Crystal size, shape, and conformational changes drive both the disappearance and reappearance of ritonavir polymorphs in the mill.

Organic compounds can crystallize in different forms known as polymorphs. Discovery and control of polymorphism is crucial to the pharmaceutical industry since different polymorphs can have significantly different physical properties which impacts their utilization in drug delivery. Certain polymorphs have been reported to 'disappear' from the physical world, irreversibly converting to new ones. These unwanted polymorph conversions, initially prevented by slow nucleation kinetics, are eventually observed driven by significant gains in thermodynamic stabilities. The most infamous of these cases is that of the HIV drug ritonavir (RVR): Once its reluctant form was unwillingly nucleated for the first time, its desired form could no longer be produced with the same manufacturing process. Here we show that RVR's extraordinary disappearing polymorph as well as its reluctant form can be consistently produced by ball-milling under different environmental conditions. We demonstrate that the significant difference in stability between its polymorphs can be changed and reversed in the mill-a process we show is driven by crystal size as well as crystal shape and conformational effects. We also show that those effects can be controlled through careful design of milling conditions since they dictate the kinetics of crystal breakage, dissolution, and growth processes that eventually lead to steady-state crystal sizes and shapes in the mill. This work highlights the huge potential of mechanochemistry in polymorph discovery of forms initially difficult to nucleate, recovery of disappearing polymorphs, and polymorph control of complex flexible drug compounds such as RVR.

Chemoselectivity Inversion of Responsive Metal-Organic Frameworks by Particle Size Tuning in the Micrometer Regime.

Gated adsorption is one of the unique physical properties of flexible metal-organic frameworks with high application potential in selective adsorption and sensing of molecules. Despite recent studies that have provided some guidelines in understanding and designing structural flexibility for controlling gate opening by chemical modification of the secondary building units, currently, there is no established strategy to design a flexible MOF showing selective gated adsorption for a specific guest molecule. In a present contribution it is demonstrated for the first time, that the selectivity in the gate opening of a particular compound can be tuned, changed, and even reversed using particle size engineering DUT-8(Zn) ([Zn2(2,6-ndc)2(dabco)]n, 2,6-ndc = 2,6-naphthalenedicarboxylate, dabco = 1,4-diazabicyclo-[2.2.2]-octane, DUT = Dresden University of Technology) experiences phase transition from open (op) to closed (cp) pore phase upon removal of solvent from the pores. Microcrystals show selective reopening in the presence of dichloromethane (DCM) over alcohols. Crystal downsizing to micron size unexpectedly reverses the gate opening selectivity, causing DUT-8(Zn) to open its nanosized pores for alcohols but suppressing the responsivity toward DCM.

Effect of particle size on liver MRI R 2 * relaxometry: Monte Carlo simulation and phantom studies.

PURPOSE: To investigate the effect of particle size on liver R 2 * $$ {\mathrm{R}}_2^{\ast } $$ by Monte Carlo simulation and phantom studies at both 1.5 T and 3.0 T. METHODS: Two kinds of particles (i.e., iron sphere and fat droplet) with varying sizes were considered separately in simulation and phantom studies. MRI signals were synthesized and analyzed for predicting R 2 * $$ {\mathrm{R}}_2^{\ast } $$ , based on simulations by incorporating virtual liver model, particle distribution, magnetic field generation, and proton movement into phase accrual. In the phantom study, iron-water and fat-water phantoms were constructed, and each phantom contained 15 separate vials with combinations of five particle concentrations and three particle sizes. R 2 * $$ {\mathrm{R}}_2^{\ast } $$ measurements in the phantom were made at both 1.5 T and 3.0 T. Finally, differences in R 2 * $$ {\mathrm{R}}_2^{\ast } $$ predictions or measurements were evaluated across varying particle sizes. RESULTS: In the simulation study, strong linear and positively correlated relationships were observed between R 2 * $$ {\mathrm{R}}_2^{\ast } $$ predictions and particle concentrations across varying particle sizes and magnetic field strengths ( r ≥ 0.988 $$ r\ge 0.988 $$ ). The relationships were affected by iron sphere size ( p < 0.001 $$ p<0.001 $$ ), where smaller iron sphere size yielded higher predicted R 2 * $$ {\mathrm{R}}_2^{\ast } $$ , whereas fat droplet size had no effect on R 2 * $$ {\mathrm{R}}_2^{\ast } $$ predictions ( p ≥ 0.617 $$ p\ge 0.617 $$ ) for constant total fat concentration. Similarly, the phantom study showed that R 2 * $$ {\mathrm{R}}_2^{\ast } $$ measurements were relatively sensitive to iron sphere size ( p ≤ 0.004 $$ p\le 0.004 $$ ) unlike fat droplet size ( p ≥ 0.223 $$ p\ge 0.223 $$ ). CONCLUSION: Liver R 2 * $$ {\mathrm{R}}_2^{\ast } $$ is affected by iron sphere size, but is relatively unaffected by fat droplet size. These findings may lead to an improved understanding of the underlying mechanisms of R 2 * $$ {\mathrm{R}}_2^{\ast } $$ relaxometry in vivo, and enable improved quantitative MRI phantom design.

