Physical map of QTL for eleven agronomic traits across fifteen environments, identification of related candidate genes, and development of KASP markers with emphasis on terminal heat stress tolerance in common wheat.

KEY MESSAGE: Key message This study identified stable QTL, promising candidate genes and developed novel KASP markers for heat tolerance, providing genomic resources to assist breeding for the development of high-yielding and heat-tolerant wheat germplasm and varieties. To understand the genetic architecture of eleven agronomic traits under heat stress, we used a doubled-haploid population (177 lines) derived from a heat-sensitive cultivar (PBW343) and a heat-tolerant genotype (KSG1203). This population was evaluated under timely, late and very late sown conditions over locations and years comprising fifteen environments. Best linear unbiased estimates and a genetic map (5,710 SNPs) developed using sequencing-based genotyping were used for QTL mapping. The identified 66 QTL (20 novel) were integrated into wheat physical map (14,263.4 Mb). These QTL explained 5.3% (QDth.ccsu-4A for days to heading and QDtm.ccsu-5B for days to maturity) to 24.9% (QGfd.ccsu-7D for grain filling duration) phenotypic variation. Thirteen stable QTL explaining high phenotypic variation were recommended for marker-assisted recurrent selection (MARS) for optimum/heat stress environments. Selected QTL were validated by their presence in high-yielding doubled-haploid lines. Some QTL for 1000-grain weight (TaERF3-3B, TaFER-5B, and TaZIM-A1), grain yield (TaCol-B5), and developmental traits (TaVRT-2) were co-localized with known genes. Specific known genes for traits like abiotic/biotic stress, grain quality and yield were co-located with 26 other QTL. Furthermore, 209 differentially expressed candidate genes for heat tolerance in plants that encode 28 different proteins were identified. KASP markers for three major/stable QTL, namely QGfd.ccsu-7A for grain filling duration on chromosome 7A (timely sown), QNgs.ccsu-3A for number of grains per spike on 3A, and QDth.ccsu-7A for days to heading on 7A (late and very late sown) environments were developed for MARS focusing on the development of heat-tolerant wheat varieties/germplasm.

Enhancing agricultural output: Investigating the impact of advanced organic formulations on crop productivity, nutrient use efficiency, and profitability in a multi-crop system.

The significance of integrating agricultural by-products such as paddy husk ash (PHA) and potato peels with organic fertilizers lies in enhancing soil fertility, increasing crop yields, and reducing reliance on traditional organic fertilizers like farmyard manure (FYM) or compost alone. Grounded in sustainable agriculture and nutrient management frameworks, this study examines the impact of diverse formulations derived from agricultural waste on productivity, nutrient efficiency, and profitability in a pigeon pea-vegetable mustard-okra cropping system. A two-year field experiment (2020-2022) at ICAR-IARI, New Delhi tested seven nutrient sources viz., (T1) control, (T2) 100% RDN through FYM, (T3) 100% RDN through improved RRC, (T4) 100% RDN through PHA based formulation, (T5) 75% RDN through PHA based formulation, (T6) 100% RDN through PPC based formulation and (T7) 75% RDN through PPC based formulation that were tested in RBD and replicated thrice. Treatment T4 had significant effect on seed yield of pigeon pea (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1), leaf yield of vegetable mustard (81.57 ± 4.59 and 82.97 ± 4.17 t ha-1), and fruit yield of okra (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) grown in rotation, followed by treatment T6 and T2 during both the years respectively over control. Enhanced system uptake of N, P and K along with system gross and net returns in T4, showed increases of 78.9%, 83.8%, 72.4%, 54.4% and 56.8% in the first year and 77.5%, 80.8%, 77.7%, 54.8% and 57.4% in the second year, respectively, over control. Treatment T4 significantly improved apparent recovery by 66.3% and 69.2% in pigeon pea, 64.7% and 47.9% in vegetable mustard, and 72.7% and 79.4% in okra over T3, averaged across two years. Based on the above findings, (T4) 100% RDN through PHA-based formulation, and (T6) 100% RDN through PPC-based formulation can be recommended for areas with a shortage of FYM but availability of rice husk ash/potato peels for sustainable agricultural wastes and improved sustainability.

Swallowing dysfunction between the community-living older adults with and without comorbid conditions using Patient-Reported Outcome Measures (PROM).

