPC and CTAB and ≈33 mV/decade of activity for SDS and DBS. The Pt@MWCNT-DHBI surfactant sensor had superior response properties, including a Nernstian response to SDS (59.1 mV/decade) and a near-Nernstian response to DBS (57.5 mV/decade), with linear response regions for both anionic surfactants down to ≈2 × 10-6 M. The Pt@MWCNT-DHBI was also useful in critical micellar concentration (CMC) detection. Common anions showed very low interferences with the sensor. The sensor was successfully employed for the potentiometric titration of a technical grade cationic surfactant with good recoveries. The content of cationic surfactants was measured in six samples of complex commercial detergents. The Pt@MWCNT-DHBI surfactant sensor showed good agreement with the ISE surfactant sensor and classical two-phase titration and could be used as an analytical tool in quality control.

Synthesis and Characterization of Vanadium Nitride/Carbon Nanocomposites.

The present work focuses on the synthesis of a vanadium nitride (VN)/carbon nanocomposite material via the thermal decomposition of vanadyl phthalocyanine (VOPC). The morphology and chemical structure of the synthesized compounds were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoemission spectroscopy (XPS). The successful syntheses of the VOPC and non-metalated phthalocyanine (H2PC) precursors were confirmed using FTIR and XRD. The VN particles present a needle-like morphology in the VN synthesized by the sol-gel method. The morphology of the VN/C composite material exhibited small clusters of VN particles. The XRD analysis of the thermally decomposed VOPC indicated a mixture of amorphous carbon and VN nanoparticles (VN(TD)) with a cubic structure in the space group FM-3M consistent with that of VN. The XPS results confirmed the presence of V(III)-N bonds in the resultant material, indicating the formation of a VN/C nanocomposite. The VN/C nanocomposite synthesized through thermal decomposition exhibited a high carbon content and a cluster-like distribution of VN particles. The VN/C nanocomposite was used as an anode material in LIBs, which delivered a specific capacity of 307 mAh g-1 after 100 cycles and an excellent Coulombic efficiency of 99.8 at the 100th cycle.

Pyrolyzed magnetic NiO/carbon-derived nanocomposite from a hierarchical nickel-based metal-organic framework with ultrahigh adsorption capacity.

Herein, a simple one-pot solvothermal approach is used to create magnetic porous carbon nanocomposites which obtained from a nickel-based metal-organic framework (Ni-MOF) and examined for their ability to uptake methyl orange (MO) dye. Derived carbons with exceptional porosity and magnetic properties were created during the different pyrolysis temperatures of Ni-MOF (700, 800, and 900 °C) under a nitrogen atmosphere. The black powders were given the names CDM-700, CDM-800, and CDM-900 after they were obtained. A variety of analysis methods, including FESEM, EDS, XRD, FTIR, VSM, and N2 adsorption-desorption were used to characterize as-prepared powders. Furthermore, adsorbent dosage, contact time, pH variation, and initial dye concentration effects was investigated. The maximum adsorption capacities were 307.38, 5976.35, 4992.39, and 2636.54 mg/g for Ni-MOF, CDM-700, CDM-800, and CDM-900, respectively, which show the ultrahigh capacity of the resulted nanocomposites compared to newest materials. The results showed that not only the crystallinity turned but also the specific surface area was increased about four times after pyrolyzing. The results showed that the maximum adsorption capacity of MO dye for CDM-700 was obtained at adsorbent dosage of 0.083 g/L, contact time of 60 min, feed pH of 3, and temperature of 45 °C. The Langmuir model has the best match and suggests the adsorption process as a single layer. According to the results of reaction kinetic studies using well-known models, the pseudo-second-order model (R2 = 0.9989) displayed high agreement with the experimental data. The synthesized nanocomposite is introduced as a promising superadsorbent for eliminating dyes from contaminated water due to strong recycling performance up to the fifth cycle.

Polyaniline-co-polyindole functionalized magnetic porous carbon derived from MIL-53(Fe) for separation/enrichment of nitrophenols pollutants before determination with high-performance liquid chromatography-ultraviolet detection.

