RESUMEN
Polysialic acid (polySia) is a linear polymer of α2,8-linked sialic acid residues that is of fundamental biological interest due to its pivotal roles in the regulation of the nervous, immune, and reproductive systems in healthy human adults. PolySia is also dysregulated in several chronic diseases, including cancers and mental health disorders. However, the mechanisms underpinning polySia biology in health and disease remain largely unknown. The polySia-specific hydrolase, endoneuraminidase NF (EndoN), and the catalytically inactive polySia lectin EndoNDM, have been extensively used for studying polySia. However, EndoN is heat stable and remains associated with cells after washing. When studying polySia in systems with multiple polysialylated species, the residual EndoN that cannot be removed confounds data interpretation. We developed a strategy for site-specific immobilization of EndoN on streptavidin-coated magnetic beads. We showed that immobilizing EndoN allows for effective removal of the enzyme from samples, while retaining hydrolase activity. We used the same strategy to immobilize the polySia lectin EndoNDM, which enabled the enrichment of polysialylated proteins from complex mixtures such as serum for their identification via mass spectrometry. We used this methodology to identify a novel polysialylated protein, QSOX2, which is secreted from the breast cancer cell line MCF-7. This method of site-specific immobilization can be utilized for other enzymes and lectins to yield insight into glycobiology.
Asunto(s)
Neuraminidasa , Ácidos Siálicos , Adulto , Humanos , Ácidos Siálicos/química , Neuraminidasa/metabolismo , Lectinas , Oxidorreductasas actuantes sobre Donantes de Grupos SulfuroRESUMEN
Antibody arrays play a pivotal role in the detection and quantification of biomolecules, with their effectiveness largely dependent on efficient protein immobilization. Traditional methods often use heterobifunctional cross-linking reagents for attaching functional residues in proteins to corresponding chemical groups on the substrate surface. However, this method does not control the antibody's anchoring point and orientation, potentially leading to reduced binding efficiency and overall performance. Another method using anti-antibodies as intermediate molecules to control the orientation can be used but it demonstrates lower efficiency. Here, we demonstrate a site-specific protein immobilization strategy utilizing OaAEP1 (asparaginyl endopeptidase) for building a nanobody array. Moreover, we used a nanobody-targeting enhanced green fluorescent protein (eGFP) as the model system to validate the protein immobilization method for building a nanobody array. Finally, by rapidly enriching eGFP, this method further highlights its potential for rapid diagnostic applications. This approach, characterized by its simplicity, high efficiency, and specificity, offers an advancement in the development of surface-modified protein arrays. It promises to enhance the sensitivity and accuracy of biomolecule detection, paving the way for broader applications in various research and diagnostic fields.
Asunto(s)
Anticuerpos , Reactivos de Enlaces CruzadosRESUMEN
The development of methods to engineer and immobilize amine transaminases (ATAs) to improve their functionality and operational stability is gaining momentum. The quest for robust, fast, and easy-to-use methods to screen the activity of large collections of transaminases, is essential. This work presents a novel and multiplex fluorescence-based kinetic assay to assess ATA activity using 4-dimethylamino-1-naphthaldehyde as an amine acceptor. The developed assay allowed us to screen a battery of amine donors using free and immobilized ATAs from different microbial sources as biocatalysts. As a result, using chromatographic methods, 4-hydroxybenzylamine was identified as the best amine donor for the amination of 5-(hydroxymethyl)furfural. Finally, we adapted this method to determine the apparent Michaelis-Menten parameters of a model immobilized ATA at the microscopic (single-particle) level. Our studies promote the use of this multiplex, multidimensional assay to screen ATAs for further improvement.
