Synthesis of functionalized mesoporous silica nanoparticles for colorimetric and fluorescence sensing of selective metal (Fe3+) ions in aqueous solution.

The fabrication of red fluorescent hybrid mesoporous silica-based nanosensor materials has promised the bioimaging and selective detection of toxic pollutants in aqueous solutions. In this study, we present a hybrid mesoporous silica nanosensor in which the propidium iodide (PI) was used to conveniently integrate into the mesopore walls using bis(trimethoxysilylpropyl silane) precursors. Various characterization techniques including X-ray diffraction (XRD), Fourier-transform infrared (FTIR), N2 adsorption-desorption, zeta potential, particle size analysis, thermogravimetric, and UV-visible analysis were used to analyze the prepared materials. The prepared PI integrated mesoporous silica nanoparticles (PI-MSNs) selective metal ion sensing capabilities were tested with a variety of heavy metal ions (100 mM), including Ni2+, Cd2+, Co2+, Zn2+, Cr3+, Cu2+, Al3+, Mg2+, Hg2+ and Fe3+ ions. Among the investigated metal ions, the prepared PI-MSNs demonstrated selective monitoring of Fe3+ ions with a significant visible colorimetric pink color change into orange and quenching of pink fluorescence in an aqueous suspension. The selective sensing behavior of PI-MSNs might be due to the interaction of Fe3+ ions with the integrated PI functional fluorophore present in the mesopore walls. Therefore, we emphasize that the prepared PI-MSNs could be efficient for selective monitoring of Fe3+ ions in an aqueous solution and in the biological cellular microenvironment.

Serpentine environment prevails over geographic distribution in shaping the genetic diversity of Medicago lupulina L.

Edaphic conditions of serpentine soils, naturally rich in heavy metals, act as a strong selection pressure that shapes specific metal-tolerant ecotypes. Medicago lupulina L. (black medick) is not only a widespread plant species that prefers calcareous and dry soil types but also grows at the borders of serpentine formations. It can also be found in waste and disturbed habitats. This is a species with reported phytoremediation potential, however, there is no published data regarding the impact of the environment on the genetic distribution of this species. The aim of our research was to explore how selection pressure of serpentine soils affects genetic diversity of M. lupulina and to test heavy-metal accumulation capacity of this species. Specimens of 11 M. lupulina populations were collected from serpentine outcrops located in Central and Eastern Bosnia as well as from non-serpentine sites. Soil and plant samples were analyzed for the total contents of heavy metals using air-acetylene flame atomic absorption spectroscopy. Genetic diversity was analyzed using AFLP (Amplified Fragment Length Polymorphism) markers. Serpentine soils showed high nickel, cobalt, chromium and iron concentrations. Nickel and manganese concentrations in soil samples and plant material showed statistically significant correlation. Although plants in two populations show the ability to extract Ni, M. lupulina does not show hyperaccumulating properties. Despite severe selective pressure, genetic diversity in serpentine populations is not reduced. Analyses of intrapopulation and interpopulation genetic diversity showed significant genetic differentiation among populations which is not related to their geographic distance. Population from non-metalliferous soil showed clear separation from all other populations. Diversity data suggest that serpentine populations maintain genetic diversity by undetected mechanisms and that edaphic factors rather than geography influence genetic structure analyzed M. lupulina populations.

Competition of Cd(II) and Pb(II) on the bacterial cells: a new insight from bioaccumulation based on NanoSIMS imaging.