Herein, a novel polyaniline-co-polyindole functionalized magnetic porous carbon derived from MIL-53(Fe) was prepared and employed as an excellent nano-adsorbent to preconcentrate trace amounts of nitro-phenols in water and wastewater samples. Briefly, magnetic MIL-53(Fe) was synthesized by the addition of magnetite nanoparticles, terephthalic acid, and FeCl3 to the reaction medium. The magnetic MIL-53(Fe) was pyrolyzed under nitrogen protection to obtain a magnetic porous carbon nanocomposite, and finally, the nanomaterial was functionalized with polyaniline-co-polyindole via oxidation polymerization. The obtained nano-adsorbent was characterized via X-ray diffraction, Fourier-transform infrared spectroscopy, vibrating sample magnetometry, and transmission and scanning electron microscopies. After that, the fabricated nano-material was utilized as an excellent nano-adsorbent for the preconcentration of trace nitro-phenols (2-nitrophenol, 4-nitrophenol, and 2,4-dinitrophenol) in environmental water, and wastewater samples. The detection limits were obtained from 0.1 to 0.15 µg/L after performing the optimization process. The new method was in the range of 0.4-300 µg/L. The proposed method exhibited a good precision from 3.2% to 9.6% for within-day assay, and 5.2%-13.2% for between-day assay at three concentration levels (1, 50, and 250 µg/L). Eventually, this method was utilized to preconcentrate/determine the target analytes in three water, and wastewater samples, satisfactory (relative standard deviations, 5.4%-9.3%; relative recovery, 88%-109%).

Electrochemical determination of thiethylperazine using semi-graphitized carbon nanofibers-MnO nanocomposite.

A new voltammetric method is proposed for high sensitive thiethylperazine (THP) determination, using a glassy carbon electrode modified with semi-graphitized carbon nanofibers/MnO nanocomposite (eCNF/MnO/GC). To the best of our knowledge, this is the first electrochemical assay of THP  determination, and the first use of the eCNF/MnO as the electrode modifier. The proposed method using eCNF/MnO/GC is characterized by high repeatability and sensitivity of measurements, with the linearity of THP in the range from 0.05 to 2.2 µmol L-1. The lowest detection limit achieved on the eCNF/MnO/GC electrode for 30 s of preconcentration was 6.3 nmol L-1 THP in 0.05 mol L-1 acetate buffer of  pH 5.6. The proposed method was successfully applied to highly sensitive THP determination in complex matrices, such as tablets and plasma with good recovery (98-103%). The RSD value obtained for THP measurement at a concentration of 0.1 µmol L-1 was 1.3%. Amperometric measurements of THP under the flow injection conditions were also performed to indicate the possibility of its fast and accurate determination (103% and 95% for unmodified and modified electrode, respectively), with the duration of single analysis of approx. 30 s.

Multifunctional Hollow Porous Fe3O4@N-C Nanocomposites as Anodes of Lithium-Ion Battery, Adsorbents and Surface-Enhanced Raman Scattering Substrates.

At present, it is still a challenge to prepare multifunctional composite nanomaterials with simple composition and favorable structure. Here, multifunctional Fe3O4@nitrogen-doped carbon (N-C) nanocomposites with hollow porous core-shell structure and significant electrochemical, adsorption and sensing performances were successfully synthesized through the hydrothermal method, polymer coating, then thermal annealing process in nitrogen (N2) and lastly etching in hydrochloric acid (HCl). The morphologies and properties of the as-obtained Fe3O4@N-C nanocomposites were markedly affected by the etching time of HCl. When the Fe3O4@N-C nanocomposites after etching for 30 min (Fe3O4@N-C-3) were applied as the anodes for lithium-ion batteries (LIBs), the invertible capacity could reach 1772 mA h g-1 after 100 cycles at the current density of 0.2 A g-1, which is much better than that of Fe3O4@N-C nanocomposites etched, respectively, for 15 min and 45 min (948 mA h g-1 and 1127 mA h g-1). Additionally, the hollow porous Fe3O4@N-C-3 nanocomposites also exhibited superior rate capacity (950 mA h g-1 at 0.6 A g-1). The excellent electrochemical properties of Fe3O4@N-C nanocomposites are attributed to their distinctive hollow porous core-shell structure and appropriate N-doped carbon coating, which could provide high-efficiency transmission channels for ions/electrons, improve the structural stability and accommodate the volume variation in the repeated Li insertion/extraction procedure. In addition, the Fe3O4@N-C nanocomposites etched by HCl for different lengths of time, especially Fe3O4@N-C-3 nanocomposites, also show good performance as adsorbents for the removal of the organic dye (methyl orange, MO) and surface-enhanced Raman scattering (SERS) substrates for the determination of a pesticide (thiram). This work provides reference for the design and preparation of multifunctional materials with peculiar pore structure and uncomplicated composition.