Asunto(s)
Aminas , Enzimas Inmovilizadas , Aminas/química , Biocatálisis , Aminación , Enzimas Inmovilizadas/metabolismo , Transaminasas/metabolismoRESUMEN
Carbon-based nanomaterials have many applications in biomedicine due to their unique mechanical, chemical, and biological properties. Among them, graphene has received special attention due to its very high specific surface area, high flexibility, and chemical stability. In this study, graphene oxide was first functionalized with amine groups (GO-NH2) and then Fe3O4 nanoparticles were deposited on it using the hydrothermal method. In addition, polyethylene glycol (PEG) was attached to the magnetic graphene nanoparticles to increase their stability and solubility. Finally, PEGylated magnetic graphene nanocomposites were functionalized with nickel-nitrilotriacetic acid (NTA-Ni+2) to bind to the poly-histidine tag in recombinant proteins. The resulting nanocomposites (MG-PEG-NTA-Ni+2) were then used for magnetic immobilization and purification of recombinant ß-NGF as a protein with his-tag sequence. Binding and purification were confirmed by FTIR and SDS-PAGE techniques, respectively. Importantly, differentiation of the PC12 cell line into neurons demonstrated that the purified ß-NGF was fully functional. Our results suggest that MG-PEG-NTA-Ni+2 nanocomposites may be a suitable alternative to commercial resins for rapid and specific protein immobilization and purification.
Asunto(s)
Grafito , Nanocompuestos , Grafito/química , Histidina/química , Proteínas Recombinantes , Polietilenglicoles , Nanocompuestos/química , Fenómenos MagnéticosRESUMEN
Membrane proteins are difficult to be extracted and to be coated on the substrate of the immunoassay reaction chamber because of their hydrophobicity. Traditional method to prepare membrane protein sample requires many steps of protein extraction and purification that may lead to protein structure deformation and protein dysfunction. This work proposes a simple technique to prepare and immobilize the membrane protein suspended in an unprocessed crude cell lysate sample. Membrane fractions in crude cell lysate were incorporated with the large unilamellar vesicle (LUV) that was mainly composed of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) before coating in the polystyrene plate by passive adsorption technique. Immunofluorescence staining and the Enzyme-Linked Immunosorbent Assay (ELISA) examination of a strictly conformation-dependent integral membrane protein, Myelin Oligodendrocyte Glycoprotein (MOG), demonstrate that LUV incorporated cell lysate sample obviously promotes MOG protein immobilization in the microplate well. With LUV incorporation, the dose-response curve of the MOG transfected cell lysate coating plate can be 2-9 times differentiated from that of the untransfected cell lysate coating plate. The LUV incorporated MOG transfected cell lysate can be efficiently coated in the microplate without carbonate/bicarbonate coating buffer assistance.
Asunto(s)
Proteínas de la Membrana , Inmunoensayo/métodos , Ensayo de Inmunoadsorción Enzimática/métodosRESUMEN
This work demonstrates the use of a modified mica to concentrate proteins, which is required for proteomic profiling of blood plasma by mass spectrometry (MS). The surface of mica substrates, which are routinely used in atomic force microscopy (AFM), was modified with a photocrosslinker to allow "irreversible" binding of proteins via covalent bond formation. This modified substrate was called the AFM chip. This study aimed to determine the role of the surface and crosslinker in the efficient concentration of various types of proteins in plasma over a wide concentration range. The substrate surface was modified with a 4-benzoylbenzoic acid N-succinimidyl ester (SuccBB) photocrosslinker, activated by UV irradiation. AFM chips were incubated with plasma samples from a healthy volunteer at various dilution ratios (102X, 104X, and 106X). Control experiments were performed without UV irradiation to evaluate the contribution of physical protein adsorption to the concentration efficiency. AFM imaging confirmed the presence of protein layers on the chip surface after incubation with the samples. MS analysis of different samples indicated that the proteomic profile of the AFM-visualized layers contained common and unique proteins. In the working series of experiments, 228 proteins were identified on the chip surface for all samples, and 21 proteins were not identified in the control series. In the control series, a total of 220 proteins were identified on the chip surface, seven of which were not found in the working series. In plasma samples at various dilution ratios, a total of 146 proteins were identified without the concentration step, while 17 proteins were not detected in the series using AFM chips. The introduction of a concentration step using AFM chips allowed us to identify more proteins than in plasma samples without this step. We found that AFM chips with a modified surface facilitate the efficient concentration of proteins owing to the adsorption factor and the formation of covalent bonds between the proteins and the chip surface. The results of our study can be applied in the development of highly sensitive analytical systems for determining the complete composition of the plasma proteome.
