Monolayer Graphene Terahertz Detector Integrated with Artificial Microstructure.

Graphene, known for its high carrier mobility and broad spectral response range, has proven to be a promising material in photodetection applications. However, its high dark current has limited its application as a high-sensitivity photodetector at room temperature, particularly for the detection of low-energy photons. Our research proposes a new approach for overcoming this challenge by designing lattice antennas with an asymmetric structure for use in combination with high-quality monolayers of graphene. This configuration is capable of sensitive detection of low-energy photons. The results show that the graphene terahertz detector-based microstructure antenna has a responsivity of 29 V·W-1 at 0.12 THz, a fast response time of 7 µs, and a noise equivalent power of less than 8.5 pW/Hz1/2. These results provide a new strategy for the development of graphene array-based room-temperature terahertz photodetectors.

Sensitive Room-Temperature Graphene Photothermoelectric Terahertz Detector Based on Asymmetric Antenna Coupling Structure.

A highly sensitive room-temperature graphene photothermoelectric terahertz detector, with an efficient optical coupling structure of asymmetric logarithmic antenna, was fabricated by planar micro-nano processing technology and two-dimensional material transfer techniques. The designed logarithmic antenna acts as an optical coupling structure to effectively localize the incident terahertz waves at the source end, thus forming a temperature gradient in the device channel and inducing the thermoelectric terahertz response. At zero bias, the device has a high photoresponsivity of 1.54 A/W, a noise equivalent power of 19.8 pW/Hz1/2, and a response time of 900 ns at 105 GHz. Through qualitative analysis of the response mechanism of graphene PTE devices, we find that the electrode-induced doping of graphene channel near the metal-graphene contacts play a key role in the terahertz PTE response. This work provides an effective way to realize high sensitivity terahertz detectors at room temperature.

High-Responsivity, Low-Leakage Current, Ultra-Fast Terahertz Detectors Based on a GaN High-Electron-Mobility Transistor with Integrated Bowtie Antennas.

In this study, we fabricated three kinds of terahertz detectors with different leakage currents to analyze the plateau-like effect. The results indicate that the platform becomes increasingly apparent with the decrease in the leakage current. The fabricated device with the lowest leakage current shows a responsivity of 4.9 kV/W and noise equivalent power (NEP) of 72 pW/Hz. Further, it can be used for broadband detection between 215 GHz and 232 GHz with a voltage responsivity of more than 3.4 kV/W, and the response time can be up to 8 ns. Overall, the proposed device exhibits high sensitivity, large modulation frequency, and fast response, which indicates its excellent potential for detection and imaging applications in the THz range, including the detection of the 220 GHz atmospheric window.

Recent Progress in the Development of Graphene Detector for Terahertz Detection.

Terahertz waves are expected to be used in next-generation communications, detection, and other fields due to their unique characteristics. As a basic part of the terahertz application system, the terahertz detector plays a key role in terahertz technology. Due to the two-dimensional structure, graphene has unique characteristics features, such as exceptionally high electron mobility, zero band-gap, and frequency-independent spectral absorption, particularly in the terahertz region, making it a suitable material for terahertz detectors. In this review, the recent progress of graphene terahertz detectors related to photovoltaic effect (PV), photothermoelectric effect (PTE), bolometric effect, and plasma wave resonance are introduced and discussed.

Quasi-static Analysis Based on an Equivalent Circuit Model for a CMOS Terahertz Plasmon Detector in the Subthreshold Region.

An analytic method for a complementary metal-oxide-semiconductor (CMOS) terahertz plasmon detector operating in the subthreshold region is presented using the equivalent circuit model. With respect to design optimization of the detector, the signal transmission from the antenna port to the output of the detector is described by using the proposed circuit model, which does not include a complicated physical operating principle and mathematical expressions. Characteristics from the antenna port to the input gate node of the detector are analyzed through the superposition method by using the characteristic impedance of transmission lines. The superposition method shows that the effect of interconnection lines at the input is simplified with the optimum bias point. The characteristics of the plasmon detection are expressed by using small-signal analysis of the single transistor at the sub-threshold operation. The results of the small-signal analysis show that the unity gain preamplifier located between the detector core and the main amplifier can improve the detection performances such as the voltage responsivity and the noise equivalent power. The measurement results using the fabricated CMOS plasmon detector at 200 GHz suggest that the unity gain preamplifier improves the detector performances, which are the same results as we received from the proposed analytic method.

Antenna Enhanced Graphene THz Emitter and Detector.

