MMP-2-Activatable Photoacoustic Tumor Imaging Probes Based on Al- and Si-Naphthalocyanines.

Enzyme-activatable photoacoustic probes are powerful contrast agents to visualize diseases in which a specific enzyme is overexpressed. In this study, aluminum and silicon naphthalocyanines (AlNc and SiNc, respectively) conjugated with matrix metalloprotease-2 (MMP-2)-responsive PLGLAG peptide sequence and poly(ethylene glycol) (PEG) as an axial ligand were designed and synthesized. AlNc-peptide-PEG conjugates AlNc-pep-PEG formed dimeric species interacting with each other through face-to-face H-aggregation in water, while SiNc-based conjugates SiNc-pep-PEG hardly interacted with each other because of the two bulky hydrophilic axial ligands. Both conjugates formed spherical nanometer-sized self-assemblies in water, generating photoacoustic waves under near-infrared photoirradiation. The treatment of MNc-peptide-PEG conjugates (M = Al, Si) with MMP-2 smoothly induced the cleavage of the PLGLAG sequence to release the hydrophilic PEG moiety, resulting in the aggregation of MNcs. By comparing the PA signal intensity changes at 680 and 760 nm, the photoacoustic signal intensity ratios were shown to be enhanced by 3-5 times after incubation with MMP-2. We demonstrated that MNc-peptide-PEG conjugates (M = Al, Si) could work as activatable photoacoustic probes in the in vitro experiment of MMP-2-overexpressed cell line HT-1080 as well as the in vivo photoacoustic imaging of HT-1080-bearing mice.

Formulation and Characterization of Microcapsules Encapsulating PC12 Cells as a Prospective Treatment Approach for Parkinson's Disease.

Parkinson's disease (PD) is the second most common neurological disorder, associated with decreased dopamine levels in the brain. The goal of this study was to assess the potential of a regenerative medicine-based cell therapy approach to increase dopamine levels. In this study, we used rat adrenal pheochromocytoma (PC12) cells that can produce, store, and secrete dopamine. These cells were microencapsulated in the selectively permeable polymer membrane to protect them from immune responses. For fabrication of the microcapsules, we used a modified Buchi spray dryer B-190 that allows for fast manufacturing of microcapsules and is industrially scalable. Size optimization of the microcapsules was performed by systematically varying key parameters of the spraying device. The short- and long-term stabilities of the microcapsules were assessed. In the in vitro study, the cells were found viable for a period of 30 days. Selective permeability of the microcapsules was confirmed via dopamine release assay and micro BCA protein assay. We found that the microcapsules were permeable to the small molecules including dopamine and were impermeable to the large molecules like BSA. Thus, they can provide the protection to the encapsulated cells from the immune cells. Griess's assay confirmed the non-immunogenicity of the microcapsules. These results demonstrate the effective fabrication of microcapsules encapsulating cells using an industrially scalable device. The microcapsules were stable, and the cells were viable inside the microcapsules and were found to release dopamine. Thus, these microcapsules have the potential to serve as the alternative or complementary treatment approach for PD.

Binding of a Fatty Acid-Functionalized Anderson-Type Polyoxometalate to Human Serum Albumin.

The Anderson-type hexamolybdoaluminate functionalized with lauric acid (LA), (TBA)3[Al(OH)3Mo6O18{(OCH2)3CNHCOC11H23}]·9H2O (TBA-AlMo6-LA, where TBA = tetrabutylammonium), was prepared via two synthetic routes and characterized by thermogravimetric and elemental analyses, mass spectrometry, IR and 1H NMR spectroscopy, and powder and single-crystal X-ray diffraction. The interaction of TBA-AlMo6-LA with human serum albumin (HSA) was investigated via fluorescence and circular dichroism spectroscopy. The results revealed that TBA-AlMo6-LA binds strongly to HSA (63% quenching at an HSA/TBA-AlMo6-LA ratio of 1:1), exhibiting static quenching. In contrast to TBA-AlMo6-LA, the nonfunctionalized polyoxometalate, Na3(H2O)6[Al(OH)6Mo6O18]·2H2O (AlMo6), showed weak binding toward HSA (22% quenching at a HSA/AlMo6 ratio of 1:25). HSA binding was confirmed by X-ray structure analysis of the HSA-Myr-AlMo6-LA complex (Myr = myristate). These results provide a promising lead for the design of novel polyoxometalate-based hybrids that are able to exploit HSA as a delivery vehicle to improve their pharmacokinetics and bioactivity.