Asunto(s)
Proteínas Sanguíneas , Proteómica , Humanos , Silicatos de Aluminio , Espectrometría de MasasRESUMEN
Mass spectrometry (MS) is one of the main techniques for protein identification. Herein, MS has been employed for the identification of bovine serum albumin (BSA), which was covalently immobilized on the surface of a mica chip intended for investigation by atomic force microscopy (AFM). For the immobilization, two different types of crosslinkers have been used: 4-benzoylbenzoic acid N-succinimidyl ester (SuccBB) and dithiobis(succinimidyl propionate) (DSP). According to the data obtained by using an AFM-based molecular detector, the SuccBB crosslinker was more efficient in BSA immobilization than the DSP. The type of crosslinker used for protein capturing has been found to affect the results of MS identification. The results obtained herein can be applied in the development of novel systems intended for the highly sensitive analysis of proteins with molecular detectors.
Asunto(s)
Albúmina Sérica Bovina , Microscopía de Fuerza Atómica/métodos , Albúmina Sérica Bovina/química , Espectrometría de Masas/métodosRESUMEN
The immobilization of proteins on nanoparticles has received much attention in recent years. Among different approaches, enzymatic protein immobilization shows unique advantages because of its site-specific connection. OaAEP1 is a recently engineered peptide ligase which can specifically recognize an N-terminal GL residue (NH2-Gly-Leu) and a C-terminal NGL amino acid residue (Asn-Gly-Leu-COOH) and ligates them efficiently. Herein, we report OaAEP1-mediated protein immobilization on synthetic magnetic nanoparticles. Our work showed that OaAEP1 could mediate C-terminal site-specific protein immobilization on the amino-functionalized Fe3O4 nanoparticles. Our work demonstrates a new method for site-specific protein immobilization on nanoparticles.
Asunto(s)
Enzimas Inmovilizadas , Enzimas Inmovilizadas/químicaRESUMEN
Proteins immobilized on biosilica which have superior reactivity and specificity and are innocuous to natural environments could be useful biological materials in industrial processes. One recently developed technique, living diatom silica immobilization (LiDSI), has made it possible to immobilize proteins, including multimeric and redox enzymes, via a cellular excretion system onto the silica frustule of the marine diatom Thalassiosira pseudonana. However, the number of application examples so far is limited, and the type of proteins appropriate for the technique is still enigmatic. Here, we applied LiDSI to six industrially relevant polypeptides, including protamine, metallothionein, phosphotriesterase, choline oxidase, laccase, and polyamine synthase. Protamine and metallothionein were successfully immobilized on the frustule as protein fusions with green fluorescent protein (GFP) at the N terminus, indicating that LiDSI can be used for polypeptides which are rich in arginine and cysteine. In contrast, we obtained mutants for the latter four enzymes in forms without green fluorescent protein. Immobilized phosphotriesterase, choline oxidase, and laccase showed enzyme activities even after the purification of frustule in the presence of 1% (wt/vol) octylphenoxy poly(ethyleneoxy)ethanol. An immobilized branched-chain polyamine synthase changed the intracellular polyamine composition and silica nanomorphology. These results illustrate the possibility of LiDSI for industrial applications. IMPORTANCE Proteins immobilized on biosilica which have superior reactivity and specificity and are innocuous to natural environments could be useful biological materials in industrial processes. Living diatom silica immobilization (LiDSI) is a recently developed technique for in vivo protein immobilization on the diatom frustule. We aimed to explore the possibility of using LiDSI for industrial applications by successfully immobilizing six polypeptides: (i) protamine (Oncorhynchus keta), a stable antibacterial agent; (ii) metallothionein (Saccharomyces cerevisiae), a metal adsorption molecule useful for bioremediation; (iii) phosphotriesterase (Sulfolobus solfataricus), a scavenger for toxic organic phosphates; (iv) choline oxidase (Arthrobacter globiformis), an enhancer for photosynthetic activity and yield of plants; (v) laccase (Bacillus subtilis), a phenol oxidase utilized for delignification of lignocellulosic materials; and (vi) branched-chain polyamine synthase (Thermococcus kodakarensis), which produces branched-chain polyamines important for DNA and RNA stabilization at high temperatures. This study provides new insights into the field of applied biological materials.
