Combined genome and transcriptome analysis of elite fiber quality in Gossypium barbadense.

Gossypium barbadense, which is one of several species of cotton, is well known for its superior fiber quality. However, the genetic basis of its high-quality fiber remains largely unexplored. Here, we resequenced 269 G. barbadense accessions. Phylogenetic structure analysis showed that the set of accessions was clustered into 3 groups: G1 and G2 mainly included modern cultivars from Xinjiang, China, and G3 was related to widely introduced accessions in different regions worldwide. A genome-wide association study of 5 fiber quality traits across multiple field environments identified a total of 512 qtls (main-effect QTLs) and 94 qtlEs (QTL-by-environment interactions) related to fiber quality, of which 292 qtls and 57 qtlEs colocated with previous studies. We extracted the genes located in these loci and performed expression comparison, local association analysis, and introgression segment identification. The results showed that high expression of hormone-related genes during fiber development, introgressions from Gossypium hirsutum, and the recombination of domesticated elite allelic variation were 3 major contributors to improve the fiber quality of G. barbadense. In total, 839 candidate genes with encoding region variations associated with elite fiber quality were mined. We confirmed that haplotype GB_D03G0092H traced to G. hirsutum introgression, with a 1-bp deletion leading to a frameshift mutation compared with GB_D03G0092B, significantly improved fiber quality. GB_D03G0092H is localized in the plasma membrane, while GB_D03G0092B is in both the nucleus and plasma membrane. Overexpression of GB_D03G0092H in Arabidopsis (Arabidopsis thaliana) significantly improved the elongation of longitudinal cells. Our study systematically reveals the genetic basis of the superior fiber quality of G. barbadense and provides elite segments and gene resources for breeding high-quality cotton cultivars.

Genome-wide association study of fiber quality traits in US upland cotton (Gossypium hirsutum L.).

KEY MESSAGE: A GWAS in an elite diversity panel, evaluated across 10 environments, identified genomic regions regulating six fiber quality traits, facilitating genomics-assisted breeding and gene discovery in upland cotton. In this study, an elite diversity panel of 348 upland cotton accessions was evaluated in 10 environments across the US Cotton Belt and genotyped with the cottonSNP63K array, for a genome-wide association study of six fiber quality traits. All fiber quality traits, upper half mean length (UHML: mm), fiber strength (FS: g tex-1), fiber uniformity (FU: %), fiber elongation (FE: %), micronaire (MIC) and short fiber content (SFC: %), showed high broad-sense heritability (> 60%). All traits except FE showed high genomic heritability. UHML, FS and FU were all positively correlated with each other and negatively correlated with FE, MIC and SFC. GWAS of these six traits identified 380 significant marker-trait associations (MTAs) including 143 MTAs on 30 genomic regions. These 30 genomic regions included MTAs identified in at least three environments, and 23 of them were novel associations. Phenotypic variation explained for the MTAs in these 30 genomic regions ranged from 6.68 to 11.42%. Most of the fiber quality-associated genomic regions were mapped in the D-subgenome. Further, this study confirmed the pleiotropic region on chromosome D11 (UHML, FS and FU) and identified novel co-localized regions on D04 (FU, SFC), D05 (UHML, FU, and D06 UHML, FU). Marker haplotype analysis identified superior combinations of fiber quality-associated genomic regions with high trait values (UHML = 32.34 mm; FS = 32.73 g tex-1; FE = 6.75%). Genomic analyses of traits, haplotype combinations and candidate gene information described in the current study could help leverage genetic diversity for targeted genetic improvement and gene discovery for fiber quality traits in cotton.

Quantitative genomics-enabled selection for simultaneous improvement of lint yield and seed traits in cotton (Gossypium hirsutum L.).

