Expression and characterization of l-arabinose isomerase from Geobacillus stearothermophilus for improved activity under acidic condition.

A low-calorie sugar-substituting sweetener, d-tagatose, can be produced by l-arabinose isomerase (l-AI) from the substrate d-galactose. However, this process suffers from a Maillard reaction when performed at alkaline pH and high temperature. For industrial applications, therefore, a reaction under slightly acidic conditions is desirable to minimize the Maillard reaction. Previously, we obtained a mutant of l-AI, H18T, from Geobacillus stearothermophilus with greater substrate specificity. Although H18T possessed excellent thermostability, its activity under acidic conditions was not optimal. Here, we successfully obtained a potential variant of the H18T protein, H18T-Y234C, which achieved improved activity at pH 6.0, based on random mutagenesis using error-prone PCR around the binding pocket area of H18T. This double H18T-Y234C mutant possessed 1.8-fold and 3-fold higher activity at pH 6.0 than the parent H18T and the wild type, thereby broadening the optimal pH range to 6.0-8.0. Mutation from Tyr to Cys at residue 234 had little effect on the secondary structure of L-AI. Furthermore, the formation of disulfide bonds was not detected. Thus, the improvement of activity at pH 6.0 is probably caused by the change in the binding pocket area involving residue 234. This study offers insight into the importance of residue 234 in improving the activity under acidic conditions.

Beet molasses-based feeding strategy enhances recombinant thermostable glucose isomerase production by Escherichia coli BL21 (DE3).

The aim of this work was to develop an effective fed-batch feeding strategy to enhance recombinant glucose isomerase (r-GI) production by recombinant Escherichia coli BL21 (DE3) pLysS on an industrially relevant feedstock without the application of an exogenous inducer. Following the batch operation (0 < t < 7 H), the effects of pulse and/or continuous feeding of hydrolyzed beet molasses were investigated under five different feeding strategies. The two most promising strategies with respect to r-GI activity were (i) PM-0.05, designed with one pulse feed (t = 7 H) followed by a continuous feed and (ii) 2PMF -0.05, designed with two consecutive pulse feeds (t = 7 and 10 H) followed by a continuous feed. The continuous feeding of molasses for both fermentation strategies employed the same precalculated feeding rate, µo = 0.05 H-1 . The maximum r-GI activities exhibited by PM-0.05 and 2PMF -0.05 were 29,050 and 30,642 U dm-3 , respectively. On the one hand, compared to PM-0.05 r-GI activity reached its maximum within a shorter cultivation time (∆tmax = 2 H) at 2PMF -0.05, which could be preferable in terms of manufacturing costs and possible risks; on the other hand, PM-0.05 is a simpler fermentation regime compared to 2PMF -0.05 with respect to manipulations that should be considered in large-scale production.

Engineered xylose utilization enhances bio-products productivity in the cyanobacterium Synechocystis sp. PCC 6803.

Hydrolysis of plant biomass generates a mixture of simple sugars that is particularly rich in glucose and xylose. Fermentation of the released sugars emits CO2 as byproduct due to metabolic inefficiencies. Therefore, the ability of a microbe to simultaneously convert biomass sugars and photosynthetically fix CO2 into target products is very desirable. In this work, the cyanobacterium, Synechocystis 6803, was engineered to grow on xylose in addition to glucose. Both the xylA (xylose isomerase) and xylB (xylulokinase) genes from Escherichia coli were required to confer xylose utilization, but a xylose-specific transporter was not required. Introduction of xylAB into an ethylene-producing strain increased the rate of ethylene production in the presence of xylose. Additionally, introduction of xylAB into a glycogen-synthesis mutant enhanced production of keto acids. Isotopic tracer studies found that nearly half of the carbon in the excreted keto acids was derived from the engineered xylose metabolism, while the remainder was derived from CO2 fixation.

Codon optimization of xylA gene for recombinant glucose isomerase production in Pichia pastoris and fed-batch feeding strategies to fine-tune bioreactor performance.