OBJECTIVE: The present study aimed to investigate older adults' perspective on their swallowing physiology using a PROM tool. The study further explored the swallowing issues among older adults with and without comorbid conditions. METHOD: One hundred twenty-two (122) participants participated in the e-survey. A questionnaire was developed to assess the swallowing deficits among older adults, and Eating Assessment Tool-10 (EAT-10) was administered to assess the PROM. RESULTS: The results revealed that 40% of older adults with comorbid conditions had EAT-10 scores greater than 3, suggesting swallowing deficits. A significant difference was observed between the two groups with respect to swallowing deficits, as reported on EAT-10. CONCLUSION: Based on the results, it can be delineated that swallowing deficits emerge with aging. More of older adults with comorbid conditions reported swallowing deficits in comparison to those without comorbid conditions. Hence, their nutritional and health status gets compromised, leading to poor quality of life.

Identification and characterization of RuvBL DNA helicase genes for tolerance against abiotic stresses in bread wheat (Triticum aestivum L.) and related species.

Recombination UVB (sensitivity) like (RuvBL) helicase genes represent a conserved family of genes, which are known to be involved in providing tolerance against abiotic stresses like heat and drought. We identified nine wheat RuvBL genes, one each on nine different chromosomes, belonging to homoeologous groups 2, 3, and 4. The lengths of genes ranged from 1647 to 2197 bp and exhibited synteny with corresponding genes in related species including Ae. tauschii, Z. mays, O. sativa, H. vulgare, and B. distachyon. The gene sequences were associated with regulatory cis-elements and transposable elements. Two genes, namely TaRuvBL1a-4A and TaRuvBL1a-4B, also carried targets for a widely known miRNA, tae-miR164. Gene ontology revealed that these genes were closely associated with ATP-dependent formation of histone acetyltransferase complex. Analysis of the structure and function of RuvBL proteins revealed that the proteins were localized mainly in the cytoplasm. A representative gene, namely TaRuvBL1a-4A, was also shown to be involved in protein-protein interactions with ten other proteins. On the basis of phylogeny, RuvBL proteins were placed in two sub-divisions, namely RuvBL1 and RuvBL2, which were further classified into clusters and sub-clusters. In silico studies suggested that these genes were differentially expressed under heat/drought. The qRT-PCR analysis confirmed that expression of TaRuvBL genes differed among wheat cultivars, which differed in the level of thermotolerance. The present study advances our understanding of the biological role of wheat RuvBL genes and should help in planning future studies on RuvBL genes in wheat including use of RuvBL genes in breeding thermotolerant wheat cultivars.

Screening Multi-layered Two-dimensional Cd-chalcogenide Structures as Potential Candidates for Photocatalysis.

In recent years, clean and sustainable energy generation by photocatalytic water splitting has gained enormous attention from researchers. Two-dimensional Cd-based structures play a central role in the research of semiconductor-based photocatalysis. Here, a few layers of cadmium monochalcogenides (CdX; X=S, Se, and Te) are theoretically investigated using density functional theory (DFT). For their potential applicability in photocatalysis, it is proposed that they are exfoliated from the wurtzite structure with an electronic gap that depends on the thickness of the proposed systems. Our calculations address a long-standing doubt about the stabilities of free-standing CdX monolayers (ML). Induced buckling removes the acoustic instabilities in 2D planar hexagonal CdX structures (due to interlayer interactions) that depend on the number of neighboring atomic layers present. All studied (and stable) systems have an electronic gap of >1.68 eV, calculated with hybrid functionals (HSE06). A band-edge alignment plot about the water's oxidation-reduction potential is constructed, and a potential energy surface is constructed for the hydrogen evolution reaction. Our calculations suggest that the chalcogenide site is most favorable for hydrogen adsorption, and the energy barrier falls within the experimentally achievable limits.

T-Piece resuscitator versus self-inflating bag for delivery room resuscitation in preterm neonates: a randomized controlled trial.

