Effect of nanostructured zirconium dioxide incorporation in an experimental adhesive resin.

OBJECTIVES: The aim of this study was to evaluate the influence of nanostructured zirconium dioxide incorporation in an experimental adhesive resin. METHODS: ZrO2 particles were characterized by X-ray diffraction (XRD), micro-Raman spectroscopy and Brunauer-Emmett-Teller (B.E.T). Experimental adhesive resins were formulated with 0, 0.5, 1, 4.8, and 9.1% ZrO2 in weight. The adhesives were evaluated based on degree of conversion (DC), radiopacity, softening in solvent and microtensile bond strength (µTBS) 24 h and after 1 year of aging. Mineral deposition at the hybrid layer was assessed with micro-Raman spectroscopy at the baseline and after 14 days. RESULTS: XRD showed monoclinic and tetragonal phases of ZrO2.particles. B.E.T data revealed a surface area of 37.41 m2/g, and typical chemical groups were shown on the Raman spectra. The addition of ZrO2 did not influence the radiopacity. The addition of 4.8% and 9.1 wt.% ZrO2 showed higher initial hardness with increased softening in solvent (P < 0.05) and promoted mineral deposition at the dentin interface. DC was significantly increased in the group with 1% ZrO2 (P < 0.05). The µTBS test showed difference on the group with 9.1 wt.% of ZrO2, with a significant reduction after aging. CONCLUSION: The incorporation of ZrO2 promoted mineral deposition on the adhesive interface and the addition of 1 wt.% caused a significant increase on the DC without compromising the other physicochemical characteristics, which may prove promising for the development of new dental adhesive systems. CLINICAL RELEVANCE: The mineral deposition on the hybrid layer can result in a longer stability of the adhesive, thus delaying the hydrolytic degradation.

Synthesis and characterization of a glycerol salicylate resin for bioactive root canal sealers.

AIM: To develop and characterize a salicylate resin with potential use in bioactive endodontic sealers. METHODOLOGY: Methyl salicylate, glycerol and titanium isopropoxide were added in a closed system for the transesterification reaction. The resin obtained was characterized by proton nuclear magnetic resonance spectroscopy (1H NMR) and size exclusion chromatography (SEC). To verify the applicability of the resin to the development of endodontic sealers, experimental cements were prepared by mixing glycerol salicylate resin, calcium hydroxide and methyl salicylate in the ratios of 2 : 1 : 1, 1 : 2 : 1, 1 : 1 : 2, 1 : 1 : 1, 4 : 1 : 1, 1 : 4 : 1 and 1 : 1 : 4. Setting times were measured according to ISO 6876. Features of the hardening reaction were described by micro-RAMAN spectroscopy. RESULTS: The transesterification reaction had a 72% efficiency. The (1) H NMR analysis revealed the presence of the expected functional groups (hydroxyls and aromatic rings), and the SEC confirmed the molar mass of the resin produced. The setting times of experimental sealers ranged from 70 min (ratio 1 : 1 : 1) to 490 min (ratio 1 : 1 : 4). The conversion of the salicylic groups (1 613 cm(-1) ) to salicylate salt (1 543 cm(-1) ) and the reduction in calcium hydroxide peaks (1084 and 682 cm(-1) ) were confirmed by micro-RAMAN spectroscopy, which showed the calcium chelation by the resin. CONCLUSION: The new glycerol salicylate resin was successfully synthesized and revealed a potential application in the development of endodontic sealers.

Diffusion coefficients of water and leachables in methacrylate-based crosslinked polymers using absorption experiments.