KEY MESSAGE: A Bayesian linkage disequilibrium-based multiple-locus mixed model identified QTLs for fibre, seed and oil traits and predicted breeding worthiness of test lines, enabling their simultaneous improvement in cotton. Improving cotton seed and oil yields has become increasingly important while continuing to breed for higher lint yield. In this study, a novel Bayesian linkage disequilibrium-based multiple-locus mixed model was developed for QTL identification and genomic prediction (GP). A multi-parent population consisting of 256 recombinant inbred lines, derived from four elite cultivars with distinct combinations of traits, was used in the analysis of QTLs for lint percentage, seed index, lint index and seed oil content and their interrelations. All four traits were moderately heritable and correlated but with no large influence of genotype × environment interactions across multiple seasons. Seven to ten major QTLs were identified for each trait with many being adjacent or overlapping for different trait pairs. A fivefold cross-validation of the model indicated prediction accuracies of 0.46-0.62. GP results based on any two-season phenotypes were strongly correlated with phenotypic means of a pooled analysis of three-season experiments (r = 0.83-0.92). When used for selection of improvement in lint, seed and oil yields, GP captured 40-100% of individuals with comparable lint yields of those selected based on the three-season phenotypic results. Thus, this quantitative genomics-enabled approach can not only decipher the genomic variation underlying lint, seed and seed oil traits and their interrelations, but can provide predictions for their simultaneous improvement. We discuss future breeding strategies in cotton that will enhance the entire value of the crop, not just its fibre.

A Life Cycle Assessment of Reusable and Disposable Surgical Caps.

INTRODUCTION: Surgical cap attire plays an important role in creating a safe and sterile environment in procedural suites, thus the choice of reusable versus disposable caps has become an issue of much debate. Given the lack of evidence for differences in surgical site infection (SSI) risk between the two, selecting the cap option with a lower carbon footprint may reduce the environmental impact of surgical procedures. However, many institutions continue to recommend the use of disposable bouffant caps. METHODS: ISO-14044 guidelines were used to complete a process-based life cycle assessment to compare the environmental impact of disposable bouffant caps and reusable cotton caps, specifically focusing on CO2 equivalent (CO2e) emissions, water use and health impacts. RESULTS: Reusable cotton caps reduced CO2e emissions by 79% when compared to disposable bouffant caps (10 kg versus 49 kg CO2e) under the base model scenario with a similar reduction seen in disability-adjusted life years. However, cotton caps were found to be more water intensive than bouffant caps (67.56 L versus 12.66 L) with the majority of water use secondary to production or manufacturing. CONCLUSIONS: Reusable cotton caps have lower total lifetime CO2e emissions compared to disposable bouffant caps across multiple use scenarios. Given the lack of evidence suggesting a superior choice for surgical site infection prevention, guidelines should recommend reusable cotton caps to reduce the environmental impact of surgical procedures.

Pulmonary function assessment among conventional and organic cotton farmers exposed to pesticides in the Central-West region of Burkina Faso.

BACKGROUND: Respiratory diseases have been associated with the exposure of populations to some environmental pollutants such as pesticides. To assess effects of pesticides on farmers' respiratory health, this study aimed to evaluate the pulmonary function of cotton farmers exposed to synthetic and natural pesticides in the Central-West region of Burkina Faso. METHODS: A cross-sectional study was conducted from June to July 2022 among 281 conventional and 189 organic cotton farmers. After collecting information on pesticide use conditions, pulmonary function tests (PFTs) were performed on each farmer according to the American Thoracic Society/European Respiratory Society guidelines, in order to assess chronic respiratory effects among cotton producers. Binary logistic regression was used to assess factors associated with the occurrence of ventilatory changes. RESULTS: Both conventional and organic cotton farmers reported similar chronic respiratory symptoms in different proportions. The main reported were rhinitis (54.45% conventional vs. 34.92% organic), chest pains (41.28% conventional vs. 23.81% organic), cough (33.45% conventional, 24.34% organic), breathlessness (31.67% conventional, 4.23% organic) (p<0.05). 16.18% and 27.50% of conventional male and female cotton farmers, respectively, had a restrictive defect. Among organic cotton farmers, 15.85% and 18.69%, respectively, of males and females had a restrictive defect. Furthermore, a significant increase in the predicted average percentage of FEV1/FVC ratio was observed among organic cotton farmers after salbutamol's use (p = 0.039). The type of cultivated cotton was not associated with ventilatory changes neither in the univariate analysis, nor in the multivariate analysis. Other factors such as farmers' age, BMI and insecticides use frequency per year were also important. Farmers who used insecticides more than 6 times per season had an increased risk of developing an obstructive defect (OR = 1.603; 95%CI: 0.484-5.309) compared to those who used them 6 times or less. CONCLUSION: Chronic respiratory signs and ventilatory impairments were found among conventional and, to our knowledge, for the first time among organic cotton producers. However, these health effects were more prevalent among conventional cotton farmers than organic ones.

