Prebiotic Astrochemistry from Astronomical Observations and Laboratory Spectroscopy.

The discovery of more than 200 gas-phase chemical compounds in interstellar space has led to the speculation that this nonterrestrial synthesis may play a role in the origin of life. These identifications were possible because of laboratory spectroscopy, which provides the molecular fingerprints for astronomical observations. Interstellar chemistry produces a wide range of small, organic molecules in dense clouds, such as NH2COCH3, CH3OCH3, CH3COOCH3, and CH2(OH)CHO. Carbon (C) is also carried in the fullerenes C60 and C70, which can preserve C-C bonds from circumstellar environments for future synthesis. Elusive phosphorus has now been found in molecular clouds, the sites of star formation, in the molecules PO and PN. Such clouds can collapse into solar systems, although the chemical/physical processing of the emerging planetary disk is uncertain. The presence of molecule-rich interstellar starting material, as well as the link to planetary bodies such as meteorites and comets, suggests that astrochemical processes set a prebiotic foundation.

Preservation of Topological Surface States in Millimeter-Scale Transferred Membranes.

Ultrathin topological insulator membranes are building blocks of exotic quantum matter. However, traditional epitaxy of these materials does not facilitate stacking in arbitrary orders, while mechanical exfoliation from bulk crystals is also challenging due to the non-negligible interlayer coupling therein. Here we liberate millimeter-scale films of the topological insulator Bi2Se3, grown by molecular beam epitaxy, down to 3 quintuple layers. We characterize the preservation of the topological surface states and quantum well states in transferred Bi2Se3 films using angle-resolved photoemission spectroscopy. Leveraging the photon-energy-dependent surface sensitivity, the photoemission spectra taken with 6 and 21.2 eV photons reveal a transfer-induced migration of the topological surface states from the top to the inner layers. By establishing clear electronic structures of the transferred films and unveiling the wave function relocation of the topological surface states, our work lays the physics foundation crucial for the future fabrication of artificially stacked topological materials with single-layer precision.

Emerging non-invasive microwave and millimeter-wave imaging technologies for food inspection.

The microwave and millimeter-wave (MMW) imaging technology is gaining increasing interest for food inspection. It allows for noninvasive, contactless, and fast scanning capabilities, while being cost-efficient and safe to human. This review paper introduces the fundamentals in the interaction of electromagnetic wave with food materials and the current MMW sensing and imaging systems used for foods. Then we present emerging technologies in MMW imaging for inspecting food quality and safety, aiming to meet the modern food industry's demand. According to the most recent technological advancements, it is expected that high-performance antenna, ultrawide bandwidth signal generation, nano-scale semiconductor technologies, radio frequency identification with inductance-capacitance resonator, and machine learning could significantly enhance the capabilities of MMW imaging systems for food inspection.

Electromagnetic field exposure monitoring of commercial 28-GHz band 5G base stations in Tokyo, Japan.

Fifth generation (5G) wireless communication is being rolled out around the world. In this work, the latest radio frequency electromagnetic field (EMF) exposure measurement results on commercial 28-GHz band 5G base stations (BSs) deployed in the urban area of Tokyo, Japan, are presented. The measurements were conducted under realistic traffic conditions with a 5G smartphone and using both omnidirectional and horn antennas. First and foremost, in all cases, the electric-field (E-field) intensity is much lower (<-38 dB) than the exposure limits. The E-field intensities for traffic-off cases do not show any significant difference between the two antennas with the maximum being 3.6 dB. For traffic-on cases, the omnidirectional antenna can undesirably capture the radio wave from the smartphone in some cases, resulting in a 7-13 dB higher E-field intensity than that using the horn antenna. We also present comparative results between 4G long term evolution BSs and sub-6-GHz band and 28-GHz band 5G BSs and provide recommendations on acquiring meaningful EMF exposure data. This work is a further step toward the standardization of the measurement method regarding quasi-millimeter/millimeter wave 5G BSs.

First noncontact millimeter-wave radar measurement of heart rate in great apes: Validation in chimpanzees (Pan troglodytes).