Nebulization and In Vitro Upper Airway Deposition of Liposomal Carrier Systems.

Liposomal carrier systems have emerged as a promising technology for pulmonary drug delivery. This study focuses on two selected liposomal systems, namely, dipalmitoylphosphatidylcholine stabilized by phosphatidic acid and cholesterol (DPPC-PA-Chol) and dipalmitoylphosphatidylcholine stabilized by polyethylene glycol and cholesterol (DPPC-PEG-Chol). First, the research investigates the stability of these liposomal systems during the atomization process using different kinds of nebulizers (air-jet, vibrating mesh, and ultrasonic). The study further explores the aerodynamic particle size distribution of the aerosol generated by the nebulizers. The nebulizer that demonstrated optimal stability and particle size was selected for more detailed investigation, including Andersen cascade impactor measurements, an assessment of the influence of flow rate and breathing profiles on aerosol particle size, and an in vitro deposition study on a realistic replica of the upper airways. The most suitable combination of a nebulizer and liposomal system was DPPC-PA-Chol nebulized by a Pari LC Sprint Star in terms of stability and particle size. The influence of the inspiration flow rate on the particle size was not very strong but was not negligible either (decrease of Dv50 by 1.34 µm with the flow rate increase from 8 to 60 L/min). A similar effect was observed for realistic transient inhalation. According to the in vitro deposition measurement, approximately 90% and 70% of the aerosol penetrated downstream of the trachea using the stationary flow rate and the realistic breathing profile, respectively. These data provide an image of the potential applicability of liposomal carrier systems for nebulizer therapy. Regional lung drug deposition is patient-specific; therefore, deposition results might vary for different airway geometries. However, deposition measurement with realistic boundary conditions (airway geometry, breathing profile) brings a more realistic image of the drug delivery by the selected technology. Our results show how much data from cascade impactor testing or estimates from the fine fraction concept differ from those of a more realistic case.

Particle Size, Dose, and Confinement Affect Passive Diffusion Flux through the Membrane Concentration Boundary Layer.

The authors present a steady-state-, particle-size-, and dose-dependent dissolution-permeation model that describes particle dissolution within the concentration boundary layer (CBL) adjacent to a semipermeable surface. It is critical to understand how particle size and dose affect the behavior of dissolving particles in the presence of a CBL adjacent to a semipermeable surface both in vivo and in vitro. Control of particle size is ubiquitous in the pharmaceutical industry; however, traditional pharmaceutical assumptions of particle dissolution typically ignore particle dissolution within the length scale of the CBL. The CBL does not physically prevent particles from traveling to the semipermeable surface (mucus, epithelial barrier, synthetic membrane, etc.), and particle dissolution can occur within the CBL thickness (δC) if the particle is sufficiently small (∼dparticle ≤ δC). The total flux (the time rate transport of molecules across the membrane surface per unit area) was chosen as a surrogate parameter for measuring the additional mass generated by particles dissolving within the donor CBL. Mass transfer experiments aimed to measure the total flux of drug using an ultrathin large-area membrane diffusion cell described by Sinko et al. with a silicone-based membrane ( Mol. Pharmaceutics 2020, 17, (7) 2319-2328, DOI: 10.1021/acs.molpharmaceut.0c00040). Suspensions of ibuprofen, a model weak-acid drug, with three different particle-size distributions with average particle diameters of 6.6, 37.4, and 240 µm at multiple doses corresponding to a range of suspension concentrations with dimensionless dose numbers of 2.94, 14.7, 147, and 588 were used to test the model. Experimentally measured total flux across the semipermeable membrane/CBL region agreed with the predictions from the proposed model, and at a range of relatively low suspension concentrations, dependent on the average particle size, there was a measurable effect on the flux due to the difference in δC that formed at the membrane surface. Additionally, the dose-dependent total flux across the membrane was up to 10% higher than the flux predicted by the standard Higuchi-Hiestand dissolution model where the effects of confinement were ignored as described by Wang et al. ( Mol. Pharmaceutics 2012, 9 (5), 1052-1066, DOI: 10.1021/mp2002818).