The objectives of this work are the optimization of the codons of xylA gene from Thermus thermophilus to enhance the production of recombinant glucose isomerase (rGI) in P. pastoris and to investigate the effects of feeding strategies on rGI production. Codons of xylA gene from T. thermophilus were optimized, ca. 30 % of the codons were replaced with those with higher frequencies according to the codon usage bias of P. pastoris, codon optimization resulted in a 2.4-fold higher rGI activity. To fine-tune bioreactor performance, fed-batch bioreactor feeding strategies were designed as continuous exponential methanol feeding with pre-calculated feeding rate based on the pre-determined specific growth rate, and fed-batch methanol-stat feeding. Six feeding strategies were designed, as follows: (S1) continuous exponential methanol- and pulse- sorbitol feeding; (S2) continuous exponential methanol- and peptone- feeding; (S3) continuous exponential methanol- and pulse- mannitol feeding; (S4) continuous exponential methanol- and peptone- feeding and pulse-mannitol feeding; (S5) methanol-stat feeding by keeping methanol concentration at 5 g L(-1); and, (S6) methanol-stat feeding by keeping methanol concentration at 5 g L(-1) and pulse-mannitol feeding. The highest cell and rGI activity was attained as 117 g L(-1) at t = 66 h and 32530 U L(-1) at t = 53 h, in strategy-S5. The use of the co-substrate mannitol does not increase the rGI activity in methanol-stat feeding, where 4.1-fold lower rGI activity was obtained in strategy-S6. The overall cell yield on total substrate was determined at t = 53 h as 0.21 g g(-1) in S5 strategy.

Increased accumulation of the cardio-cerebrovascular disease treatment drug tanshinone in Salvia miltiorrhiza hairy roots by the enzymes 3-hydroxy-3-methylglutaryl CoA reductase and 1-deoxy-D-xylulose 5-phosphate reductoisomerase.

Tanshinone is widely used for treatment of cardio-cerebrovascular diseases with increasing demand. Herein, key enzyme genes SmHMGR (3-hydroxy-3-methylglutaryl CoA reductase) and SmDXR (1-deoxy-D-xylulose 5-phosphate reductoisomerase) involved in the tanshinone biosynthetic pathway were introduced into Salvia miltiorrhiza (Sm) hairy roots to enhance tanshinone production. Over-expression of SmHMGR or SmDXR in hairy root lines can significantly enhance the yield of tanshinone. Transgenic hairy root lines co-expressing HMGR and DXR (HD lines) produced evidently higher levels of total tanshinone (TT) compared with the control and single gene transformed lines. The highest tanshinone production was observed in HD42 with the concentration of 3.25 mg g(-1) DW. Furthermore, the transgenic hairy roots showed higher antioxidant activity than control. In addition, transgenic hairy root harboring HMGR and DXR (HD42) exhibited higher tanshinone content after elicitation by yeast extract and/or Ag(+) than before. Tanshinone can be significantly enhanced to 5.858, 6.716, and 4.426 mg g(-1) DW by YE, Ag(+), and YE-Ag(+) treatment compared with non-induced HD42, respectively. The content of cryptotanshinone and dihydrotanshinone was effectively elevated upon elicitor treatments, whereas there was no obvious promotion effect for the other two compounds tanshinone I and tanshinone IIA. Our results provide a useful strategy to improve tanshinone content as well as other natural active products by combination of genetic engineering with elicitors.

Heterologous expression and biochemical characterization of glucose isomerase from Thermobifida fusca.

Glucose isomerase (GIase) catalyzes the isomerization of D-glucose to D-fructose. The GIase from Thermobifida fusca WSH03-11 was expressed in Escherichia coli BL21(DE3), and the purified enzyme took the form of a tetramer in solution and displayed a pI value of 5.05. The temperature optimum of GIase was 80 °C and its half life was about 2 h at 80 °C or 15 h at 70 °C. The pH optimum of GIase was 10 and the enzyme retained 95 % activity over the pH range of 5-10 after incubating at 4 °C for 24 h. Kinetic studies showed that the K m and K cat values of the enzyme are 197 mM and 1,688 min(-1), respectively. The maximum conversion yield of glucose (45 %, w/v) to fructose of the enzyme was 53 % at pH 7.5 and 70 °C. The present study provides the basis for the industrial application of recombinant T. fusca GIase in the production of high fructose syrup.

Down-regulation of cellulose synthase inhibits the formation of endocysts in Acanthamoeba.