The diffusion of water into dentin adhesive polymers and leaching of unpolymerized monomer from the adhesive are linked to their mechanical softening and hydrolytic degradation. Therefore, diffusion coefficient data are critical for the mechanical design of these polymeric adhesives. In this study, diffusion coefficients of water and leachables were obtained for sixteen methacrylate-based crosslinked polymers using absorption experiments. The experimental mass change data was interpreted using numerical solution of the two-dimensional diffusion equations. The calculated diffusion coefficients varied from 1.05 × 10(-8) cm(2)/sec (co-monomer TMTMA) to 3.15 × 10(-8) cm(2)/sec (co-monomer T4EGDMA). Correlation of the diffusion coefficients with crosslink density and hydrophilicity showed an inverse trend (R(2) = 0.41). The correlation of diffusion coefficient with crosslink density and hydrophilicity are closer for molecules differing by simple repeat units (R(2) = 0.95). These differences in the trends reveal mechanisms of interaction of the diffusing water with the polymer structure.

Fabrication and evaluation of Bis-GMA/TEGDMA resin with various amounts of silane-coated silica for orthodontic use.

The objective of this research was to fabricate a composite with an optimum filler level in a bisphenol-A-glycidyldimethacrylate (Bis-GMA) triethylene glycidal dimethacrylate (TEGDMA) resin for bonding of metallic orthodontic brackets to achieve the best handling characteristics with optimum bond strength and without compromising the mechanical properties of the adhesive. One-hundred and sixty extracted human premolars free of any detectable pathology or buccal surface alterations were collected and divided into four groups. In group 1 (control), the teeth were bonded with stainless steel brackets using Transbond XT. In groups 2, 3, and 4, the teeth were bonded with metal brackets using a Bis-GMA/TEGDMA resin with 80, 60, and 20 per cent by weight silane-coated silica of a spherical shape with a mean size of 0.01 µm. Shear bond strength (SBS) of the composites was determined and the adhesive remnant index (ARI) and enamel fracture post-debonding were assessed. According to one-way analysis of variance and Tukey's honestly significant difference (HSD) multiple comparison tests, the SBS of group 4 (10.54 MPa) was considerably less than that of groups 1 (26.1 MPa), 2 (25.5 MPa), and 3 (24.6 MPa). Chi-square analysis revealed that there was an insignificant difference in the incidence of enamel fracture between groups 1 and 2, while a significant difference was present between groups 1 and 2 and 3 and 4. An insignificant difference was also observed in the location of the adhesive failure between the four groups. While all the bonding adhesives tested can be safely used for bonding of brackets, 60 per cent filled Bis-GMA/TEGDMA was superior clinically due to its ease of handling and superior bond strength.

Preparation and mechanical property of poly(ε-caprolactone)-matrix composites containing nano-apatite fillers modified by silane coupling agents.

This study aims to improve the tensile strength and elastic modulus of nano-apatite/poly(ε-caprolactone) composites by silane-modification of the nano-apatite fillers. Three silane coupling agents were used to modify the surfaces of nano-apatite particles and composites of silanized apatite and PCL were prepared by a technique incorporating solvent dispersion, melting-blend and hot-pressing. The results showed that the silane coupling agents successfully modified the surfaces of nano-apatite fillers, and the crystallization temperatures of the silanized apatite/PCL composites were the higher than that of the non-silanized control material, although the melting temperature of the composites remained almost unaffected by silanization. The ultimate tensile strength and elastic modulus of the silanized composites reached 22.60 MPa and 1.76 GPa, as a result of the improved interfacial bonding and uniform dispersion of nano-apatite fillers. This study shows that the processing technique and silanization of nano-apatite particles can effectively improve the tensile strength and elastic modulus of nano-apatite/PCL composites.

Development of an antibacterial and anti-metalloproteinase dental adhesive for long-lasting resin composite restorations.

