Unique insights into the design of low-strain single-crystalline Ni-rich cathodes with superior cycling stability.

Micro-sized single-crystalline Ni-rich cathodes are emerging as prominent candidates owing to their larger compact density and higher safety compared with poly-crystalline counterparts, yet the uneven stress distribution and lattice oxygen loss result in the intragranular crack generation and planar gliding. Herein, taking LiNi0.83Co0.12Mn0.05O2 as an example, an optimal particle size of 3.7 µm is predicted by simulating the stress distributions at various states of charge and their relationship with fracture free-energy, and then, the fitted curves of particle size with calcination temperature and time are further built, which guides the successful synthesis of target-sized particles (m-NCM83) with highly ordered layered structure by a unique high-temperature short-duration pulse lithiation strategy. The m-NCM83 significantly reduces strain energy, Li/O loss, and cationic mixing, thereby inhibiting crack formation, planar gliding, and surface degradation. Accordingly, the m-NCM83 exhibits superior cycling stability with highly structural integrity and dual-doped m-NCM83 further shows excellent 88.1% capacity retention.

Rational Design of Naphthol Groups Functionalized Bipolar Polymer Cathodes for High Performance Alkali-Ion Batteries.

Redox-active organic compounds gather significant attention for their potential application as electrodes in alkali ion batteries, owing to the structural versatility, environmental friendliness, and cost-effectiveness. However, their practical applications of such compounds are impeded by insufficient active sites with limited capacity, dissolution in electrolytes, and sluggish kinetics. To address these issues, a naphthol group-containing triarylamine polymer, namely poly[6,6'-(phenylazanediyl)bis(naphthol)] (poly(DNap-OH)) is rationally designed and synthesized, via oxidative coupling polymerization. It is capable of endowing favorable steric structures that facilitate fast ion diffusion, excellent chemical stability in organic electrolytes, and additional redox-active sites that enable a bipolar redox reaction. By exploiting these advantages, poly(DNap-OH) cathodes demonstrate remarkable cycling stability in both lithium-ion batteries (LIBs) and potassium-ion batteries (PIBs), showcasing enhanced specific capacity and redox reaction kinetics in comparison to the conventional poly(4-methyltriphenylamine) cathodes. Overall, this work offers insights into molecular design strategies for the development of high-performance organic cathodes in alkali-ion batteries.

Organic Intercalation Induced Kinetic Enhancement of Vanadium Oxide Cathodes for Ultrahigh-Loading Aqueous Zinc-Ion Batteries.

Vanadium-based oxides have attracted much attention because of their rich valences and adjustable structures. The high theoretical specific capacity contributed by the two-electron-transfer process (V5+ /V3+ ) makes it an ideal cathode material for aqueous zinc-ion batteries. However, slow diffusion kinetics and poor structural stability limit the application of vanadium-based oxides. Herein, a strategy for intercalating organic matter between vanadium-based oxide layers is proposed to attain high rate performance and long cycling life. The V3 O7 ·H2 O is synthesized in situ on the carbon cloth to form an open porous structure, which provides sufficient contact areas with electrolyte and facilitates zinc ion transport. On the molecular level, the added organic matter p-aminophenol (pAP) not only plays a supporting role in the V3 O7 ·H2 O layer, but also shows a regulatory effect on the V5+ /V4+ redox process due to the reducing functional group on pAP. The novel composite electrode with porous structure exhibits outstanding reversible specific capacity (386.7 mAh g-1 , 0.1 A g-1 ) at a high load of 6.5 mg cm-2 , and superior capacity retention of 80% at 3 A g-1 for 2100 cycles.

Effect of Oxidative Synthesis Conditions on the Performance of Single-Crystalline LiMn2- x Mx O4 (M = Al, Fe, and Ni) Spinel Cathodes in Lithium-Ion Batteries.