Modelling Drug Delivery to the Small Airways: Optimization Using Response Surface Methodology.

AIM: The aim of this in silico study was to investigate the effect of particle size, flow rate, and tidal volume on drug targeting to small airways in patients with mild COPD. METHOD: Design of Experiments (DoE) was used with an in silico whole lung particle deposition model for bolus administration to investigate whether controlling inhalation can improve drug delivery to the small conducting airways. The range of particle aerodynamic diameters studied was 0.4 - 10 µm for flow rates between 100 - 2000 mL/s (i.e., low to very high), and tidal volumes between 40 - 1500 mL. RESULTS: The model accurately predicted the relationship between independent variables and lung deposition, as confirmed by comparison with published experimental data. It was found that large particles (~ 5 µm) require very low flow rate (~ 100 mL/s) and very small tidal volume (~ 110 mL) to target small conducting airways, whereas fine particles (~ 2 µm) achieve drug targeting in the region at a relatively higher flow rate (~ 500 mL/s) and similar tidal volume (~ 110 mL). CONCLUSION: The simulation results indicated that controlling tidal volume and flow rate can achieve targeted delivery to the small airways (i.e., > 50% of emitted dose was predicted to deposit in the small airways), and the optimal parameters depend on the particle size. It is hoped that this finding could provide a means of improving drug targeting to the small conducting airways and improve prognosis in COPD management.

Development and Validation of Matrix of Chemistry, Manufacturing, and Control (MoCMC) System for Intramammary Drug Products (IMM).

PURPOSE: Products formulated for intramammary (IMM) infusion are intended for the delivery of therapeutic moieties directly into the udder through the teat canal to maximize drug exposure at the targeted clinical site, the mammary gland, with little to no systemic drug exposure. Currently, to our knowledge, there has been no in-vitro matrix system available to differentiate between IMM formulations. Our goal is to develop A custom tailored in-vitro "Matrix of Chemistry, Manufacturing and Control" (MoCMC) System to be a promising future tool for identifying inequivalent IMM formulations. MoCMC can detect inter and intra batch variabilities, thereby identifying potential generics versus brand product similarities or differences with a single numeric value and a specific & distinctive fingerprint. METHODS: The FDA-approved IMM formulation, SPECTRAMASTⓇ LC, was selected as the reference product for the MoCMC. Twelve in-house test formulations containing ceftiofur hydrochloride were formulated and characterized. The MoCMC was developed to include six input parameters and three output parameters. The MoCMC system was used to evaluate and compare SPECTRAMASTⓇ LC with its in-house formulations. RESULTS: Based on the MoCMC generated parameters, the distinctive fingerprints of MoCMC for each IMM formulations, and the statistical analyses of MCI and PPI values, in-house formulations, F-01 and F-02 showed consistency while the rest of in-house formulations (F-03-F-12) were significantly different as compared to SPECTRAMASTⓇ LC. CONCLUSION: This research showed that the MoCMC approach can be used as a tool for intra batch variabilities, generics versus brand products comparisons, post-approval formulations changes, manufacturing changes, and formulation variabilities.