Heart rate is a crucial vital sign and a valuable indicator for assessing the physical and psychological condition of a target animal. Heart rate contributes to (1) fundamental information for cognitive research, (2) an indicator of psychological and physical stress, and (3) improving the animal welfare of captive animals, especially in nonhuman primate studies. Heart rate has been measured using a contact-type device; however, the device burdens the target animals and that there are risks associated with anesthesia during installation. This study explores the application of heartbeat measurement techniques using millimeter-wave radar, primarily developed for humans, as a remote and noninvasive method for measuring the heart rate of nonhuman primates. Through a measurement test conducted on two chimpanzees, we observed a remarkable correspondence between the peak frequency spectrum of heart rate estimated using millimeter-wave radar and the mean value obtained from electrocardiograph data, thereby validating the accuracy of the method. To the best of our knowledge, this is the first demonstration of the precise measurement of great apes' heart rate using millimeter-wave radar technology. Compared to heart rate measurement using video analysis, the method using millimeter-wave radar has the advantage that it is less susceptible to weather and lighting conditions and that measurement techniques for multiple individuals have been developed for human subjects, while its disadvantage is that validation of measurement from long distances has not been completed. Another disadvantage common to both methods is that measurement becomes difficult when the movement of the target individual is large. The possibility of noncontact measurement of heart rate in wild and captive primates will undoubtedly open up a new research area while taking animal welfare into consideration.

Synthesis of millimeter-scale ZIF-8 single crystals and their reversible crystal structure changes.

Among various metal-organic frameworks (MOFs), the zeolitic imidazole framework (ZIF), constructed by the regular arrangement of 2-methylimidazole and metal ions, has garnered significant attention due to its distinctive crystals and pore structures. Variations in the sizes and shapes of ZIF crystals have been reported by changing the synthesis parameters, such as the molar ratios of organic ligands to metal ions, choice of solvents, and temperatures. Nonetheless, the giant ZIF-8 single crystals beyond the typical range have rarely been reported. Herein, we present the synthesis of millimeter-scale single crystal ZIF-8 using the solvothermal method in N,N-diethylformamide. The resulting 1-mm single crystal is carefully characterized through N2 adsorption-desorption isotherms, scanning electron microscopy, and other analytical techniques. Additionally, single-crystal X-ray diffraction is employed to comprehensively investigate the framework's mobility at various temperatures.

Millimeter-sized ZIF-8 single crystals were synthesized using the solvothermal method. These crystals exhibit a notable BET surface area of 1681 m²âˆ™g⁻¹ and demonstrate a reversible change in their crystal structure.

Designing a Novel Hybrid Technique Based on Enhanced Performance Wideband Millimeter-Wave Antenna for Short-Range Communication.

This paper presents the design of a performance-improved 4-port multiple-input-multiple-output (MIMO) antenna proposed for millimeter-wave applications, especially for short-range communication systems. The antenna exhibits compact size, simplified geometry, and low profile along with wide bandwidth, high gain, low coupling, and a low Envelope Correlation Coefficient (ECC). Initially, a single-element antenna was designed by the integration of rectangular and circular patch antennas with slots. The antenna is superimposed on a Roger RT/Duroid 6002 with total dimensions of 17 × 12 × 1.52 mm3. Afterward, a MIMO configuration is formed along with a novel decoupling structure comprising a parasitic patch and a Defected Ground Structure (DGS). The parasitic patch is made up of strip lines with a rectangular box in the center, which is filled with circular rings. On the other side, the DGS is made by a combination of etched slots, resulting in separate ground areas behind each MIMO element. The proposed structure not only reduces coupling from -17.25 to -44 dB but also improves gain from 9.25 to 11.9 dBi while improving the bandwidth from 26.5-30.5 GHz to 25.5-30.5 GHz. Moreover, the MIMO antenna offers good performance while offering strong MIMO performance parameters, including ECC, diversity gain (DG), channel capacity loss (CCL), and mean effective gain (MEG). Furthermore, a state-of-the-art comparison is provided that results in the overperforming results of the proposed antenna system as compared to already published work. The antenna prototype is also fabricated and tested to verify software-generated results obtained from the electromagnetic (EM) tool HFSS.

Frequency-Reconfigurable Millimeter-Wave Rectangular Dielectric Resonator Antenna.

This paper introduces an innovative and cost-effective approach for developing a millimeter-wave (mmWave) frequency-reconfigurable dielectric resonator antenna (DRA), which has not been reported before. The antenna integrates two rectangular DRA elements, where each DRA is centrally fed via a slot. A strategically positioned PIN diode is employed to exert control over performance by modulating the ON-OFF states of the diode, thereby simplifying the design process and reducing losses. In the OFF state, the first DRA, RDRA-I, exclusively supports the TE311 resonance mode at 24.3 GHz, offering a 2.66% impedance bandwidth and achieving a maximum broadside gain of 9.2 dBi. Conversely, in the ON state, RDRA-I and RDRA-II concurrently operate in the TE513 resonance mode at 29.3 GHz, providing a 2.7% impedance bandwidth and yielding a high gain of up to 11.8 dBi. Experimental results substantiate that the proposed antenna presents an attractive solution for applications necessitating frequency-reconfigurable and high-performance mmWave antennas in 5G and Beyond 5G (B5G) communication systems.