LiMn2 O4 (LMO) spinel cathode materials attract much interest due to the low price of manganese and high power density for lithium-ion batteries. However, the LMO cathodes suffer from the Mn dissolution problem at particle surfaces, which accelerates capacity fade. Herein, the authors report that the oxidative synthesis condition is a key factor in the cell performance of single-crystalline LiMn2- x Mx O4 (0.03 ≤ x ≤ 0.1, M = Al, Fe, and Ni) cathode materials prepared at 1000 °C. The use of oxygen flow during the spinel-phase formation minimizes the presence of oxygen vacancies generated at 1000 °C, thereby yielding a stoichiometrically doped LMO product; otherwise, the spinel cathode prepared in atmospheric air readily loses capacity due to the oxygen vacancies in the structure. As a way of circumventing the use of oxygen flow, a one-pot, two-step heating in air at 1000 °C and subsequently at 600 °C is used to yield the stoichiometric LMO product. The lithiation heating at 1000-600 °C resulted in a significant improvement in the cycling stability of the prepared LMO cathode in graphite-based full cells. This study on oxidative synthesis conditions also confirms the advantage of minimizing the surface area of the cathode particles.

An Organic Molecular Cathode Composed of Naphthoquinones Bridged by Organodisulfide for Rechargeable Lithium Battery.

Organic electrodes that embrace multiple electron transfer and efficient redox reactions are desirable for green energy storage batteries. Here, a novel organic electrode material is synthesized, i.e., 2, 2'-((disulfanediylbis (4, 1-phenylene)) bis(azanediyl)) bis (naphthalene-1, 4-dione) (MNQ), through a simple click reaction between common carbonyl and organosulfur compounds and demonstrate its application potential as a high-performance cathode material in rechargeable lithium batteries. MNQ exhibits the aggregation effect of redox-active functional groups, the advantage of fast reaction kinetics from molecular structure evolution, and the decreased solubility in aprotic electrolytes resulting from intermolecular interactions. As expected, the MNQ electrode exhibits a high initial discharge capacity of 281.2 mA h g-1 at 0.5 C, equivalent to 97.9% of its theoretical capacity, and sustains stable long-term cycling performance of over 1000 cycles at 1 C. This work adds a new member to the family of organic electrode materials, providing performance-efficient organic molecules for the design of rechargeable battery systems, which will undoubtedly spark great interest in their applications.

Advanced Polymers in Cathodes and Electrolytes for Lithium-Sulfur Batteries: Progress and Prospects.

Lithium-sulfur (Li-S) batteries, which store energy through reversible redox reactions with multiple electron transfers, are seen as one of the promising energy storage systems of the future due to their outstanding advantages. However, the shuttle effect, volume expansion, low conductivity of sulfur cathodes, and uncontrollable dendrite phenomenon of the lithium anodes have hindered the further application of Li-S batteries. In order to solve the problems and clarify the electrochemical reaction mechanism, various types of materials, such as metal compounds and carbon materials, are used in Li-S batteries. Polymers, as a class of inexpensive, lightweight, and electrochemically stable materials, enable the construction of low-cost, high-specific capacity Li-S batteries. Moreover, polymers can be multifunctionalized by obtaining rich structures through molecular design, allowing them to be applied not only in cathodes, but also in binders and solid-state electrolytes to optimize electrochemical performance from multiple perspectives. The most widely used areas related to polymer applications in Li-S batteries, including cathodes and electrolytes, are selected for a comprehensive overview, and the relevant mechanisms of polymer action in different components are discussed. Finally, the prospects for the practical application of polymers in Li-S batteries are presented in terms of advanced characterization and mechanistic analysis.

Construction of an Ohmic Contact Cathode by Two Metal Sulfides for efficient Capture and Catalysis of Polysulfide.

The slow reaction kinetics and severe shuttle effect of lithium polysulfide make Li-S battery electrochemical performance difficult to meet the demands of large electronic devices such as electric vehicles. Based on this, an electrocatalyst constructed by metal phase material (MoS2) and semiconductor phase material (SnS2) with ohmic contact is designed for inhibiting the dissolution of lithium polysulfide with improving the reaction kinetics. According to the density-functional theory calculations, it is found that the heterostructured samples with ohmic contacts can effectively reduce the reaction-free energy of lithium polysulfide to accelerate the sulfur redox reaction, in addition to the excellent electron conduction to reduce the overall activation energy. The metallic sulfide can add more sulfophilic sites to promote the capture of polysulfide. Thanks to the ohmic contact design, the carbon nanotube-MoS2-SnS2 achieved a specific capacity of 1437.2 mAh g-1 at 0.1 C current density and 805.5 mAh g-1 after 500 cycles at 1 C current density and is also tested as a pouch cell, which proves to be valuable for practical applications. This work provides a new idea for designing an advanced and efficient polysulfide catalyst based on ohmic contact.

