Harnessing antimicrobial peptides in endodontics.

Endodontic therapy includes various procedures such as vital pulp therapy, root canal treatment and retreatment, surgical endodontic treatment and regenerative endodontic procedures. Disinfection and tissue repair are crucial for the success of these therapies, necessitating the development of therapeutics that can effectively target microbiota, eliminate biofilms, modulate inflammation and promote tissue repair. However, no current endodontic agents can achieve these goals. Antimicrobial peptides (AMPs), which are sequences of amino acids, have gained attention due to their unique advantages, including reduced susceptibility to drug resistance, broad-spectrum antibacterial properties and the ability to modulate the immune response of the organism effectively. This review systematically discusses the structure, mechanisms of action, novel designs and limitations of AMPs. Additionally, it highlights the efforts made by researchers to overcome peptide shortcomings and emphasizes the potential applications of AMPs in endodontic treatments.

Microrobotics in endodontics: A perspective.

Microorganisms are the primary aetiological factor of apical periodontitis. The goal of endodontic treatment is to prevent and eliminate the infection by removing the microorganisms. However, microbial biofilms and the complex root canal anatomy impair the disinfection process. Effective and precise endodontic therapy could potentially be achieved using advanced multifunctional technologies that have the ability to access hard-to-reach surfaces and perform simultaneous biofilm killing, removal, and detection of microorganisms. Advances in microrobotics are providing novel therapeutic and diagnostic opportunities with high precision and efficacy to address current biofilm-related challenges in biomedicine. Concurrently, multifunctional magnetic microrobots have been developed to overcome the disinfection challenges of current approaches to disrupt, kill, and retrieve biofilms with the goal of enhancing the efficacy and precision of endodontic therapy. This article reviews the recent advances of microrobotics in healthcare and particularly advances to overcome disinfection challenges in endodontics, and provides perspectives for future research in the field.

Comparing accuracy in guided endodontics: dynamic real-time navigation, static guides, and manual approaches for access cavity preparation - an in vitro study using 3D printed teeth.

OBJECTIVES: To assess root canal localization accuracy using a dynamic approach, surgical guides and freehand technique in vitro. MATERIALS AND METHODS: Access cavities were prepared for 4 different 3D printed tooth types by 4 operators (n = 144). Deviations from the planning in angle and bur positioning were compared and operating time as well as tooth substance loss were evaluated (Kruskal-Wallis Test, ANOVA). Operating method, tooth type, and operator effects were analyzed (partial eta-squared statistic). RESULTS: Angle deviation varied significantly between the operating methods (p < .0001): freehand (9.53 ± 6.36°), dynamic (2.82 ± 1.8°) and static navigation (1.12 ± 0.85°). The highest effect size was calculated for operating method (ηP²=0.524), followed by tooth type (0.364), and operator (0.08). Regarding deviation of bur base and tip localization no significant difference was found between the methods. Operating method mainly influenced both parameters (ηP²=0.471, 0.379) with minor effects of tooth type (0.157) and operator. Freehand technique caused most substance loss (p < .001), dynamic navigation least (p < .0001). Operating time was the shortest for freehand followed by static and dynamic navigation. CONCLUSIONS: Guided endodontic access may aid in precise root canal localization and save tooth structure. CLINICAL RELEVANCE: Although guided endodontic access preparation may require more time compared to the freehand technique, the guided navigation is more accurate and saves tooth structure.

Guided Endodontic Surgery: A Narrative Review.

Background and objectives: Endodontic surgery has evolved over the last two decades. The use of state-of-the-art guided endodontic surgical procedures produces a predictable outcome in the healing of lesions of endodontic origin. The main objective of this review paper is to define and characterize guided surgical endodontics as well as its benefits and drawbacks by reviewing the most recent relevant scientific literature. Methods: A literature search was conducted using multiple databases comprising of MEDLINE (via PubMed), EMBASE, and Web of Science. The terms used for the search were 'guided endodontics', 'surgical endodontics', and 'endodontic microsurgery'. Results: In total, 1152 articles were obtained from the analysis of the databases. Unrelated articles from the available full text of 388 articles were excluded. A total of 45 studies were finally included in the review. Conclusions: Surgical-guided endodontics is a relatively new area of study that is still maturing. It has many applications such as root canal access and localization, microsurgical endodontics, endodontic retreatment, and glass fiber post removal. Additionally, it does not matter how experienced the operator is; the procedure can be completed for the patient in less time and provides greater accuracy and safety than conventional endodontics.