Local Structure Modulation Induced Highly Efficient Far-Red Luminescence of La1- xLu xAlO3:Mn4+ for Plant Cultivation.

Modulating the local environment around the emitting ions with component screening to increase the quantum yield and thermal stability is an effective and promising strategy for the design of high-performance fluorescence materials. In this work, smaller Lu3+ was introduced into the La3+ site in a Mn4+-activated LaAlO3 phosphor with the expectation of improving the luminescence properties via lattice contraction induced by cation substitution. Finally, a La1- xLu xAlO3:Mn4+ ( x = 0-0.04) perovskite phosphor with a high quantum yield of 86.0% and satisfactory thermal stability was achieved, and the emission peak at 729 nm well matches with the strongest absorption peak of the Phytochrome PFR. The favorable performances could be attributed to the suppressed cell volume and superior lattice rigidity after the substitution of Lu3+. This work not only obtains a highly efficient La1- xLu xAlO3:Mn4+ ( x = 0.02) phosphor, which holds great potential for application in plant-cultivation light-emitting diodes, but also provides an applicable strategy for further investigation of far-red-emitting phosphors.

Electrolytic synthesis of aqueous aluminum nanoclusters and in situ characterization by femtosecond Raman spectroscopy and computations.

The selective synthesis and in situ characterization of aqueous Al-containing clusters is a long-standing challenge. We report a newly developed integrated platform that combines (i) a selective, atom-economical, step-economical, scalable synthesis of Al-containing nanoclusters in water via precision electrolysis with strict pH control and (ii) an improved femtosecond stimulated Raman spectroscopic method covering a broad spectral range of ca. 350-1,400 cm(-1) with high sensitivity, aided by ab initio computations, to elucidate Al aqueous cluster structures and formation mechanisms in real time. Using this platform, a unique view of flat [Al13(µ3-OH)6(µ2-OH)18(H2O)24](NO3)15 nanocluster formation is observed in water, in which three distinct reaction stages are identified. The initial stage involves the formation of an [Al7(µ3-OH)6(µ2-OH)6(H2O)12](9+) cluster core as an important intermediate toward the flat Al13 aqueous cluster.

In situ high pressure NMR study of the direct synthesis of NaAlH4.

The direct synthesis of NaAlH4 has been studied, for the first time, by in situ (27)Al and (23)Na wide-line NMR spectroscopy using high pressure NMR apparatus. Na3AlH6 formation is observed within two minutes of hydrogen addition, while NaAlH4 is detected after a total of four minutes. This indicates the formation of the hexahydride does not proceed to completion before the formation of the tetrahydride ensues.

Combustion synthesis of blue-emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor.

Long persistence phosphor CaAl4O7:Eu(2+), Dy(3+) were prepared by a combustion method. The phosphors were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl4O7:Eu(2+), Dy(3+) phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu(2+) in the host lattices. The lifetime decay curve of the Dy(3+) co-doped CaAl4O7:Eu(2+) phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long-persistent mechanism of CaAl4O7:Eu(2+), Dy(3+) phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long-lasting phosphors for the purposes of sign boards and defence.

Room temperature radiolytic synthesized Cu@CuAlO(2)-Al(2)O(3) nanoparticles.

Colloidal Cu@CuAlO(2)-Al(2)O(3) bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a (60)Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO(2)-Al(2)O(3) nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO(2)-Al(2)O(3) nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation.

Crystal structure of [Al4(OH)6(H2O)12][Al(H2O)6]2Br12: a new polyaluminum compound.

A vertex-shared tetrahedral [Al(4)(OH)(6)(H(2)O)(12)](6+) (Al(4)) and a disordered [Al(H(2)O)(6)](3+) (Al(1)) that coexist in a 1:2 ratio within each unit cell were observed in the structure of [Al(4)(OH)(6)(H(2)O)(12)][Al(H(2)O)(6)](2)Br(12), which crystallized in a cubic Fd3m space group from a spontaneously hydrolyzed solution of AlBr(3). The former is composed of four AlO(6) octahedra that are connected to each other by sharing three vertexes of each octahedron and form a large regular tetrahedron with ideal T(d) symmetry. The central Al(3+) ion of the latter is coordinated by 6 disordered OH(2) molecules, that form a core-shell structure with ideal D(3d) symmetry.

A giant polyaluminum species S-Al32 and two aluminum polyoxocations involving coordination by sulfate ions S-Al32 and S-K-Al13.