Asunto(s)
Diatomeas , Hidrolasas de Triéster Fosfórico , Diatomeas/metabolismo , Proteínas Fluorescentes Verdes/genética , Lacasa/genética , Lacasa/metabolismo , Dióxido de Silicio/química , Dióxido de Silicio/metabolismo , Péptidos/metabolismo , Poliaminas/metabolismo , Hidrolasas de Triéster Fosfórico/metabolismo , Metalotioneína/metabolismo , Protaminas/metabolismoRESUMEN
This work demonstrates the ability of the Ion-Sensitive Field-Effect Transistor (ISFET)-based immunosensor to detect antibodies against the human leukocyte antigen (HLA) and the major histocompatibility complex class-I-related chain A (MICA). The sensing membrane of the ISFET devices was modified and functionalized using an APTES-GA strategy. Surface properties, including wettability, surface thickness, and surface topology, were assessed in each module of the modification process. The optimal concentrations of HLA and MICA proteins for the immobilization were 10 and 50 µg/mL. The dose-response curve showed a detection range of 1.98-40 µg/mL for anti-HLA and 5.17-40 µg/mL for anti-MICA. The analytical precision (%CV) was found to be 10.69% and 8.92% for anti-HLA and -MICA, respectively. Moreover, the electrical signal obtained from the irrelevant antibody was considerably different from that of the specific antibodies, indicating the specific binding of the relevant antibodies without noise interference. The sensitivity and specificity in the experimental setting were established for both antibodies (anti-HLA: sensitivity = 80.00%, specificity = 86.36%; anti-MICA: sensitivity = 86.67%, specificity = 88.89%). Our data reveal the potential of applying the ISFET-based immunosensor to the detection of relevant anti-HLA and -MICA antibodies, especially in the field of kidney transplantation.
Asunto(s)
Técnicas Biosensibles , Trasplante de Riñón , Anticuerpos , Antígenos HLA , Antígenos de Histocompatibilidad Clase I , Antígenos de Histocompatibilidad Clase II , Humanos , Inmunoensayo , IonesRESUMEN
This work aims at understanding the attachment mechanisms and stability of proteins on a chromatography medium to develop more efficient functionalization methodologies, which can be exploited in affinity chromatography. In particular, the study was focused on the understanding of the attachment mechanisms of bovine serum albumin (BSA), used as a ligand model, and protein G on novel amine-modified alumina monoliths as a stationary phase. Protein G was used to develop a column for antibody purification. The results showed that, at lower protein concentrations (i.e., 0.5 to 1.0 mg·mL-1), protein attachment follows a 1st-order kinetics compatible with the presence of covalent binding between the monolith and the protein. At higher protein concentrations (i.e., up to 10 mg·mL-1), the data preferably fit a 2nd-order kinetics. Such a change reflects a different mechanism in the protein attachment which, at higher concentrations, seems to be governed by physical adsorption resulting in a multilayered protein formation, due to the presence of ligand aggregates. The threshold condition for the prevalence of physical adsorption of BSA was found at a concentration higher than 1.0 mg·mL-1. Based on this result, protein concentrations of 0.7 and 1.0 mg·mL-1 were used for the functionalization of monoliths with protein G, allowing a maximum attachment of 1.43 mg of protein G/g of monolith. This column was then used for IgG binding-elution experiments, which resulted in an antibody attachment of 73.5% and, subsequently, elution of 86%, in acidic conditions. This proved the potential of the amine-functionalized monoliths for application in affinity chromatography.
Asunto(s)
Anticuerpos , Albúmina Sérica Bovina , Adsorción , Aminas , Cromatografía de Afinidad/métodos , LigandosRESUMEN
Proteins immobilized in metal-organic frameworks (MOFs) often show extraordinary stability. However, most efforts to immobilize proteins in MOFs have only been exploratory. Herein, we present the first systematic study on the thermodynamics of protein immobilization in MOFs. Using insulin as a probe, we leveraged isothermal titration calorimetry (ITC) to investigate how topology, pore size, and hydrophobicity of MOFs influence immobilization. ITC data obtained from the encapsulation of insulin in a series of Zr-MOFs reveals that MOFs provide proteins with a hydrophobic stabilizing microenvironment, making the encapsulation entropically driven. In particular, the pyrene-based NU-1000 tightly encapsulates insulin in its ideally sized mesopores and stabilizes insulin through π-π stacking interactions, resulting in the most enthalpically favored encapsulation process among this series. This study reveals critical insights into the structure-property relationships of protein immobilization.