IR792-MCN@ZIF-8-PD-L1 siRNA drug delivery system enhances photothermal immunotherapy for triple-negative breast cancer under near-infrared laser irradiation.

BACKGROUND: Despite extensive investigations on photothermal therapy, the clinical application is restricted due to poor stability, low therapeutic efficacy of photothermal therapy agents and its affinity loss in the multistep synthesis of delivery carriers. To address this, we designed an IR792-MCN@ZIF-8-PD-L1 siRNA (IM@ZP) nanoparticle drug delivery system. IM@ZP was prepared by in situ synthesis and physical adsorption, followed by characterization. Photothermal conversion ability of IM@ZP was assessed by irradiation of near-infrared (NIR) laser, followed by analysis of its effect on 4T1 cell viability, maturation of dendritic cells (DCs) and the secretion of related cytokines in vitro, and the changes of tumor infiltrating T cells and natural killer (NK) cells in vivo. Subcutaneous 4T1 tumor-bearing mouse and lung metastasis models were established to investigate the role of IM@ZP in killing tumor and inhibiting metastasis in vivo. RESULTS: IM@ZP was uniform nanoparticles of 81.67 nm with the characteristic UV absorption peak of IR792, and could effectively adsorb PD-L1 siRNA. Under the irradiation of 808 nm laser, IM@ZP exhibited excellent photothermal performance. IM@ZP could be efficiently uptaken by 4T1 cells, and had high transfection efficiency of PD-L1 siRNA. Upon NIR laser irradiation, IM@ZP effectively killed 4T1 cells, upregulated HSP70 expression, induced DC maturation and increased secretion of TNF-α and IL-6 in vitro. Moreover, in vivo experimental results revealed that IM@ZP enhanced photothermal immunotherapy as shown by promoted tumor infiltrating CD8 + and CD4 + T cells and NK cells, and inhibited tumor growth and lung metastasis. CONCLUSION: Together, biocompatible IM@ZP nanoparticles result in high photothermal immunotherapy efficiency and may have a great potential as a delivery system for sustained cancer therapy.

Synthesis and characterization of magnetite carbon nanocomposite from agro waste as chromium adsorbent for effluent treatment.

The waste water released from industries which contain pollutants like heavy metals, dyes and other toxic chemicals brings numerous harms to the ecosystem and humans. Nowadays the nanocomposites based technologies are effectively used for environmental remediation. In the present study, hexavalent chromium was removed from the industrial effluent using magnetite carbon nanocomposite. The nanocomposite composed of highly porous carbon and iron oxide nanoparticles prepared by using agrowastes (sugarcane bagasse and orange peel extract). Iron oxide nanoparticles (FeONPs) formation was confirmed by UV-visible spectroscopy; incorporation of magnetite with highly porous carbon was established by Fourier Transforms Infrared Spectroscopy and X-ray Diffraction Spectroscopy. Morphological features of magnetite nanoparticles and highly porous carbon were analyzed using Scanning Electron Microscope and Transmission Electron Microscope. Magnetic properties analyzed by Vibrating Sample Magnetometer revealed magnetite carbon nanocomposite exhibited better Ms value than highly porous carbon. The concentration of Cr6+ in treated effluent was determined using Atomic Absorption Spectroscopy. Pseudo-second order equation fitted with kinetics and the Langmuir monolayer favors for isotherm. This study reveals efficiency in Cr6+ removal from effluent using magnetite carbon nanocomposites which extends their application in waste water treatment.

Simultaneous extraction of 32 polychlorinated biphenyls by using magnetic carbon nanocomposite based dispersive microextraction, subsequent dispersive liquid-liquid microextraction with two miscible stripping solvents, and quantitation by GC-µECD.