The giant polyaluminum species [Al32O8(OH)60(H2O)28(SO4)2](16+) (S-Al32) and [Al13O4(OH)25(H2O)10(SO4)](4+) (S-K-Al13) [S means that sulfate ions take part in coordination of the aluminum polycation; K represents the Keggin structure] were obtained in the structures of [Al32O8(OH)60(H2O)28(SO4)2][SO4]7[Cl]2·30H2O and [Al13O4(OH)25(H2O)10(SO4)]4[SO4]8·20H2O, respectively. They are the first two aluminum polyoxocations coordinated by sulfate ions. The "core-shell" structure of S-Al32 is similar to that of Al30, but the units are linked by two [Al(OH)2(H2O)3(SO4)](-) groups with replacement of four η(1)-H2O molecules. The structure of S-K-Al13 is similar to the well-known structure of ε-K-Al13, but the units are linked by two (SO4(2-))0.5 with replacement of a H3O(+) ion. It was shown that strong interaction exists between the polyoxocations and counterions. On the basis of their structural features and preparation conditions, a formation and evolution mechanism (from ε-K-Al13 to S-K-Al13 and S-Al32) has been proposed. A local basification degree symmetrical equalization principle was extracted based on a comparison of the calculated results of the local basification degree for each central Al(3+) ion included in a polycation. They can be used to explain how the two aluminum species are formed and evolved and why the sulfate ions can coordinate to them and to predict where the OH-bridging positions will be upon further hydrolysis.

Use of industrial byproducts as alumina sources for the synthesis of calcium sulfoaluminate cements.

Calcium sulfoaluminate (CSA) cements show some desirable environmentally friendly features that include the possibility of using several industrial byproducts as raw materials in their manufacturing process. Alumina powder, from the secondary aluminum manufacture, and anodization mud, from the production process of anodized aluminum, have proved to be suitable as partial or total substitutes for an expensive natural material like bauxite. CSA clinker generating raw mixtures, containing limestone, natural gypsum, bauxite, and/or one of the alumina-rich byproducts, were heated 2 h in a laboratory electric oven at temperatures ranging from 1150 to 1300 °C. Conversion of reactants into 4CaO·3Al(2)O(3)·SO(3) (the key component of CSA cements), evaluated using X-ray diffraction (XRD) analysis, increased with an increase of both burning temperature and byproduct concentration. When examined through differential thermogravimetric and XRD analyses, a synthetic CSA clinker (made from the raw mixture incorporating alumina powder as a total replacement of bauxite) mixed with 20% gypsum showed a hydration behavior almost similar to that of an industrial CSA cement containing the same amount of gypsum.

Preparation and characterization of nicotine-magnesium aluminum silicate complex-loaded sodium alginate matrix tablets for buccal delivery.

Nicotine (NCT) buccal tablets consisting of sodium alginate (SA) and nicotine-magnesium aluminum silicate (NCT-MAS) complexes acting as drug carriers were prepared using the direct compression method. The effects of the preparation pH levels of the NCT-MAS complexes and the complex/SA ratios on NCT release, permeation across mucosa, and mucoadhesive properties of the tablets were investigated. The NCT-MAS complex-loaded SA tablets had good physical properties and zero-order release kinetics of NCT, which indicate a swelling/erosion-controlled release mechanism. Measurement of unidirectional NCT release and permeation across porcine esophageal mucosa using a modified USP dissolution apparatus 2 showed that NCT delivery was controlled by the swollen gel matrix of the tablets. This matrix, which controlled drug diffusion, resulted from the molecular interactions of SA and MAS. Tablets containing the NCT-MAS complexes prepared at pH 9 showed remarkably higher NCT permeation rates than those containing the complexes prepared at acidic and neutral pH levels. Larger amounts of SA in the tablets decreased NCT release and permeation rates. Additionally, the presence of SA could enhance the mucoadhesive properties of the tablets. These findings suggest that SA plays the important role not only in controlling release and permeation of NCT but also for enhancing the mucoadhesive properties of the NCT-MAS complex-loaded SA tablets, and these tablets demonstrate a promising buccal delivery system for NCT.

Thermal dissociation of tripropylamine as the first step in the growth of carbon nanotubes inside AlPO4-5 channels.

