Helicobacter pylori Dormant States Are Affected by Vitamin C.

Helicobacter pylori colonizes human gastric mucosa, overcoming stressful conditions and entering in a dormant state. This study evaluated: (i) H. pylori's physiological changes from active to viable-but-non-culturable (VBNC) and persister (AP) states, establishing times/conditions; (ii) the ability of vitamin C to interfere with dormancy generation/resuscitation. A dormant state was induced in clinical MDR H. pylori 10A/13 by: nutrient starvation (for VBNC generation), incubating in an unenriched medium (Brucella broth) or saline solution (SS), and (for AP generation) treatment with 10xMIC amoxicillin (AMX). The samples were monitored after 24, 48, and 72 h, 8-14 days by OD600, CFUs/mL, Live/Dead staining, and an MTT viability test. Afterwards, vitamin C was added to the H. pylori suspension before/after the generation of dormant states, and monitoring took place at 24, 48, and 72 h. The VBNC state was generated after 8 days in SS, and the AP state in AMX for 48 h. Vitamin C reduced its entry into a VBNC state. In AP cells, Vitamin C delayed entry, decreasing viable coccal cells and increasing bacillary/U-shaped bacteria. Vitamin C increased resuscitation (60%) in the VBNC state and reduced the aggregates of the AP state. Vitamin C reduced the incidence of dormant states, promoting the resuscitation rate. Pretreatment with Vitamin C could favor the selection of microbial vegetative forms that are more susceptible to H. pylori therapeutical schemes.

Biofilms in Chronic Wound Infections: Innovative Antimicrobial Approaches Using the In Vitro Lubbock Chronic Wound Biofilm Model.

Chronic wounds have harmful effects on both patients and healthcare systems. Wound chronicity is attributed to an impaired healing process due to several host and local factors that affect healing pathways. The resulting ulcers contain a wide variety of microorganisms that are mostly resistant to antimicrobials and possess the ability to form mono/poly-microbial biofilms. The search for new, effective and safe compounds to handle chronic wounds has come a long way throughout the history of medicine, which has included several studies and trials of conventional treatments. Treatments focus on fighting the microbial colonization that develops in the wound by multidrug resistant pathogens. The development of molecular medicine, especially in antibacterial agents, needs an in vitro model similar to the in vivo chronic wound environment to evaluate the efficacy of antimicrobial agents. The Lubbock chronic wound biofilm (LCWB) model is an in vitro model developed to mimic the pathogen colonization and the biofilm formation of a real chronic wound, and it is suitable to screen the antibacterial activity of innovative compounds. In this review, we focused on the characteristics of chronic wound biofilms and the contribution of the LCWB model both to the study of wound poly-microbial biofilms and as a model for novel treatment strategies.

Preliminary Air Quality and Microclimatic Conditions Study in the Santuario della Beata Vergine dei Miracoli in Saronno (VA).

In the present work, the microclimatic conditions (temperature (T), relative humidity (RH), and illuminance (I)), together with the air quality (both aerosol particulate matter (PM) and gaseous pollutants), were monitored to evaluate the environmental conditions inside the Santuario della Beata Vergine dei Miracoli in Saronno (VA), a masterpiece of the Italian Renaissance. For this purpose, dataloggers were used to carry out the T, RH, and I measurements, whereas an optical particle counter (OPC) was employed to perform the particle count and determine the concentration of the aerosol PM. Finally, diffusive passive samplers were used to determine the concentration of nitrogen dioxide (NO2) and BTEX (benzene, toluene, ethylbenzene, and xylenes). To identify possible spatial variations, the studies were conducted at different sites and different heights in the Sanctuary. Particular focus was given to the Easter week during which liturgical services attracting large numbers of people were carried out. Additionally, a comparison with the outdoor values was performed to highlight the accumulation phenomena and other variations in the concentrations of the species. Despite the indoor concentrations of pollutants and variations in the thermohygrometric parameters being generally lower compared to the outdoors (e.g., 5.2-15.0 µg m-3 versus 17.7-45.3 µg m-3 for NO2), the microclimatic conditions were often not in line with the Italian legislation and technical standards.

Antimicrobial Combined Action of Graphene Oxide and Light Emitting Diodes for Chronic Wound Management.