A New Method for Detecting Dehydration of the Human Body Using Non-Contact Millimeter Wave Radiometry.

Dehydration is a common problem in the aging population. Medical professionals can detect dehydration using either blood or urine tests. This requires experimental tests in the lab as well as urine and blood samples to be obtained from the patients. This paper proposed 100 GHz millimeter wave radiometry for early detection of dehydration. Reflectance measurements were performed on healthy and dehydrated patients of both genders (120 males and 80 females) in the aging population. Based on the cause of dehydration, the patient groups were divided into three categories: (1) patients dehydrated due to less thirst sensation, (2) patients dehydrated due to illnesses (vomiting and diarrhea), and (3) patients dehydrated due to diabetes. Reflectance measurements were performed on eight locations: (1) the palm, (2) the back of the hand, (3) the fingers, (4) the inner wrist, (5) the outer wrist, (6) the volar side of the arm, (7) the dorsal surface of the arm, and (8) the elbow. Skin dehydrated due to vomiting and diarrhea was found to have lower reflectance at all the measurement locations compared with healthy and other types of dehydrated skin. The elbow region showed the highest difference in reflectance between healthy and dehydrated skin. This indicates that radiometric sensitivity is sufficient to detect dehydration in a few seconds. This will reduce the patient's waiting time and the healthcare professional's intervention time as well as allow early treatment of dehydration, thus avoiding admission to hospitals.

Development of a High-Sensitivity Millimeter-Wave Radar Imaging System for Non-Destructive Testing.

There is an urgent need to develop non-destructive testing (NDT) methods for infrastructure facilities and residences, etc., where human lives are at stake, to prevent collapse due to aging or natural disasters such as earthquakes before they occur. In such inspections, it is desirable to develop a remote, non-contact, non-destructive inspection method that can inspect cracks as small as 0.1 mm on the surface of a structure and damage inside and on the surface of the structure that cannot be seen by the human eye with high sensitivity, while ensuring the safety of the engineers inspecting the structure. Based on this perspective, we developed a radar module (absolute gain of the transmitting antenna: 13.5 dB; absolute gain of the receiving antenna: 14.5 dB) with very high directivity and minimal loss in the signal transmission path between the radar chip and the array antenna, using our previously developed technology. A single-input, multiple-output (SIMO) synthetic aperture radar (SAR) imaging system was developed using this module. As a result of various performance evaluations using this system, we were able to demonstrate that this system has a performance that fully satisfies the abovementioned indices. First, the SNR in millimeter-wave (MM-wave) imaging was improved by 5.4 dB compared to the previously constructed imaging system using the IWR1443BOOST EVM, even though the measured distance was 2.66 times longer. As a specific example of the results of measurements on infrastructure facilities, the system successfully observed cracks as small as 0.1 mm in concrete materials hidden under glass fiber-reinforced tape and black acrylic paint. In this case, measurements were also made from a distance of about 3 m to meet the remote observation requirements, but the radar module with its high-directivity and high-gain antenna proved to be more sensitive in detecting crack structures than measurements made from a distance of 780 mm. In order to estimate the penetration length of MM waves into concrete, an experiment was conducted to measure the penetration of MM waves through a thin concrete slab with a thickness of 3.7 mm. As a result, Λexp = 6.0 mm was obtained as the attenuation distance of MM waves in the concrete slab used. In addition, transmission measurement experiments using a composite material consisting of ceramic tiles and fireproof board, which is a component of a house, and experiments using composite plywood, which is used as a general housing construction material in Japan, succeeded in making perspective observations of defects in the internal structure, etc., which are invisible to the human eye.

A Low-Profile Circularly Polarized Millimeter-Wave Broadband Antenna Analyzed with a Link Budget for IoT Applications in an Indoor Scenario.