Application of PAT Probes in Aluminum Phosphate Adjuvant Manufacturing.

PURPOSE: This study is focused on monitoring process parameters and quality attributes of aluminum phosphate (AlPO4) using multiple in-line probes incorporated into an industrial-scale adjuvant suspension manufacturing unit. METHODS: The manufacturing of aluminum adjuvant suspension was monitored at manufacturing scale using conductivity, turbidity, infrared, and particle sizing and count probes to follow the continuous evolution of particle formation and size distribution, and the reaction kinetics during the synthesis of AlPO4. RESULTS: The data showed that AlPO4 forms large particles at the early stages of mixing, followed by a decrease in size and then stabilization towards the later stages of mixing and pH adjustment. The results provided a complementary view of process events and assisted in optimizing several parameters, e.g., flow rate of reactants AlCl3 and Na3PO4 solutions, mixing rate, pH, and conductivity of AlPO4, as well as adjuvant quality attribute such as particle size, thus streamlining and shortening the process development stage. CONCLUSION: The results of this study showed the usefulness of the in-line probes to automate continuous assessment of AlPO4 batch-to-batch consistency during in-house adjuvant production at the industrial scale.

Larger particle size distribution of environmental RNA compared to environmental DNA: a case study targeting the mitochondrial cytochrome b gene in zebrafish (Danio rerio) using experimental aquariums.

Environmental RNA (eRNA) analysis is conventionally expected to infer physiological information about organisms within their ecosystems, whereas environmental DNA (eDNA) analysis only infers their presence and abundance. Despite the promise of eRNA application, basic research on eRNA characteristics and dynamics is limited. The present study conducted aquarium experiments using zebrafish (Danio rerio) to estimate the particle size distribution (PSD) of eRNA in order to better understand the persistence state of eRNA particles. Rearing water samples were sequentially filtered using different pore-size filters, and the resulting size-fractioned mitochondrial cytochrome b (CytB) eDNA and eRNA data were modeled with the Weibull complementary cumulative distribution function (CCDF) to estimate the parameters characterizing the PSDs. It was revealed that the scale parameter (α) was significantly higher (i.e., the mean particle size was larger) for eRNA than eDNA, while the shape parameter (ß) was not significantly different between them. This result supports the hypothesis that most eRNA particles are likely in a protected, intra-cellular state, which mitigates eRNA degradation in water. Moreover, these findings also imply the heterogeneous dispersion of eRNA relative to eDNA and suggest an efficient method of eRNA collection using a larger pore-size filter. Further studies on the characteristics and dynamics of eRNA particles should be pursued in the future.

Silica Nanoparticle Size Determines the Mechanisms Underlying the Inhibition of Iron Oxide Nanoparticle Uptake by Daphnia magna.

Aquatic environments are complicated systems that contain different types of nanoparticles (NPs). Nevertheless, recent studies of NP toxicity, and especially those that have focused on bioaccumulation have mostly investigated only a single type of NPs. Assessments of the environmental risks of NPs that do not consider co-exposure regimes may lead to inaccurate conclusions and ineffective environmental regulation. Thus, the present study examined the effects of differently sized silica NPs (SiO2 NPs) on the uptake of iron oxide NPs (Fe2O3 NPs) by the zooplankton Daphnia magna. Both SiO2 NPs and Fe2O3 NPs were well dispersed in the experimental medium without significant heteroaggregation. Although all three sizes of SiO2 NPs inhibited the uptake of Fe2O3 NPs, the underlying mechanisms differed. SiO2 NPs smaller than the average mesh size (∼200 nm) of the filtering apparatus of D. magna reduced the accumulation of Fe2O3 NPs through uptake competition, whereas larger SiO2 NPs inhibited the uptake of Fe2O3 NPs mainly by reducing the water filtration rate of the daphnids. Overall, in evaluations of the risks of NPs in the natural environment, the different mechanisms underlying the effects of NPs of different sizes on the uptake of dissimilar NPs should be considered.

Characterizing and Predicting nvPM Size Distributions for Aviation Emission Inventories and Environmental Impact.