Polymetallic exposure causes complex toxicity to microorganisms. In this study, we investigated the responses of Escherichia coli under co-existence of cadmium (Cd) and lead (Pb), primarily based on biochemical analysis and RNA sequencing. Cd completely inhibited bacterial growth at a concentration of 2.41 mmol/L, with its removal rate as low as <10%. In contrast, the Pb removal rate was >95% under equimolar sole Pb stress. In addition, the Raman analysis confirmed the loss of proteins for the bacterial cells. Under the co-existence of Cd and Pb, the Cd toxicity to E. coli was alleviated. Meanwhile, the biosorption of Pb cations was more intense during the competitive sorption with Cd. Transmission electron microscopy images showed that a few cells were elongated during incubation, i.e., the average cellular length increased from 1.535 ± 0.407 to 1.845 ± 0.620 µm. Moreover, NanoSIMS imaging showed that the intracellular distribution of Cd and Pb was coupled with sulfur. Genes regulating sulfate transporter were also upregulated to promote sulfate assimilation. Then, the subsequent production of biogenic sulfide and sulfur-containing amino acids was enhanced. Although this strategy based on S enrichment could resist the polymetallic stress, not all related genes were induced to upregulate under sole Cd stress. Therefore, the S metabolism might remodel the microbial resistance to variable occurrence of heavy metals. Furthermore, the competitive sorption (in contrast to sole Cd stress) could prevent microbial cells from strong Cd toxicity.IMPORTANCEMicrobial tolerance and resistance to heavy metals have been widely studied under stress of single metals. However, the polymetallic exposure seems to prevail in the environment. Though microbial resistance can alleviate the effects of exogenous stress, the taxonomic or functional response to polymetallic exposure is still not fully understood. We determined the strong cytotoxicity of cadmium (Cd) on growth, and cell elongation would be driven by Cd stress. The addition of appropriate lead (Pb) showed a stimulating effect on microbial bioactivity. Meanwhile, the biosorption of Pb was more intense during co-existence of Pb and Cd. Our work also revealed the spatial coupling of intracellular S and Cd/Pb. In particular, the S assimilation was promoted by Pb stress. This work elucidated the microbial responses to polymetallic exposure and may provide new insights into the antagonistic function during metal stresses.

Flexible electronics for heavy metal ion detection in water: a comprehensive review.

Flexible electronics offer a versatile, rapid, cost-effective and portable solution to monitor water contamination, which poses serious threat to the environment and human health. This review paper presents a comprehensive exploration of the versatile platforms of flexible electronics in the context of heavy metal ion detection in water systems. The review overviews of the fundamental principles of heavy metal ion detection, surveys the state-of-the-art materials and fabrication techniques for flexible sensors, analyses key performance metrics and limitations, and discusses future opportunities and challenges. By highlighting recent advances in nanomaterials, polymers, wireless integration, and sustainability, this review aims to serve as an essential resource for researchers, engineers, and policy makers seeking to address the critical challenge of heavy metal contamination in water resources. The versatile promise of flexible electronics is thoroughly elucidated to inspire continued innovation in this emerging technology arena.

Bioremediation of petroleum refinery wastewater using Bacillus subtilis IH-1 and assessment of its toxicity.

Environmental contamination from petroleum refinery operations has increased due to the rapid population growth and modernization of society, necessitating urgent repair. Microbial remediation of petroleum wastewater by prominent bacterial cultures holds promise in circumventing the issue of petroleum-related pollution. Herein, the bacterial culture was isolated from petroleum-contaminated sludge samples for the valorization of polyaromatic hydrocarbons and biodegradation of petroleum wastewater samples. The bacterial strain was screened and identified as Bacillus subtilis IH-1. After six days of incubation, the bacteria had degraded 25.9% of phenanthrene and 20.3% of naphthalene. The treatment of wastewater samples was assessed using physico-chemical and Fourier-transform infrared spectroscopy analysis, which revealed that the level of pollutants was elevated and above the allowed limits. Following bacterial degradation, the reduction in pollution parameters viz. EC (82.7%), BOD (87.0%), COD (80.0%), total phenols (96.3%), oil and grease (79.7%), TKN (68.8%), TOC (96.3%) and TPH (52.4%) were observed. The reduction in pH and heavy metals were also observed after bacterial treatment. V. mungo was used in the phytotoxicity test, which revealed at 50% wastewater concentration the reduction in biomass (30.3%), root length (87.7%), shoot length (93.9%), and seed germination (30.0%) was observed in comparison to control. When A. cepa root tips immersed in varying concentrations of wastewater samples, the mitotic index significantly decreased, suggesting the induction of cytotoxicity. However, following the bacterial treatment, there was a noticeable decrease in phytotoxicity and cytotoxicity. The bacterial culture produces lignin peroxidase enzyme and has the potential to degrade the toxic pollutants of petroleum wastewater. Therefore the bacterium may be immobilised or directly used at reactor scale or pilot scale study to benefit the industry and environmental safety.