Tripropylamine (TPA) is a template for the synthesis of porous AlPO(4)-5, whose calcination in the absence of air leads to the formation of 4 A single-walled carbon nanotubes. The thermal dissociation of TPA is the first step in this remarkable process. We examined the dissociation mechanisms of TPA by first principles calculations, under three types of conditions. In the gas phase, the unimolecular dissociation was a complex process initiated by the breaking of either the N-C(alpha) and the C(alpha)-C(beta) bonds. Within a confined space inside neutral zeolitic channels, the diffusion of H radicals enhanced a cycle of reactions to produce dipropylamine and monopropylamine, in agreement with experimental observations. In the presence of an acidic site, the dissociation of TPA was catalyzed to produce ammonia and propylene molecules, which were identified as the precursors for the eventual formation of carbon nanotubes.

High-throughput aided synthesis of the porous metal-organic framework-type aluminum pyromellitate, MIL-121, with extra carboxylic acid functionalization.

A new porous metal-organic framework (MOF)-type aluminum pyromellitate (MIL-121 or Al(OH)[H(2)btec]·(guest), (guest = H(2)O, H(4)btec = pyromellitic acid) has been isolated by using a high-throughput synthesis method under hydrothermal conditions. Its structure was determined from powder X-ray diffraction analysis using synchrotron radiation (Soleil, France) and exhibits a network closely related to that of the MIL-53 series. It is a three-dimensional (3D) framework containing one-dimensional (1D) channels delimited by infinite trans-connected aluminum-centered octahedra AlO(4)(OH)(2) linked through the pyromellitate ligand. Here the organic ligand acts as tetradendate linker via two of the carboxylate groups. The two others remain non-bonded in their protonated form, and this constitutes a rare case of the occurrence of both bonding and non-bonding organic functionalities of the MOF family. The non-coordinated -COOH groups points toward the channels to get them an open form configuration. Within the tunnels are located unreacted pyromellitic acid and water species, which are evacuated upon heating, and a porous MIL-121 phase is obtained with a Brunauer-Emmett-Teller (BET) surface area of 162 m(2) g(-1). MIL-121 has been characterized by IR, thermogravimetry (TG) analyses, and solid state NMR spectroscopy employing a couple of two-dimensional (2D) techniques such as (1)H-(1)H SQ-DQ BABA, (1)H-(1)H SQ-SQ RFDR, (27)Al{(1)H} CPHETCOR and (27)Al MQMAS.

Microwave-assisted regioselective ring opening of non-activated aziridines by lithium aluminium hydride.

A new synthetic protocol for the LiAlH(4)-promoted reduction of non-activated aziridines under microwave conditions was developed. Thus, ring opening of 2-(acetoxymethyl)aziridines provided the corresponding beta-amino alcohols, which were then used as eligible substrates in the synthesis of 5-methylmorpholin-2-ones via condensation with glyoxal in THF. The same procedure was applied for the preparation of novel 5(R)- and 5(S)-methylmorpholin-2-ones starting from the corresponding enantiopure 2-(hydroxymethyl)aziridines. Additionally, 2-(methoxymethyl)- and 2-(phenoxymethyl)aziridines were treated with LiAlH(4) under microwave irradiation, giving rise to either isopropylamines or 1-methoxypropan-2-amines depending on the reaction conditions.

Cooperative structure-directing effect in the synthesis of aluminophosphate molecular sieves in ionic liquids.

In situ two-dimensional NMR and fluorescence emission spectroscopy were employed to investigate the cooperative structure-direction effect of organic amine such as morpholine in the synthesis of aluminophosphate molecular sieves in ionic liquids. In situ rotating frame nuclear Overhauser effect spectra (ROESY) together with fluorescence measurements demonstrate that the aggregates between imidazolium cations and morpholines through intermolecular hydrogen bonds can be formed in the gel during the crystallization of molecular sieves. Combining with the characterizations of the solid products by solid-state NMR, it is verified that different aggregates of organic amines with imidazolium cations, which is similar to self-assembled supramolecular analogues, could act as the structure-directing agents for selective tuning of the framework topologies such as AEL, AFI and LTA in the final solid products.

The effect of various mixing techniques on the surface microhardness of mineral trioxide aggregate.