Present status and future directions: Surgical endodontics.

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown and root resections, surgical perforation repair and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. Whilst nonsurgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

Use of Highly Accurate Devices for a First Lower Premolar Endodontic Treatment with Multiple Root Canals.

This case report highlights the importance of using a dental operating microscope (DOM) and ultrasonic endodontic tips (UETs) to locate all root canals in the lower first premolar. A 53-year-old woman presented to our clinic with pain in the lower right first premolar. After a detailed search using a DOM and UETs, three root canals were found, prepared with rotary HyFlex endodontic files, and obturated using the lateral condensation technique. At the five-year follow-up after treatment, the tooth was completely restored and fulfilling its function, with no signs or symptoms of any post-treatment flare-up.

Insight into the Reaction of Alexidine with Sodium Hypochlorite: A Potential Error in Endodontic Treatment.

Therapeutic success in endodontic treatment depends on successful infection control. Alexidine dihydrochloride (ALX) was recently proposed as a potential alternative to 2% chlorhexidine (CHX) as it possesses similar antimicrobial properties, expresses substantivity and does not produce p-chloroaniline (PCA) when mixed with sodium hypochlorite (NaOCl). However, the products released in this reaction have not been described to date. The aim of this study was to identify detected chemical compounds formed in the reaction of ALX and NaOCl with the ultra-high-performance liquid chromatography-mass spectrophotometry (UHPLC-MS) method and assess whether precipitates and PCA are formed in this reaction. Solutions of ALX were mixed with the equivalent volume of 2% and 5.25% (w/v) NaOCl solutions. As control, 2% (w/v) CHX was mixed with 2% and 5.25% (w/v) NaOCl. Samples were subjected to the UHPLC-MS analysis. The mixture of ALX and NaOCl resulted in a yellowish precipitate formation, the amount of which depended on NaOCl concentration. Interaction of ALX and NaOCl resulted in the production of aliphatic amines. No PCA was formed when NaOCl was mixed with ALX. However, for the first time, we identified the possible products of the interaction. The interaction between NaOCl and ALX results in the formation of aliphatic amines; therefore, these compounds should not be mixed during endodontic treatment.

Technical note: surgical guide for computer-aided endodontic surgery.

INTRODUCTION: CBCT combined to intra-oral scansion are the means to build an endodontic surgical guide to perform an easier and safer access to the apex in endodontic micro-surgery. . METHODS: A 38-year-old woman presented chronic apical periodontitis, which involved the three roots of 16 that was treated by endodontic therapy several years ago elsewhere. The palatine channel was retreated, the mesio- and disto- buccal roots were instead treated with apicoectomy. A surgical template was printed by a 3D printer to obtain greater precision in the surgical access. CONCLUSIONS: Endodontic microsurgery has evolved over the years. New tools have been introduced to improve therapy, even if the basic principles have not changed. In fact, according to the literature, it is necessary to cut at least 3 mm of root to be sure of eliminating the anatomical variations and the accessory channels. Several Authors have devoted themselves to creating an endodontic surgical template, some in vitro and others in vivo. The present paper introduces a new method that allows a more conservative osteotomy and greater precision the surgical access. Further investigation are needed to test and improve the effectiveness of the treatment but this technique seems very promising because it is less invasive for the patient and simplifies the work for the dentist who can perform micro-surgery in an easier and faster way.

Filling ability of three variants of the single-cone technique with bioceramic sealer: a micro-computed tomography study.