The establishment of adequate ventilation is the cornerstone of neonatal resuscitation in the delivery room (DR). This parallel-group, accessor-blinded randomized controlled trial compared the changes in peripheral oxygen saturation (SpO2), heart rate (HR), and cerebral regional oxygen saturation (crSO2) with the use of a T-piece resuscitator (TPR) versus self-inflating bag (SIB) as a mode of providing positive pressure ventilation (PPV) during DR resuscitation in preterm neonates. Seventy-two preterm neonates were randomly allocated to receive PPV with TPR (n = 36) or SIB (n = 36). The primary outcome was SpO2 (%) at 5 min. The secondary outcomes included the time to achieve a SpO2 ≥ 80% and > 85%, HR > 100/min, fractional-inspired oxygen (FiO2) requirement, minute-specific SpO2, HR and FiO2 trends for the first 5 min of life, need for DR-intubation, crSO2, need and duration of respiratory support, and other in-hospital morbidities. Mean SpO2 at 5 min was 74.5 ± 17.8% and 69.4 ± 22.4%, in TPR and SIB groups, respectively [Mean difference, 95% Confidence Interval 5.08 (-4.41, 14.58); p = 0.289]. No difference was observed in the time to achieve a SpO2 ≥ 80% and > 85%, HR > 100/min, the requirement of FiO2, DR-intubation, and the need and duration of respiratory support. There was no significant difference in the minute-specific SpO2, HR, and FiO2 requirements for the first 5 min. CrSO2 (%) at one hour was lower by 5% in the TPR group compared to SIB; p = 0.03. Other complications were comparable. CONCLUSIONS: TPR and SIB resulted in comparable SpO2 at 5 min along with similar minute-specific SpO2, HR, and FiO2 trends. CLINICAL TRIAL REGISTRATION: Clinical trial registry of India, Registration no: CTRI/2021/10/037384, Registered prospectively on: 20/10/2021, https://ctri.icmr.org.in/ . WHAT IS KNOWN: • Compared to self-inflating bags (SIB), T-piece resuscitators (TPR) provide more consistent inflation pressure and tidal volume as shown in animal and bench studies. • There is no strong recommendation for one device over the other in view of low certainty evidence. WHAT IS NEW: • TPR and SIB resulted in comparable peripheral oxygen saturation (SpO2) at 5 min along with similar minute-specific SpO2, heart rate, and fractional-inspired oxygen requirement trends. • Short-term complications and mortality rates were comparable with both devices.

WheatQTLdb V2.0: a supplement to the database for wheat QTL.

We recently developed a database for hexaploid wheat QTL (WheatQTLdb; www.wheatqtldb.net), which included 11,552 QTL affecting various traits of economic importance. However, that database did not include valuable QTL from other wheat species and/or progenitors of hexaploid wheat. Therefore, an updated and improved version of wheat QTL database (WheatQTLdb V2.0) was developed, which now includes information on hexaploid wheat (Triticum aestivum) and the following seven other related species: T. durum, T. turgidum, T. dicoccoides, T. dicoccum, T. monococcum, T. boeoticum, and Aegilops tauschii. WheatQTLdb V2.0 includes a much-improved list of QTL, including 27,518 main effect QTL, 202 epistatic QTL, and 1321 metaQTL. This newly released WheatQTLdb V2.0 also has additional valuable options to search and choose the QTL, category-wise, and trait-wise data for their use in research or breeding programs.

Optimization of the frying process in relation to quality characteristics of Khaja (A traditional sweet).

The present study was focused on the optimization of process parameters and quality characterization of Khaja. A full factorial design 53 was applied using different levels of fat proportions (5-25%), frying temperature (160-200 °C), and frying time (1-5 min). The response optimizer function in Minitab 18 software was used to select five samples with the highest desirability which were then subjected to sensory analysis. The lightness of the samples decreased significantly (P ˂ 0.05) from 68.59 to 43.33 whereas, redness increased significantly (P ˂ 0.05) from 0.26 to 11.48 with increasing levels of all independent variables. Water activity and moisture content of the samples decreased significantly (P ˂ 0.05) from 0.75 to 0.21 and 14.41-1.40%wb respectively, whereas total fat content increased significantly (P ˂ 0.05) from 25.05 to 45.7% with increasing levels of independent variables. The hardness of the samples significantly (P ˂ 0.05) varied from 60.45 to 7.69 N. The sensory analysis revealed that the sample with 20% fat proportion, fried at 180 °C for 4 min, scored maximum in overall acceptability. The microstructural images revealed the structural damage and formation of pores in fried samples. The fatty acid analysis showed higher saturated fatty acids in market samples than in optimized samples. The results of the study concluded that fat proportion and frying parameters (temperature and time) are crucial for a better understanding of the deep-frying process of Khaja in order to achieve good quality. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05509-x.

WheatQTLdb: a QTL database for wheat.