Designing Urchin-Like S@SiO2 with Regulated Pores Toward Ultra-Fast Room Temperature Sodium-Sulfur Battery.

Captured by high theoretical capacity and low-cost, Sodium-Sulfur (Na-S) batteries have been deemed as promising energy-storage systems. However, their electrochemical properties, containing both cycling and rate properties, still suffer from the notorious "shuttle effect" of polysulfide. Herein, through the effective regulation of pore sizes, a series of S@SiO2 cathode materials are obtained. Benefitting from the abundant pore channels of SiO2 particles, the sulfur loading is as high as 76.3%. Importantly, a suitable pore size can lead to adequate reaction and rapid diffusion behaviors, resulting in excellent electrochemical performances. Specifically, at 2.0 A g-1, the initial capacity of the as-optimized sample can be up to 1370.6 mAh g-1. Surprisingly, even after 1050 cycles, it could achieve a high reversible capacity of 1280.8 mAh g-1 with an attenuation rate of 0.089%. At 5.0 A g-1, after 500 cycles, the capacity can still remain ≈ 1132.6 mAh g-1 (capacity retention rate, 97.5%). Given this, the work is anticipated to offer an effective strategy for advanced electrodes for Na-S batteries.

Air-Stable Na3.5C6O6 as a Sodium Compensation Additive in Cathode of Na-Ion Batteries.

Sodium-ion battery (SIB) is a candidate for the stationary energy storage systems because of the low cost and high abundance of sodium. However, the energy density and lifespan of SIBs suffer severely from the irreversible consumption of the Na-ions for the formation of the solid electrolyte interphase (SEI) layer and other side reactions on the electrodes. Here, Na3.5C6O6 is proposed as an air-stable high-efficiency sacrificial additive in the cathode to compensate for the lost sodium. It is characteristic of low desodiation (oxidation) potential (3.4-3.6 V vs. Na+/Na) and high irreversible desodiation capacity (theoretically 378 mAh g-1). The feasibility of using Na3.5C6O6 as a sodium compensation additive is verified with the improved electrochemical performances of a Na2/3Ni1/3Mn1/3Ti1/3O2ǀǀhard carbon cells and cells using other cathode materials. In addition, the structure of Na3.5C6O6 and its desodiation path are also clarified on the basis of comprehensive physical characterizations and the density functional theory (DFT) calculations. This additive decomposes completely to supply abundant Na ions during the initial charge without leaving any electrochemically inert species in the cathode. Its decomposition product C6O6 enters the carbonate electrolyte without bringing any detectable negative effects. These findings open a new avenue for elevating the energy density and/or prolonging the lifetime of the high-energy-density secondary batteries.

Doping Regulation Stabilizing δ-MnO2 Cathode for High-Performance Aqueous Aluminium-ion Batteries.

δ-MnO2 is a promising cathode material for aqueous aluminium-ion batteries (AAIBs) for its layered crystalline structure with large interlayer spacing. However, the excellent Al ion storage performance of δ-MnO2 cathode remains elusive due to the frustrating structural collapse during the intercalation of high ionic potential Al ion species. Here, it is discovered that introducing heterogeneous metal dopants with high bond dissociation energy when bonded to oxygen can significantly reinforce the structural stability of δ-MnO2 frameworks. This reinforcement translates to stable cycling properties and high specific capacity in AAIBs. Vanadium-doped δ-MnO2 (V-δ-MnO2 ) can deliver a high specific capacity of 518 mAh g-1 at 200 mA g-1 with remarkable cycling stability for 400 cycles and improved rate capabilities (468, 339, and 285 mAh g-1 at 0.5, 1, and 2 A g-1 , respectively), outperforming other doped δ-MnO2 materials and the reported AAIB cathodes. Theoretical and experimental studies indicate that V doping can substantially improve the cohesive energy of δ-MnO2 lattices, enhance their interaction with Al ion species, and increase electrical conductivity, collectively contributing to high ion storage performance. These findings provide inspiration for the development of high-performance cathodes for battery applications.