The present study evaluated the quality of single-cone root canal fillings with bioceramic (BC) sealer using three different techniques by means of micro-computed tomography (micro-CT). The canals of 30 extracted single-rooted permanent teeth were shaped with R40 Reciproc blue files and filled with the single-cone technique (SCT). BioRoot RCS BC sealer was placed inside the canals with one of the following master cones: R40 cone to working length (RWL, n = 10); R40 cone trimmed 1 mm short of working length (RWL-1, n = 10); non-standardized gutta-percha cone to working length (NSWL, n = 10). A quantitative and qualitative micro-CT analysis assessed the filling quality and internal/external voids formation. Collected data underwent statistical analysis by multivariate one-way analysis of variance (α = 0.05). In all groups, the voids were minimal and prevalently external. The NSWL and RWL-1 groups had increased sealer ratios in the whole canal and the apical canal portion, respectively. The lowest amounts of voids were found in the RWL group; the void volumes were slightly greater in the RWL-1 mm and NSWL groups, especially at the apical level. Two alternative SCTs showed satisfactory filling ability, uniform distribution of the BC sealer, and a minimally increased voids formation compared to the standard SCT with dedicated cone. The two tested alternative SCTs could take advantage of the beneficial characteristics of the BC sealer, which evenly filled the endodontic space, ideally sealing both the major and the accessory communications with the periodontium.

The effect of intracanal medicaments used in Endodontics on the dislocation resistance of two calcium silicate-based filling materials.

BACKGROUND: Intracanal medicaments can be used in various endodontic conditions including multiple visit endodontics after trauma or in regenerative endodontics. These medicaments should be removed from the root canal before the placement of the filling or repair material. The aim of the present study was to evaluate the effect of prior calcium hydroxide (Ca(OH)2) and modified triple antibiotic paste (mTAP) placement on the push-out bond strength of TotalFill BC fast set putty (BC fast set putty) to root dentin when compared to mineral trioxide aggregate (MTA). METHODS: The root canals of 45 extracted mandibular premolars were prepared to a standardized internal diameter (1.5 mm). The specimens were randomly assigned to 3 groups according to the intracanal medicament used: mTAP (a mixture of metronidazole, ciprofloxacin, and cefaclor), Ca(OH)2, and no intracanal medicament. After 1 week, the medicaments were removed, and the middle third of the roots were cut into two transverse sections (2.0 ± 0.05) (n = 90 slices). Thereafter, the specimens were divided into two subgroups (n = 45 each): MTA or BC putty. After 1 week, the push-out test was performed and failure mode was evaluated. The data were statistically analyzed using two-way ANOVA and Tukey's post hoc. RESULTS: The application of the intracanal medicament did not significantly affect the bond strength of BC putty (p > .05). For MTA, the prior application of Ca(OH)2 or mTAP significantly decreased the dislocation resistance (p < .05). Specimens in the MTA subgroups showed an almost equal number of cohesive and mixed types of failure while the majority of the specimens in the BC putty subgroups revealed the cohesive type. CONCLUSIONS: Ca(OH)2 and mTAP promoted lower bond strength of MTA to root dentin compared to the control group. However, the BC fast set putty bond strength to dentin was not affected by prior medication with Ca(OH)2 or mTAP.

Temporal-controlled bioactive molecules releasing core-shell nano-system for tissue engineering strategies in endodontics.

Temporal-controlled release of bioactive molecules is of key importance in the clinical translation of tissue engineering techniques. We engineered a core-shell nano-system (TD-NS) that sequentially released transforming growth factor-ß1 (TGF-ß1), a chemotactic/proliferating growth factor and dexamethasone (Dex), an osteo/odontogenic agent in a temporal-controlled manner. In stage-1, there was a rapid release of TGF-ß1, reaching a concentration of 2 ng/mL of TGF-ß1 in 7 days to 14 days, which tapers subsequently. In stage-2, Dex was released linearly from 9 days to 28 days. The TD-NS group showed a significantly higher (P < 0.05) osteo/odontogenic differentiation compared to the control and free TGF-ß1 group (Free-TD) that was further corroborated with animal models/histochemical examination. The findings from this study highlighted the potential of temporal-controlled delivery of TGF-ß1 and Dex from a single nano-carrier to direct spatial and temporal-control for a cell-free tissue engineering strategy in the treatment of apical periodontitis.

Enhanced mechanical properties and biosafety evaluation of surface-modified fiberglass-reinforced resin-based composite piles.