Innovative non-antibiotic compounds such as graphene oxide (GO) and light-emitting diodes (LEDs) may represent a valid strategy for managing chronic wound infections related to resistant pathogens. This study aimed to evaluate 630 nm LED and 880 nm LED ability to enhance the GO antimicrobial activity against Staphylococcus aureus- and Pseudomonas aeruginosa-resistant strains in a dual-species biofilm in the Lubbock chronic wound biofilm (LCWB) model. The effect of a 630 nm LED, alone or plus 5-aminolevulinic acid (ALAD)-mediated photodynamic therapy (PDT) (ALAD-PDT), or an 880 nm LED on the GO (50 mg/l) action was evaluated by determining the CFU/mg reductions, live/dead analysis, scanning electron microscope observation, and reactive oxygen species assay. Among the LCWBs, the best effect was obtained with GO irradiated with ALAD-PDT, with percentages of CFU/mg reduction up to 78.96% ± 0.21 and 95.17% ± 2.56 for S. aureus and P. aeruginosa, respectively. The microscope images showed a reduction in the cell number and viability when treated with GO + ALAD-PDT. In addition, increased ROS production was detected. No differences were recorded when GO was irradiated with an 880 nm LED versus GO alone. The obtained results suggest that treatment with GO irradiated with ALAD-PDT represents a valid, sustainable strategy to counteract the polymicrobial colonization of chronic wounds.

The impact of atmospheric pollution on outdoor cultural heritage: an analytic methodology for the characterization of the carbonaceous fraction in black crusts present on stone surfaces.

COVID-19 has reduced tourism in both museums and historical sites with negative economic effect. The wellbeing and good preservation of monuments is a key factor to encourage again tourism. Historical monuments exposed to outdoor pollution are subjected to well known degradation phenomenon including the formation on their surface of black crusts (BCs) causing blackening and deterioration of the monuments and, as a consequence, a worst fruition by the visitors. The aim of this research is the development and validation of a novel method to characterize and quantify the various components present in the black crusts. SO2 together with the carbonaceous fraction (i.e. OC, organic carbon, and EC, elemental carbon) represent the main atmospheric pollutants involved in the process of BCs formation which consists in the partial transformation of the carbonate substrate into gypsum where black particles are embedded. A new methodology based on the use of TGA/DSC (Thermogravimetric Analysis/Differential scanning calorimetry) and CHN (Carbon, Hydrogen, Nitrogen) analysis was set up allowing to determine organic carbon and elemental carbon together with other components such as gypsum. Four standard mixtures simulating BCs composition were prepared and analysed by the set-up methodology. The new procedure was subsequently applied to study real BCs samples taken from monuments and historical buildings placed in cities heavily affected by atmospheric pollution and by PCA (principal component analysis) their main features, from the point of view of carbonaceous fraction, were highlighted.

Improving indoor air quality through an air purifier able to reduce aerosol particulate matter (PM) and volatile organic compounds (VOCs): Experimental results.

The adverse effects of fine particulate matter (PM) and many volatile organic compounds (VOCs) on human health are well known. Fine particles are, in fact, those most capable of penetrating in depth into the respiratory system. People spend most of their time indoors where concentrations of some pollutants are sometimes higher than outdoors. Therefore, there is the need to ensure a healthy indoor environment and for this purpose the use of an air purifier can be a valuable aid especially now since it was demonstrated that indoor air quality has a high impact on spreading of viral infections such as that due to SARS-COVID19. In this study, we tested a commercial system that can be used as an air purifier. In particular it was verified its efficiency in reducing concentrations of PM10 (particles with aerodynamic diameter less than 10 µm), PM2.5 (particles with aerodynamic diameter less than 2.5 µm), PM1 (particles with aerodynamic diameter less than 1 µm), and particles number in the range 0.3 µm-10 µm. Furthermore, its capacity in reducing VOCs concentration was also checked. PM measurements were carried out by means of a portable optical particle counter (OPC) instrument simulating the working conditions typical of a household environment. In particular we showed that the tested air purifier significantly reduced both PM10 and PM2.5 by 16.8 and 7.25 times respectively that corresponds to a reduction of about 90% and 80%. A clear reduction of VOCs concentrations was also observed since a decrease of over 50% of these gaseous substances was achieved.