Asunto(s)
Insulinas , Estructuras Metalorgánicas , Calorimetría/métodos , Estructuras Metalorgánicas/química , Proteínas , TermodinámicaRESUMEN
Efficient production hosts are a key requirement for bringing biopharmaceutical and biotechnological innovations to the market. In this work, a truly universal high-throughput platform for optimization of microbial protein production is described. Using droplet microfluidics, large genetic libraries of strains are encapsulated into biocompatible gel beads that are engineered to selectively retain any protein of interest. Bead-retained products are then fluorescently labeled and strains with superior production titers are isolated using flow cytometry. The broad applicability of the platform is demonstrated by successfully culturing several industrially relevant bacterial and yeast strains and detecting peptides or proteins of interest that are secreted or released from the cell via autolysis. Lastly, the platform is applied to optimize cutinase secretion in Komagataella phaffii (Pichia pastoris) and a strain with 5.7-fold improvement is isolated. The platform permits the analysis of >106 genotypes per day and is readily applicable to any protein that can be equipped with a His6 -tag. It is envisioned that the platform will be useful for large screening campaigns that aim to identify improved hosts for large-scale production of biotechnologically relevant proteins, thereby accelerating the costly and time-consuming process of strain engineering.
Asunto(s)
Microfluídica , Pichia , Proteínas Recombinantes/genética , SaccharomycetalesRESUMEN
Site-directed protein immobilization allows the homogeneous orientation of proteins with high retention of activity, which is advantageous for many applications. Here, we report a facile, specific, and efficient strategy based on the SpyTag-SpyCatcher chemistry. Two SpyTag-fused model proteins, that is, the monomeric red fluorescent protein (RFP) and the oligomeric glutaryl-7-aminocephalosporanic acid acylase, were easily immobilized onto a SpyCatcher-modified resin directly from cell lysates, with activity recoveries in the range of 85-91%. This strategy was further adapted to protein purification, which proceeded through the selective capture of the SpyCatcher-fused target proteins by a SpyTag-modified resin, with the aid of an intein to generate authentic N-termini. For two model proteins, that is, RFP and a variable domain of a heavy chain antibody, the yields were â¼3-7 mg/L culture with >90% purities. This approach could provide a versatile tool for producing high-performance immobilized protein devices and proteins for industrial and therapeutic uses.
Asunto(s)
Amidohidrolasas/metabolismo , Biotecnología/métodos , Enzimas Inmovilizadas/metabolismo , Cadenas Pesadas de Inmunoglobulina/aislamiento & purificación , Proteínas Luminiscentes/metabolismo , Ingeniería de Proteínas/métodos , Proteínas Recombinantes de Fusión/metabolismo , Amidohidrolasas/genética , Enzimas Inmovilizadas/química , Humanos , Cadenas Pesadas de Inmunoglobulina/metabolismo , Proteínas Luminiscentes/genética , Proteínas Recombinantes de Fusión/genética , Proteína Fluorescente RojaRESUMEN
Localized surface plasmon resonance (LSPR) detection offers highly sensitive label-free detection of biomolecular interactions. Simple and robust surface architectures compatible with real-time detection in a flow-through system are required for broad application in quantitative interaction analysis. Here, we established self-assembly of a functionalized gold nanoparticle (AuNP) monolayer on a glass substrate for stable, yet reversible immobilization of Histidine-tagged proteins. To this end, one-step coating of glass substrates with poly-L-lysine graft poly(ethylene glycol) functionalized with ortho-pyridyl disulfide (PLL-PEG-OPSS) was employed as a reactive, yet biocompatible monolayer to self-assemble AuNP into a LSPR active monolayer. Site-specific, reversible immobilization of His-tagged proteins was accomplished by coating the AuNP monolayer with tris-nitrilotriacetic acid (trisNTA) PEG disulfide. LSPR spectroscopy detection of protein binding on these biocompatible functionalized AuNP monolayers confirms high stability under various harsh analytical conditions. These features were successfully employed to demonstrate unbiased kinetic analysis of cytokine-receptor interactions. Graphical abstract.