AIM: To evaluate the influence of various mixing procedures including ultrasonic vibration, trituration of customized encapsulated mineral trioxide aggregate (MTA) and condensation on the Vickers surface microhardness of MTA. METHODOLOGY: ProRoot MTA Original, ProRoot MTA (white), MTA-Angelus (grey) and MTA White Angelus (white) were prepared using several mixing techniques including ultrasonic vibration, trituration of customized encapsulated MTA and conventional condensation. Twelve experimental groups (four materials: three techniques) were evaluated, each with 35 samples. All samples were incubated after preparation and subjected to Vickers surface microhardness testing after 4 and 28 days. Data was were subjected to a two-way anova. RESULT: At 28 days, the surface microhardness value was significantly greater for all experimental groups compared to 4 days after mixing (P < 0.00001). The application of ultrasonic energy to MTA produced significantly higher surface microhardness values compared to the other mixing techniques at both 4 and 28 days (P < 0.0001). However, no significant difference existed between condensation and trituration techniques at both time intervals. Regardless of the mixing technique employed, a significant difference (P < 0.0001) was observed in surface microhardness value between all types of MTA apart from between Angelus grey and ProRoot white at both 4 and 28 days, both of which produced the highest values. CONCLUSION: Compared to trituration and condensation techniques, the application of ultrasonic energy to MTA produced a significantly higher surface microhardness value at both 4 and 28 days. Irrespective of mixing technique, ProRoot white and Angelus grey had the highest surface microhardness values. Trituration of encapsulated, premeasured MTA and water provides a standardiszed method of mixing that produces MTA slurries with more controllable handling characteristics.

Synthesis of the long-persistence phosphor CaAl2O4:Eu2+, Dy3+, Nd3+ by combustion method and its luminescent properties.

Calcium aluminate phosphor co-doped Eu(2+), Dy(3+), Nd(3+) is prepared by the combustion method. We study systemically the influences of the quantity of mixed Dy(3+) ion, the quantity of flux H(3)BO(3), the differences in dispersing methods between magnetic stirring and ultrasonic dispersing and the combustion temperature on the long-persistence phosphor. The analytical results indicate that Dy(3+) ion improves the properties of the phosphors CaAl(2)O(4):Eu(2+), Nd(3+). The appropriate quantity of flux H(3)BO(3 )to( )reduce the forming temperature of the sample was determined. The monoclinic single phase of CaAl(2)O(4) formed at 500 degrees C and remained steady. The calcium aluminate co-doped Eu(2+), Dy(3+), Nd(3+) was synthesized by dispersal of the raw material using the ultrasonic method, and it had better optical properties.

Molecular insights into the self-aggregation of aromatic molecules in the synthesis of nanoporous aluminophosphates: a multilevel approach.

Fluorescence spectroscopy and a range of computer simulation techniques are used to study the structure directing effect of benzylpyrrolidine (BP) and (S)-(-)-N-benzylpyrrolidine-2-methanol (BPM) in the synthesis of nanoporous aluminophosphate frameworks with AFI (one-dimensional channels) and SAO (three-dimensional interconnected channels) topologies. We study the supramolecular chemistry of BP and BPM molecules in aqueous solution and compare it with the aggregation state of the molecules found when they are inside the AlPO nanopores after crystallization. The aggregation of the molecules within the structures can be explained by a combination of thermodynamic and kinetic effects. The former are given by the stability of the molecular species interacting with the oxide networks relative to their stability in solution; the latter depend on the aggregation behavior of the molecules in the synthesis gels prior to crystallization. Whereas BPM only forms one type of aggregate in solution, which has the appropriate conformation to match the empty channels of the forming nanoporous frameworks, BP forms aggregates with different molecular orientations, of which only one matches the framework interstices. This different supramolecular chemistry, together with the higher interaction of BPM with the oxide networks, makes BPM a better structure directing agent (SDA); it is also responsible for the higher incorporation of BPM as dimers in the frameworks, especially in the AFI structure, observed experimentally. The concentration of the SDA molecules in the gels, and so the density per volume of the SDAs, determines the exclusion zone from which the pores and/or cavities of the framework will arise, and so the porous network of the formed material. A clear relationship between the SDA density in solution and in the framework is observed, thus enabling an eventual control of the material density by adjusting the SDA concentration in the gels. The topological instability intrinsic to these open framework structures is compensated by a high host-guest interaction energy; the SAO topology is further stabilized by doping with Zn. Our computational results account for and rationalize all the effects observed experimentally, providing a complete picture of the mode of structure direction of these aromatic molecules in the synthesis of nanoporous aluminophosphates.

Biomimetic synthesis of aluminophosphate nanorolls induced by mixed organoamines.

Natural kingite-like aluminophosphate nanorolls were obtained by biomimetic synthesis using a mixed-organoamine template.