Development of strontium aluminate-printed nonwoven fabric from recycled cotton cellulose for smart wearable photochromic applications.

Smart photochromic and fluorescent textile refers to garments that alter their colorimetric properties in response to external light stimulus. Cotton fibers have been reported as a main resource for many textile and non-textile industries, such as automobiles, medical devices, and furniture applications. Cotton is a natural fiber that is distinguished with breathability, softness, cheapness, and highly absorbent. However, there have been growing demands to find other resources for cotton textiles at high quality and low cost for various applications, such as sensor for harmful ultraviolet radiation. Herein, we present a novel method toward luminescent and photochromic nonwoven textiles from recycled cotton waste. Using the screen-printing technology, a cotton fabric that is both photochromic and fluorescent was developed using aqueous inorganic phosphor nanoparticles (10-18 nm)-containing printing paste. Both CIE Lab color coordinates and photoluminescence spectra showed that the transparent film printed on the nonwoven fabric develops a reversible green emission (519 nm) under ultraviolet light (365 nm), even at low pigment concentration (2%) in the printing paste. Colorfastness of printed fabrics showed high durability and photostability.

Fourier Transform Infrared (FT-IR) Spectroscopy and Simple Algorithm Analysis for Rapid and Non-Destructive Assessment of Cotton Fiber Maturity and Crystallinity for Plant Mapping.

Information on boll distribution within a cotton plant is critical to evaluate the adaptation and response of cotton plants to environmental and biotic stress in cotton production. Cotton researchers have applied available conventional fiber measurements, such as the high volume instrument (HVI) and advanced fiber information system (AFIS), to map the location and the timing of boll development and distribution within plants and further to determine within-plant variability of cotton fiber properties. Both HVI and AFIS require numerous cotton bolls combined for the measurement. As an alternative approach, attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy was proposed to measure fiber maturity (MIR) and crystallinity (CIIR) of a sample as little as 0.5 mg lint. Extending fiber maturity and crystallinity measurement into a single boll for node-by-node mapping, FT-IR method might be advantageous due to less sampling amount compared with HVI and AFIS methods. Results showed that FT-IR technique enabled the evaluation of fiber MIR and CIIR at a boll level, which resulted in average MIR and CIIR values highly correlated with HVI micronaire (MIC) and AFIS maturity ratio (M). Hence, FT-IR technique possesses a good potential for a rapid and non-destructive node-by-node mapping of cotton boll maturity and crystallinity distribution.

Bio-Skin-Inspired Flexible Pressure Sensor Based on Carbonized Cotton Fabric for Human Activity Monitoring.

With the development of technology, people's demand for pressure sensors with high sensitivity and a wide working range is increasing. An effective way to achieve this goal is simulating human skin. Herein, we propose a facile, low-cost, and reproducible method for preparing a skin-like multi-layer flexible pressure sensor (MFPS) device with high sensitivity (5.51 kPa-1 from 0 to 30 kPa) and wide working pressure range (0-200 kPa) by assembling carbonized fabrics and micro-wrinkle-structured Ag@rGO electrodes layer by layer. In addition, the highly imitated skin structure also provides the device with an extremely short response time (60/90 ms) and stable durability (over 3000 cycles). Importantly, we integrated multiple sensor devices into gloves to monitor finger movements and behaviors. In summary, the skin-like MFPS device has significant potential for real-time monitoring of human activities in the field of flexible wearable electronics and human-machine interaction.

Biofunctional Textiles: Antioxidant and Antibacterial Finishings of Cotton with Propolis and Honey.