Despite all the advances in adhesive dentistry, dental bonds are still fragile due to degradation events that start during application of adhesive agents and the inherent hydrolysis of resin-dentin bonds. Here, we combined two outstanding processing methods (electrospinning and cryomilling) to obtain bioactive (antimicrobial and anti-metalloproteinase) fiber-based fillers containing a potent matrix metalloproteinase (MMP) inhibitor (doxycycline, DOX). Poly(ε)caprolactone solutions containing different DOX amounts (0, 5, 25, and 50 wt%) were processed via electrospinning, resulting in non-toxic submicron fibers with antimicrobial activity against Streptococcus mutans and Lactobacillus. The fibers were embedded in a resin blend, light-cured, and cryomilled for the preparation of fiber-containing fillers, which were investigated with antibacterial and in situ gelatin zymography analyzes. The fillers containing 0, 25, and 50 wt% DOX-releasing fibers were added to aliquots of a two-step, etch-and-rinse dental adhesive system. Mechanical strength, hardness, degree of conversion (DC), water sorption and solubility, bond strength to dentin, and nanoleakage analyses were performed to characterize the physico-mechanical, biological, and bonding properties of the modified adhesives. Statistical analyses (ANOVA; Kruskal-Wallis) were used when appropriate to analyze the data (α = 0.05). DOX-releasing fibers were successfully obtained, showing proper morphological architecture, cytocompatibility, drug release ability, slow degradation profile, and antibacterial activity. Reduced metalloproteinases (MMP-2 and MMP-9) activity was observed only for the DOX-containing fillers, which have also demonstrated antibacterial properties against tested bacteria. Adhesive resins modified with DOX-containing fillers demonstrated greater DC and similar mechanical properties as compared to the fiber-free adhesive (unfilled control). Concerning bonding performance to dentin, the experimental adhesives showed similar immediate bond strengths to the control. After 12 months of water storage, the fiber-modified adhesives (except the group consisting of 50 wt% DOX-loaded fillers) demonstrated stable bonds to dentin. Nanoleakage was similar among all groups investigated. DOX-releasing fibers showed promising application in developing novel dentin adhesives with potential therapeutic properties and MMP inhibition ability; antibacterial activity against relevant oral pathogens, without jeopardizing the physico-mechanical characteristics; and bonding performance of the adhesive.

Development of self-adhesive pulp-capping agents containing a novel hydrophilic and highly polymerizable acrylamide monomer.

Several studies have shown the clinical success of hydraulic calcium-silicate cements (hCSCs) for direct and indirect pulp capping and root repair. However, hCSCs have various drawbacks, including long setting time, poor mechanical properties, low bond strength to dentin, and relatively poor handling characteristics. To overcome these limitations, a light-curable, resin-based hCSC (Theracal LC, Bisco) was commercially introduced; however, it did not exhibit much improvement in bond strength. We developed a light-curable self-adhesive pulp-capping material that contains the novel acrylamide monomer N,N'-{[(2-acrylamido-2-[(3-acrylamidopropoxy)methyl]propane-1,3-diyl)bis(oxy)]bis(propane-1,3-diyl)}diacrylamide (FAM-401) and the functional monomer 4-methacryloxyethyl trimellitate anhydride (4-MET). Two experimental resin-based hCSCs containing different calcium sources (portlandite: Exp_Pl; tricalcium silicate cement: Exp_TCS) were prepared, and the commercial hCSCs Theracal LC and resin-free hCSC Biodentine served as controls. The performance of each cement was evaluated based on parameters relevant for vital pulp therapy, such as curing degree on a wet surface, mechanical strength, as determined using a three-point bending test, shear bond strength to dentin, cytotoxicity, as determined using an MTT assay, and the amount of calcium released, as determined using inductively coupled plasma atomic emission spectrometry. Both experimental cements cured on wet surfaces and showed relatively low cytotoxicity. Furthermore, their flexural and shear bond strength to dentin were significantly higher than those of the commercial references. High calcium release was observed for both Exp_Pl and Biodentine. Thus, Exp_Pl as a new self-adhesive pulp-capping agent performed better than the commercial resin-based pulp-capping agent in terms of mechanical strength, bond strength, and calcium release.

The impact of cement mixing and storage errors on the risk of failure of glass-ceramic crowns.