Asunto(s)
Oro/química , Nanopartículas del Metal/química , Mapeo de Interacción de Proteínas/métodos , Resonancia por Plasmón de Superficie/métodos , Animales , Humanos , Proteínas Inmovilizadas/metabolismo , Interferón-alfa/metabolismo , Modelos Moleculares , Unión Proteica , Receptor de Interferón alfa y beta/metabolismo , Refractometría/métodosRESUMEN
The oxidation of paper by periodate was investigated and systematically characterized by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy, X-ray diffraction, goniometry, and dynamic mechanical analysis. For the first time, in situ FTIR microscopy analysis was performed, yielding chemical images of carbonyl groups on the cellulose fibers. The enhancement of protein immobilization on oxidized paper was quantified by a colorimetric assay with Ponceau dye, demonstrating that 0.5-h oxidation suffices to functionalize the paper-based devices. The oxidized paper was applied as a sensor for protein quantification in urine, a test able to detect levels of proteinuria and even microalbuminuria. The quantification was based on the capture of proteins through covalent bonds formed with the carbonyl groups on the oxidized paper followed by the staining of the region with Ponceau dye. There is a linear dependency between human serum albumin (HSA) concentration and the length of the stained blot from 0.1 to 3 mg mL-1. This method correlated linearly with a reference method showing a higher sensitivity (0.866 cm mL mg-1) than the latter. The limit of quantification was 0.1 mg mL-1, three times lower than that of the commercial strip. Graphical abstract Paper oxidation with periodate and extensive characterization, including microspectroscopy. The conversion of cellulose hydroxyl groups to aldehyde enhances covalent immobilization of protein on paper for application as analytical device. The oxidized paper determined protein in urine, suitable for proteinuria diagnosis.
Asunto(s)
Técnicas Biosensibles/métodos , Celulosa/química , Proteínas Inmovilizadas/química , Papel , Animales , Técnicas Biosensibles/instrumentación , Bovinos , Colorimetría/métodos , Colorantes/química , Humanos , Oxidación-Reducción , Ácido Peryódico/química , Prueba de Estudio Conceptual , Albúmina Sérica Bovina/química , Albúmina Sérica Humana/orinaRESUMEN
Efficient and reliable methods for the generation of bioactive papers are of growing interest in relation to point-of-care testing devices that do not require extensive analytical equipment. Herein, we report the immobilization of functional proteins on paper fibers using a modular chemoenzymatic approach. The synthetic strategy relies on a combination of highly efficient spatially controllable photo-triggered cycloaddition followed by site-specific sortaseâ A-catalyzed transamidation. This site-directed and regiospecific method has allowed unidirectional and covalent immobilization of several proteins displaying different functional properties, with ramifications for application in paper-based diagnostics.
Asunto(s)
Aminoaciltransferasas/metabolismo , Proteínas Bacterianas/metabolismo , Cisteína Endopeptidasas/metabolismo , Luz , Papel , Amidas/química , Aminoaciltransferasas/química , Proteínas Bacterianas/química , Biocatálisis , Reacción de Cicloadición , Cisteína Endopeptidasas/química , Colorantes Fluorescentes/química , Proteínas Inmovilizadas/química , Proteínas Inmovilizadas/metabolismo , Microscopía Confocal , Péptidos/análisis , Péptidos/química , Sistemas de Atención de Punto , EstereoisomerismoRESUMEN
The immobilization of fluorescent proteins is a key technology enabling to fabricate a new generation of photoactive materials with potential technological applications. Herein we have exploited superfolder green (sGFP) and red (RFP) fluorescent proteins expressed with different polypeptide tags. We fused these fluorescent proteins to His-tags to immobilize them on graphene 3D hydrogels, and Cys-tags to immobilize them on porous microparticles activated with either epoxy or disulfide groups and with Lys-tags to immobilize them on upconverting nanoparticles functionalized with carboxylic groups. Genetically programming sGFP and RFP with Cys-tag and His-tag, respectively, allowed tuning the protein spatial organization either across the porous structure of two microbeads with different functional groups (agarose-based materials activated with metal chelates and epoxy-methacrylate materials) or across the surface of a single microbead functionalized with both metal-chelates and disulfide groups. By using different polypeptide tags, we can control the attachment chemistry but also the localization of the fluorescent proteins across the material surfaces. The resulting photoactive material formed by His-RFP immobilized on graphene hydrogels has been tested as pH indicator to measure pH changes in the alkaline region, although the immobilized fluorescent protein exhibited a narrower dynamic range to measure pH than the soluble fluorescent protein. Likewise, the immobilization of Lys-sGFP on alginate-coated upconverting nanoparticles enabled the infrared excitation of the fluorescent protein to be used as a green light emitter. These novel photoactive biomaterials open new avenues for innovative technological developments towards the fabrication of biosensors and photonic devices.