Concerns about civil aviation's air quality and environmental impacts have led to recent regulations on nonvolatile particulate matter (nvPM) mass and number emissions. Although these regulations do not mandate measuring particle size distribution (PSD), understanding PSDs is vital for assessing the environmental impacts of aviation nvPM. This study introduces a comprehensive data set detailing PSD characteristics of 42 engines across 19 turbofan types, ranging from unregulated small business jets to regulated large commercial aircraft. Emission tests were independently performed by using the European and Swiss reference nvPM sampling and measurement systems with parallel PSD measurements. The geometric mean diameter (GMD) at the engine exit strongly correlated with the nvPM number-to-mass ratio (N/M) and thrust, varying from 7 to 52 nm. The engine-exit geometric standard deviation ranged from 1.7 to 2.5 (mean of 2.05). The study proposes empirical correlations to predict GMD from N/M data of emissions-certified engines. These predictions are expected to be effective for conventional rich-burn engines and might be extended to novel combustor technologies if additional data become available. The findings support the refinement of emission models and help in assessing the aviation non-CO2 climate and air quality impacts.

Finer Particle Size Distribution and Potential Higher Toxicity of Elemental Carbon and Polycyclic Aromatic Hydrocarbons Emitted by Ships after Fuel Oil Quality Improvement.

Ship emissions are a significant source of air pollution, and the primary policy to control is fuel oil quality improvement. However, the impact of this policy on particle size distribution and composition characteristics remains unclear. Measurements were conducted on nine different vessels (ocean-going vessels, coastal cargo ships, and inland cargo ships) to determine the impact of fuel upgrading (S < 0.1% m/m marine gas oil (MGO) vs S < 0.5% m/m heavy fuel oil (HFO)) on elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs) emitted by ships. (1) Fuel improvement significantly reduced EC and PAH emission, by 31 ± 25 and 45 ± 38%, respectively. However, particle size distributions showed a trend toward finer particles, with the peak size decreasing from DP = 0.38-0.60 µm (HFO) to DP = 0.15-0.25 µm (MGO), and the emission factor of DP < 100 nm increased. (2) Changes in emission characteristics led to an increase in the toxicity of ultrafine particulate matter. (3) Ship types and engine conditions affected the EC and PAH particle size distributions. Inland ships have a more concentrated particle size distribution. Higher loads result in higher emissions. (4) The composition and engine conditions of fuel oils jointly affected pollutant formation mechanisms. MGO and HFO exhibited opposite EC emissions when emitting the same level of PAHs.

Real-Time Monitoring of Particle Size in Emulsion Polymerization: Simultaneous Turbidity and Photon Density Wave Spectroscopy.

Particle size evolution in seeded semibatch emulsion polymerization is monitored by two real-time monitoring techniques: online turbidity spectroscopy (TUS) and inline photon density wave spectroscopy (PDWS). An automatic dilution system that withdraws a sample from the reactor and upon dilution transfers to the measurement cell is used for the online TUS analysis. A PDWS probe is immersed in the reactor and collects inline the scattered light directly from the reacting latex. The particle sizes retrieved from TUS and PDWS are compared to offline dynamic light scattering (DLS) values. The particle size obtained by TUS is close to the intensity-average particle size obtained offline by DLS, while the particle size obtained by PDWS lies closer to the number-average particle size from DLS.

Associations of diet quality and food consumption with serum biomarkers for lipid and amino acid metabolism in Finnish children: the PANIC study.