This study evaluated the impact of different mixing ratios and wrongly stored blends of dual-curing composite cements on Empress2 glass-ceramic crowns by means of a flexural strength test and a fracture resistance test. Thermally damaged blends and fresh blends were mixed using different mixing ratios of dual-curing Panavia F and Variolink II composite cement (2:1; 1:1; 1:1.5; 1:1.75; base/catalyst). Sixteen groups of rectangular beams of both cements (two blends, four ratios, chemical-curing, light-curing) were constructed. Their flexural strength was determined in a three-point bending test. Furthermore, 64 Empress2 all-ceramic crowns were luted onto human molars, again using fresh and thermally damaged blends as well as different mixing ratios of the luting agents. After aging, fracture resistance was investigated. The flexural strength of dual-curing composite cements was influenced to a statistically significant extent by mixing ratios and storage conditions. In particular, the chemical curing mode of these cements was affected by the thermal damage of the blends. However, this study could not demonstrate a significant impact on the fracture resistance of Empress2 glass-ceramic crowns when different mixing ratios or wrongly stored cements were used. Dual-curing composite luting agents seem to tolerate a wide range of mixing errors, but their chemical curing mode may be affected by storage errors.

Design of a new dental adhesive--effect of a water-soluble sodium acylphosphine oxide with crown ether on adhesion to dental hard tissues.

The behavior of water-soluble photoinitiators with crown ethers in dental adhesives is unknown. This study investigated the effect of sodium acylphosphine oxide (APO-Na) with crown ether in a hydrophobic adhesive on adhesion to teeth. Sodium 2,4,6-trimethylbenzoyl-phenylphosphine oxide (TMPO-Na = APO-Na) was synthesized in 67.1% yield and identified by 1H NMR. APO-Na was dissolved in hydrophobic resins in the presence of a crown ether (ionophore effect). Thirty kinds of experimental single-step adhesives comprising APO-Na, CE, Bis-GMA, 6-methacryloyloxyhexyl phosphonoacetate (6-MHPA), and 4-methacryloyloxyethyl trimellitic acid (4-MET) were thereby prepared. Shear bond strength to unetched ground teeth was measured at a crosshead speed of 1.0 mm/min, and the data were analyzed by ANOVA. The shear bond strength results of bonding resins containing APO-Na with 18-crown-6-ether (CE-6) were significantly higher than that without CE-6 (control) (p<0.05). Higher bond strength values [for enamel: BR24 at 19.3 (3.2) MPa; for dentin: BR29 at 20.2 (4.7) MPa] were achieved with the adhesives containing APO-Na, CE-6, 6-MHPA, and 4-MET. Therefore, it was found that APO-Na with CE-6 contributed to the efficient bonding performance of single-step adhesive to teeth. However, in view of the biosafety hazard posed by crown ethers, the search is still on for reagents that are biologically safer than crown ethers--but with ionophor effects--to be used in dental adhesives.

Evaluation of Dual-Cure Resin Cement Polymerization under Different Types and Thicknesses of Monolithic Zirconia.

PURPOSE: The aim of the present study was to investigate the effects of the type and thickness of the zirconia material on the microhardness of the underlying dual-cure resin cement. MATERIALS AND METHODS: Eight disk-shaped zirconia specimens with a 4-mm diameter and four varying thicknesses (0.5, 1.0, 1.5, and 2.0 mm) were fabricated from two different monolithic zirconia materials: posterior monolithic zirconia (Prettau) and anterior monolithic zirconia (Prettau Anterior). Dual-cure resin cement specimens with a 4-mm diameter and 5-mm height were prepared using Teflon cylinder molds and activated by light beneath the eight zirconia disks and without any zirconia disk for 20 s (n=12). A total of 108 specimens were embedded in acrylic. Vickers hardness of each specimen was measured at three different depths using a microhardness device with a 50-g load. All data were statistically evaluated using three-way ANOVA, one-way ANOVA, independent samples t-tests, and Bonferroni corrected post hoc tests (α=.05). RESULTS: Dual-cure resin cement's microhardness was significantly higher for the samples polymerized beneath anterior monolithic zirconia compared to posterior monolithic zirconia. The hardness decreased as the thickness increased for both types of zirconia; the latter was attributed to an attenuated curing efficiency. CONCLUSION: Microhardness of the dual-cure resin cement is influenced by both the type and the thickness of the monolithic zirconia restoration. Polymerization efficiency for resin cement cured under anterior monolithic zirconia may be superior to cured beneath posterior monolithic zirconia.