Size-Resolved Identification, Characterization, and Quantification of Primary Biological Organic Aerosol at a European Rural Site.

Primary biological organic aerosols (PBOA) represent a major component of the coarse organic matter (OMCOARSE, aerodynamic diameter > 2.5 µm). Although this fraction affects human health and the climate, its quantification and chemical characterization currently remain elusive. We present the first quantification of the entire PBOACOARSE mass and its main sources by analyzing size-segregated filter samples collected during the summer and winter at the rural site of Payerne (Switzerland), representing a continental Europe background environment. The size-segregated water-soluble OM was analyzed by a newly developed offline aerosol mass spectrometric technique (AMS). Collected spectra were analyzed by three-dimensional positive matrix factorization (3D-PMF), showing that PBOA represented the main OMCOARSE source during summer and its contribution to PM10 was comparable to that of secondary organic aerosol. We found substantial cellulose contributions to OMCOARSE, which in combination with gas chromatography mass spectrometry molecular markers quantification, underlined the predominance of plant debris. Quantitative polymerase chain reaction (qPCR) analysis instead revealed that the sum of bacterial and fungal spores mass represented only a minor OMCOARSE fraction (<0.1%). X-ray photoelectron spectroscopic (XPS) analysis of C and N binding energies throughout the size fractions revealed an organic N increase in the PM10 compared to PM1 consistent with AMS observations.

Setup of galvanic sensors for the monitoring of gilded bronzes.

Traditional electrochemical techniques, such as linear polarization resistance (Rp), and electrochemical impedance spectroscopy (EIS), cannot be applied to gilded bronzes, as it may not be possible to interpret the results obtained due to the bimetallic nature of the studied material. The measurement of the macrocouple current generated by the gold/bronze galvanic couple can be used as an indicator of degradation processes. Nevertheless, this measurement cannot be performed directly on the original artifacts due to the systematic presence of short-circuits between the two metals. In the present work the use of galvanic sensors is proposed as a possible solution for the monitoring of gilded bronze artefacts. The sensors have been designed to simulate real gilded bronze surfaces in terms of composition and stratigraphy and have proved to be a reliable diagnostic tool for the in situ monitoring of the rates of deterioration of gilded bronze surfaces and to test new conservation treatments. Their set-up and application is reported and their performances discussed.

Staphylococcus pseudintermedius and Pseudomonas aeruginosa Lubbock Chronic Wound Biofilm (LCWB): a suitable dual-species model for in vitro studies.

Antimicrobial treatment of methicillin-resistant Staphylococcus pseudintermedius associated with canine wounds represents an important challenge. The aim of this study was to create a canine wound infection model, Lubbock Chronic Wound Biofilm (LCWB), with a focus on S. pseudintermedius, drawing inspiration from the established human model involving S. aureus. Methicillin-resistant S. pseudintermedius 115 (MRSP) and Pseudomonas aeruginosa 700 strains, isolated from dog wounds, were used to set up the LCWB at 24, 48 and 72h. The LCWBs were evaluated in terms of volume, weight, and microbial CFU/mg. The microbial spatial distribution in the LCWBs was assessed by SEM and CLSM imaging. The best incubation time for the LCWB production in terms of volume (3.38 cm3 ± 0.13), weight (0.86 gr ± 0.02) and CFU/mg (up to 7.05 x 106 CFU/mg ± 2.89 x 105) was 48h. The SEM and CLSM images showed a major viable microbial colonization at 48h with a non-mixed bacteria with a prevalence of MRSP on the surface and P. aeruginosa 700 in the depth of the wound. The obtained findings demonstrate the capability of S. pseudintermedius to grow together P. aeruginosa in the LCWB model, representing the suitable model to reproduce the animal chronic wound in vitro.

Optimisation of analytical procedures for the quantification of ionic and carbonaceous fractions in the atmospheric aerosol and applications to ambient samples.