The purpose of this study is to analyze various surface grafting modifications of fiberglass-reinforced resin based composite piles. In addition, the effects of surface modifications of fiberglass-reinforced resin piles in terms of biosafety and mechanical strength were studied. According to different surface treatment methods, the fiberglass was divided into five groups (A-E): a blank control group, a KH570 processing group, a KH570 processing+Bis-GMA grafting 1 h group, a KH570 processing+Bis-GMA grafting 3 h group and a KH570 processing+Bis-GMA grafting 7 h group. All surface-treated materials were characterized using scanning electron microscope, thermogravimetric analyses and Fourier transform infrared spectrum and mechanical testing using a universal mechanical tester. The biosafety was evaluated by cell viability experiments and repeated oral toxicity tests and Ames tests. The Bis-GMA grafting modification further enhanced the mechanical properties of resin piles. By increasing the grafting time, the grafting effect and mechanical properties were further enhanced. The surfaces grafted for 7 h (Group E) remarkably improved the mechanical properties (flexural strength ~696.24 MPa; flexural load ~185.67N). The graft modifications improved the mechanical properties of fiber pile resin-based materials. The prolonged grafting time further improved the mechanical properties corresponding to enhanced grafting and the formation of a stable interface between fibers and the resin matrix. The surface-modified dental resin-based fiber did not show any signs of toxicity, cytotoxicity or mutagenicity, suggesting the potential biological safety of these materials in the clinical practice.

Maintenance of the aseptic working field during endodontic treatment.

Objective: The aim of this clinical quality study was to determine whether the aseptic working field is maintained during the endodontic procedure. Materials and methods: Bacterial samples were collected from the rubber dam of 27 patients during endodontic treatment performed by postgraduate students at the Department of Endodontics, University of Oslo. A bacterial sample was first obtained immediately after disinfection of the working field (A), and the second sample was collected just before obturation or dressing with calcium hydroxide cement (B). Aerobic cultivation technique and PCR were used for detection of bacterial growth and species. Results: All samples were negative on culturing except in one case, which showed positive results with cultivation in both sample A and B. Specie detected with cultivation technique were Streptococcus mitis. With PCR technique, 6 samples in 5 patients (11%), showed positive results. Species detected with PCR technique were Bacteroidales spp. Propionibacterium spp., Bacteroidetes spp., Prevotella nigrescens, Haemophilus parainfluenzae, Neisseria elongata, Alloprevotella tannerae, Capnocytophaga granulosa, Cardiobacterium hominis, Fusobacterium nucleatum and Streptococcus mitis. Conclusion: The present study showed that an aseptic working field was maintained throughout the endodontic procedure in 81% (22/27) of the cases after disinfection of the rubber dam.

Risk Factor in Endodontic Treatment: Topographic Evaluation of Mandibular Posterior Teeth and Lingual Cortical Plate Using Cone Beam Computed Tomography (CT).

BACKGROUND Topographic relationships of mandibular posterior teeth with mandibular cortical plate are extremely important both in terms of infection spread and endodontic and surgical procedures to be performed. The aim of this study was to determine the relationship between root apex of the mandibular posterior teeth and lingual plate of the mandible. MATERIAL AND METHODS CBCT data of 138 patients were retrospectively analyzed. The topographic relationship between root apex and lingual plate was classified as non-contact, contact, or perforation. Morphology of the mandibular lingual plate was classified into the 4 types (convex, parallel, undercut, slanted) and recorded for each tooth region. The prevalence of each group was calculated. RESULTS In 6.2% of all mandibular posterior teeth, the lingual plate was perforated by at least 1 root of the corresponding tooth. The teeth with the highest perforation rate were the third molar tooth (31.6%) and the second molar tooth (14.7%). The most common mandibular lingual plate morphology type was "undercut type" (61.3%) in the molar teeth region, while "parallel type" (55.7%) was most common in the premolar teeth region. CONCLUSIONS In conclusion, a high percentage of mandibular second and third molars root apex have topographically close relationships to the lingual plate of the mandible. Hence, endodontic consultants must be aware by this anatomical relationship and be aware of possible complications during endodontic and surgical procedures using radiographical modalities.

Endodontic applications of 3D printing.

Computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies can leverage cone beam computed tomography data for production of objects used in surgical and nonsurgical endodontics and in educational settings. The aim of this article was to review all current applications of 3D printing in endodontics and to speculate upon future directions for research and clinical use within the specialty. A literature search of PubMed, Ovid and Scopus was conducted using the following terms: stereolithography, 3D printing, computer aided rapid prototyping, surgical guide, guided endodontic surgery, guided endodontic access, additive manufacturing, rapid prototyping, autotransplantation rapid prototyping, CAD, CAM. Inclusion criteria were articles in the English language documenting endodontic applications of 3D printing. Fifty-one articles met inclusion criteria and were utilized. The endodontic literature on 3D printing is generally limited to case reports and pre-clinical studies. Documented solutions to endodontic challenges include: guided access with pulp canal obliteration, applications in autotransplantation, pre-surgical planning and educational modelling and accurate location of osteotomy perforation sites. Acquisition of technical expertise and equipment within endodontic practices present formidable obstacles to widespread deployment within the endodontic specialty. As knowledge advances, endodontic postgraduate programmes should consider implementing 3D printing into their curriculums. Future research directions should include clinical outcomes assessments of treatments employing 3D printed objects.

Validation of contralateral premolars as the substrate for endodontic comparison studies.

AIM: To use micro-CT technology and metrology software to validate the use of contralateral premolars as samples in endodontic comparison studies by comparing them before and after canal instrumentation with one instrumentation system. Furthermore, to determine whether contralateral premolar roots (CPRs) will yield non-significantly different outcomes regarding shaping ability (volume), degree of twisting and three-dimensional shape changes. The null-hypothesis (H0 ) is that there are no differences between the CPRs pre- or post-instrumentation. METHODOLOGY: Twenty-eight extracted human contralateral premolars (n = 44 contralateral roots) from 12 donor patients were scanned with microcomputed tomography before and after instrumentation. Root canal lengths (RCLs) were measured visually using a dental-operating microscope, electronic apex locator and micro-CT scans. Data were analysed statistically for differences between pre- and post-instrumentation. RESULTS: Instrumentation increased the volume of the canals significantly (P < 0.05). Degree of twisting for a majority (83%) of the contralateral roots pairs did not change significantly (P > 0.05). There was no significant difference (P > 0.05) in the shape deviation analysis between contralateral pairs. There was no significant difference (P > 0.05) for RCL between the contralateral pairs for any of the three endometric methods. CONCLUSION: Contralateral premolar root canals were associated with similar changes in terms of volume, three-dimensional shape and degree of twisting from pre- to post-instrumentation. There was no difference between the CPR pairs pre- and post-instrumentation, and the study validates contralateral premolars as samples for root canal comparison studies. The null-hypothesis (H0 ) could not be rejected.

Evaluation of the bioactivity of fluoride-enriched mineral trioxide aggregate on osteoblasts.

AIM: To investigate whether a combination of mineral trioxide aggregate (MTA) and fluoride compounds affects bone cells. METHODOLOGY: Mineral trioxide aggregate (MTA) discs (ProRoot® , Dentsply Sirona, Ballaigues, Switzerland) with and without the addition of 0.1%, 0.25% and 0.5% sodium fluoride were characterized for their surface roughness by laser scanning microscopy and for the adhesion of human alveolar osteoblasts by scanning electron microscopy. Using eluates from fluoride-enriched MTA discs, the cell proliferation was measured by monitoring the DNA incorporation of 5-bromo-2'-deoxyuridine. Further, gene expression was evaluated by qPCR arrays, extracellular matrix mineralization was quantified by absorption measurement of Alizarin red stains, and effects were calculated with repeated measures analysis and post hoc P-value adjustment. RESULTS: Irrespective of fluoride addition, cell adhesion was similar on MTA discs, of which the surface roughness was comparable. Control osteoblasts had a curvilinear proliferation pattern peaking at d5, which was levelled out by incubation with MTA. The addition of fluoride partly restored the MTA-related reduction in the cellular proliferation rate in a dose-dependent manner. At the mRNA level, both fluoride and MTA modulated a number of genes involved in osteogenesis, bone mineral metabolism and extracellular matrix formation. Although MTA significantly impaired extracellular matrix mineralization, the addition of fluoride supported the formation of mineralized nodules in a dose-dependent manner. CONCLUSION: The addition of fluoride modulated the biocompatibility of MTA in terms of supporting bone cell proliferation and hard tissue formation. Hence, fluoride enrichment is a trend-setting advancement for MTA-based endodontic therapies.