Grafting a Polymer Coating Layer onto Li1.2 Ni0.13 Co0.13 Mn0.54 O2 Cathode by Benzene Diazonium Salts to Facilitate the Cycling Performance and High-Voltage Stability.

Li-rich Mn-based cathodes have been regarded as promising cathodes for lithium-ion batteries because of their low cost of raw materials (compared with Ni-rich layer structure and LiCoO2 cathodes) and high energy density. However, for practical application, it needs to solve the great drawbacks of Li-rich Mn-based cathodes like capacity degradation and operating voltage decline. Herein, an effective method of surface modification by benzene diazonium salts to build a stable interface between the cathode materials and the electrolyte is proposed. The cathodes after modification exhibit excellent cycling performance (the retention of specific capacity is 84.2% after 350 cycles at the current density of 1 C), which is mainly attributed to the better stability of the structure and interface. This work provides a novel way to design the coating layer with benzene diazonium salts for enhancing the structural stability under high voltage condition during cycling.

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries.

Employing high voltage cobalt-free spinel LiNi0.5 Mn1.5 O4 (LNMO) as a cathode is promising for high energy density and cost-effectiveness, but it has challenges in all-solid-state batteries (ASSBs). Here, it is revealed that the limitation of lithium argyrodite sulfide solid electrolyte (Li6 PS5 Cl) with the LNMO cathode is due to the intrinsic chemical incompatibility and poor oxidative stability. Through a careful analysis of the interphase of LNMO, it is elucidated that even the halide solid electrolyte (Li3 InCl6 ) with high oxidative stability can be decomposed to form resistive interphase layers with LNMO in ASSBs. Interestingly, with Fe-doping and a Li3 PO4 protective layer coating, LNMO with Li3 InCl6 displays stable cycle performance with a stabilized interphase at a high voltage (≈4.7 V) in ASSBs. The enhanced interfacial stability with the extended electrochemical stability window through doping and coating enables high electrochemical stability with LNMO in ASSBs. This work provides guidance for employing high-voltage cathodes in ASSBs and highlights the importance of stable interphases to enable stable cycling in ASSBs.

Tuning the Cathode-Electrolyte Interphase Chemistry with Multifunctional Additive for High-Voltage Li-Ion Batteries.

The utilization of layered oxides as cathode materials has significantly contributed to the advancement of the lithium-ion batteries (LIBs) with high energy density and reliability. However, the structural and interfacial instability triggered by side reactions when charged to high voltage has plagued their practical applications. Here, this work reports a novel multifunctional additive, id est, 7-Anilino-3-diethylamino-6-methyl fluoran (ADMF), which exhibits unique characteristics such as preferential adsorption, oxygen scavenging, and electropolymerization protection for high-voltage cathodes. The ADMF demonstrates the capability to ameliorate the growth of cathode-electrolyte interphase (CEI), effectively diminishing the dissolution of transition metal (TM) ions, reducing the interface impedance, and facilitating the Li+ transport. As a result, ADMF additive with side reaction-blocking ability significantly enhances the cycling stability of MCMB||NCM811 full-cells at 4.4 V and MCMB||LCO full-cells at 4.55 V, as evidenced by the 80% retention over 600 cycles and 87% retention after 750 cycles, respectively. These findings highlight the potential of the additive design strategy to modulate the CEI chemistry, representing a new paradigm with profound implications for the development of next-generation high-voltage LIBs.

Negatively Charged Hydrophobic Carbon Nano-Onion Interfacial Layer Enabling High-Rate and Ultralong-Life Zn-Based Energy Storage.