In the last decade, our research group set up and optimised analytical techniques for the characterisation of the major components of atmospheric aerosol (i.e. secondary inorganic ions and carbonaceous material) and source markers (e.g. levoglucosan, carbonates). In this study, we present a complete overview on the most problematic aspects that can be encountered during the quantification of the two main components of aerosol, i.e. the ionic and carbonaceous fractions. More in detail, different liquid chromatographic approaches were set up for main ions and anhydrosugars determination. Quality assurance procedures (i.e. tests on data reliability) were applied during the set-up phase and they are presented in this work. As regards the carbonaceous component characterisation, two evolved gas analysis techniques were set up and applied: the thermogravimetric technique coupled to the Fourier transformed infrared spectroscopy (TGA/FTIR) and the thermal-optical transmittance method (TOT). A suitable protocol for organic and elemental carbon separation was set up for the TGA/FTIR system and a comparison with the results obtained by the TOT method was carried out. Studies on the impact of filter load, field blanks, and sample composition on OC/EC quantification by the TOT method were performed. Moreover, approaches for carbonate carbon quantification on different kinds of filters were developed. It was demonstrated that this approach allows to reach the ionic balance in samples impacted by carbonate compounds. The optimised methods have been applied for the analysis of thousands of PM filters allowing the obtainment of reliable results.

Complex magnetic fields represent an eco-sustainable technology to counteract the resistant Candida albicans growth without affecting the human gingival fibroblasts.

Novel technologies such as complex magnetic fields-CMFs represent an eco-sustainable proposal to counteract the infection associated to resistant microorganisms. The aim of this study was to evaluate the effect of two CMF programs (STRESS, ANTIBACTERIAL) against clinical antifungal resistant C. albicans also evaluating their uneffectiveness on gingival fibroblasts (hGFs). The STRESS program was more efficacious on C. albicans biofilm with up to 64.37% ± 10.80 of biomass and up to 99.19% ± 0.06 CFU/ml reductions in respect to the control also inducing an alteration of lipidic structure of the membrane. The MTT assay showed no CMFs negative effects on the viability of hGFs with a major ROS production with the ANTIBACTERIAL program at 3 and 24 h. For the wound healing assay, STRESS program showed the best effect in terms of the rate migration at 24 h, showing statistical significance of p < 0.0001. The toluidine-blue staining observations showed the typical morphology of cells and the presence of elongated and spindle-shaped with cytoplasmic extensions and lamellipodia was observed by SEM. The ANTIBACTERIAL program statistically increased the production of collagen with respect to control and STRESS program (p < 0.0001). CMFs showed a relevant anti-virulence action against C. albicans, no cytotoxicity effects and a high hGFs migration rate. The results of this study suggest that CMFs could represent a novel eco-sustainable strategy to counteract the resistant yeast biofilm infections.

Characterization of black crusts developed on historic stones with diverse mineralogy under different air quality environments.

Black crusts (BCs) are one of the most critical alteration forms found on stones belonging to architectural heritage. Since they could be considered as passive samplers of atmospheric pollution, it would be plausible to establish relations between the air contamination and the BCs. With this aim, we have characterized BCs collected on historic buildings from two Spanish cities (Granada and Vigo) with different polluted atmospheres, as well as formed on stone substrates of varied mineralogy and texture. Likewise, in order to assess the impact of the atmospheric pollutants on the growth of BCs, quartz fiber filters were used as surrogate substrates and placed nearby the studied buildings to collect and analyze the aerosol particulate matter (PM). To this end, an array of complementary analytical techniques was used to evaluate the mineralogy, chemical composition, and texture of the BCs and to establish the correlation with the ions, OC (organic carbon), and EC (elemental carbon) detected in the PM on the quartz fiber filters. As result, BCs developed on carbonate substrates from Granada show more complex structure than those from Vigo, which are thinner because of frequent rain episodes. In both cities, NaCl, Pb-Cl, and Ca-Cl-rich particles, Ca-phosphate particles and clusters of Ba-sulfate-rich particles were detected. However, metal-rich rounded particles were more abundant in Granada's BCs, including soot particles. BCs from Granada were richer in carbonaceous components (OC and EC) than the Vigo's BCs. Although in the filters PM did not show EC-mainly due to traffic-, in the BCs from both locations OC and EC were detected. Therefore, this different composition was related to the mineralogy of the stones and the higher pollution of Granada in contrast to the industrial and sea-exposed city of Vigo.

Determination of Saffron Quality through a Multi-Analytical Approach.