Amplification of pressure waves in laser-assisted endodontics with synchronized delivery of Er:YAG laser pulses.

When attempting to clean surfaces of dental root canals with laser-induced cavitation bubbles, the resulting cavitation oscillations are significantly prolonged due to friction on the cavity walls and other factors. Consequently, the collapses are less intense and the shock waves that are usually emitted following a bubble's collapse are diminished or not present at all. A new technique of synchronized laser-pulse delivery intended to enhance the emission of shock waves from collapsed bubbles in fluid-filled endodontic canals is reported. A laser beam deflection probe, a high-speed camera, and shadow photography were used to characterize the induced photoacoustic phenomena during synchronized delivery of Er:YAG laser pulses in a confined volume of water. A shock wave enhancing technique was employed which consists of delivering a second laser pulse at a delay with regard to the first cavitation bubble-forming laser pulse. Influence of the delay between the first and second laser pulses on the generation of pressure and shock waves during the first bubble's collapse was measured for different laser pulse energies and cavity volumes. Results show that the optimal delay between the two laser pulses is strongly correlated with the cavitation bubble's oscillation period. Under optimal synchronization conditions, the growth of the second cavitation bubble was observed to accelerate the collapse of the first cavitation bubble, leading to a violent collapse, during which shock waves are emitted. Additionally, shock waves created by the accelerated collapse of the primary cavitation bubble and as well of the accompanying smaller secondary bubbles near the cavity walls were observed. The reported phenomena may have applications in improved laser cleaning of surfaces during laser-assisted dental root canal treatments.

Direct and Indirect Restorations for Endodontically Treated Teeth: A Systematic Review and Meta-analysis, IAAD 2017 Consensus Conference Paper.

PURPOSE: The primary objective of this systematic review was to compare treatment outcomes of direct and indirect permanent restorations in endodontically treated teeth, and provide clinical suggestions for restoring teeth after endodontic treatment. MATERIALS AND METHODS: Electronic databases (Medline, EMBASE, CENTRAL) and gray literature were screened for articles in English that reported on prospective and retrospective clinical studies of direct or indirect restorations after endodontic treatment with an observation period of at least 3 years. Primary outcomes were determined to be short-term (≤ 5 years) and medium-term (> 5 and ≤ 10 years) survival. Secondary outcomes included restorative and endodontic success of restored teeth. The quality of included studies and risk of bias were assessed using Cochrane Collaboration's tool for RCTs (randomized controlled trials), the Newcastle-Ottawa Scale for cohort studies, and the Agency for Healthcare Research and Quality (AHRQ) methodology checklist for cross-sectional studies. The GRADE system was used for assessing collective strength of the overall body of evidence. RESULTS: Of 2547 screened articles, only 9 (2 RCTs, 3 retrospective cohort studies, 3 cross-sectional studies) met the inclusion criteria, and 8 studies were used in the meta-analysis. In general, indirect restorations (mostly full crowns) showed higher 5-year survival (OR 0.28, 95% CI 0.19-0.43, p < 0.00001) and 10-year survival (OR 0.20, 95% CI 0.12-0.31, p < 0.00001) than direct restorations. However, there was no statistical difference in short-term (≤ 5-years) restorative success (OR 0.32, 95% CI 0.05-2.12, p = 0.24) and endodontic success (OR 0.88, 95% CI 0.72-1.08, p = 0.22). CONCLUSIONS: Based on current evidence, there is a weak recommendation for indirect restorations to restore endodontically treated teeth, especially for teeth with extensive coronal damage. Indirect restorations using mostly crowns have higher short-term (5-year) and medium-term (10-year) survival than do direct restorations using composite or amalgam (GRADE quality of evidence: low to moderate), but no difference in short-term (≤ 5 years) restorative success (low quality) and endodontic success (very low quality). There is a need for high-quality clinical trials, especially well-designed RCTs.