Broadband antennas with a low-profile generating circular polarization are always in demand for handheld/ portable devices as CP antennas counter multipath and misalignment issues. Therefore, a compact millimeter-wave antenna is proposed in this article. The proposed antenna structure comprises two circular rings and a circular patch at the center. This structure is further embedded with four equilateral triangles at a 90° orientation. The current entering the radiator is divided into left and right circular directions. The equilateral triangles provide the return path for current at the differential phase of ±90°, generating circular polarization. Structural development and analysis were initially performed through the characteristic mode theory. It showed that Modes 1 to 4 generated good impedance matching from 20 to 30 GHz and Modes 1 to 5, from 30 to 40 GHz. It also demonstrated the summation of orthogonal modes leading to circular polarization. The antenna-measured reflection coefficient |S11| > 10 dB was 19 GHz (23-42 GHz), and the axial ratio at -3 dB was 4.2 GHz (36-40.2 GHz). The antenna gain ranged from 4 to 6.2 dBi. The proposed antenna was tested for link margin estimation for IoT indoor conditions with line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. The communication reliability with co- and cross-polarization was also studied under these conditions, and the results proved to be satisfactory.

Vegetation Loss Measurements for Single Alley Trees in Millimeter-Wave Bands.

As fixed wireless access (FWA) is still envisioned as a reasonable way to achieve communications links, foliage attenuation becomes an important wireless channel impairment in the millimeter-wave bandwidth. Foliage is modeled in the radiative transfer equation as a medium of random scatterers. However, other phenomena in the wireless channel may also occur. In this work, vegetation attenuation measurements are presented for a single tree alley for 26-32 GHz. The results show that vegetation loss increases significantly after the second tree in the alley. Measurement-based foliage losses are compared with model-based, and new tuning parameters are proposed for models.

A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna.

Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.

A Compact Linear Microstrip Patch Beamformer Antenna Array for Millimeter-Wave Future Communication.

5/6G is anticipated to address challenges such as low data speed and high latency in current cellular networks, particularly as the number of users overwhelms 4G and LTE capabilities. This paper proposes a microstrip patch antenna array comprising six radiating patches and utilizing a microstrip line feeding technique to facilitate the compact design crucial for 5G implementation. ROGER 3003, chosen for its advanced and environmentally friendly features, serves as the dielectric material, ensuring suitability for 5G and B5G applications. The designed antenna, evaluated at a resonating frequency of 28.8 GHz with a -10 dB impedance bandwidth of 1 GHz, offers a high gain of 9.19 dBi. Its compact array, cost-effectiveness, and broad impedance and radiation coverage position it as a viable candidate for 5G and future communication applications.

An Overview of Millimeter-Wave Radar Modeling Methods for Autonomous Driving Simulation Applications.

Autonomous driving technology is considered the trend of future transportation. Millimeter-wave radar, with its ability for long-distance detection and all-weather operation, is a key sensor for autonomous driving. The development of various technologies in autonomous driving relies on extensive simulation testing, wherein simulating the output of real radar through radar models plays a crucial role. Currently, there are numerous distinctive radar modeling methods. To facilitate the better application and development of radar modeling methods, this study first analyzes the mechanism of radar detection and the interference factors it faces, to clarify the content of modeling and the key factors influencing modeling quality. Then, based on the actual application requirements, key indicators for measuring radar model performance are proposed. Furthermore, a comprehensive introduction is provided to various radar modeling techniques, along with the principles and relevant research progress. The advantages and disadvantages of these modeling methods are evaluated to determine their characteristics. Lastly, considering the development trends of autonomous driving technology, the future direction of radar modeling techniques is analyzed. Through the above content, this paper provides useful references and assistance for the development and application of radar modeling methods.

Identification of Respiratory Pauses during Swallowing by Unconstrained Measuring Using Millimeter Wave Radar.

Breathing temporarily pauses during swallowing, and the occurrence of inspiration before and after these pauses may increase the likelihood of aspiration, a serious health problem in older adults. Therefore, the automatic detection of these pauses without constraints is important. We propose methods for measuring respiratory movements during swallowing using millimeter wave radar to detect these pauses. The experiment involved 20 healthy adult participants. The results showed a correlation of 0.71 with the measurement data obtained from a band-type sensor used as a reference, demonstrating the potential to measure chest movements associated with respiration using a non-contact method. Additionally, temporary respiratory pauses caused by swallowing were confirmed by the measured data. Furthermore, using machine learning, the presence of respiring alone was detected with an accuracy of 88.5%, which is higher than that reported in previous studies. Respiring and temporary respiratory pauses caused by swallowing were also detected, with a macro-averaged F1 score of 66.4%. Although there is room for improvement in temporary pause detection, this study demonstrates the potential for measuring respiratory movements during swallowing using millimeter wave radar and a machine learning method.