During the last three decades, QTL analysis in wheat has been conducted for a variety of individual traits, so that thousands of QTL along with the linked markers, their genetic positions and contribution to phenotypic variation (PV) for concerned traits are now known. However, no exhaustive database for wheat QTL is currently available at a single platform. Therefore, the present database was prepared which is an exhaustive information resource for wheat QTL data from the published literature till May, 2020. QTL data from both interval mapping and genome-wide association studies (GWAS) have been included for the following classes of traits: (i) morphological traits, (ii) N and P use efficiency, (iii) traits for biofortification (Fe, K, Se, and Zn contents), (iv) tolerance to abiotic stresses including drought, water logging, heat stress, pre-harvest sprouting and salinity, (v) resistance to biotic stresses including those due to bacterial, fungal, nematode and insects, (vi) quality traits, and (vii) a variety of physiological traits, (viii) developmental traits, and (ix) yield and its related traits. For the preparation of the database, literature was searched for data on QTL/marker-trait associations (MTAs), curated and then assembled in the form of WheatQTLdb. The available information on metaQTL, epistatic QTL and candidate genes, wherever available, is also included in the database. Information on QTL in this WheatQTLdb includes QTL names, traits, associated markers, parental genotypes, crosses/mapping populations, association mapping panels and other useful information. To our knowledge, WheatQTLdb prepared by us is the largest collection of QTL (11,552), epistatic QTL (107) and metaQTL (330) data for hexaploid wheat to be used by geneticists and plant breeders for further studies involving fine mapping, cloning, and marker-assisted selection (MAS) during wheat breeding.

Meta-QTLs, ortho-MQTLs, and candidate genes for thermotolerance in wheat (Triticum aestivum L.).

Meta-QTL analysis for thermotolerance in wheat was conducted to identify robust meta-QTLs (MQTLs). In this study, 441 QTLs related to 31 heat-responsive traits were projected on the consensus map with 50,310 markers. This exercise resulted in the identification of 85 MQTLs with confidence interval (CI) ranging from 0.11 to 34.9 cM with an average of 5.6 cM. This amounted to a 2.96-fold reduction relative to the mean CI (16.5 cM) of the QTLs used. Seventy-seven (77) of these MQTLs were also compared and verified with the results of recent genome-wide association studies (GWAS). The 85 MQTLs included seven MQTLs that are particularly useful for breeding purposes (we called them breeders' MQTLs). Seven ortho-MQTLs between wheat and rice genomes were also identified using synteny and collinearity. The MQTLs were used for the identification of 1,704 candidate genes (CGs). In silico expression analysis of these CGs permitted identification of 182 differentially expressed genes (DEGs), which included 36 high confidence CGs with known functions previously reported to be important for thermotolerance. These high confidence CGs encoded proteins belonging to the following families: protein kinase, WD40 repeat, glycosyltransferase, ribosomal protein, SNARE associated Golgi protein, GDSL lipase/esterase, SANT/Myb domain, K homology domain, etc. Thus, the present study resulted in the identification of MQTLs (including breeders' MQTLs), ortho-MQTLs, and underlying CGs, which could prove useful not only for molecular breeding for the development of thermotolerant wheat cultivars but also for future studies focused on understanding the molecular basis of thermotolerance. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-021-01264-7.

Ultrasonic and osmotic pretreatments followed by convective and vacuum drying of papaya slices.

BACKGROUND: Papaya fruit is highly nutritive, but very fragile, and thus has a limited shelf life. Drying is essential to preserve it for longer durations. In this work, osmotic dehydration (OD) with and without ultrasound (US) was applied to papaya slices as a pretreatment in conjugation with vacuum (VD) and convective air drying (AD). Drying was carried out in a novel dryer. Moisture content, drying time, water activity, total color change, total phenolic content, radical scavenging activity, texture, and Fourier-transform infrared (FTIR) spectrums were evaluated for fresh and dried papaya slices. RESULTS: It was observed that US-assisted osmotic dehydration (USOD) followed by VD had the lowest drying time with highest retention of phenols and antioxidants as compared to other drying techniques. Higher phenols and antioxidants in US-pretreated samples were attributed to the release of trapped intra-cellular polyphenols by cavitation. However, the color characteristics and texture of OD pretreatment followed by convective AD slices were found to be better. Color retention could be due to carotenoid preservation, which would be degraded in other treatments, whereas lower brittleness was associated with lower pectin. Infrared spectroscopy confirmed the retention of phytochemicals and antioxidants in dried papaya slices that were subjected to pretreatment. CONCLUSION: Pretreatment before drying enhances the end product quality of dried papaya slices. The results of this study highlight that USOD-VD is effective for nutrition preservation while OD-AD is suitable for preserving physical characteristics. © 2020 Society of Chemical Industry.