Plant growth-promoting bacteria isolated from earthworms enhance spinach growth and its phytoremediation potential in metal-contaminated soils.

The aim of this study was to evaluate the impact of metal-tolerant plant growth-promoting bacteria (PGPB) isolated from the chloragogenous tissue of Aporrectodea molleri, which represents a unique habitat. Our objectives were to investigate their effects on the growth of Spinacia oleracea under heavy metal stress and assess their potential for enhancing phytoremediation capabilities. The experiment was conducted in an alkaline soil contaminated with 7 mg kg-1 of cadmium, 100 mg kg-1 of nickel, 150 mg kg-1 of copper, 300 mg kg-1 of Zinc, and mg kg-1 of 600 Manganese. The results showed that heavy metal stress considerably diminished root (42.8%) and shoot length (60.1%), biomass (80%), chlorophyll content (41%), soil alkaline (45%), and acid (51%) phosphatases (42%) and urease (42%). However, soil inoculation with bacterial isolates remarkably improved plant growth. Soil bioaugmentation increased spinach growth (up to 74.5% for root length, up to 106.3% for shoot length, and up to 5.5 folds for fresh biomass) while significantly increasing soil enzyme activity and NPK content. Multivariate data analysis indicated that soil inoculation with Bacillus circulans TC7 promoted plant growth while limiting metal bioaccumulation, whereas Pseudomonas sp. TC33 and Bacillus subtilis TC34 increased metal bioaccumulation in spinach tissues while minimizing their toxicity. Our study confirms that earthworms are a reservoir of multi-beneficial bacteria that can effectively improve phytoremediation efficiency and mitigate the toxic effects of heavy metals on plant growth. Further studies are needed to investigate the long-term effects and feasibility of using these isolates as a consortium in field applications.

Preparation of ceramsite using solid residue from anaerobic digestion of waste activated sludge and its enhancing effect on catalytic ozonation.

Anaerobic digestion is an environmentally friendly method for reclaiming waste activated sludge. However, it cannot be overlooked that the solid residue generated from this process can still pose environmental risks and impose economic pressure on society. To mitigate and recycle the solid residue, this study utilized it as a primary raw material for manufacturing ceramsite with potential applications in wastewater treatment. The optimal ratio of solid residue to fly ash was demonstrated to be 6:4 with an additional 15% of clay supplementing the raw ceramsite materials. Furthermore, the optimal sintering process was established as preheating at 300 °C for 25 min followed by sintering at 1085 °C for 10 min, as determined through an L16 (44) Orthogonal test. The prepared ceramsite demonstrated advantageous performance parameters that exceeded the standards outlined in the Chinese industry standard CJ/T 299-2008 for water treatment artificial ceramsite. When utilized in an ozonation system, the ceramsite exhibited remarkable catalytic activity for phenol degradation by promoting the decomposition of molecular O3 into hydroxyl radicals. Additionally, it displayed minimal leaching of heavy metals and lower application costs. These findings emphasize its attractiveness in water and wastewater treatment processes and present a practical strategy for reclaiming this solid residue.

Green and sustainable practices for an energy plant cultivation on naturally contaminated versus spiked soils. The impact of ageing soil pollution in the circular economy framework.