PURPOSE: To investigate the associations of overall diet quality and dietary factors with serum biomarkers for lipid and amino acid metabolism in a general population of children. METHODS: We studied 194 girls and 209 boys aged 6-8 years participating in the Physical Activity and Nutrition in Children study. Food consumption was assessed by 4-day food records and diet quality was quantified by the Finnish Children Healthy Eating Index (FCHEI). Fasting serum fatty acids, amino acids, apolipoproteins, as well as lipoprotein particle sizes were analyzed with high-throughput nuclear magnetic resonance spectroscopy. Data were analyzed using linear regression adjusted for age, sex, and body fat percentage. RESULTS: FCHEI was directly associated with the ratio of polyunsaturated (PUFA) to saturated fatty acids (SFA) (PUFA/SFA), the ratio of PUFA to monounsaturated fatty acids (MUFA) (PUFA/MUFA), the ratio of PUFA to total fatty acids (FA) (PUFA%), the ratio of omega-3-fatty acids to total FA (omega-3 FA%), and inversely associated with the ratio of MUFA to total FA (MUFA%), alanine, glycine, histidine and very-low density lipoprotein (VLDL) particle size. Consumption of vegetable oils and vegetable-oil-based margarine (≥ 60% fat) was directly associated with PUFA/SFA, PUFA/MUFA, PUFA%, the ratio of omega-6 FA to total FA (omega-6 FA%), and inversely associated with SFA, MUFA, SFA to total FA (SFA%), MUFA%, alanine and VLDL particle size. Consumption of high-fiber grain products directly associated with PUFA/SFA, PUFA/MUFA, omega-3 FA%, omega-6 FA%, PUFA% and inversely associated with SFA and SFA%. Fish consumption directly related to omega-3 FA and omega-3 FA%. Consumption of sugary products was directly associated with histidine and VLDL particle size. Vegetable, fruit, and berry consumption had direct associations with VLDL particle size and the ratio of apolipoprotein B to apolipoprotein A1. Consumption of low fat (< 1%) milk was directly associated with phenylalanine. A higher consumption of high-fat (≥ 1%) milk was associated with lower serum MUFA/SFA and higher SFA%. Sausage consumption was directly related to SFA% and histidine. Red meat consumption was inversely associated with glycine. CONCLUSIONS: Better diet quality, higher in intake of dietary sources of unsaturated fat and fiber, and lower in sugary product intake were associated with more favorable levels of serum biomarkers for lipid and amino acid metabolism independent of adiposity. TRIAL REGISTRATION: ClinicalTrials.gov: NCT01803776, registered March 3, 2013.

Anaerobic membrane bioreactor coupled with polyaluminum chloride for high-strength phenolic wastewater treatment: Robust performance and potential mechanisms.

Anaerobic digestion of phenolic wastewater by anaerobic membrane bioreactor (AnMBR) has revealed increasing attractiveness, but the application of AnMBRs for treating high-strength phenolic wastewater faces challenges related to elevated phenol stress and membrane fouling. In this study, the coupling of AnMBR and polyaluminum chloride (PAC) was developed for efficient treatment of high-strength phenolic wastewater. The system achieved robust removal efficiencies of phenol (99%) and quinoline (98%) at a gradual increase of phenol concentration from 1000 to 5000 mg/L and a constant quinoline concentration of 100 mg/L. The dosing of PAC could effectively control the membrane fouling rate with the transmembrane pressure (TMP) increasing rate as low as 0.17 kPa/d. The robust performances were mainly attributed to the favorable retention of functional microbes through membrane interception, while pulse cross flow buffered against phenol stress and facilitated cake layer removal. Meanwhile, the enriched core functional microbes, such as Syntrophorhabdus, Syntrophus, Mesotoga and Methanolinea, played a crucial role in further reduction of phenol stress. Notably, the significant presence of biomacromolecule degrader, such as Levilinea, contributed to membrane fouling mitigation through extracellular polymer degradation. Moreover, the enlargement of particle size distribution (PSD) by PAC was expected to mitigate membrane fouling. This study provided a promising avenue for sustainable treatment of high-strength phenolic wastewater.

Dispersant-enhanced migration of radiocesium among soil size fractions: A novel strategy for volume reduction of radioactively contaminated soil.