The growing activity in the textile industry has been demanding the search for new and innovative technologies to meet consumers' needs regarding more sustainable and ecological processes, with functionality receiving more attention. Bee products are known for their wide spectra of properties, including antioxidant and antibacterial activities. Propolis and honey are the most popular and used since ancient times for the most diverse applications due to their health benefits. With the increasing need for safer and more sustainable practices, the use of natural products for the functional finishing process can be a suitable alternative due to their safety and eco-friendly nature. For that, a biosolution, composed of a mixture of propolis and honey in water, was used to perform the functional finishing of cotton knits, both in the presence and in the absence of potassium alum as a chemical mordant. The fastness strength was also evaluated after three washing cycles. The antioxidant potential of the biosolution, assessed with the in vitro ABTS scavenging assay, provided textiles with the capacity to reduce more than 90% of the ABTS radical, regardless of the mordant presence and even after three washing cycles. Furthermore, biofunctional textiles decreased the growth of Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and, particularly, Staphylococcus aureus cultures after 24 h of incubation with an increase in antibacterial activity when potassium alum was used. These findings show that bee products are promising and effective alternatives to be used in the textile industry to confer antioxidant and antibacterial properties to cotton textiles, thereby enhancing human health.

Enhancing resource utilization: A novel method for effective separation of residual film and impurities in cotton fields.

This study addresses the challenge of incomplete separation of mechanically recovered residual films and impurities in cotton fields, examining their impact on resource utilization and environmental pollution. It introduces an innovative screening method that combines pneumatic force and mechanical vibration for processing crushed film residue mixtures. A double-action screening device integrating pneumatic force and a key-type vibrating screen was developed. The working characteristics of this device were analyzed to explore the dynamic characteristics and kinematic laws of the materials using theoretical analysis methods. This led to the revelation of the screening laws of residual films and impurities. Screening tests were conducted using the Central Composite Design method, considering factors such as fan outlet, fan speed, vibration frequency of the screen, and feeding amount, with the impurity-rate-in-film (Q) and film-content-in-impurity (W) as evaluation indexes. The significant influence of each factor on the indexes was determined, regression models between the test factors and indexes were established, and the effect laws of key parameters and their significant interaction terms on the indexes were interpreted. The optimal combination of working parameters for the screening device was identified through multivariable optimization methods. Validation tests under this optimal parameters combination showed that the impurity-rate-in-film was 3.08% and the film-content-in-impurity was 1.94%, with average errors between the test values and the predicted values of 3.36% and 5.98%, respectively, demonstrating the effectiveness of the proposed method. This research provides a novel method and technical reference for achieving effective separation of residual film and impurities, thereby enhancing resource utilization.

Non-Target Screening of Chemicals in Selected Cotton Products by GC/MS and Their Safety Assessment.

Cotton is used for the production of textiles, hygiene and cosmetic materials. During cultivation and technological processes, various types of substances (surfactants, softeners, lubricants, etc.) penetrate cotton, which can have a harmful effect on both the human body and the environment. The aim of this study was to analyze selected cotton products in order to identify the substances contained and to describe the potential possibilities of inducing textile contact dermatitis (CD). The impact of the identified compounds on the aquatic environment was also taken into account. Nine samples of cotton clothing and seven samples of cotton pads from various manufacturers were tested. Samples after extraction using the FUSLE (Focused Ultrasonic Liquid Extraction) technique were analyzed with GC/MS. Qualitative analysis was based on comparing mass spectra with library spectra using the following mass spectra deconvolution programs: MassHunter (Agilent), AMDIS (NIST), and PARADISE (University of Copenhagen). The parameter confirming the identification of the substance was the retention index. Through the non-target screening process, a total of 36 substances were identified, with an average AMDIS match factor of approximately 900 ("excellent match"). Analyzing the properties of the identified compounds, it can be concluded that most of them have potential properties that can cause CD, also due to the relatively high content in samples. This applies primarily to long-chain alkanes (C25-C31), saturated fatty acids, fatty alcohols (e.g., oleyl alcohol), and fatty acid amides (e.g., oleamide). However, there are not many reports describing cases of cotton CD. Information on the identified groups of compounds may be helpful in the case of unexplained sources of sensitization when the skin comes into contact with cotton materials. Some of the identified compounds are also classified as dangerous for aquatic organisms, especially if they can be released during laundering.

Sustainable Assessment of Bio-Colorant from Bakain Bark (Melia azedarach L.) for Dyeing of Cellulosic and Proteinous Fabric.