Silybum marianum L. Gaertn. or milk thistle is an energy-produced weed that has been shown to be tolerant of heavy metal-contaminated soils. In the present study, its cultivation was studied in soils laboratory-spiked (artificial) with Cu and Zn solutions. Meanwhile, plant growing on naturally contaminated soils of Mediterranean regions, both urban and rural, was investigated. The metal concentrations spiked in artificial polluted soils were estimated to be roughly equivalent to those in naturally contaminated soils. Plants grown in artificially contaminated soils incorporated the metal added to the soils more rapidly and in higher proportions. The contamination of soil samples was carried out using different chemical reagents, salts containing the metals with oxidation number II, highlighting the fact that the reagent containing the metal is crucial regarding artificial soil pollution. Statistically significant differences were observed between the individual pollution patterns, as far as plant metals uptake concern. It was also found that the aged, contaminated soils transfer lower levels of metals to the plants. Therefore, aging or weathering of contamination alters toxicity levels in the soil environment by determining transport and uptake into the soil-to-plant system. Eventually, from the present research, it emerged the fact that in urban soils that have aged perennial pollution, the uptake of metals by plants is probably lower than in rural ones. Furthermore, with proper management, it is possible to grow plants, with low nutrient requirements, in urban soils by adopting smart, green and eco-friendly techniques, enhancing sustainable cultivation in the framework of circular economy.

Optimizing refuse-derived fuel production from scheduled wastes through Aspen plus simulation.

This study aims to improve the quality of fuel with high calorific value namely Sfuel - a commercial high-quality refuse-derived fuel (RDF) from hazardous waste via modifying the process design and operating parameters of thermal conversion process. The study analyses key parameters of RDF quality, such as calorific value and heavy metal content, before and after process modifications based on the combination of experimental and simulation using Aspen Plus. In this study, the temperature and pressure of the simulation system are varied from 100 to 700 °C and from 1 to 5 bar, respectively. Findings indicate that there are a total of eleven heavy metals and 179 volatile compounds in the "Sfuels". The quality of the targeted product is greatly improved by the metal evaporation at high temperatures and pressures. However, the calorific value of RDF significantly decreases at 700 °C due to a large amount of the carbon content being evaporated. Although the carbon content at high temperatures is significantly lost, the heat from the vapour stream reactor outlet, which is reused to preheat the nitrogen gas stream supplied to the system, reduces energy consumption while improving the thermal conversion efficiency of the system. Besides, low pressure along with high temperature are not the optimal conditions for quality Sfuels improvement by thermal conversion. Results also indicate that electric heating is more economically efficient than natural gas heating.

Properties of biochar colloids and behaviors in the soil environment: Influencing the migration of heavy metals.

Biochar pyrolyzed by biomass shows excellent application prospects for heavy metal (HM) remediation, but a part of biochar can be inevitably broken into micro- and nano-sized biochar colloids (BCs) under biological and physicochemical actions in soil. BCs derived in the process of remediation have rough surface, rich elemental species and contents, and multiple functional groups, which are similar to biochar. However, BCs have some unique colloidal properties because of their micro and nano scale size. Due to these properties, BCs exhibit strong mobilities in the soil environment, and the mobilities may be influenced by a combination of colloidal properties of BCs and environmental factors including soil colloids and other soil environmental conditions. In addition, BCs may have affinity effects on HMs through electrostatic adsorption, ion exchange, surface complexation, precipitation/co-precipitation, and redox because of the properties such as large specific surface area, and rich oxygen-containing functional groups and minerals on the surface. This review summarizes the physicochemical and migratory properties of BCs, and the internal and external factors affecting the migration of BCs in the soil environment, and the possible effects of BCs on HMs are high-lighted. This review provides a theoretical basis for the optimization of soil contaminated with HMs after remediation using biochar. Notably, the innovative idea that BCs may influence the presence of HMs in soil needs to be further confirmed by more targeted detection and analysis methods in future studies to prevent the possible environmental toxicities of the lateral and vertical diffusion of HM caused by BCs in soil.