A highly sensitive new method is described for performing dispersive microextractions. It is making use of a magnetic carbon nanocomposite and two miscible organic solvents. The method was applied to simultaneous extraction of 32 polychlorinated biphenyls (PCBs) prior to their quantitation by gas chromatography with electron capture detection. The effects of pH value of sample for both micro solid phase extraction and dispersive liquid-liquid microextraction, of the amount of sorbent, extraction time, type and volume of the miscible organic solvents and of salt addition were optimized. Figures of merit obtained under optimized conditions (sample solution: 500 ml, volume of disperser solvent, ACN, 1.5 mL; volume of extraction solvent, TCB, 30 µL; extraction time: 50 min, 20 mg magnetic sorbent, centrifuge, 5 min, 4000 rpm), include (a) preconcentration factors between 10,880 and 34,000; (b) repeatabilities of ≤14.9%, (c) detection limits between 0.01 and 0.2 ng kg-1, and (d) linear dynamic ranges from 0.05 to 100 ng kg - 1. The method was applied to the simultaneous analysis of residues in (spiked) real samples of fish, milk, packing sheet, and tap waters. Some of the analytes were found to be present in fish samples. The method is simple, rapid, and more sensitive than any of the previously reported ones. Graphical abstract Schematic presentation of simultaneous extraction of 32 polychlorinated biphenyls (PCBs) by using magnetic carbon nanocomposites (MCNs) based dispersive microextraction (M-SPE), subsequent dispersive liquid-liquid microextraction (DLLME) with two miscible stripping solvents, and quantitation by GC-µECD.

A method for optical imaging and monitoring of the excretion of fluorescent nanocomposites from the body using artificial neural networks.

In this study, a new approach to the implementation of optical imaging of fluorescent nanoparticles in a biological medium using artificial neural networks is proposed. The studies were carried out using new synthesized nanocomposites - nanometer graphene oxides, covered by the poly(ethylene imine)-poly(ethylene glycol) copolymer and by the folic acid. We present an example of a successful solution of the problem of monitoring the removal of nanocomposites based on nGO and their components with urine using fluorescent spectroscopy and artificial neural networks. However, the proposed method is applicable for optical imaging of any fluorescent nanoparticles used as theranostic agents in biological tissue.

Controllable Synthesis of Mesoporous Peapod-like Co3O4@Carbon Nanotube Arrays for High-Performance Lithium-Ion Batteries.

Transition metal oxides are regarded as promising anode materials for lithium-ion batteries because of their high theoretical capacities compared with commercial graphite. Unfortunately, the implementation of such novel anodes is hampered by their large volume changes during the Li(+) insertion and extraction process and their low electric conductivities. Herein, we report a specifically designed anode architecture to overcome such problems, that is, mesoporous peapod-like Co3O4@carbon nanotube arrays, which are constructed through a controllable nanocasting process. Co3O4 nanoparticles are confined exclusively in the intratubular pores of the nanotube arrays. The pores between the nanotubes are open, and thus render the Co3O4 nanoparticles accessible for effective electrolyte diffusion. Moreover, the carbon nanotubes act as a conductive network. As a result, the peapod-like Co3O4 @carbon nanotube electrode shows a high specific capacity, excellent rate capacity, and very good cycling performance.

Controlled Alignment of Carbon Black Nanoparticles in Electrospun Carbon Nanofibers for Flexible Films.

Carbon nanofiber (CNF) films or mats have great conductivity and thermal stability and are widely used in different technological processes. Among all the fabrication methods, electrospinning is a simple yet effective technique for preparing CNF mats, but the electrospun CNF mats are often brittle. Here, we report a feasible protocol by which to control the alignment of carbon black nanoparticles (CB NPs) within CNF to enhance the flexibility. The CB NPs (~45 nm) are treated with non-ionic surfactant Triton-X 100 (TX) prior to being blended with a solution containing poly(vinyl butyral) and polyacrylonitrile, followed by electrospinning and then carbonization. The optimized CB-TX@CNF mat has a boosted elongation from 2.25% of pure CNF to 2.49%. On the contrary, the untreated CB loaded in CNF displayed a lower elongation of 1.85% because of the aggregated CB spots created weak joints. The controlled and uniform dispersion of CB NPs helped to scatter the applied bending force in the softness test. This feasible protocol paves the way for using these facile surface-treated CB NPs as a commercial reinforcement for producing flexible CNF films.

A Carbon Nanocomposite Material Used in the Physical Modelling of the Overburden Subsidence Process.

Carbon nanomaterial is widely used in structural health monitoring due to the advantage of sensitivity and good mechanical properties. This study presents a novel approach employing carbon nanocomposite materials (CNMs) to characterize deformation and damage evolution in physical modelling. As the primary measurement method, the CNM is used to investigate the deformation characteristics of a 200-400 m thick sandstone bed at a 1 km deep longwall mine. The sandstone unit is identified as an ultra-thick key stratum (UTKS), with its thicknesses varying across different mining panels of the UTKS. The results of CNM monitoring show that the UTKS remains stable even after a consecutive excavation of 900 m in width. This stability impedes the upward propagation of overlying strata failure, leading to minimal surface subsidence. The study demonstrates the huge potential of CNM in the mining area, which can be useful for investigating material damage in physical modelling studies. The findings suggest that the cumulative extraction width in individual mining areas of the mine should be controlled to avoid a sudden collapse of the UTKS, and that special attention should be paid to where the UTKS's thickness changes substantially. The substantial variation in UTKS thickness significantly impacts the pattern of overburden subsidence.