Acanthamoeba cysts are resistant to unfavorable physiological conditions and various disinfectants. Acanthamoeba cysts have 2 walls containing various sugar moieties, and in particular, one third of the inner wall is composed of cellulose. In this study, it has been shown that down-regulation of cellulose synthase by small interfering RNA (siRNA) significantly inhibits the formation of mature Acanthamoeba castellanii cysts. Calcofluor white staining and transmission electron microscopy revealed that siRNA transfected amoeba failed to form an inner wall during encystation and thus are likely to be more vulnerable. In addition, the expression of xylose isomerase, which is involved in cyst wall formation, was not altered in cellulose synthase down-regulated amoeba, indicating that cellulose synthase is a crucial factor for inner wall formation by Acanthamoeba during encystation.

Significantly enhanced production of isoprene by ordered coexpression of genes dxs, dxr, and idi in Escherichia coli.

We constructed a biosynthetic pathway of isoprene production in Escherichia coli by introducing isoprene synthase (ispS) from Populus alba. 1-deoxy-D-xylulose 5-phosphate synthase (dxs), 1-deoxy-D-xylulose 5-phosphate reductoisomerase (dxr) and isopentenyl diphosphate (IPP) isomerase (idi) were overexpressed to enhance the isoprene production. The isoprene production was improved 0.65, 0.16, and 1.22 fold over the recombinant BL21 (pET-30a-ispS), respectively, and idi was found to be a key regulating point for isoprene production. In order to optimize the production of isoprene in E. coli, we attempted to construct polycistronic operons based on pET-30a with genes dxs, dxr, and idi in various orders. The highest isoprene production yield of 2.727 mg g(-1) h(-1) (per dry weight) was achieved by E. coli transformed with pET-30a-dxs/dxr/idi. Interestingly, the gene order was found to be consistent with that of the metabolic pathway. This indicates that order of genes is a significant concern in metabolic engineering and a sequential expression pattern can be optimized according to the biosynthetic pathway for efficient product synthesis.

Thermophilic Thermotoga maritima ribose-5-phosphate isomerase RpiB: optimized heat treatment purification and basic characterization.

The open reading frame TM1080 from Thermotoga maritima encoding ribose-5-phosphate isomerase type B (RpiB) was cloned and over-expressed in Escherichia coli BL21 (DE3). After optimization of cell culture conditions, more than 30% of intracellular proteins were soluble recombinant RpiB. High-purity RpiB was obtained by heat pretreatment through its optimization in buffer choice, buffer pH, as well as temperature and duration of pretreatment. This enzyme had the maximum activity at 70°C and pH 6.5-8.0. Under its suboptimal conditions (60°C and pH 7.0), k(cat) and K(m) values were 540s(-1) and 7.6mM, respectively; it had a half lifetime of 71h, resulting in its turn-over number of more than 2×10(8)mol of product per mol of enzyme. This study suggests that it is highly feasible to discover thermostable enzymes from exploding genomic DNA database of extremophiles with the desired stability suitable for in vitro synthetic biology projects and produce high-purity thermoenzymes at very low costs.

Styrene biosynthesis from glucose by engineered E. coli.

Styrene is a large volume, commodity petrochemical with diverse commercial applications, including as a monomer building-block for the synthesis of many useful polymers. Here we demonstrate how, through the de novo design and development of a novel metabolic pathway, styrene can alternatively be synthesized from renewable substrates such as glucose. The conversion of endogenously synthesized l-phenylalanine to styrene was achieved by the co-expression of phenylalanine ammonia lyase and trans-cinnamate decarboxylase. Candidate isoenzymes for each step were screened from bacterial, yeast, and plant genetic sources. Finally, over-expression of PAL2 from Arabidopsis thaliana and FDC1 from Saccharomyces cerevisiae (originally classified as ferulate decarboxylase) in an l-phenylalanine over-producing Escherichia coli host led to the accumulation of up to 260 mg/L in shake flask cultures. Achievable titers already approach the styrene toxicity threshold (determined as ~300 mg/L). To the best of our knowledge, this is the first report of microbial styrene production from sustainable feedstocks.

Enhancing isoprene production by genetic modification of the 1-deoxy-d-xylulose-5-phosphate pathway in Bacillus subtilis.