Conversion of seaweed waste to biochar for the removal of heavy metal ions from aqueous solution: A sustainable method to address eutrophication problem in water bodies.

The present study investigated the sustainable approach for wastewater treatment using waste algal blooms. The current study investigated the removal of toxic metals namely chromium (Cr), nickel (Ni), and zinc (Zn) from aqueous solutions in batch and column studies using biochar produced by the marine algae Ulva reticulata. SEM/EDX, FTIR, and XRD were used to examine the adsorbents' properties and stability. The removal efficiency of toxic metals in batch operations was investigated by varying the parameters, which included pH, biochar dose, initial metal ion concentration, and contact time. Similarly, in the column study, the removal efficiency of heavy metal ions was investigated by varying bed height, flow rate, and initial metal ion concentration. Response Surface Methodology (Central Composite Design (CCD)) was used to confirm the linearity between the observed and estimated values of the adsorption quantity. The packed bed column demonstrated successful removal rates of 90.38% for Cr, 91.23% for Ni, and 89.92% for Zn heavy metals from aqueous solutions, under a controlled environment. The breakthrough analysis also shows that the Thomas and Adams-Bohart models best fit the regression values, allowing prior breakthroughs in the packed bed column to be predicted. Desorption studies were conducted to understand sorption and elution during different regeneration cycles. Adding 0.3 N sulfuric acid over 40 min resulted in the highest desorption rate of the column and adsorbent used for all three metal ions.

Biomonitoring of heavy metals and their phytoremediation by duckweeds: Advances and prospects.

Heavy metals (HMs) contamination of water bodies severely threatens human and ecosystem health. There is growing interest in the use of duckweeds for HMs biomonitoring and phytoremediation due to their fast growth, low cultivation costs, and excellent HM uptake efficiency. In this review, we summarize the current state of knowledge on duckweeds and their suitability for HM biomonitoring and phytoremediation. Duckweeds have been used for phytotoxicity assays since the 1930s. Some toxicity tests based on duckweeds have been listed in international guidelines. Duckweeds have also been recognized for their ability to facilitate HM phytoremediation in aquatic environments. Large-scale screening of duckweed germplasm optimized for HM biomonitoring and phytoremediation is still essential. We further discuss the morphological, physiological, and molecular effects of HMs on duckweeds. However, the existing data are clearly insufficient, especially in regard to dissection of the transcriptome, metabolome, proteome responses and molecular mechanisms of duckweeds under HM stresses. We also evaluate the influence of environmental factors, exogenous substances, duckweed community composition, and HM interactions on their HM sensitivity and HM accumulation, which need to be considered in practical application scenarios. Finally, we identify challenges and propose approaches for improving the effectiveness of duckweeds for bioremediation from the aspects of selection of duckweed strain, cultivation optimization, engineered duckweeds. We foresee great promise for duckweeds as phytoremediation agents, providing environmentally safe and economically efficient means for HM removal. However, the primary limiting issue is that so few researchers have recognized the outstanding advantages of duckweeds. We hope that this review can pique the interest and attention of more researchers.

Bycatch and pollution are the main threats for Burmeister's porpoises inhabiting a high-industrialized bay in the Humboldt Current System.