Recent intense electrical and optical studies of graphene have pushed the material to the forefront of optoelectronic research. Of particular interest is the few terahertz (THz) frequency regime where efficient light sources and highly sensitive detectors are very challenging to make. Here we present THz sources and detectors made with graphene field effect transistors (GFETs) enhanced by a double-patch antenna and an on-chip silicon lens. We report the first experimental observation of 1-3 THz radiation from graphene, as well as more than 3 orders of magnitude performance improvements in a half-edge-contacted GFET thermoelectric detector operating at ∼2 THz. The quantitative analysis of the emitting power and its unusual charge density dependence indicate significant nonthermal noise contribution from the GFET. The polarization resolved detection measurements with different illumination geometries allow for detailed and quantitative analysis of various factors that contribute to the overall detector performance. Our experimental results represent a significant advance toward practically useful graphene THz devices.

Numerical Investigation of GaN HEMT Terahertz Detection Model Considering Multiple Scattering Mechanisms.

GaN high-electron-mobility transistor (HEMT) terahertz (THz) detectors have been widely studied and applied in the past few decades. However, there are few reports about the influence of GaN/AlGaN heterostructure material properties on the detection model at present. In this paper, a response voltage model for a GaN HEMT THz detector that considers the carrier scattering in a GaN/AlGaN heterostructure is proposed. The phonon scattering, dislocation scattering, and interface roughness scattering mechanisms are taken into account in the classic THz response voltage model; furthermore, the influence of various material parameters on the response voltage is studied. In a low-temperature region, acoustic scattering plays an important role, and the response voltage drops with an increase in temperature. In a high temperature range, optical phonon scattering is the main scattering mechanism, and the detector operates in a non-resonant detection mode. With an increase in carrier surface density, the response voltage decreases and then increases due to piezoelectric scattering and optical phonon scattering. For dislocation and interface roughness scattering, the response voltage is inversely proportional to the dislocation density and root mean square roughness (RMS) but is positively related to lateral correlation length. Finally, a comparison between our model and the reported models shows that our proposed model is more accurate.

A Novel Terahertz Detector Based on Asymmetrical FET Array in 55-nm Standard CMOS Process.

This paper reports a novel, one-dimensional dense array of asymmetrical metal-oxide-semiconductor field-effect-transistor (MOSFET) THz detector, which has been fabricated in GlobalFoundries 55-nm CMOS technology. Compared with other technologies, the Si-based complementary metal-oxide-semiconductor (CMOS) dominates in industrial applications, owing to its easier integration and lower cost. However, as the frequency increases, the return loss between the antenna and detector will increase. The proposed THz detector has a short-period grating structure formed by MOSFET fingers in the array, which can serve as an effective antenna to couple incident THz radiation into the FET channels. It not only solved the problem of return loss effectively, but also greatly reduced the detector area. Meanwhile, since the THz signal is rectified at both the source and drain electrodes to generate two current signals with equal amplitude but opposite directions, the source drain voltage is not provided to reduce the power consumption. This leads to a poor performance of the THz detector. Therefore, by using an asymmetric structure for the gate fingers position to replace the source drain voltage, the performance of the detector in the case of zero power consumption can be effectively improved. Compared with the symmetrical MOSFET THz detector, Rv is increased by 183.3% and NEP is decreased by 67.7%.

Lateral PbS Photovoltaic Devices for High Performance Infrared and Terahertz Photodetectors.

We fabricated a lateral photovoltaic device for use as infrared to terahertz (THz) detectors by chemically depositing PbS films on titanium substrates. We discussed the material properties of PbS films grown on glass with varying deposition conditions. PbS was deposited on Ti substrates and by taking advantage of the Ti/PbS Schottky junction, we discussed the photocurrent transients as well as the room temperature spectrum response measured by Fourier transform infrared (FTIR) spectrometer. Our photovoltaic PbS device operates at room temperature for wavelength ranges up to 50 µm, which is in the terahertz region, making the device highly applicable in many fields.

Fabrication of Graphene Nanomesh FET Terahertz Detector.

High sensitivity detection of terahertz waves can be achieved with a graphene nanomesh as grating to improve the coupling efficiency of the incident terahertz waves and using a graphene nanostructure energy gap to enhance the excitation of plasmon. Herein, the fabrication process of the FET THz detector based on the rectangular GNM (r-GNM) is designed, and the THz detector is developed, including the CVD growth and the wet-process transfer of high quality monolayer graphene films, preparation of r-GNM by electron-beam lithography and oxygen plasma etching, and the fabrication of the gate electrodes on the Si3N4 dielectric layer. The problem that the conductive metal is easy to peel off during the fabrication process of the GNM THz device is mainly discussed. The photoelectric performance of the detector was tested at room temperature. The experimental results show that the sensitivity of the detector is 2.5 A/W (@ 3 THz) at room temperature.