To enhance the production of isoprene, a volatile 5-carbon hydrocarbon, in the Gram-positive spore-forming rod-shaped bacterium Bacillus subtilis, 1-deoxy-d-xylulose-5-phosphate synthase (Dxs) and 1-deoxy-d-xylulose-5-phosphate reductoisomerase (Dxr) were overexpressed in B. subtilis DSM 10. For the strain that overexpresses Dxs, the yield of isoprene was increased 40% over that by the wild-type strain. In the Dxr overexpression strain, the level of isoprene production was unchanged. Overexpression of Dxr together with Dxs showed an isoprene production level similar to that of the Dxs overproduction strain. The effects of external factors, such as stress factors including heat (48°C), salt (0.3 M NaCl), ethanol (1%), and oxidative (0.005% H(2)O(2)) stress, on isoprene production were further examined. Heat, salt, and H(2)O(2) induced isoprene production; ethanol inhibited isoprene production. In addition, induction and repression effects are independent of SigB, which is the general stress-responsive alternative sigma factor of Gram-positive bacteria.

Confirmation and elimination of xylose metabolism bottlenecks in glucose phosphoenolpyruvate-dependent phosphotransferase system-deficient Clostridium acetobutylicum for simultaneous utilization of glucose, xylose, and arabinose.

Efficient cofermentation of D-glucose, D-xylose, and L-arabinose, three major sugars present in lignocellulose, is a fundamental requirement for cost-effective utilization of lignocellulosic biomass. The Gram-positive anaerobic bacterium Clostridium acetobutylicum, known for its excellent capability of producing ABE (acetone, butanol, and ethanol) solvent, is limited in using lignocellulose because of inefficient pentose consumption when fermenting sugar mixtures. To overcome this substrate utilization defect, a predicted glcG gene, encoding enzyme II of the D-glucose phosphoenolpyruvate-dependent phosphotransferase system (PTS), was first disrupted in the ABE-producing model strain Clostridium acetobutylicum ATCC 824, resulting in greatly improved D-xylose and L-arabinose consumption in the presence of D-glucose. Interestingly, despite the loss of GlcG, the resulting mutant strain 824glcG fermented D-glucose as efficiently as did the parent strain. This could be attributed to residual glucose PTS activity, although an increased activity of glucose kinase suggested that non-PTS glucose uptake might also be elevated as a result of glcG disruption. Furthermore, the inherent rate-limiting steps of the D-xylose metabolic pathway were observed prior to the pentose phosphate pathway (PPP) in strain ATCC 824 and then overcome by co-overexpression of the D-xylose proton-symporter (cac1345), D-xylose isomerase (cac2610), and xylulokinase (cac2612). As a result, an engineered strain (824glcG-TBA), obtained by integrating glcG disruption and genetic overexpression of the xylose pathway, was able to efficiently coferment mixtures of D-glucose, D-xylose, and L-arabinose, reaching a 24% higher ABE solvent titer (16.06 g/liter) and a 5% higher yield (0.28 g/g) compared to those of the wild-type strain. This strain will be a promising platform host toward commercial exploitation of lignocellulose to produce solvents and biofuels.

Giardia intestinalis: expression of ubiquitin, glucosamine-6-phosphate and cyst wall protein genes during the encystment process.

UNLABELLED: We determined the relative expression of ubiquitin (ub), glucosamine-6-phosphate-isomerase (gn6pi) and cyst wall protein (cwp) genes during encystment of the Portland-1 and Portland-1R strains of Giardia intestinalis. Encystment was induced with bile for different time periods. The presence of encystment-specific vesicles (ESVs) and the relative expression of genes (log(10)ΔRn) were determined by transmission electron microscopy and real-time PCR, respectively. Our results demonstrated the gene expression and the presence of ESVs after 6h of encystment. Values of cwp2 gene expression increased by 591-fold in strain Portland-1 and 78.2-fold in strain Portland-1R at this time point compared to values at 0h, after which values gradually decreased until reaching basal values between 8 and 18h after the encystment started. Expression of gn6pi was 43.5- and 46.3-fold higher than basal values, in Portland-1 and Portland-1R, respectively. Ub gene expression was 82.25-fold higher than its basal levels at 4h, after which expression decreased gradually until reaching basal values after 16h. CONCLUSIONS: This work showed the relationship between the presence of ESVs and encystment gene expression at 6h, and resistance to albendazole does not inhibit the encystment process. The results revealed important knowledge with implications in the control of parasite dissemination for preventing parasite transmission.