Pollution and bycatch are two of the main threats for cetaceans worldwide. These threats are exacerbated for nearshore species particularly for those in regions with intense industrial and fishing activities. Burmeister's porpoise is endemic to South America, has a Near Threatened conservation status because of long-term mortality in fisheries. Burmeister's porpoise occur in Mejillones Bay, northern Chile, a hot spot for heavy metals pollution from the mining industry and an intense industrial and artisanal purse-seine fishing area. From 2018 to 2021, we conducted systematic marine surveys to assess the abundance, distribution and habitat use of Burmeister's porpoises. We responded to stranding reports from 2018 to 2022, and necropsied nine individuals. From five of these, we analyzed the metal concentrations (As, Cd, Cr, Cu, Pb, Hg, Se and Zn) in muscle and skin tissues. Results showed an abundance of 76.17 individuals (CV = 25.9%) and an average density of 0.45 individuals/km2 (CV = 26%). Burmeister's porpoises were observed year round, 22.2% were mother-calf pairs present in austral summer at an average of 90.6 m depth in the southwestern bound of the bay. Two-thirds of stranded specimens died due to bycatch and one died due to bottlenose dolphin (Tursiops truncatus) attack. We report a dead Burmeister's porpoise positive for avian flu virus A (H5N1). Metals analyzed were found in muscle and skin tissues of stranded Burmeister's porpoises in the following order (Zn > Cu > Cr > As > Hg > Pb > Cd). Although we could not assess pollution as a cause of mortality, Cr, As and Pb concentrations exceeded the concentrations found in other porpoises species worldwide. We conclude that bycatch and pollution as the main threats for Burmeister's porpoise survival in northern Chile. Future studies should investigate the use of acoustic deterrent alarms to mitigate the bycatch in the bay and consider the Burmeister's porpoise as a sentinel species of pollution in northern Chilean coast.

Accumulation of typical persistent organic pollutants and heavy metals in bioretention facilities: Distribution, risk assessment, and microbial community impact.

Bioretention facilities have proven highly effective in removing pollutants from runoff. However, there is a concerning paucity of research on the contamination characteristics and associated risks posed by refractory pollutants in these facilities following long-term operation. This research focuses on the distribution, sources, microbial community impact, and human health risks of pollutants in eight bioretention facilities that have been operational for 5-11 years. The results showed that the distribution of Cu, Zn, and Cd was closely related to anti-seepage measures. PAHs, PCBs, and OCPs primarily accumulated in the surface, with concentrations ranging from 7.42 to 20.34 mg/kg, 31.8-77.3 µg/kg, and 60.5-163.6 µg/kg, respectively. Their concentrations inversely correlate with the depth of the media. Although the majority of contaminants remained below their respective risk thresholds, their concentrations typically exceeded those of background soil values, indicating an enrichment phenomenon. Source analysis revealed that PAHs primarily originate from oil combustion, PCBs were linked to their related industrial products, DDTs had their main sources in technical DDx and residues from the use of dicofol, while HCHs were traced back to historical residues from agricultural activities. Microbial α-diversity (Chao 1 and Shannon) decreased by 8.3-23.4% and 0.8-4.4%, respectively, in different facilities after long-term operation. The most dominant microbial phylum in the facilities was Proteobacteria (all relative abundances >48%). The total relative abundance of dominant genera was 6.7-34.3% higher than the control site, and Pseudomonas, a typical POPs-heavy metal degrading bacterium, had the highest relative abundance (>1.2%). Cu, Zn, and Cd present no non-carcinogenic risks and have low potential ecological risks. However, the lifetime cancer risk for PAHs is 10-6 ∼10-4 in most facilities and is of concern. The cancer risk for PCBs is acceptable, while OCPs pose a low cancer risk only for children.

Anthropogenic effects on soils in the eastern Tibetan Plateau revealed by geochemical elemental characteristics.

The Tibetan Plateau (TP) constitutes a fragile and sensitive ecological environment, which is vulnerable to global climate change and human activities. To investigate the anthropogenic effects on the TP's environmental system is valuable for guiding human responses and adaptations to future environmental changes. In this study, we detailedly analyzed the geochemical elements of four representative soil sections developed on loess from Ganzi, Jinchuan, Aba, and Chuanzhusi in the eastern TP. The chemical elemental profiles distinctly indicated the presence of typical anthropogenic elements (Cu, Zn, Ni, Cr, Pb, Mn, and Fe), underscoring the substantial influence of human activities on TP soil, and showing spatial variance. Our results indicate that anthropogenic impacts were relatively low at Aba and Ganzi, resulting in a deficit of anthropogenic elements at the surface layer. Whereas at Jinchuan and Chuanzhusi, relatively intense anthropogenic impacts have led to the enrichment of anthropogenic elements in the topsoil. We infer that agricultural activities, increased traffic, and expansion of tourism activities were the major factors affecting the anthropogenic elements of TP soils. Our study highlights the impact of human activities on soil geochemical processes in the Tibetan Plateau.