The Mechanism of Flex-Activation in Mechanophores Revealed By Quantum Chemistry.

Flex-activated mechanophores can be used for small-molecule release in polymers under tension by rupture of covalent bonds that are orthogonal to the polymer main chain. Using static and dynamic quantum chemical methods, we here juxtapose three different mechanical deformation modes in flex-activated mechanophores (end-to-end stretching, direct pulling of the scissile bonds, bond angle bendings) with the aim of proposing ways to optimize the efficiency of flex-activation in experiments. It is found that end-to-end stretching, which is a traditional approach to activate mechanophores in polymers, does not trigger flex-activation, whereas direct pulling of the scissile bonds or displacement of adjacent bond angles are efficient methods to achieve this goal. Based on the structural, energetic and electronic effects responsible for these observations, we propose ways of weakening the scissile bonds experimentally to increase the efficiency of flex-activation.

Double-Exchange Magnetic Interactions in High-Temperature Ferromagnetic Iron Chalcogenide Monolayers.

Smythite ( F e 3 S 4 ) is an iron-based chalcogenide with a lamellar structure, different from the compositionally identical mineral greigite. Owing to their natural abundance, such transition metal chalcogenides are promising materials for low-cost spintronic-based devices. Herein, we discuss the charge transfer processes and complex magnetic ordering in a two-dimensional (2D) smythite lattice. We find that F e 2 + / F e 3 + redox couple and complex magnetic ordering are governing factors in the charge transfer processes. A very strong ferromagnetic in-lattice coupling is also observed, which is attributed to the presence of three Fe-centres. To describe the magnetic behaviour molecular and periodic approaches have been considered. We found a substantial increase in Curie temperature with applied mechanical stress due to opening of the double exchange interaction angle. We also observe an in-plane Jahn-Teller distortion, which is further confirmed by the spin-orbit counter plot. Our study thus provides an insight into the double exchange mechanism favoured by the F e 2 + / F e 3 + redox couple and results in a strong ferromagnetic ordering.

Less invasive surfactant administration with specially designed semirigid catheter: Experience from a tertiary level neonatal unit of a lower middle-income country.

Clinical outcomes of 74 preterm neonates, who received surfactant replacement therapy (SRT), were collected retrospectively, to compare the following modes of administration: (1) less invasive surfactant administration (LISA) via a specially designed semirigid catheter (Surfcath), (2) INtubate-SURfactant-Extubate (INSURE) and (3) through endotracheal tube (ETT), in neonates requiring mechanical ventilation. The primary composite outcome of mortality or bronchopulmonary dysplasia (BPD) at 36 weeks' post-menstrual age was 41% in LISA, 38% in INSURE and 77% in ETT groups (p < 0.01), the difference being mainly due to the high incidence of mortality in the latter. LISA, via a specially designed semirigid catheter, was safe and feasible in preterm neonates.

Effects of Local Wound Infiltration Post-Mastectomy Using Bupivacaine Alone, Bupivacaine With Ketamine, and Bupivacaine With Dexmedetomidine: A Randomized Double-Blind Study.