The current study proceeded to reduce the environmental hazards spreading worldwide due to synthetic dyes. To overcome these problems, eco-friendly natural dyes are introduced as alternative sources of synthetic dyes. The present study was focused on exploring the bio-colorant of the aqueous and acidic extract of the bark of Melia azedarach L. for the dyeing of both silk and cotton samples. The results of the extraction medium specified that the aqueous extract gave maximum colorant solubility and upon fabric dyeing produced higher color strength in contrast to the acidic medium. The optimization experimentation data showed that excellent color strength of silk fabric was found at 45 min dyeing time duration, in 35:1 mL dye extract, and using 2% salt (NaCl) as an exhausting agent, whereas cotton fabric showed the maximum K/S value at 60 min dyeing time, in a 45:1 mL liquor ratio, and with the use of 2% salt. Bio-mordants produce different shades on both fabrics. Bio-mordanting experiments on silk revealed that pre-mordanting with 2% turmeric and 3% pomegranate, and post-mordanting using 3% turmeric and 2% pomegranate produced a darker shade. In the case of cotton, the pre-mordanted samples with 2% turmeric and 3% pomegranate and the post-mordanted samples with 4% turmeric and 4% pomegranate gave the highest color strengths. All the mordanted samples gave excellent fastness ratings. Overall, it has been found that Bakain bark proved to be an excellent source of tannin. The result of this study showed that it could be a cost-effective and eco-friendly dye source for textile progress.

Novel insights into water-deficit-responsive mRNAs and lncRNAs during fiber development in Gossypium hirsutum.

BACKGROUND: The fiber yield and quality of cotton are greatly and periodically affected by water deficit. However, the molecular mechanism of the water deficit response in cotton fiber cells has not been fully elucidated. RESULTS: In this study, water deficit caused a significant reduction in fiber length, strength, and elongation rate but a dramatic increase in micronaire value. To explore genome-wide transcriptional changes, fibers from cotton plants subjected to water deficit (WD) and normal irrigation (NI) during fiber development were analyzed by transcriptome sequencing. Analysis showed that 3427 mRNAs and 1021 long noncoding RNAs (lncRNAs) from fibers were differentially expressed between WD and NI plants. The maximum number of differentially expressed genes (DEGs) and lncRNAs (DERs) was identified in fibers at the secondary cell wall biosynthesis stage, suggesting that this is a critical period in response to water deficit. Twelve genes in cotton fiber were differentially and persistently expressed at ≥ five time points, suggesting that these genes are involved in both fiber development and the water-deficit response and could potentially be used in breeding to improve cotton resistance to drought stress. A total of 540 DEGs were predicted to be potentially regulated by DERs by analysis of coexpression and genomic colocation, accounting for approximately 15.76% of all DEGs. Four DERs, potentially acting as target mimics for microRNAs (miRNAs), indirectly regulated their corresponding DEGs in response to water deficit. CONCLUSIONS: This work provides a comprehensive transcriptome analysis of fiber cells and a set of protein-coding genes and lncRNAs implicated in the cotton response to water deficit, significantly affecting fiber quality during the fiber development stage.

Elucidation of sequence polymorphism in fuzzless-seed cotton lines.

Most commercially produced cotton cultivars have two types of fibers on the seed coat, short fuzz and long lint. Lint fiber is used in the textile industry, while fuzz is considered an undesirable trait. Both types of fibers are believed to be controlled by the same regulators; however, their mechanisms of actions are still obscure. Cotton fiber mutants provide an excellent system to study the genes that regulate fiber development. Here we described four uncharacterized and three previously reported cotton mutants with fuzzless seed phenotypes. To evaluate whether or not the genes previously associated with fuzzless seed phenotypes have mutations we sequenced whole genomic DNA of seven mutants and wild type varieties. We identified multiple polymorphic changes among the tested genes. Non-synonymous SNPs in the coding region of the MML3-A gene was common in the six mutant lines tested in this study, showing both dominant and recessive fuzzless phenotypes. We have mapped the locus of the causative mutation for one of the uncharacterized fuzzless lines using an F2 population that originated from a cross between the dominant fuzzless mutant and a wild type. Further, we have clarified the current knowledge about the causative n2 mutations by analyzing the sequence data and previously reported mapping data. The key genes and possible mechanisms of fiber differentiation are discussed in this study.