In the aftermath of the Fukushima Daiichi Nuclear Power Plant accident, a pioneering large-scale decontamination project was initiated, aiming to enable the return of evacuees. This project, the first of its kind in human history, involved the transportation of soils collected during decontamination to interim storage facilities. Before recycling or disposal, these soils undergo processes like volume reduction. However, there's a need for innovative methods to reduce volume effectively and treat secondary wastes more efficiently. The current study explores the impact of a dispersant, sodium hexametaphosphate (SHMP), on the behavior of radiocesium (r-Cs: 137Cs) dynamics in different size fractions of radioactively contaminated soils from Fukushima. The solid-phase speciation analysis of Fukushima soils validated that at least 50% of the 137Cs or other minerals are associated with difficult-to-extract soil phases. Nonetheless, the low 137Cs/133Cs ratio in corresponding soil phases implies a slower r-Cs fixation mechanism. The wet-sieving of r-Cs contaminated soil fraction, < 2 mm, with SHMP, resulted in different soil subfractions (2000-212, 212-53, and < 53 µm). Following SHMP treatment, dispersion of > 92% of 137Cs associated with < 212 µm soil size fractions was observed. The migration of 137Cs towards smaller soil size fractions can be attributed to either SHMP-induced cation exchange or the formation of polyvalent complexes involving SHMP and soil minerals. The condensation of 137Cs in < 212 µm, as induced by SHMP, enabled the subsequent reuse of the larger soil fraction (> 212 µm), which was less contaminated. This study provides a new perspective on the effects of dispersants and contributes to a better understanding of the complex interactions among organic carbon, 137Cs, monovalent and polyvalent cations, and soil functional groups concerning the volume reduction of soils contaminated with r-Cs.

The BioCascade-VIVAS system for collection and delivery of virus-laden size-fractionated airborne particles.

The size of virus-laden particles determines whether aerosol or droplet transmission is dominant in the airborne transmission of pathogens. Determining dominant transmission pathways is critical to implementing effective exposure risk mitigation strategies. The aerobiology discipline greatly needs an air sampling system that can collect virus-laden airborne particles, separate them by particle diameter, and deliver them directly onto host cells without inactivating virus or killing cells. We report the use of a testing system that combines a BioAerosol Nebulizing Generator (BANG) to aerosolize Human coronavirus (HCoV)-OC43 (OC43) and an integrated air sampling system comprised of a BioCascade impactor (BC) and Viable Virus Aerosol Sampler (VIVAS), together referred to as BC-VIVAS, to deliver the aerosolized virus directly onto Vero E6 cells. Particles were collected into four stages according to their aerodynamic diameter (Stage 1: >9.43 µm, Stage 2: 3.81-9.43 µm, Stage 3: 1.41-3.81 µm and Stage 4: <1.41 µm). OC43 was detected by reverse-transcription quantitative polymerase chain reaction (RT-qPCR) analyses of samples from all BC-VIVAS stages. The calculated OC43 genome equivalent counts per cm3 of air ranged from 0.34±0.09 to 70.28±12.56, with the highest concentrations in stage 3 (1.41-3.81 µm) and stage 4 (<1.41 µm). Virus-induced cytopathic effects appeared only in cells exposed to particles collected in stages 3 and 4, demonstrating the presence of viable OC43 in particles <3.81 µm. This study demonstrates the dual utility of the BC-VIVAS as particle size-fractionating air sampler and a direct exposure system for aerosolized viruses. Such utility may help minimize conventional post-collection sample processing time required to assess the viability of airborne viruses and increase the understanding about transmission pathways for airborne pathogens.

The effect of size and density on the mean retention time of particles in reindeer (Rangifer tarandus).

Particle passage from the reticulorumen (RR) depends on particle density and size. A classic way of assessing these effects is the use of plastic markers of varying density and size that are recovered in the faeces. Here, we report results of an experiment where four fistulated reindeer (Rangifer tarandus, 96 ± 12 kg) were fed two different diets (browse, voluntary dry matter intake [DMI] 70 ± 10 g/kg0.75/d; or a pelleted diet, DMI 124 ± 52 g/kg0.75/d) and dosed via fistula with 8 different particle types combining densities of 1.03, 1.22 and 1.44 g/ml and sizes of 1, 10 and 20 mm. Generally, particles that passed the digestive tract intact (not ruminated) did so relatively early after marker dosing, and therefore had shorter mean retention times (MRT) than ruminated particles. On the higher intake, the overall mean retention time (MRT) of particles was shorter, but this was not an effect of shorter MRT for either intact or ruminated particles, but due to a higher proportion of intact particles at the higher intake. This supports the concept that ruminants do not adjust chewing behaviour depending on intake, but that a lower proportion of digesta is submitted to rumination due to pressure-driven escape from the forestomach at higher gut fills. Compared to cattle (Bos primigenius taurus), muskoxen (Ovibos moschatus) and moose (Alces alces) that had received the same markers, reindeer had a lower proportion of 1 mm particles that passed intact. Our results support the concept that the critical size threshold for particles leaving the ruminant forestomach is dependent on body size. While the results likely do not represent findings peculiar for reindeer, they indicate fundamental mechanisms operating in the forestomach of ruminants.