Background and aim While the infiltration of surgical incisions with local anesthetics is not a new practice, it remains a crucial component of contemporary multimodal analgesia protocols. This study aimed to evaluate the efficacy and safety of using adjuvants in combination with local anesthetic wound infiltration for pain management in patients undergoing mastectomy surgery. Methods Eighty-one patients aged 18-60 years, classified as American Society of Anesthesiologists (ASA) grade I or II, were scheduled for unilateral mastectomy and randomly assigned to three groups of 27 each. The groups were designated as Group C (bupivacaine alone), Group D (bupivacaine with dexmedetomidine), and Group K (bupivacaine with ketamine). Group C received 0.25% bupivacaine alone, Group D received 0.25% bupivacaine with 1 mcg/kg dexmedetomidine, and Group K received 0.25% bupivacaine with 1 mg/kg ketamine. The time to achieve a Visual Analogue Scale (VAS) score of 3 following local wound infiltration was recorded for each group. Additionally, total postoperative fentanyl intake during the first 24 hours, as measured by the patient-controlled analgesia (PCA) pump, was compared among the groups. Sedation levels were assessed using the Ramsay Sedation Scale (RSS). Data were analyzed using the Chi-Square test and one-way ANOVA in IBM SPSS Statistics for Windows, Version 28.0 (Released 2021; IBM Corp., Armonk, NY, USA). Results Demographic factors were similar across the three groups. Analysis of the VAS scores revealed that the ketamine group provided better postoperative pain control than the dexmedetomidine group (p < 0.001). Groups D (71.72 ± 71.73) and K (3.53 ± 13.42) had significantly lower 24-hour fentanyl intake (in mcg) compared to Group C (the control group), as measured by PCA. Additionally, Group C had a significantly lower RSS at the sixth hour (p = 0.003) compared to both Groups D and K. Conclusion Ketamine, when used as an adjuvant to bupivacaine for local infiltration, enhances the effectiveness and prolongs postoperative analgesia more effectively than dexmedetomidine in patients undergoing mastectomy.

Comparative Study of Levobupivacaine Versus Levobupivacaine With Dexmedetomidine as an Adjuvant in Transversus Abdominis Block for Postoperative Pain Relief in Abdominal Hysterectomy Patients: A Randomized, Double-Blind Study.

Background Adjuvants have been discovered to prolong the analgesic impact of local anesthetics (LA), while the transversus abdominis plane (TAP) block offers sufficient postoperative pain relief after various abdominal procedures. Nevertheless, the impact of the given LA will determine the duration of the TAP block. Thus, in this investigation, we aimed to estimate the analgesic impact of combining dexmedetomidine (DEX) with levobupivacaine in the TAP block for patients having an infraumbilical incision for an abdominal hysterectomy while under spinal anesthetic. Aim This study aimed to determine the analgesic effect of DEX (0.5 mcg/kg) to 20 ml of 0.25% levobupivacaine on each side in the TAP block in patients undergoing total abdominal hysterectomy (TAH). Materials and methods Two groups of 30 patients each, with ASA grades 1 and 2, were randomly selected from patients. Group N, comprising 30 patients, had a bilateral TAP block using 2 mL of normal saline and 20 mL of 0.25% levobupivacaine. Group D (n = 30 patients) was given DEX at a dose of 0.5 mcg/kg (2 mL) in addition to 20 mL of 0.25% levobupivacaine given bilaterally. The TAP block was administered just after skin closure. Time of the initial analgesic dose administration; total fentanyl doses utilized as rescue analgesia; pain scores (numerical rating scale (NRS)) at 2, 4, 6, 8, 12, and 24 hours; and pre- and postoperative cortisol levels were also noted. For each group, 1 gram IV paracetamol was administered every eight hours. Drugs used for rescue analgesia (RA) were diclofenac 75 mg IV stat and fentanyl 1 mcg/kg. Results and discussion In addition to Group N having lower NRS scores at rest, Group D had a considerably longer time for initial rescue analgesia than Group N. There was also a significant decrease in the total fentanyl consumption and postoperative serum cortisol levels in Group D in contrast to Group N. Conclusion Potential adjuvant DEX prolongs postoperative analgesia in patients experiencing abdominal hysterectomy when used alongside LA in TAP.

Boosting quantum yields and circularly polarized luminescence of penta- and hexahelicenes by doping with two BN-groups.

The incorporation of boron-nitrogen (BN) units into polycyclic aromatic hydrocarbons (PAHs) as an isoelectronic replacement of two carbon atoms can significantly improve their optical properties, while the geometries are mostly retained. We report the first non-π-extended penta- and hexahelicenes comprising two aromatic 1,2-azaborinine rings. Comparing them with their all-carbon analogs regarding structural, spectral and (chir)optical properties allowed us to quantify the impact of the heteroatoms. In particular, BN-hexahelicene BN[6] exhibited a crystal structure congruent with its analog CC[6], but displayed a fivefold higher fluorescence quantum yield (φfl = 0.17) and an outstanding luminescence dissymmetry factor (|glum| = 1.33 × 10-2). Such an unusual magnification of both properties at the same time makes BN-helicenes suitable candidates as circularly polarized luminescence emitters for applications in materials science.