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms.

The metal catalysts X-Mo@MgO (X = Ni, Fe, Co) was studied as excellent catalyst for catalytic pyrolysis conversion of biomass and plastics into functional carbon nanocomposite. The proper reaction mechanism of the process was explored through the gas composition, and explored the bactericidal performance of functional carbon nanocomposite. The results showed that the Ni, Fe and Co-based catalysts elevated H2 gas yield reached to 57%, 34% and 44% as the addition of Mo, due to Mo or its oxide species for scission of small molecule compound. The introduction of NiMo@MgO catalyst produced lower CH4, and higher H2 and MWCNTs, which indicated that the formation of MWCNTs is mainly attributed to CH4 dehydrogenation. As a comparison, FeMo@MgO catalyst for CO disproportionation reaction could generate more MWCNTs and lower H2. The functional carbon nanocomposite from FeMo@MgO catalyst were comprehensively evaluated by multiple characterizations. TPO and Raman results confirmed that FeMo@MgO catalyst can provide an excellent carrier to generate MWCNTs with few defects and high graphitization. The functional carbon nanocomposite were initially applied to E.coli extinguishing. The core-shell structure catalyst not only has excellent bactericidal performance, but also has strong resistance to metal leaching.

Application of magnetic carbon nanocomposite from agro-waste for the removal of pollutants from water and wastewater.

Water pollution has significant impact on water usage, and various contaminants, such as organic and inorganic compounds, heavy metals, dyes, pharmaceuticals compounds, pathogens and radioactive compounds, are implicated. The quest for globalisation, structural developments and other related anthropogenic activities promote the release of contaminants that induce water pollution. Hence, treatment and remediation options that can remove pollutants from watercourses and wastewater have been developed. Applied nanotechnology using carbon nanocomposites has recently drawn attention because it has the advantages of low preparation cost, high surface area, pore volume and environmental stability. Magnetic carbon nanocomposites usually exhibit excellent performance in adsorbing contaminants from aqueous solutions, and thus expanding the use of nanotechnology in water treatment is of great importance. Therefore, this review explores the geographical outlook of water pollution, sources of water pollution and types of contaminants found in water and discusses the use of carbon nanocomposites as an emerging sustainable technology for water pollutant removal. The various properties of carbon-based composites influence the extent of pollutant adsorption during water treatment processes. Most carbon-based nanocomposites are generated from biomass produced by agro-waste materials. Magnetic activated carbon nanocomposites produced from walnut shells and rice husk waste can remove 78% of Cd(II) from contaminated aqueous systems. Magnetic nanocomposites from peanut shell, tea waste, curcumin nanoparticles, sunflower head waste, rice husk, hydrophyte biomass, palm waste and sugarcane bagasse facilitate hydrothermal carbonisation, chemical precipitation, co-precipitation, chemical activation, calcination and fast pyrolysis. These nanocomposites have benefitted wastewater treatment by increasing efficiency in removing pharmaceutical, dye and organic contaminants, such as promazine, ciprofloxacin, amoxicillin, rhodamine 6G, methyl blue, phenol and phenanthrene. Hence, this review discusses the relatively low costs, good biocompatibility, large surface-to-volume ratio, magnetic separation capability and reusability carbon materials and highlights the advantages of using magnetic carbon nanocomposites in the removal of contaminants from water or wastewater through adsorption mechanisms.

Modification strategies of membranes with enhanced Anti-biofouling properties for wastewater Treatment: A review.

This review addresses composite membranes used for wastewater treatment, focusing heavily on the anti-biofouling properties of such membranes. Biofouling caused by the development of a thick biofilm on the membrane surface is a major issue that reduces water permeance and reduces its lifetime. Biofilm formation and adhesion are mitigated by modifying membranes with two-dimensional or zero-dimensional carbon-based nanomaterials or their modified substituents. In particular, nanomaterials based on graphene, including graphene oxide and carbon quantum dots, are mainly used as nanofillers in the membrane. Functionalization of the nanofillers with various organic ligands or compositing the nanofiller with other materials, such as silver nanoparticles, enhances the bactericidal ability of composite membranes. Moreover, such membrane modifications reduce biofilm adhesion while increasing water permeance and salt/dye rejection. This review discusses the recent literature on developing graphene oxide-based and carbon quantum dot-based composite membranes for biofouling-resistant wastewater treatment.