GWAS reveals consistent QTL for drought and salt tolerance in a MAGIC population of 550 lines derived from intermating of 11 Upland cotton (Gossypium hirsutum) parents.

Cotton is grown in arid and semi-arid regions where abiotic stresses such as drought and salt are prevalent. There is a lack of studies that simultaneously address the genetic and genomic basis of tolerance to drought and salt stress. In this study, a multi-parent advanced generation inter-cross (MAGIC) population of 550 recombinant inbred lines (RILs) together with their 11 Upland cotton parents with a total of 473,516 polymorphic SNP markers was used to identify quantitative trait loci (QTL) for drought tolerance (DT) and salt tolerance (ST) at the seedling stage based on two replicated greenhouse tests. Transgressive segregation occurred in the MAGIC-RILs, indicating that tolerant and sensitive alleles recombined for tolerance to the abiotic stress during the intermating process for the population development. A total of 20 QTL were detected for DT including 13 and 7 QTL based on plant height (PH) and dry shoot weight (DSW), respectively; and 23 QTL were detected for ST including 12 and 11 QTL for PH and DSW, respectively. There were several chromosomes with QTL clusters for abiotic stress tolerance including four QTL on chromosome A13 and three QTL on A01 for DT, and four QTL on D08 and three QTL on A11 for ST. Nine QTL (21% of the 43 QTL) detected were in common between DT and ST, indicating a common genetic basis for DT and ST. The narrow chromosomal regions for most of the QTL detected in this study allowed identification of 53 candidate genes associated with responses to salt and drought stress and abiotic stimulus. The QTL identified for both DT and ST have significantly augmented the repertoire of QTL for abiotic stress tolerance that can be used for marker-assisted selection to develop cultivars with resilience to drought and/or salt and further genomic studies towards the identification of drought and salt tolerance genes in cotton.

Traces under nails in clinical forensic medicine: not just DNA.

When dealing with complex crimes such as rape and assault, every trace takes on an essential role. The hands are often the only means of defence and offence for the victim as well as a frequent area of contact with the environment; fingernails of a victim are a well-known possible source of DNA of the aggressor; nevertheless, they are more rarely treated as an area of interest for non-genetic material, particularly on living victims. The hyponychium, because of its physiological protective function, lends itself ideally to retaining different kinds of traces representative of an environment or various products and substrates that could shed light on the environment and objects involved in the event. We therefore tested how far this capability of the hyponychium could go by simulating the dynamics of contamination of the nail through scratching on different substrates (brick and mortar, painted wood, ivy leaves, cotton and woollen fabric, soil) and persistence of any contaminant at different time intervals. We have thus shown how these traces may remain in the living for up to 24 h after the event using inexpensive and non-destructive techniques such as the episcopic and optical microscope.

Micro-FTIR combined with curve fitting method to study cellulose crystallinity of developing cotton fibers.

This study aimed to use micro-FTIR with transmission mode to investigate cellulose crystallinity of developing cotton fibers. Compared with ATR-FTIR method, we found that micro-FTIR can obtain more information of cellulose inside of the developing cotton fibers, especially in high wavenumber of 2800-3000 cm-1 region. Combined with curve fitting method, a new IR crystallinity index (CI) method named wax crystallinity index (WCI) was introduced to evaluate the cellulose crystallinity in the development of cotton fibers based on the peak and area ratios of 2900 cm-1/2850 cm-1 and 2900 cm-1/2920 cm-1. The obtained WCI values demonstrated an excellent coefficient of determination with X-ray diffraction (XRD) CI method with the value up to 0.99. This study suggested that micro-FTIR was an effective technique to qualitatively analyze the crystallinity in developing cotton fibers combined with curve fitting method.

Comparative Metabolomics Analysis Reveals Sterols and Sphingolipids Play a Role in Cotton Fiber Cell Initiation.

