DNA ladders can be used to size polyphosphate resolved by polyacrylamide gel electrophoresis.

PAGE is often used to resolve inorganic polyphosphates (polyP), but unfortunately polyP size ladders are not commercially available. Since several dyes that are commonly used to detect nucleic acids in gels also stain polyP, we examined the utility of commercially available DNA size ladders for estimating polyP polymer lengths by gel electrophoresis. Narrow size fractions of polyP were prepared and their polymer lengths were quantified using NMR. Commercially available DNA ladders and these polyP fractions were then subjected to PAGE to determine the relationship between migration of DNA vs polyP, which was found to be: log10 (dsDNA length in bp) = 1.66 × log10 (polyP length in phosphate units) - 1.97. This relationship between DNA and polyP size held for a variety of different polyacrylamide concentrations, indicating that DNA size ladders can readily be employed to estimate polyP polymer lengths by PAGE.

A modified gelatin zymography technique incorporating total protein normalization.

Gelatinase zymography is a commonly used laboratory procedure; however, variability in sample loading and concentration reduce the accuracy of quantitative results obtained from this technique. To facilitate normalization of gelatinase activity by loaded protein amount, we developed a protocol using the trihalocompound 2,2,2-trichloroethanol to allow for gelatin zymography and total protein labeling within the same gel. We showed that detected protein levels increased linearly with loading, and describe a loading concentration range over which normalized gelatinase activity was constant. We conclude that in-gel total protein detection is feasible in gelatin zymography and greatly improves comparison of gelatinase activity between samples.

Integrated protocol for reliable and fast quantification and documentation of electrophoresis gels.

Quantitative analysis of electrophoresis gels is an important part in molecular cloning, as well as in protein expression and purification. Parallel quantifications in yield and purity can be most conveniently obtained from densitometric analysis. This communication reports a comprehensive, reliable and simple protocol for gel quantification and documentation, applicable for single samples and with special features for protein expression screens. As major component of the protocol, the fully annotated code of a proprietary open source computer program for semi-automatic densitometric quantification of digitized electrophoresis gels is disclosed. The program ("GelQuant") is implemented for the C-based macro-language of the widespread integrated development environment of IGOR Pro.

Reappraisal of quantitative gel zymography for matrix metalloproteinases.

BACKGROUND: The determination of matrix metalloproteases (MMPs) is relevant in many pathophysiological conditions, especially if associated with extracellular matrix remodeling; however, the results obtained are closely linked to the method used and are not directly comparable. The aim of this study was to perform a reappraisal of quantitative gel zymography technique for MMPs in human plasma, to use for comparison with commercially available ELISA and in those experimental conditions where the MMP active form needs to be revealed. METHODS: The critical methodological parameters of zymography were checked and a comparison with a routinely used ELISA was performed. RESULTS: Sensitivity and reproducibility levels of zymography are suitable for detection of MMP-9 in human plasma, providing results closely related to those obtained by ELISA. CONCLUSIONS: Analytical parameters of zymography were suitable for detection of MMPs in human plasma. Quantitative zymography for MMPs is an alternative method for comparing the results of ELISA widely employed for MMP determination, thus reducing the discrepancies between laboratories regarding gelatinase assay.

Quality control and stability studies with the monoclonal antibody, trastuzumab: application of 1D- vs. 2D-gel electrophoresis.

Recombinant monoclonal antibodies (rmAbs) are medicinal products obtained by rDNA technology. Consequently, like other biopharmaceuticals, they require the extensive and rigorous characterization of the quality attributes, such as identity, structural integrity, purity and stability. The aim of this work was to study the suitability of gel electrophoresis for the assessment of charge heterogeneity, post-translational modifications and the stability of the therapeutic, recombinant monoclonal antibody, trastuzumab. One-dimensional, SDS-PAGE, under reducing and non-reducing conditions, and two-dimensional gel electrophoresis were used for the determination of molecular mass (Mr), the isoelectric point (pI), charge-related isoform patterns and the stability of trastuzumab, subjected to stressed degradation and long-term conditions. For the assessment of the influence of glycosylation in the charge heterogeneity pattern of trastuzumab, an enzymatic deglycosylation study has been performed using N-glycosidase F and sialidase, whereas carboxypeptidase B was used for the lysine truncation study. Experimental data documented that 1D and 2D gel electrophoresis represent fast and easy methods to evaluate the quality of biological medicinal products. Important stability parameters, such as the protein aggregation, can be assessed, as well.

Resolution-enhanced native acidic gel electrophoresis: a method for resolving, sizing, and quantifying prion protein oligomers.