Currently, the specifications for the assessment of saffron quality are contained in the ISO 3632 technical standard. This norm evaluates saffron quality through a UV-Vis spectrophotometric method and grades the spice into three commercial categories. However, numerous studies have highlighted several weaknesses and limitations of the ISO method. For this reason, a new multi-analytical approach for the determination of saffron quality is proposed in this work. Different techniques were employed to assess saffron quality: UV-visible spectroscopy (UV-Vis), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) and inductively coupled plasma-optical emission spectroscopy (ICP-OES). The results show that the commercial grading based on the ISO 3632 methodology is not always in line with the observations made with the other techniques. Moreover, the use of two new techniques in the field of saffron quality determination, i.e., SEM-EDX and ICP-OES, proved to be effective for the determination of elemental composition and metal content, which are two important parameters to take into consideration when assessing the quality of the spice.

The combined use of SEM-EDX, Raman, ATR-FTIR and visible reflectance techniques for the characterisation of Roman wall painting pigments from Monte d'Oro area (Rome): an insight into red, yellow and pink shades.

The aim of this work has been the identification of the painter's materials employed in the wall decoration of some destroyed buildings dating approximately between the first century B.C. and the first century A.D. This research originates from a previously started joined archaeological and analytical investigation concerning a varied group of findings that resulted from a rescue excavation performed by Soprintendenza Archeologica in the area of Monte d'Oro in Rome. The focus of this study progression has been directed to a numerous selection of monochrome red, pink and yellow-pigmented fragments. The analyses were performed by means of scanning electron microscopy energy dispersive X-ray spectroscopy (SEM-EDX) combined with Raman and Fourier transform infrared (FTIR) spectroscopies; visible reflectance measurements have also been carried out and the relevance of this technique in such a kind of archaeological studies has been highlighted. Most attention has been given to the assessment of the performances of non-destructive techniques achieved by portable Raman, and visible reflectance instrumentation to test their diagnostic capabilities. In addition to the expected and well-known pigments such as cinnabar, red ochre, hematite for the reds and yellow ochre for the yellows, the study highlighted a diffuse use of mixed colours and in some cases the possible presence of overlapped painted layers and confirmed the presence of gildings. Among the mixtures of pigments, the most singular outcome concerns the pink fragments revealing the possible application of bone white, which seems to be rather uncommon as a pigment in Roman wall decorations.

Study of a surface coating present on a Renaissance Piety from the Museum of Ancient Art (Castello Sforzesco, Milan).

The surface coating present on a marble Piety dating to the Renaissance period and stored at the Castello Sforzesco-Museum of Ancient Art (Milan, Italy) was studied and chemically characterised. For this purpose, both portable non-invasive (XRF and colorimetric measurements) and micro-invasive techniques (FTIR-ATR and SEM-EDS), have been applied. The statue has been recently submitted to a restoration, since its surface appeared dark and yellowed, before an exhibition at the Louvre Museum and the original appearance of the marble surface recovered thanks to the surface coating removal. Through the analytical characterisation carried out before and after the marble cleaning, the presence of a degradation layer composed by gypsum was evidenced on the stone. The origin of this layer is ascribable to the exposure of the statue to outdoor environment and interaction with atmospheric pollution. The chemical nature of the coating applied at the end of nineteenth century also responsible for the surface alteration was hypothesized.

Calcitic-based stones protection by a low-fluorine modified methacrylic coating.

Atmospheric pollutants, such as NOx, SO2, and particulate matter, together with water percolation inside the stone pores, represent the main causes of cultural heritage decay. In order to avoid these undesired phenomena, the application of protective coatings represents a reliable solution. In this context, the present study focused on the synthesis of low-fluorine content methacrylic-based (MMA) polymeric resins characterized by seven F atoms (namely F7 monomer) in the lateral chains. Four different percentages (1.0, 2.5, 5.0, and 10.0%) of the present monomer were adopted to obtain a final polymeric structure showing the desired hydrophobicity, processability, and structural and thermal stability (even after accelerated UV aging tests). MMA_F7(1.0) seemed to be the optimal one; therefore, it was further applied onto Candoglia marble. Specifically, the treated substrates showed good surface hydrophobicity, water repellency, and water vapor transpirability. No color variation was observed even after a 1.5-year exposure in a real polluted environment (Monza Cathedral). Interestingly, the application of this coating hindered the atmospheric nitrates penetration inside the stones and, at the same time, it limited the sulfates (gypsum) formation, thus revealing a very promising marbles protection resin.