Cotton fiber is a seed trichome that protrudes from the outer epidermis of cotton ovule on the day of anthesis (0 day past anthesis, 0 DPA). The initial number and timing of fiber cells are closely related to fiber yield and quality. However, the mechanism underlying fiber initiation is still unclear. Here, we detected and compared the contents and compositions of sphingolipids and sterols in 0 DPA ovules of Xuzhou142 lintless-fuzzless mutants (Xufl) and Xinxiangxiaoji lintless-fuzzless mutants (Xinfl) and upland cotton wild-type Xuzhou142 (XuFL). Nine classes of sphingolipids and sixty-six sphingolipid molecular species were detected in wild-type and mutants. Compared with the wild type, the contents of Sphingosine-1-phosphate (S1P), Sphingosine (Sph), Glucosylceramide (GluCer), and Glycosyl-inositol-phospho-ceramides (GIPC) were decreased in the mutants, while the contents of Ceramide (Cer) were increased. Detail, the contents of two Cer molecular species, d18:1/22:0 and d18:1/24:0, and two Phyto-Cer molecular species, t18:0/22:0 and t18:0/h22:1 were significantly increased, while the contents of all GluCer and GIPC molecular species were decreased. Consistent with this result, the expression levels of seven genes involved in GluCer and GIPC synthesis were decreased in the mutants. Furthermore, exogenous application of a specific inhibitor of GluCer synthase, PDMP (1-phenyl-2-decanoylamino-3-morpholino-1-propanol), in ovule culture system, significantly inhibited the initiation of cotton fiber cells. In addition, five sterols and four sterol esters were detected in wild-type and mutant ovules. Compared with the wild type, the contents of total sterol were not significantly changed. While the contents of stigmasterol and campesterol were significantly increased, the contents of cholesterol were significantly decreased, and the contents of total sterol esters were significantly increased. In particular, the contents of campesterol esters and stigmasterol esters increased significantly in the two mutants. Consistently, the expression levels of some sterol synthase genes and sterol ester synthase genes were also changed in the two mutants. These results suggested that sphingolipids and sterols might have some roles in the initiation of fiber cells. Our results provided a novel insight into the regulatory mechanism of fiber cell initiation.

Effects of Water and Chemical Solutions Ageing on the Physical, Mechanical, Thermal and Flammability Properties of Natural Fibre-Reinforced Thermoplastic Composites.

Biocomposites comprising a combination of natural fibres and bio-based polymers are good alternatives to those produced from synthetic components in terms of sustainability and environmental issues. However, it is well known that water or aqueous chemical solutions affect natural polymers/fibres more than the respective synthetic components. In this study the effects of water, salt water, acidic and alkali solutions ageing on water uptake, mechanical properties and flammability of natural fibre-reinforced polypropylene (PP) and poly(lactic acid) (PLA) composites were compared. Jute, sisal and wool fibre- reinforced PP and PLA composites were prepared using a novel, patented nonwoven technology followed by the hot press method. The prepared composites were aged in water and chemical solutions for up to 3 week periods. Water absorption, flexural properties and the thermal and flammability performances of the composites were investigated before and after ageing each process. The effect of post-ageing drying on the retention of mechanical and flammability properties has also been studied. A linear relationship between irreversible flexural modulus reduction and water adsorption/desorption was observed. The aqueous chemical solutions caused further but minor effects in terms of moisture sorption and flexural modulus changes. PLA composites were affected more than the respective PP composites, because of their hydrolytic sensitivity. From thermal analytical results, these changes in PP composites could be attributed to ageing effects on fibres, whereas in PLA composite changes related to both those of fibres present and of the polymer. Ageing however, had no adverse effect on the flammability of the composites.

Enhanced Conductivity and Antibacterial Behavior of Cotton via the Electroless Deposition of Silver.

In this study, the surface-initiated atom transfer radical polymerization (SI-ATRP) technique and electroless deposition of silver (Ag) were used to prepare a novel multi-functional cotton (Cotton-Ag), possessing both conductive and antibacterial behaviors. It was found that the optimal electroless deposition time was 20 min for a weight gain of 40.4%. The physical and chemical properties of Cotton-Ag were investigated. It was found that Cotton-Ag was conductive and showed much lower electrical resistance, compared to the pristine cotton. The antibacterial properties of Cotton-Ag were also explored, and high antibacterial activity against both Escherichia coli and Staphylococcus aureus was observed.