Forage sources in total mixed rations early in life influence performance, metabolites, and behavior of dairy calves.

The objective of this study was to evaluate effects of forage inclusion and sources on performance, metabolism, and feeding behavior of dairy calves. Forty-eight Holstein calves were blocked and randomly assigned to 1 of 4 dietary treatments according to sex and BW at 28 d of life to determine the effects of feeding forage sources (ensiled and dry), with different quality on performance, metabolites, and behavior. Treatments consisted of a no-forage coarsely ground starter (CON); or total mixed ration (TMR) containing 7.5% on a dry matter (DM) basis of Tifton hay of either medium quality (MH) or low quality (LH); or 10% on a DM basis of corn silage (CS). During the first 28 d of life, all calves received 3 L of whole milk twice daily, a commercial pelleted starter and no forage, and water ad libitum. After that, the solid diet was changed to the respective dietary treatments. Calves were gradually weaned from 52 to 56 d of age, and followed for 14 d postweaning. Individual solid feed and milk intakes were recorded daily, and BW and metabolic indicators of intermediate metabolism were recorded weekly. Behavior was recorded, and the analysis was conducted on wk 7 (preweaning) and 10 (postweaning). Solid feed intake increased at wk 7 and 8 when MH, LH, and CS were included in TMR; the same results were observed postweaning. The diets did not affect the average daily gain and BW, but the feed efficiency increased with the CON diet. The ß-hydroxybutyrate concentration was greater in calves receiving TMR-containing forage than CON diet. Furthermore, calves supplemented with forage had a greater rumination time. In conclusion, all forage sources included in the TMR showed feed intake and behavior benefits, reinforcing the need for fiber from forage in pre- and postweaning diets.

Effects of particle size on toxicity, bioaccumulation, and translocation of zinc oxide nanoparticles to bok choy (Brassica chinensis L.) in garden soil.

The indiscriminate use of zinc oxide nanoparticles (ZnO NPs) in daily life can lead to their release into soil environment. These ZnO NPs can be taken up by crops and translocated to their edible part, potentially causing risks to the ecosystem and human health. In this study, we conducted pot experiments to determine phytotoxicity, bioaccumulation and translocation depending on the size (10 - 30 nm, 80 - 200 nm and 300 nm diameter) and concentration (0, 100, 500 and 1000 mg Zn/kg) of ZnO NPs and Zn ion (Zn2+) in bok choy, a leafy green vegetable crop. After 14 days of exposure, our results showed that large-sized ZnO NPs (i.e., 300 nm) at the highest concentration exhibited greater phytotoxicity, including obstruction of leaf and root weight (42.5 % and 33.8 %, respectively) and reduction of chlorophyll a and b content (50.2 % and 85.2 %, respectively), as well as changes in the activities of oxidative stress responses compared to those of small-sized ZnO NPs, although their translocation ability was relatively lower than that of smaller ones. The translocation factor (TF) values decreased as the size of ZnO NPs increased, with TF values of 0.68 for 10 - 30 nm, 0.55 for 80 - 200 nm, and 0.27 for 300 nm ZnO NPs, all at the highest exposure concentration. Both the results of micro X-ray fluorescence (µ-XRF) spectrometer and bio-transmission electron microscopy (bio-TEM) showed that the Zn elements were mainly localized at the edges of leaves exposed to small-sized ZnO NPs. However, the Zn elements upon exposure to large-sized ZnO NP were primarily observed in the primary veins of leaves in the µ-XRF data, indicating a limitation in their ability to translocate from roots to leaves. This study not only advances our comprehension of the environmental impact of nanotechnology but also holds considerable implications for the future of sustainable agriculture and food safety.