Zn-based electrochemical energy storage (EES) systems are attracting more attention, whereas their large-scale application is restricted by the dendrite and parasitic reaction-caused unstable Zn anodes. Herein, a negatively charged hydrophobic carbon nano-onion (CNO) interfacial layer is proposed to realize ultrastable and high-rate Zn anodes, enabling high-performance Zn-based EES. For the CNO interfacial layer, its hydrophobicity not only blocks active water but also reduces the Zn2+ desolvation barrier, and meanwhile, the negatively-charged CNO nanoparticles adsorb Zn2+ and repel SO4 2- to homogenize Zn2+ flux, accelerate Zn2+ desolvation and suppress the self-corrosion of Zn anodes. Besides, the conductive CNO interfacial layer increases the surface area for the Zn deposition to reduce local current density. Consequently, under the modulation of the CNO interfacial layer, Zn plating/stripping exhibits impressive reversibility with an average Coulombic efficiency of 99.4% over 800 cycles, and Zn anodes present significantly enhanced electrochemical stability and rate performance, whose operation lifetime exceeds 2000 h at 1 mA cm-2 and 350 h even at 10 mA cm-2 . Moreover, high-rate and ultralong-life Zn-ion hybrid supercapacitors are achieved with the CNO interfacial layer-modulated Zn anode and activated CNO cathode. This work provides new thinking in regulating the Zn deposition interface to realize high-performance Zn-based EES.

Perovskite Oxides Alleviate Microstrain and Anion Loss of Radially-Aligned Ni-Rich Ncm811 Cathodes under High-Voltage Operations.

The energy density of Ni-rich cathodes is expected to be further unlocked by increasing the cut-off voltage to above 4.3 V, which nevertheless come with significantly increased irreversible phase transition and abundant side reactions. In this study, the perovskite oxides enhanced radial-aligned LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) cathodes are reported, in which the coherent-growth La2 [LiTM]O4 clusters are evenly riveted into the crystals and the stable Lax Ca1- x [TM]O3- x protective layer is concurrently formed on the surface. The reciprocal interactions greatly reduce the lattice strain during de-/lithiation. Meantime, the abundant oxygen vacancies of the coating layer are proved to reversibly capture (state of charge) and re-release (state of discharge) the oxygen radicals, fully avoiding their correlative side reactions. The resultant NCM811 displays negligible O2 and CO2 emissions when charging to 4.5 V as well as a thinner CEI film, therefore delivering a large capacity of 225 mAh g-1 at 0.1C in coin-type half-cells and a high retention of 88.3% after 1000 cycles at 1C in pouch-type full-cells within 2.7-4.5 V. The development of high-voltage Ni-rich cathodes exhibits a highly effective pathway to further increase their energy density.

In Situ Fe-Substituted Hexacyanoferrate for High-Performance Aqueous Potassium Ion Batteries.

The eco-friendliness, safety, and affordability of aqueous potassium batteries (AKIBs) have made them popular for large-scale energy storage devices. However, the cycling and rate performance of research materials, particularly cobalt hexacyanoferrate, have yet to meet satisfactory standards. Herein, a room-temperature drafted K1.66 Fe0.25 Co0.75 [Fe(CN)6 ]·0.83H2 O (KFCHCF) sample is reported using an in situ substitution strategy. A higher concentration of ferrocyanide ions decreases the water content and increases the potassium content, while citric acid works as a chelating agent and is responsible for Fe-substitution in the KFCHCF sample. The resultant KFCHCF sample exhibits good rate performance, and about 97% and 90.6% of discharge capacity are conserved after 400 and 1000 cycles at 100 and 200 mA g-1 , respectively. The full cell using the KFCHCF cathode and 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide (PNTCDA) anode maintains ≈74.93% and 74.35% of discharge capacity at 200 mA g-1 and 1000 mA g-1 for 1000 and >10,000 cycles, respectively. Furthermore, ex situ characterizations demonstrate the high reversibility of K-ions and structural stability during the charge-discharge process. Such high performance is attributed to the fast K-ion migration and crystal structure stabilization caused by in situ Fe-substitution in the KFCHCF sample. Other hexacyanoferrates can be synthesized using this method and used in grid-scale storage systems.