Expression, enzymatic characterization, and high-level production of glucose isomerase from Actinoplanes missouriensis CICIM B0118(A) in Escherichia coli.

High-level production of recombinant glucose isomerase (rGI) is desirable for lactulose synthesis. In this study, the xylA gene encoding glucose isomerase from Actinoplanes missouriensis CICIM B0118(A) was cloned and expressed in E. coli BL21(DE3), and high-level production was performed by optimization of the medium composition. rGI was purified from a recombinant E. coli BL21(DE3) and characterized. The optimum pH value of the purified enzyme was 8.0 and it was relatively stable within the pH range of 7.0-9.0. Its optimum temperature was around 85 degrees C, and it exhibited good thermostability when the temperature was lower than 90 degrees C. The maximum enzyme activity required the presence of both Co2+ and Mg2+, at the concentrations of 200 microM and 8 mM, respectively. With high-level expression and the simple one-step chromatographic purification of the His-tagged recombinant enzyme, this GI could be used in industrial production of lactulose as a potential economic tool.

Characterization of an L-arabinose isomerase from Bacillus subtilis.

An isolated gene from Bacillus subtilis str. 168 encoding a putative isomerase was proposed as an L-arabinose isomerase (L-AI), cloned into Escherichia coli, and its nucleotide sequence was determined. DNA sequence analysis revealed an open reading frame of 1,491 bp, capable of encoding a polypeptide of 496 amino acid residues. The gene was overexpressed in E. coli and the protein was purified using nickel-nitrilotriacetic acid chromatography. The purified enzyme showed the highest catalytic efficiency ever reported, with a k(cat) of 14,504 min(-1) and a k(cat)/K(m) of 121 min(-1) mM(-1) for L-arabinose. A homology model of B. subtilis L-AI was constructed based on the X-ray crystal structure of E. coli L-AI. Molecular dynamics simulation studies of the enzyme with the natural substrate, L-arabinose, and an analogue, D-galactose, shed light on the unique substrate specificity displayed by B. subtilis L-AI only towards L-arabinose. Although L-AIs have been characterized from several other sources, B. subtilis L-AI is distinguished from other L-AIs by its high substrate specificity and catalytic efficiency for L-arabinose.

Alginate immobilization of recombinant Escherichia coli whole cells harboring L-arabinose isomerase for L-ribulose production.

Recombinant Escherichia coli whole cells harboring Bacillus licheniformis L-arabinose isomerase (BLAI) were immobilized with alginate. The operational conditions for immobilization were optimized with response surface methodology. Optimal alginate concentration, Ca(2+) concentration, and cell mass loading were 1.8% (w/v), 0.1 M, and 44.5 g L(-1), respectively. The interactions between Ca(2+) concentration, alginate concentration, and initial cell mass were significant. After immobilization of BLAI, cross-linking with 0.1% glutaraldehyde significantly reduced cell leakage. The half-life of immobilized whole cells was 150 days, which was 50-fold longer than that of free cells. In seven repeated batches for L-ribulose production, the productivity was as high as 56.7 g L(-1) h(-1) at 400 g L(-1) substrate concentration. The immobilized cells retained 89% of the initial yield after 33 days of reaction. Immobilization of whole cells harboring BLAI, therefore, makes a suitable biocatalyst for the production of L-ribulose, particularly because of its high stability and low cost.

[Xylose isomerase constitutive biosynthesis in Arthrobacter nicotianae].

The specific features of biosynthesis of the cell-bound xylose isomerase by the actinobacterium Arthrobacter nicotianae BIM V-5 were studied. It was demonstrated that the constitutive synthesis of this enzyme in the studied bacteria, not subject to catabolite repression, was inhibited by xylulose, an intermediate product ofxylose utilization and the final product of its enzymatic isomerization. Short-term experiments demonstrated that xylulose at a concentration of 0.005% almost completely repressed the xylose isomerase synthesis in A. nicotianae. This effect was independent of the time moment when the repressor was added to the cultivation medium and was not associated with its influence on the catalytic activity of the enzyme.

Identification of a novel recombinant D-lyxose isomerase from Thermoprotei archaeon with high thermostable, weak-acid and nickel ion dependent properties.