Carbon nanomaterials for the detection of pesticide residues in food: A review.

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

Metal-organic aerogel derived hierarchical porous metal-carbon nanocomposites as efficient bifunctional electrocatalysts for overall water splitting.

An efficient strategy to construct non-noble metal-base electrocatalysts for water splitting is the direct carbonization of metal-organic aerogel composites. Herein for the first time, a novel tube-like metal-carbon nanocomposite with encapsulated small-size individual Fe, Cr and Ni nanoparticles, is prepared by the carbonization of a FeCr-doped Ni-benzenetricarboxylate aerogel. The slender skeleton of the aerogel, supercritical drying and Cr doping alleviates metal aggregation and facilitates the in-situ growth of carbon tubes. This nanocomposite exhibits remarkably low overpotential of the hydrogen evolution reaction (137 mV) and oxygen evolution reaction (220 mV). Further, the cell voltage could be as low as 1.54 V with the current density of 10 mA cm-2 and illustrates excellent stability under a continuous operation for 50 h. This non-noble metal-base electrocatalyst is comparable to noble metal-based electrocatalysts and the impressive performance is ascribed to the abundant active catalytic sites and short reactant diffusion pathways. This work demonstrates great capability of aerogel derivation in the highly active electrocatalyst design for promising electrochemical applications.

Recent Development in Vanadium Pentoxide and Carbon Hybrid Active Materials for Energy Storage Devices.

With the increasing energy demand for portable electronics, electric vehicles, and green energy storage solutions, the development of high-performance supercapacitors has been at the forefront of energy storage and conversion research. In the past decade, many scientific publications have been dedicated to designing hybrid electrode materials composed of vanadium pentoxide (V2O5) and carbon nanomaterials to bridge the gap in energy and power of traditional batteries and capacitors. V2O5 is a promising electrode material owing to its natural abundance, nontoxicity, and high capacitive potential. However, bulk V2O5 is limited by poor conductivity, low porosity, and dissolution during charge/discharge cycles. To overcome the limitations of V2O5, many researchers have incorporated common carbon nanostructures such as reduced graphene oxides, carbon nanotubes, carbon nanofibers, and other carbon moieties into V2O5. The carbon components facilitate electron mobility and act as porous templates for V2O5 nucleation with an enhanced surface area as well as interconnected surface morphology and structural stability. This review discusses the development of various V2O5/carbon hybrid materials, focusing on the effects of different synthesis methods, V2O5/carbon compositions, and physical treatment strategies on the structure and electrochemical performance of the composite material as promising supercapacitor electrodes.

In-situ synthesis of CuS@carbon nanocomposites and application in enhanced photo-fenton degradation of 2,4-DCP.

Novel CuS nanoparticles embedded into carbon nanosheets (CuS@CNs) were prepared in situ by applying wheat straw cellulose/feather protein hydrogel beads as templates and were used to photocatalytically activate H2O2 to degrade 2,4-dichlorphenol (2,4-DCP). The photo-Fenton catalytic properties of the nanocomposite catalysts obtained under different synthetic conditions, including different Cu2+ concentrations, S2- concentrations and calcination temperatures, were evaluated. The results showed that CuS@CNs with 0.1 M Cu2+, 0.1 M S2- at 800 °C presented excellent photo-Fenton degradation performance for 2,4-DCP (25 mg/L) in the presence of H2O2 and could remove 90% of 2,4-DCP in 2.5 h. The water quality parameters (pH, Cl-, HCO3-, H2PO4- and SO42-) exhibited different effects on the photocatalytic degradation process. The catalytic activity of the CuS@CNs used in the cycle could be recovered after thermal regeneration. Radical quenching and electron paramagnetic resonance (EPR) experiments confirmed that ·OH species were main active radicals contributing to the degradation of 2,4-DCP. The photocatalytic mechanism of CuS@CNs was also explored by photoelectrochemical (PEC) measurements and UV-vis diffuse reflectance spectroscopy (DRS). Incorporation of carbon nanosheets could significantly improve the separation of photogenerated charge carriers to stimulate pollutant degradation by CuS. Based on the detected intermediates, the degradation pathway of 2,4-DCP in the CuS@CNs/H2O2 reaction system was also proposed.