Configurational Entropy Strategy Enhanced Structure Stability Achieves Robust Cathode for Aluminum Batteries.

Rechargeable aluminum batteries (RABs) are an emerging energy storage device owing to the vast Al resources, low cost, and high safety. However, the poor cyclability and inferior reversible capacity of cathode materials have limited the enhancement of RABs performance. Herein, a high configurational entropy strategy is presented to improve the electrochemical properties of RABs for the first time. The high-entropy (Fe, Mn, Ni, Zn, Mg)3 O4 cathode exhibits an ultra-stable cycling ability (109 mAh g-1 after 3000 cycles), high specific capacity (268 mAh g-1 at 0.5 A g-1 ), and rapid ion diffusion. Ex situ characterizations indicate that the operational mechanism of (Fe, Mn, Ni, Zn, Mg)3 O4 cathode is mainly based on the redox process of Fe, Mn, and Ni. Theoretical calculations demonstrate that the oxygen vacancies make a positive contribution to adjusting the distribution of electronic states, which is crucial for enhancing the reaction kinetics at the electrolyte and cathode interface. These findings not only propose a promising cathode material for RABs, but also provide the first elucidation of the operational mechanism and intrinsic information of high-entropy electrodes in multivalent ion batteries.

Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries.

Spinel-structured LiNix Mn2-x O4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn3 O4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.

Powering the Future: Unleashing the Potential of MXene-Based Dual-Functional Photoactive Cathodes in Photo-Rechargeable Zinc-Ion Capacitor.

Dual-functional photo-rechargeable (photo-R) energy storage devices, which acquire stored energy from solar energy harvesting, are being developed to battle the current energy crisis. In this study, these findings on the photo-driven characteristics of MXene-based photocathodes in photo-R zinc-ion capacitors (ZICs) are presented. Along with the pristine Ti3 C2 Tx MXene, tellurium/Ti3 C2 Tx (Te/Ti3 C2 Tx ) hybrid nanostructure is synthesized via facile chemical vapor transport technique to examine them for photocathodes in ZICs. Interestingly, the evaluated self-powered photodetector devices using MXene-based samples revealed a pyro-phototronic behavior introduced into the samples, with higher desirability observed in Te/Ti3 C2 Tx . The photo-R ZICs results exhibited a capacitance enhancement of 50.86% for Te/Ti3 C2 Tx at two scan rates of 5 and 10 mV s-1 under illumination, compared to dark conditions. In contrast, a capacitance enhancement of 30.20% is obtained for the pristine Ti3 C2 Tx at only a 5 mV s-1 scan rate. Furthermore, both samples achieved photo-charging voltage responses of ≈960 mV, and photoconversion efficiencies of 0.01% (for Te/ Ti3 C2 Tx ) and 0.07% (for Ti3 C2 Tx ). These characteristics in MXene-based single photo-R ZICs are significant and considerable with the distinguished integrated photo-R supercapacitors with solar cells, or coupled energy-harvesting and energy-storing devices reported recently in the literature.

Advances of Zn Metal-Free "Rocking-Chair"-Type Zinc Ion Batteries: Recent Developments and Future Perspectives.

Aqueous zinc ion battery (AZIBs) has attracted the attention of many researchers because of its safety, economy, environmental protection, and high ionic conductivity of electrolytes. However, the battery greatly suffers from zinc dendrite produced by zinc metal anode leading to poor cycle life and even unsafe problems, which limit its further development for various important applications. It is known that the success of the commercialization of lithium-ion batteries (LIBs) is mainly due to replacement of lithium metal anode with graphite, which avoids the formation of Li dendrite. Therefore, it is an important step to develop aqueous zinc ion anode to replace conventional zinc metal one with zinc-metal free anode material. In this review, the working principle and development prospect of "rocking-chair" AZIBs are introduced. The research progress of different types of zinc metal-free anode materials and cathode materials in "rocking-chair" AZIBs is reviewed. Finally, the limitations and challenges of the Zn metal-free "rocking-chair" AZIBs as well as solutions are deeply discussed, aiming to provide new strategies for the development of advanced zinc-ion batteries.