Asunto(s)
Grafito/química , Proteínas Fluorescentes Verdes/química , Hidrogeles/química , Proteínas Inmovilizadas/química , Proteínas Luminiscentes/química , Proteínas Recombinantes de Fusión/química , Alginatos/química , Técnicas Biosensibles , Expresión Génica , Proteínas Fluorescentes Verdes/genética , Proteínas Fluorescentes Verdes/metabolismo , Histidina/química , Histidina/genética , Histidina/metabolismo , Concentración de Iones de Hidrógeno , Proteínas Inmovilizadas/genética , Proteínas Inmovilizadas/metabolismo , Luz , Proteínas Luminiscentes/genética , Proteínas Luminiscentes/metabolismo , Metacrilatos/química , Nanopartículas/química , Oligopéptidos/química , Oligopéptidos/genética , Oligopéptidos/metabolismo , Procesos Fotoquímicos , Proteínas Recombinantes de Fusión/genética , Proteínas Recombinantes de Fusión/metabolismo , Sefarosa/química , Proteína Fluorescente RojaRESUMEN
Human serum albumin (HSA) is one of the most frequently immobilized proteins on the surface of carriers, including magnetic nanoparticles. This is because the drug-HSA interaction study is one of the basic pharmacokinetic parameters determined for drugs. In spite of many works describing the immobilization of HSA and the binding of active substances, research describing the influence of the used support on the effectiveness of immobilization is missing. There are also no reports about the effect of the support drying method on the effectiveness of protein immobilization. This paper examines the effect of both the method of functionalizing the polymer coating covering magnetic nanoparticles (MNPs), and the drying methods for the immobilization of HSA. Albumin was immobilized on three types of aminated chitosan-coated nanoparticles with a different content of amino groups long distanced from the surface Fe3O4-CS-Et(NH2)1-3. The obtained results showed that both the synthesis method and the method of drying nanoparticles have a large impact on the effectiveness of immobilization. Due to the fact that the results obtained for Fe3O4-CS-Et(NH2)2 significantly differ from those obtained for the others, the influence of the geometry of the shell structure on the ability to bind HSA was also explained by molecular dynamics.
Asunto(s)
Quitosano/química , Materiales Biocompatibles Revestidos , Proteínas Inmovilizadas , Nanopartículas de Magnetita , Albúmina Sérica Humana , Adsorción , Aminación , Humanos , Proteínas Inmovilizadas/química , Nanopartículas de Magnetita/química , Nanopartículas de Magnetita/ultraestructura , Modelos Moleculares , Modelos Teóricos , Conformación Molecular , Polímeros/química , Albúmina Sérica Humana/química , Solventes , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Polyhydroxyalkanoates (PHAs) are biodegradable polyesters that accumulate in the cytoplasm of certain bacteria. One promising biotechnological application utilizes these biopolymers as supports for protein immobilization. Here, the PHA-binding domain of the Pseudomonas putida KT2440 PhaF phasin (BioF polypeptide) was investigated as an affinity tag for the in vitro functionalization of poly-3-hydroxybutyrate (PHB) particles with recombinant proteins, namely, full-length PhaF and two fusion proteins tagged to BioF (BioF-C-LytA and BioF-ß-galactosidase, containing the choline-binding module C-LytA and the ß-galactosidase enzyme, respectively). The protein-biopolyester interaction was strong and stable at a wide range of pHs and temperatures, and the bound protein was highly protected from self-degradation, while the binding strength could be modulated by coating with amphiphilic compounds. Finally, BioF-ß-galactosidase displayed very stable enzymatic activity after several continuous activity-plus-washing cycles when immobilized in a minibioreactor. Our results demonstrate the potentialities of PHA and the BioF tag for the construction of novel bioactive materials.IMPORTANCE Our results confirm the biotechnological potential of the BioF affinity tag as a versatile tool for functionalizing PHA supports with recombinant proteins, leading to novel bioactive materials. The wide substrate range of the BioF tag presumably enables protein immobilization in vitro of virtually all natural PHAs as well as blends, copolymers, or artificial chemically modified derivatives with novel physicochemical properties. Moreover, the strength of protein adsorption may be easily modulated by varying the coating of the support, providing new perspectives for the engineering of bioactive materials that require a tight control of protein loading.