Recently, production of D-mannose becomes a hotspot owing to it exhibiting many physiological functions on people's health and wide applications in food and pharmaceutical field. The use of biological enzymes to production of D-mannose is of particular receiving considerable concerns due to it possessing many merits over chemical synthesis and plant extraction strategies. D-Lyxose isomerase (D-LIase) plays a pivotal role in preparation of D-mannose from d-fructose through isomerization reaction. Thus, a novel putative D-LIase from thermophiles strain Thermoprotei archaeon which was expressed in E. coli BL21(DE3) was first identified and biochemically characterized. The recombinant D-LIase showed an optimal temperature of 80 and 85 °C and pH of 6.5. It was highly thermostable at 70 °C and 80 °C after incubating for 48 h and 33 h, respectively, with retaining over 50% of the initial activity. A lower concentration of Ni2+ (0.5 mM) could greatly increase the activity by 25-fold, which was rare reported in other D-LIases. It was a dimer structure with melting temperature of 88.3 °C. Under the optimal conditions, 15.8 g L-1 of D-mannose and 33.8 g L-1 of D-xylulose were produced from 80 g L-1 of d-fructose and D-lyxose, respectively. This work provided a promising candidate sugar isomerase T. archaeon D-LIase for the production of D-mannose and D-xylulose.

Functional expression of a bacterial xylose isomerase in Saccharomyces cerevisiae.

In industrial fermentation processes, the yeast Saccharomyces cerevisiae is commonly used for ethanol production. However, it lacks the ability to ferment pentose sugars like d-xylose and l-arabinose. Heterologous expression of a xylose isomerase (XI) would enable yeast cells to metabolize xylose. However, many attempts to express a prokaryotic XI with high activity in S. cerevisiae have failed so far. We have screened nucleic acid databases for sequences encoding putative XIs and finally were able to clone and successfully express a highly active new kind of XI from the anaerobic bacterium Clostridium phytofermentans in S. cerevisiae. Heterologous expression of this enzyme confers on the yeast cells the ability to metabolize d-xylose and to use it as the sole carbon and energy source. The new enzyme has low sequence similarities to the XIs from Piromyces sp. strain E2 and Thermus thermophilus, which were the only two XIs previously functionally expressed in S. cerevisiae. The activity and kinetic parameters of the new enzyme are comparable to those of the Piromyces XI. Importantly, the new enzyme is far less inhibited by xylitol, which accrues as a side product during xylose fermentation. Furthermore, expression of the gene could be improved by adapting its codon usage to that of the highly expressed glycolytic genes of S. cerevisiae. Expression of the bacterial XI in an industrially employed yeast strain enabled it to grow on xylose and to ferment xylose to ethanol. Thus, our findings provide an excellent starting point for further improvement of xylose fermentation in industrial yeast strains.

Integrative gene cloning and expression system for Streptomyces sp. US 24 and Streptomyces sp. TN 58 bioactive molecule producing strains.

Streptomyces sp. US 24 and Streptomyces sp. TN 58, two strains producing interesting bioactive molecules, were successfully transformed using E. coli ET12567 (pUZ8002), as a conjugal donor, carrying the integrative plasmid pSET152. For the Streptomyces sp. US 24 strain, two copies of this plasmid were tandemly integrated in the chromosome, whereas for Streptomyces sp. TN 58, the integration was in single copy at the attB site. Plasmid pSET152 was inherited every time for all analysed Streptomyces sp. US 24 and Streptomyces sp. TN 58 exconjugants under nonselective conditions. The growth, morphological differentiation, and active molecules production of all studied pSET152 integrated exconjugants were identical to those of wild type strains. Consequently, conjugal transfer using pSET152 integration system is a suitable means of genes transfer and expression for both studied strains. To validate the above gene transfer system, the glucose isomerase gene (xylA) from Streptomyces sp. SK was expressed in strain Streptomyces sp. TN 58. Obtained results indicated that heterologous glucose isomerase could be expressed and folded effectively. Glucose isomerase activity of the constructed TN 58 recombinant strain is of about eighteenfold higher than that of the Streptomyces sp. SK strain. Such results are certainly of importance due to the potential use of improved strains in biotechnological process for the production of high-fructose syrup from starch.