Antenna Integration for Millimeter-Wave RF Sensing and Millimeter-Wave Communication Mountable on a Platform.

An array antenna for millimeter-wave communication and an array antenna for millimeter-wave sensing are designed and put together into one structure. Because millimeter-wave signals become weaker fast with the increasing distance and any kind of error in the required functions of the antenna has to be minimized, pointing error from the target direction should be prevented. The device is a millimeter-wave sensing antenna with high directivity to check the straight link between the TX and RX sides of wireless communication. A 24 GHz 8-by-16 array antenna which generates stronger signals for sensing resolves the drawback of a 28 GHz 1-by-4 array antenna that is commonly seen in 5G wireless terminals. The sensing and communication antennas are integrated as a planar structure mountable on platforms, which is investigated with regard to forming wireless links over a distance of several meters with an input power of less than 0 dBm. Additionally, in the event of a reflecting surface disturbing the straight path and worsening the pointing error in RF signal transfer, the dual-capability of the combination is presented on the basis of intuitive electromagnetic experiments.

Tensor-Free Holographic Metasurface Leaky-Wave Multi-Beam Antennas with Tailorable Gain and Polarization.

Recently, the community has seen a rise in interest and development regarding holographic antennas. The planar hologram is made of subwavelength metal patches printed on a grounded dielectric board, constituting flat metasurfaces. When a known reference wave is launched, the hologram produces a pencil beam towards a prescribed direction. Most earlier works on such antennas have considered only a single beam. For the few later ones that studied multiple beams, they were achieved either by having each beam taken care of by a distinct frequency or by partitioning the hologram, thereby depriving each beam of the directivity it could have had it not shared the holographic aperture with other beams. There have been recent studies related to the use of tensor surface impedance concepts for the synthesis of holograms which have attained control over the polarizations and intensities of the beams. However, this approach is complicated, tedious, and time-consuming. In this paper, we present a method for designing a planar holographic leaky-wave multi-beam metasurface antenna, of which each simultaneous beam radiating at the same frequency towards any designated direction has a tailorable amplitude, phase, and polarization, all without hologram partitioning. Most importantly, this antenna is exempted from the need for the cumbersome technique of tensor impedance. Such features of beam configurability are useful in selective multiple-target applications that require differential gain and polarization control among the various beams. Only a single source is needed, which is another benefit. In addition, effective methods to mitigate sidelobes are also proposed here. Designs by simulations according to the method are herein validated with measurements performed on fabricated prototypes.

Intelligent Millimeter-Wave System for Human Activity Monitoring for Telemedicine.

Telemedicine has the potential to improve access and delivery of healthcare to diverse and aging populations. Recent advances in technology allow for remote monitoring of physiological measures such as heart rate, oxygen saturation, blood glucose, and blood pressure. However, the ability to accurately detect falls and monitor physical activity remotely without invading privacy or remembering to wear a costly device remains an ongoing concern. Our proposed system utilizes a millimeter-wave (mmwave) radar sensor (IWR6843ISK-ODS) connected to an NVIDIA Jetson Nano board for continuous monitoring of human activity. We developed a PointNet neural network for real-time human activity monitoring that can provide activity data reports, tracking maps, and fall alerts. Using radar helps to safeguard patients' privacy by abstaining from recording camera images. We evaluated our system for real-time operation and achieved an inference accuracy of 99.5% when recognizing five types of activities: standing, walking, sitting, lying, and falling. Our system would facilitate the ability to detect falls and monitor physical activity in home and institutional settings to improve telemedicine by providing objective data for more timely and targeted interventions. This work demonstrates the potential of artificial intelligence algorithms and mmwave sensors for HAR.

The Implementation of a Gesture Recognition System with a Millimeter Wave and Thermal Imager.

During the COVID-19 pandemic, the number of cases continued to rise. As a result, there was a growing demand for alternative control methods to traditional buttons or touch screens. However, most current gesture recognition technologies rely on machine vision methods. However, this method can lead to suboptimal recognition results, especially in situations where the camera is operating in low-light conditions or encounters complex backgrounds. This study introduces an innovative gesture recognition system for large movements that uses a combination of millimeter wave radar and a thermal imager, where the multi-color conversion algorithm is used to improve palm recognition on the thermal imager together with deep learning approaches to improve its accuracy. While the user performs gestures, the mmWave radar captures point cloud information, which is then analyzed through neural network model inference. It also integrates thermal imaging and palm recognition to effectively track and monitor hand movements on the screen. The results suggest that this combined method significantly improves accuracy, reaching a rate of over 80%.