Interfacial Interaction between Suolunite Crystal and Silica Binding Peptide for Novel Bioinspired Cement.

Cement and concrete have been important construction materials throughout human history. There is an urgent need to explore novel and untraditional cementitious materials to enhance the durability of building materials and structures in response to increased infrastructure demand worldwide. We report an exploratory study on a biocomposite cement based on a large-scale computational study using density functional theory. An explicitly solvated mixture of a mineral calcium silicate hydrate (C-S-H) crystal suolunite (Ca2Si2O5(OH)2·H2O) and a silicon binding peptide with amino acid sequence PRO-PRO-PRO-TRP-LEU-PRO-TYR-MET-PRO-PRO-TRP-SER is constructed using ab initio molecular dynamics (AIMD). Detailed analysis on the interface structure, interatomic bonding, mechanical properties, and solvent effect of this model reveals a complex interplay of different types of covalent and ionic bonding, including ubiquitous hydrogen bonding which plays a crucial role in their properties. The use of the total bond order density (TBOD), a single quantum mechanical metric, for assessing the interfacial cohesion for this composite biocement is proposed. We find that the solvated model has a slightly larger TBOD than the dried one. These results could lead to a systematic search and rational design for different types of bioinspired and hybrid functional materials with other inorganic minerals and organic peptides.

Synthesis of phosphate monomers and bonding to dentin: esterification methods and use of phosphorus pentoxide.

OBJECTIVES: The aim of this study was to synthesize an acidic monomer using an alternative synthetic pathway and to evaluate the influence of the acidic monomer concentration on the microtensile bond strength to dentin. METHODS: The intermediary 5-hydroxypentyl methacrylate (HPMA) was synthesized through methacrylic acid esterification with 1,5-pentanediol, catalyzed by p-toluenesulfonic acid. To displace the reaction balance, the water generated by esterification was removed by three different methods: anhydrous sodium sulfate; molecular sieves or azeotropic distillation. In the next step, a phosphorus pentoxide (4.82 mmol) slurry was formed in cold acetone and 29 mmol of HPMA was slowly added by funnel addition. After the reaction ended, solvent was evaporated and the product was characterized by 1HNMR and FTIR. The phosphate monomer was introduced in a self-etch primer at concentrations of 0, 15, 30, 50, 70 and 100 wt%. Clearfil SE Bond was used as commercial reference. Microtensile bond strength to dentin was evaluated 24h after the bonding procedures, followed by fracture analysis (n=20). Data was submitted to ANOVA and Tukey's post hoc test. RESULTS: The highest yield was obtained (62%) when azeotropic distillation was used, while the reaction with molecular sieves was not feasible. The phosphoric moiety attachment to the monomer was successfully performed with a quantitative yield that reached around 100%. The acidic monomer concentration significantly affected the bond strength and the highest mean (55.1+/-12.8 MPa) was obtained when 50% of acidic monomer was used. CONCLUSION: The synthesis pathways described in the present study appear to be a viable alternative for developing phosphate monomers.

Influence of storage solution and curing method on a microhybrid composite microhardness.

AIM: The purpose of this study is to evaluate and compare the Vickers microhardness of one microhybrid composite polymerized with different sources and stored in different solutions for up to 14 days. METHODS: Using a bipartite PTFE mould with 6 mm inner diameter and 3 mm high, 30 samples were manufactured with Charisma B1 shade for each polymerization procedures (halogen light, LED and halogen light and postcure cycles) stored in tree types of storage solution. RESULTS: The postcuring method tended to improve the microhardness, but was not statistically different from halogen or LED curing methods (P>0.05). The storage solutions interfered in surface hardness, with the samples eluted in red wine showing the lowest hardness values (P<0.05). After seven days, the hardness values were higher than the first day, but statistically equal to 14 days (P<0.05). CONCLUSION: On accordance with the findings of this study, different storage solutions can change the surface microhardness of a composite resin. An alcoholic solution seems most harmful to the composite. Samples postcured in autoclave had an improved mean value, however, without differing from those of the LED and halogen photo polymerized specimens.