Eisenia fetida-driven vermitechnology for the eco-friendly transformation of steel waste slag into organic amendment: An insight through microbial diversity and multi-model approach.

The processing of steel waste slag from the black metallurgical sector seriously threatened the ecology. To counter these dangers, appropriate detoxification methods were required. Vermitechnology was one such strategy that could successfully convert this industrial waste into nutrient-rich products suitable for use in agriculture. This research primarily focuses on employing vermitechnology for the transformation of waste steel slag into vermicompost and to determine changes in microbial composition, nutrient cycling, and metal detoxification facilitated by earthworms (Eisenia fetida). Earthworm populations in steel waste vermibeds (sw-vermibeds) increased by 2.87-3.07 folds. T1(SW + CD-1:1) comparatively showed increased levels of nutrients such as nitrogen, phosphorus, and potassium. Microbial and enzymatic parameters were more pronounced in treatment T1. The findings of phospholipid fatty acid (PLFA) diversity demonstrate microbial diversity and fatty acid composition. Based on PLFA Sobol Sensitivity Analysis (SSA), PUFA and cyclo were the most sensitive inputs to the presence of heavy metal (HMs) concentrations in SW. In accordance with Taylor-based modelling, R-tree, and Mars were the most trusted regression models for predicting HMs toxicity on microbes. The bioavailable metal fractions of HMs (Fe, Ni, Cd, Cu, Pb, and Cr) decreased by 61-83%. The correlation was performed for 0 and 90 days for metal microbial interactions r (0 days), [BSR vs Fe, Cd, Cu, Ni = -0.99, -0.82, -0.43, -0.99] and r (90 days), [FDA vs Fe, Cu, Ni = -0.97, -0.47, -0.95]. Overall, the results indicated that T1(1:1 SW + CD) provided more favorable conditions for the development of microbes and Eisenia fetida. This research presents a new perspective to the world community on the transformation of harmful steel waste slag into advantageous biological resources by introducing a novel method of employing Eisenia fetida to remediate hazardous steel waste slag.

Effects of heavy metals and metalloids on the biodegradation of organic contaminants.

Heavy metals and metalloids (HMMs) inhibit the biodegradation of organic pollutants. The degree of inhibition depends not only on the concentration and bioavailability of HMMs but also on additional factors, such as environmental variables (e.g., inorganic components, organic matter, pH, and redox potential), the nature of the metals, and microbial species. Based on the degradation pattern and metal concentrations causing half biodegradation rate reductions (RC50s), the inhibition of biodegradation was: Hg2+, As2O3 > Cu2+, Cd2+, Pb2+, Cr3+ > Ni2+, Co2+ > Mn2+, Zn2+ > Fe3+. Four patterns were observed: inhibition increases with increasing metal concentration; low concentrations stimulate, while high concentrations inhibit; high concentrations inhibit less; and mild inhibition remains constant. In addition, metal ion mixtures have more complex inhibitory effects on the degradation of organic pollutants, which may be greater than, similar to, or less than that of individual HMMs. Finally, the inhibitory mechanism of HMMs on biodegradation is reviewed. HMMs generally have little impact on the biodegradation pathway of organic pollutants for bacterial strains. However, when pollutants are biodegraded by the community, HMMs may activate microbial populations harbouring different transformation pathways. HMMs can affect the biodegradation efficiency of organic pollutants by changing the surface properties of microbes, interfering with degradative enzymes, and interacting with general metabolism.