The formation of ß-sheet-rich prion protein (PrP(ß)) oligomers from native or cellular PrP(c) is thought to be a key step in the development of prion diseases. To assist in this characterization process we have developed a rapid and remarkably high resolution gel electrophoresis technique called RENAGE (resolution-enhanced native acidic gel electrophoresis) for separating, sizing, and quantifying oligomeric PrP(ß) complexes. PrP(ß) oligomers formed via either urea/salt or acid conversion can be resolved by RENAGE into a clear set of oligomeric bands differing by just one subunit. Calibration of the size of the PrP(ß) oligomer bands was made possible with a cross-linked mouse PrP(90-232) ladder (1- to 11-mer) generated using ruthenium bipyridyl-based photoinduced cross-linking of unmodified proteins (PICUP). This PrP PICUP ladder allowed the size and abundance of PrP(ß) oligomers formed from urea/salt and acid conversion to be determined. This distribution consists of 7-, 8-, 9-, 10-, and 11-mers, with the most abundant species being the 8-mer. The high-resolution separation afforded by RENAGE has allowed us to investigate distinctive size and population changes in PrP(ß) oligomers formed under various conversion conditions, with various construct lengths, from various species or in the presence of anti-prion compounds.

Application of deglycosylation to SDS PAGE analysis improves calibration of influenza antigen standards.

Each year the production of seasonal influenza vaccines requires antigen standards to be available for the potency assessment of vaccine batches. These are calibrated and assigned a value for haemagglutinin (HA) content. The calibration of an antigen standard is carried out in a collaborative study amongst a small number of national regulatory laboratories which are designated by WHO as Essential Regulatory Laboratories (ERLs) for the purposes of influenza vaccine standardisation. The calibration involves two steps; first the determination of HA protein in a primary liquid standard by measurement of total protein in a purified influenza virus preparation followed by determination of the proportion of HA as determined by PAGE analysis of the sample; and second, the calibration of the freeze-dried reference antigen against the primary standard by single radial immunodiffusion (SRD) assay. Here we describe a collaborative study to assess the effect of adding a deglycosylation step prior to the SDS-PAGE analysis for the assessment of relative HA content. We found that while the final agreed HA value of the samples tested was not significantly different with or without deglycosylation, the deglycosylation step greatly improved between-laboratory agreement.

Detergent binding explains anomalous SDS-PAGE migration of membrane proteins.

Migration on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) that does not correlate with formula molecular weights, termed "gel shifting," appears to be common for membrane proteins but has yet to be conclusively explained. In the present work, we investigate the anomalous gel mobility of helical membrane proteins using a library of wild-type and mutant helix-loop-helix ("hairpin") sequences derived from transmembrane segments 3 and 4 of the human cystic fibrosis transmembrane conductance regulator (CFTR), including disease-phenotypic residue substitutions. We find that these hairpins migrate at rates of -10% to +30% vs. their actual formula weights on SDS-PAGE and load detergent at ratios ranging from 3.4-10 g SDS/g protein. We additionally demonstrate that mutant gel shifts strongly correlate with changes in hairpin SDS loading capacity (R(2) = 0.8), and with hairpin helicity (R(2) = 0.9), indicating that gel shift behavior originates in altered detergent binding. In some cases, this differential solvation by SDS may result from replacing protein-detergent contacts with protein-protein contacts, implying that detergent binding and folding are intimately linked. The CF-phenotypic V232D mutant included in our library may thus disrupt CFTR function via altered protein-lipid interactions. The observed interdependence between hairpin migration, SDS aggregation number, and conformation additionally suggests that detergent binding may provide a rapid and economical screen for identifying membrane proteins with robust tertiary and/or quaternary structures.

Quantitative gel electrophoresis: new records in precision by elaborated staining and detection protocols.

Gel electrophoresis (GE) is a very common analytical technique for proteome research and protein analysis. Despite being developed decades ago, there is still a considerable need to improve its precision. Using the fluorescence of Colloidal Coomassie Blue -stained proteins in near-infrared (NIR), the major error source caused by the unpredictable background staining is strongly reduced. This result was generalized for various types of detectors. Since GE is a multi-step procedure, standardization of every single step is required. After detailed analysis of all steps, the staining and destaining were identified as the major source of the remaining variation. By employing standardized protocols, pooled percent relative standard deviations of 1.2-3.1% for band intensities were achieved for one-dimensional separations in repetitive experiments. The analysis of variance suggests that the same batch of staining solution should be used for gels of one experimental series to minimize day-to-day variation and to obtain high precision.

Western Blotting Using In-Gel Protein Labeling as a Normalization Control: Advantages of Stain-Free Technology.

Western blotting is one of the most used techniques in research laboratories. It is popular because it is an easy way of semiquantifying protein amounts in different samples. In Western blotting, the most commonly used method for controlling the differences in the amount of protein loaded is to independently quantify housekeeping proteins (typically actin, GAPDH or tubulin). Another less commonly used method is total protein normalization using stains, such as Ponceau S or Coomassie Brilliant Blue, which stains all the proteins on the blots. A less commonly used but powerful total protein staining technique is stain-free normalization. The stain-free technology is able to detect total protein in a large linear dynamic range and has the advantage of allowing protein detection on the gel before transblotting. This chapter discusses the theory, advantages, and method used to do total protein quantification using stain-free gels for normalization of Western blots.