Fluoride containing bioactive glass composite for orthodontic adhesives - Apatite formation properties.

OBJECTIVES: Dental materials that can form apatite offer the potential to not only prevent demineralisation but enhance remineralisation of the enamel. The objective of this study was to investigate the ability of a novel BAG-resin adhesive to form apatite in 3 immersion media. METHODS: A novel fluoride containing BAG-resin adhesive described previously, with 80% by weight filler load, was used to fabricate 90 disks. Each disk was immersed in 10ml of either tris buffer (TB), or artificial saliva at pH=7 (AS7) or pH=4 (AS4). At ten time points (from 6h to 6 months), three disks were taken from each of the solutions and investigated by ATR-FTIR, XRD and SEM. RESULTS: The BAG-resin formed apatite on the disk surface, which increased with time, especially in AS4 and AS7. The apatite crystals formed in AS7 were highly oreintated and the oreintation increased with time. SIGNIFICANCE: This novel BAG-resin adhesive differs from the currently used adhesives by promting apatite formation, particularly under acidic conditions. Thus, applied in the clinical situation to bond orthodontic brackets, it may discourage the frequent occurrence of white spot lesion formation around the brackets.

Hydrogen bonds of a novel resin cement contribute to high adhesion strength to human dentin.

OBJECTIVE: The detachment of fiber posts from root canals is primarily caused by the loss of adhesion between dentin and cement; therefore, the purpose of this study was to formulate a novel resin cement that improves the bond strength of fiber posts to the dentin-cement interface. METHODS: Three concentrations (30, 35, and 40wt.%) of bis[2-(methacryloyloxy)-ethyl] phosphate (2MP) were prepared as dentin bonding agent components. Isobornyl acrylate (IBOA) and ethylhexylacrylate (EHA) were used as key components to fabricate the resin cement (named IE cement). The adhesive strengths of IE cement to coronal and root canal dentin were tested after placement of specimens in a water bath at 100% humidity and 37°C for either 24h or 5 months. The microtensile bond test, the push-out bond test, and the fracture toughness test were performed. Four commercially available resin cements (Nexus(®) third generation (NX3), Variolink II, RelyX Unicem, and Panavia F 2.0) were used for comparisons. X-ray photoelectron spectroscopy (XPS) was used to analyze the interaction of collagen extracted from human dentin and 2MP as well as the fracture surfaces of the specimens submitted to the microtensile bond test. RESULTS: The 35% concentration of 2MP, in combination with IBOA and EHA, was the most effective for improving the IE cement's bond strength to dentin. The XPS results revealed that the phosphate groups of 2MP formed hydrogen bonds with the collagen and that such bonds prominently decreased in number in the specimens that were stored for 5 months. SIGNIFICANCE: The combination of 2MP, IBOA, and EHA can effectively increase the adhesive strength of IE cement to dentin via hydrogen bond formation.

Thio-urethane oligomers improve the properties of light-cured resin cements.