Optimizing crop quality and yield: Assessing the impact of integrated potassium management on Chinese cabbage (Brassica rapa L. subsp. chinensis).

Potassium, a pivotal macronutrient essential for growth, development, and crop yield, serves as a critical determinant of soil productivity. Its depletion disrupts the equilibrium of soil nutrients, prompting an investigation into integrated potassium management strategies to address this challenge. A field experiment was conducted during the winter season of 2020 using a randomized complete block design, with eight treatments, each replicated three times in Chinese cabbage (Brassica rapa L. subsp. chinensis). These treatments comprised standard (100 %) and reduced (75 % and 50 %) rates of the recommended dose of potassium (RDK) via muriate of potash (MOP). Variations in the inclusion and exclusion of plant growth-promoting rhizobacteria (PGPR), farmyard manure (FYM) as 25 % of the potassium recommendation, and foliar spray of nano potash were systematically implemented. Findings unequivocally demonstrated that the treatmentT8, involving 100 % RDK +25 % K through FYM + PGPR + nano K fertilizer spray at 25 and 40 DAS, yielded significant improvements in both green fodder (64.0 t ha-1) and dry fodder (7.87 t ha-1).Moreover, T8 exhibited the highest values for total ash (8.75 %), total ash yield (68.9 ± 2.88 kg ha-1), ether extract (2.85 %), ether extract yield (22.4 ± 0.88 kg ha-1), crude protein (9.71 %), and total crude protein yield (76.4 ± 3.21 kg ha-1). Conversely, a marked reduction was observed in various fiber components and carbohydrate fractions upon application of the T8 treatment. The lowest values of yield, crude protein content, total ash ether extract were recorded in treatment T1 (control) applied with no potassium. This investigation underscores the inadequacy of the recommended potassium dose in achieving optimal productivity, necessitating a re-evaluation of potassium fertilization levels. The integrated approach involving FYM, PGPR, and nano potash, coupled with the recommended potassium dose through MOP, emerges as a promising avenue for augmenting both yield and quality parameters in Chinese cabbage.

Optimizing agricultural sustainability: enriched organic formulations for growth, yield, and soil quality in a multi-crop system.

Utilizing agricultural and industrial wastes, potent reservoirs of nutrients, for nourishing the soil and crops through composting embodies a sustainable approach to waste management and organic agriculture. To investigate this, a 2-year field experiment was conducted at ICAR-IARI, New Delhi, focusing on a pigeon pea-vegetable mustard-okra cropping system. Seven nutrient sources were tested, including a control (T1), 100% recommended dose of nitrogen (RDN) through farmyard manure (T2), 100% RDN through improved rice residue compost (T3), 100% RDN through a paddy husk ash (PHA)-based formulation (T4), 75% RDN through PHA-based formulation (T5), 100% RDN through a potato peel compost (PPC)-based formulation (T6), and 75% RDN through PPC-based formulation (T7). Employing a randomized block design with three replications, the results revealed that treatment T4 exhibited the significantly highest seed (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1) and stover (7.83 ± 0.41 and 8.03 ± 0.58 t ha-1) yield of pigeon pea, leaf yield (81.57 ± 4.69 and 82.97 ± 4.17 t ha-1) of vegetable mustard, and fruit (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) and stover (21.64 ± 1.31 and 22.03 ± 1.30 t ha-1) yield of okra during both study years compared to the control (T1). Treatment T4 was on par with T2 and T6 for seed and stover yield in pigeon pea, as well as okra, and leaf yield in vegetable mustard over both years. Moreover, T4 demonstrated notable increase of 124.1% and 158.2% in NH4-N and NO3-N levels in the soil, respectively, over the control. The enhanced status of available nitrogen (N) and phosphorus (P) in the soil, coupled with increased soil organic carbon (0.41%), total bacteria population (21.1%), fungi (37.2%), actinomycetes (44.6%), and microbial biomass carbon (28.5%), further emphasized the positive impact of T4 compared to the control. Treatments T2 and T6 exhibited comparable outcomes to T4 concerning changes in available N, P, soil organic carbon, total bacteria population, fungi, actinomycetes, and microbial biomass carbon. In conclusion, treatments T4 and T6 emerge as viable sources of organic fertilizer, particularly in regions confronting farmyard manure shortages. These formulations offer substantial advantages, including enhanced yield, soil quality improvement, and efficient fertilizer utilization, thus contributing significantly to sustainable agricultural practices.