Complex Chronic Wound Biofilms Are Inhibited in vitro by the Natural Extract of Capparis spinose.

Resistant wound microorganisms are becoming an extremely serious challenge in the process of treating infected chronic wounds, leading to impaired healing. Thus, additional approaches should be taken into consideration to improve the healing process. The use of natural extracts can represent a valid alternative to treat/control the microbial infections in wounds. This study investigates the antimicrobial/antivirulence effects of Capparis spinose aqueous extract against the main chronic wound pathogens: Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. The extract shows phenolic characterization with rutin (1.8 ± 0.14 µg/mg) as the major compound and antibacterial effect against bacteria (S. aureus PECHA 10 MIC 6.25%; P. aeruginosa PECHA 4 MIC 12.50%) without action against C. albicans (MIC and MFC ≥ 50%). Capparis spinose also shows a significant antivirulence effect in terms of antimotility/antibiofilm actions. In particular, the extract acts (i) on P. aeruginosa both increasing its swimming and swarming motility favoring the planktonic phenotype and reducing its adhesive capability, (ii) on S. aureus and P. aeruginosa biofilm formation reducing both the biomass and CFU/ml. Furthermore, the extract significantly displays the reduction of a dual-species S. aureus and P. aeruginosa Lubbock chronic wound biofilm, a complex model that mimics the realistic in vivo microbial spatial distribution in wounds. The results suggest that C. spinose aqueous extract could represent an innovative eco-friendly strategy to prevent/control the wound microbial infection.

Multitechnique diagnostic analysis and 3D surveying prior to the restoration of St. Michael defeating Evil painting by Mattia Preti.

In this study, a multimethodological analysis involving optical and physical/chemical diagnostic techniques and 3D photogrammetric survey was successfully applied, for the first time, on the large oil on canvas St. Michael defeating Evil painting by Mattia Preti, located inside the Church of the Immaculate Conception of Sarria (Floriana) in Malta. Pigmenting agents, binder media, and raw materials were first characterized, both at elemental and molecular scales, through X-ray fluorescence spectroscopy (XRF), optical stereo microscopy (SM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR), and gas chromatography coupled with mass spectrometry (GC-MS). The main goal was to properly identify the execution technique of this famous painter, the artist's palette, and possible nondocumented interventions. The 3D photogrammetric survey, on the other side, allowed us to noninvasively evaluate the extension of the areas that experienced restorations, and to properly map the domains of the different canvasses observed. The joints between canvasses suggested that the painting was folded and rolled up. In addition, the employment of a thermal camera gave evidence of the different consolidating material injection points used during the restoration to strengthen the painting. The obtained results offer useful information for the development of optimized restoration and conservation strategies to be applied and provide, at the same time, answers to open questions related to provenance and dating of the investigated artwork.

Elemental Analysis and Phenolic Profiles of Selected Italian Wines.

The study of the chemical composition of wines is nowadays a topic of great interest because of the importance of this market, especially in Italy, and also considering the numerous cases of falsification of famous and very expensive wines. The present paper focused on the analysis of metals and polyphenols in Italian wines belonging to different provenance and types. At this purpose 20 elements were quantified by inductively coupled plasma optical emission spectrometry (ICP-OES) and ICP mass spectrometry (ICP-MS). Regarding polyphenols, a total of 32 were quantified, among 6 were anthocyanins. Furthermore, in 4 samples (1 rosè and 3 red wines) 42 anthocyanins and related compounds were identified by ultra-high performance liquid chromatography (UHPLC)-Orbitrap MS technique (among these, 6 were also quantified). Non-anthocyanins were determined using UHPLC coupled with a diode array detector and triple-quadrupole mass spectrometer (UHPLC-DAD-QqQ-MS). Total phenolic content (TPC) and radical scavenging activity (RSA) were measured using spectrophotometric methods. The results obtained by elemental techniques were submitted to principal components analysis (PCA) allowing to get information on both geographical and botanical origin of the examined wine samples. Some polyphenols have been detected in higher concentrations only in a certain type of wine, as for example in the case of Grechetto wine. Most of the identified anthocyanin derivatives (pyranoanthocyanins) are formed during the aging of wine by reaction with the other wine components.