Thio-urethanes were synthesized by combining 1,6-hexanediol-diissocyante (aliphatic) with pentaerythritol tetra-3-mercaptopropionate (PETMP) or 1,3-bis(1-isocyanato-1-methylethyl)benzene (aromatic) with trimethylol-tris-3-mercaptopropionate (TMP), at 1:2 isocyanate:thiol, leaving pendant thiols. Oligomers were added at 10-30 phr to BisGMA-UDMA-TEGDMA (5:3:2, BUT). 25 wt% silanated inorganic fillers were added. Commercial cement (Relyx Veneer, 3M-ESPE) was also evaluated with 10-20 phr of aromatic oligomer. Near-IR was used to follow methacrylate conversion (DC) and rate of polymerization (Rpmax). Mechanical properties were evaluated in three-point bending (ISO 4049) for flexural strength/modulus (FS/FM, and toughness), and notched specimens (ASTM Standard E399-90) for fracture toughness (KIC). Polymerization stress (PS) was measured on the Bioman. Volumetric shrinkage (VS, %) was measured with the bonded disk technique. Results were analyzed with ANOVA/Tukey's test (α=5%). In general terms, for BUT cements, conversion and mechanical properties in flexure increased for selected groups with the addition of thio-urethane oligomers. The aromatic versions resulted in greater FS/FM than aliphatic. Fracture toughness increased by two-fold in the experimental groups (from 1.17 ± 0.36 MPam(1/2) to around 3.23 ± 0.22 MPam(1/2)). Rpmax decreased with the addition of thio-urethanes, though the vitrification point was not statistically different from the control. VS and PS decreased with both oligomers. For the commercial cement, 20 phr of oligomer increased DC, vitrification, reduced Rpmax and also significantly increased KIC, and reduced PS and FM. Thio-urethane oligomers were shown to favorably modify conventional dimethacrylate networks. Significant reductions in polymerization stress were achieved at the same time conversion and fracture toughness increased.

A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles.

OBJECTIVE: To develop an antimicrobial orthodontic band cement for the prevention of white spot lesions using a novel process that generates silver nanoparticles (AgNP) in situ. MATERIALS AND METHODS: Twenty-seven groups of AgNP-loaded Opal Band Cement (OBC) and two control groups were formulated with varying concentrations of additional benzoyl peroxide (0.5, 1.0, 1.5, or 2.0 wt%) and 2,2-(p-Tolylimino) diethanol (0.5 or 1 wt%). Rockwell15T hardness and near-infrared FTIR were used to assess degree of cure, three-point bending was used to determine modulus and ultimate transverse strength (UTS), and Ag(+) ion release was measured for up to 4 months in vitro using atomic absorption spectroscopy. Antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus was tested in vitro by counting colony-forming units for up to 28 days. Biocompatibility was evaluated following ISO specifications 7405 (2008), 10993-3 (2003), 10993-5 (2009), and 10993-10 (2010). RESULTS: Most of the experimental groups had hardness, modulus, and UTS values similar to those of the control group. Ag(+) ion release was observed for all AgNP-loaded groups for up to 4 months. Increase in Ag loading increased Ag(+) ion release and in vitro antimicrobial effect. The biocompatibility of the optimal AgNP-loaded OBC was comparable to that of negative controls. CONCLUSION: A novel antimicrobial orthodontic band cement was developed that has comparable mechanical properties to controls, controlled and sustained Ag(+) ion release, significant bacterial inhibition in vitro, and excellent biocompatibility.

An amino acid-modified and non-HEMA containing glass-ionomer cement.

It is known that unreacted 2-hydroxyethyl methacrylate (HEMA) in current resin modified glass ionomer cements (RMGICs) shows potential cytotoxicity to pulp and surrounding tissues. Elimination of HEMA could make RMGICs more attractive for dental applications. In this research, novel six acrylate and methacrylate derivatives of amino acids were synthesized, characterized and used for replace HEMA in RMGICs. The experimental RMGICs were formulated with vinyl-containing polymer, amino acid derivative, water, and commercial Fuji II LC glass. Among all the derivatives, methacryloyl beta-alanine (MBA) was selected for further formulations due to its relatively low solution viscosity and high CS. Effects of polymer content and powder/liquid, P/L, ratio were significant. The formulation with liquid composition of 50/25/25 (polymer/MBA/water) and P/L ratio of 2.7/1 was found the optimal. It appears that this novel non-HEMA-containing RMGIC system based on amino acid derivatives will be a better dental restorative because it demonstrated improved mechanical strengths and may eliminate potential cytotoxicity in current RMGICs caused by leached HEMA. The optimal MBA-modified GIC were 20% higher in CS, 70% higher in DTS and 93% higher in FS, compared to Fuji II LC.