Microbial consortium and impact of industrial mining on the Natural High Background Radiation Area (NHBRA), India - Characteristic role of primordial radionuclides in influencing the community structure and extremophiles pattern.

The present investigation is the first of its kind which aims to study the characteristics of microbial consortium inhabiting one of the natural high background radiation areas of the world, Chavara Coast in Kerala, India. The composition of the microbial community and their structural changes were evaluated under the natural circumstances with exorbitant presence of radionuclides in the sediments and after the radionuclide's recession due to mining effects. For this purpose, the concentration of radionuclides, heavy metals, net radioactivity estimation via gross alpha and beta emitters and other physiochemical characteristics were assessed in the sediments throughout the estuarine stretch. According to the results, the radionuclides had a significant effect in shaping the community structure and composition, as confirmed by the bacterial heterogeneity achieved between the samples. The results indicate that high radioactivity in the background environment reduced the abundance and growth of normal microbial fauna and favoured only the growth of certain extremophiles belonging to families of Piscirickettsiacea, Rhodobacteriacea and Thermodesulfovibrionaceae, which were able to tolerate and adapt towards the ionizing radiation present in the environment. In contrast, communities from Comamondacea, Sphingomonadacea, Moraxellacea and Erythrobacteracea were present in the sediments collected from industrial outlet, reinforcing the potent role of radionuclides in governing the community pattern of microbes present in the natural environment. The study confirms the presence of these novel and unidentified bacterial communities and further opens the possibility of utilizing their usefulness in future prospects.

Use of municipal solid waste incineration fly ash as a supplementary cementitious material: CO2 mineralization coupled with mechanochemical pretreatment.

The use of municipal solid waste incineration fly ash, commonly referred to as "fly ash", as a supplementary cementitious material (SCM), has been explored to mitigate the CO2 emissions resulting from cement production. Nevertheless, the incorporation of fly ash as an SCM in mortar has been shown to weaken its compressive strength and increase the risk of heavy metal leaching. In light of these challenges, this study aims to comprehensively evaluate the influence of CO2 pressure, temperature, and residual water/binder ratio on the CO2 uptake and compressive strength of mortar when combined with fly ash. Additionally, this study systematically examines the feasibility of mechanochemical pretreatment, which enhances the homogenization of fly ash and augments the density of the mortar's microstructure. The results indicate that the use of mechanochemical pretreatment leads to a notable 43.6% increase in 28-day compressive strength and diminishes the leaching of As, Ba, Ni, Pb, Se, and Zn by 17.9-77.8%. Finally, a reaction kinetics model is proposed to elucidate the CO2 sequestration process under varying conditions. These findings offer valuable guidance for incorporating fly ash as an SCM and CO2 sequestrator in mortar.

Spatial distribution and seasonal variation of trace hazardous elements contamination in the coastal environment.

Groundwater is the second largest water source for daily consumption, only next to surface water resources. Groundwater has been extensively investigated for its pollution level in urban areas. The groundwater quality assessments in industrial areas associated with every urban landscape are still lacking. In order to examine the spatial distribution characteristics, pollution levels, and sources of trace metals in the densely populated Chennai coastal region of Tamilnadu, India, physicochemical parameters and trace element concentrations have been determined in groundwater. 55 groundwater samples from Tamil Nadu's coastal region were collected and analyzed for physicochemical parameters such as pH, (EC), (TDS), and (TH) during the pre-monsoon (June 2015) and post-monsoon (January 2016) seasons. We used trace elements and analyzed them in this study (Mg, Zn, Pb, Ni, Co, Cu, Cr, and Fe). Furthermore, anthropogenic input from industries and power plants exacerbates the pollution of Ni, Mg, Fe, and Mn. Due to evaporites and anthropogenic input, samples with excessive salinity, total hardness, and water quality are considered unsuitable for irrigation or drinking. The results demonstrated that seasonal, geogenic, and anthropogenic influences all have a significant impact on the heterogeneous chemistry of groundwater.