Doxycycline-encapsulated nanotube-modified dentin adhesives.

This article presents details of fabrication, biological activity (i.e., anti-matrix metalloproteinase [anti-MMP] inhibition), cytocompatibility, and bonding characteristics to dentin of a unique doxycycline (DOX)-encapsulated halloysite nanotube (HNT)-modified adhesive. We tested the hypothesis that the release of DOX from the DOX-encapsulated nanotube-modified adhesive can effectively inhibit MMP activity. We incorporated nanotubes, encapsulated or not with DOX, into the adhesive resin of a commercially available bonding system (Scotchbond Multi-Purpose [SBMP]). The following groups were tested: unmodified SBMP (control), SBMP with nanotubes (HNT), and DOX-encapsulated nanotube-modified adhesive (HNT+DOX). Changes in degree of conversion (DC) and microtensile bond strength were evaluated. Cytotoxicity was examined on human dental pulp stem cells (hDPSCs). To prove the successful encapsulation of DOX within the adhesives-but, more important, to support the hypothesis that the HNT+DOX adhesive would release DOX at subantimicrobial levels-we tested the antimicrobial activity of synthesized adhesives and the DOX-containing eluates against Streptococcus mutans through agar diffusion assays. Anti-MMP properties were assessed via ß-casein cleavage assays. Increasing curing times (10, 20, 40 sec) led to increased DC values. There were no statistically significant differences (p > .05) in DC within each increasing curing time between the modified adhesives compared to SBMP. No statistically significant differences in microtensile bond strength were noted. None of the adhesives eluates were cytotoxic to the human dental pulp stem cells. A significant growth inhibition of S. mutans by direct contact illustrates successful encapsulation of DOX into the experimental adhesive. More important, DOX-containing eluates promoted inhibition of MMP-1 activity when compared to the control. Collectively, our findings provide a solid background for further testing of encapsulated MMP inhibitors into the synthesis of therapeutic adhesives that may enhance the longevity of hybrid layers and the overall clinical performance of adhesively bonded resin composite restorations.

Calcium hydroxide, pH-neutralization and formulation of model self-adhesive resin cements.

OBJECTIVES: This study investigated the incorporation of calcium hydroxide (CH) and its effect on pH-neutralization and fundamental properties of model self-adhesive resin cements (SARCs). METHODS: Two-paste SARCs were obtained. Paste A: UDMA/Bis-GMA/TEGDMA/HEMA co-monomer, 25% phosphate monomer (GDMA-P), and 50% glass fillers; Paste B: UDMA/HEMA co-monomer, water, photoinitiators, and 60% glass fillers. CH was added at final concentrations of 0 (control), 0.25%, 0.5%, 1%, 2%, and 4%. Equal volumes of the pastes were mixed before testing. pH-neutralization of the eluate was followed during 24-h storage in distilled water. Other physico-chemical properties were evaluated only for the control and CH concentrations that neutralized the eluate. These evaluations included degree of CC conversion, film thickness, flexural strength/modulus, work-of-fracture, hardness, depth of cure, water sorption/solubility, and dentin bond strength. Statistical comparisons were conducted at a 5% significance level. RESULTS: All CH concentrations above 0.25% caused pH increase of the eluate at 24h. The only CH concentrations leading to pH-neutralization were 2% and 4%. Compared with the control cement, the addition of 4% CH decreased the flexural strength, flexural modulus, work-of-fracture, CC conversion, and dentin bond strength. The cement with 2% CH had similar properties to the control cement, except for lower work-of-fracture and lower film thickness. Hardness, depth of cure, and water sorption were not affected by CH. The cement with 4% CH had lower solubility and film thickness than the other materials. SIGNIFICANCE: Incorporation of 2% CH to SARCs may lead to pH-neutralization without dramatically affecting other material properties.