RESUMO
Sb2 Te3 exhibits several technologically relevant properties, such as high thermoelectric efficiency, topological insulator character, and phase change memory behavior. Improved performances are observed and novel effects are predicted for this and other chalcogenide alloys when synthetized in the form of high-aspect-ratio nanostructures. The ability to grow chalcogenide nanowires and nanopillars (NPs) with high crystal quality in a controlled fashion, in terms of their size and position, can boost the realization of novel thermoelectric, spintronic, and memory devices. Here, it is shown that highly dense arrays of ultrascaled Sb2 Te3 NPs can be grown by metal organic chemical vapor deposition (MOCVD) on patterned substrates. In particular, crystalline Sb2 Te3 NPs with a diameter of 20 nm and a height of 200 nm are obtained in Au-functionalized, anodized aluminum oxide (AAO) templates with a pore density of ≈5 × 1010 cm-2 . Also, MOCVD growth of Sb2 Te3 can be followed either by mechanical polishing and chemical etching to produce Sb2 Te3 NPs arrays with planar surfaces or by chemical dissolution of the AAO templates to obtain freestanding Sb2 Te3 NPs forests. The illustrated growth method can be further scaled to smaller pore sizes and employed for other MOCVD-grown chalcogenide alloys and patterned substrates.
RESUMO
The paper reports on the feasibility of obtaining graphene nanomaterials with remarkable structural and chemical features from shungite rocks. The investigation of the composition and structural modifications induced in the pristine, natural C-containing mineraloid by a specifically designed physicochemical purification treatment is performed by a combined use of several techniques (scanning electron microscopy, high resolution transmission electron microscopy, X-ray diffraction, Raman and X-ray photoelectron spectroscopies). The adopted material processing enables efficient extraction of the C phase in the form of thin polycrystalline platelets of a few hundred nanometers sizes, and formed by 6-10 graphene sheets. About 80% of such nanostructures are characterized by a regular sp2 C honeycomb lattice and an ordered stacking of graphene layers with a d-spacing of â¼0.34 nm. The low oxygen content (â¼5%), mainly found in the form of hydroxyl functional groups, provides the graphene platelets (GP) with a chemistry strictly close to that of conventional rGO materials. Such a feature is supported by the high conductivity value of 1.041 × 103 S cm-1 found for pelletized GP, which can be considered a valuable active material for a wide spectrum of advanced applications.
RESUMO
It is demonstrated that boron-doped nanowires have predominantly long-term stable wurtzite phase while the majority of phosphorus-doped ones present diamond phase. A simplified model based on the different solubility of boron and phosphorus in gold is proposed to explain their diverse effectiveness in retaining the wurtzite phase. The wurtzite nanowires present a direct transition at the Γ point at approximately 1.5 eV while the diamond ones have a predominant emission around 1.1 eV. The aforementioned results are intriguing for innovative solar cell devices.
Assuntos
Boro/química , Nanofios/química , Energia Solar , Ouro/química , Humanos , Fósforo/química , Silício/químicaRESUMO
Macroalgae seaweeds such as Ulva lactuca and Gracilaria verrucosa cause problems on the northern coast of the Italian Adriatic Sea because their overabundance hinders the growth of cultivated clams, Rudatapes philippinarum. This study focused on the green synthesis of CuO nanoparticles from U. lactuca and G. verrucosa. The biosynthesized CuO NPs were successfully characterized using FTIR, XRD, HRTEM/EDX, and zeta potential. Nanoparticles from the two different algae species are essentially identical, with the same physical characteristics and almost the same antimicrobial activities. We have not investigated the cause of this identity, but it seems likely to arise from the reaction of Cu with the same algae metabolites in both species. The study demonstrates that it is possible to obtain useful products from these macroalgae through a green synthesis approach and that they should be considered as not just a cause of environmental and economic damage but also as a potential source of income.
RESUMO
Nearly every protein in the human body is modified with post-translational modifications (PTMs). PTMs affect proteins on many levels, including their function, interaction, half-life, and localization. Specifically, for histone proteins, PTMs such as lysine methylation and acetylation play essential roles in chromatin dynamic regulations. For this reason, methods to accurately detect and quantify PTMs are of paramount importance in cell biology, biochemistry, and disease biology. Most protein modifications are sub-stoichiometric, so, to be analyzed, they need methods of enrichment, which are mostly based on antibodies. Antibodies are produced using animals, resulting in high costs, ecological concerns, significant batch variations, and ethical implications. We propose using ferromagnetic nanoparticles functionalized with synthetic receptors, namely tetraphosphonate cavitands, as a tool for selective enrichment of methylated lysines present on histone tails. Before the enrichment step, histone proteins from calf thymus were digested to facilitate the recognition process and to obtain small peptides suitable for mass analyses. Cavitands were anchored on ferromagnetic nanoparticles to easily separate the PTM-peptides of interest from the rest of the proteolytic peptides. Our approach detects more modified peptides with higher signal intensity, rivaling commercial antibodies. This chemical strategy offers a cost-effective and efficient alternative for PTM detection, potentially advancing proteomic research.
RESUMO
InAs quantum wells (QWs) are promising material systems due to their small effective mass, narrow bandgap, strong spin-orbit coupling, large g-factor, and transparent interface to superconductors. Therefore, they are promising candidates for the implementation of topological superconducting states. Despite this potential, the growth of InAs QWs with high crystal quality and well-controlled morphology remains challenging. Adding an overshoot layer at the end of the metamorphic buffer layer, i.e., a layer with a slightly larger lattice constant than the active region of the device, helps to overcome the residual strain and provides optimally relaxed lattice parameters for the QW. In this work, we systematically investigated the influence of overshoot layer thickness on the morphological, structural, strain, and transport properties of undoped InAs QWs on GaAs(100) substrates. Transmission electron microscopy reveals that the metamorphic buffer layer, which includes the overshoot layer, provides a misfit dislocation-free InAs QW active region. Moreover, the residual strain in the active region is compressive in the sample with a 200 nm-thick overshoot layer but tensile in samples with an overshoot layer thicker than 200 nm, and it saturates to a constant value for overshoot layer thicknesses above 350 nm. We found that electron mobility does not depend on the crystallographic directions. A maximum electron mobility of 6.07 × 105 cm2/Vs at 2.6 K with a carrier concentration of 2.31 × 1011 cm-2 in the sample with a 400 nm-thick overshoot layer has been obtained.
RESUMO
The self-assembly of Ge(1)Sb(2)Te(4) nanowires (NWs) for phase change memories application was achieved by metal organic chemical vapor deposition, catalyzed by Au nanoislands in a narrow range of temperatures and deposition pressures. In the optimized conditions of 400 °C, 50 mbar, the NWs are Ge(1)Sb(2)Te(4) single hexagonal crystals. Phase change memory switching was reversibly induced by nanosecond current pulses through metal-contacted NWs with threshold voltage of about 1.35 V.
Assuntos
Cristalização/métodos , Gases/química , Metais/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Compostos Orgânicos/química , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Transição de Fase , Propriedades de SuperfícieRESUMO
Herein, following a circular economy approach, we present the synthesis of luminescent carbon dots via the thermal treatment of chestnut and peanut shells, which are abundant carbon-rich food industry by-products. As-synthesized carbon dots have excellent water dispersibility thanks to their negative surface groups, good luminescence, and photo-stability. The excitation-emission behaviour as well as the surface functionalization of these carbon dots can be tuned by changing the carbon source (chestnuts or peanuts) and the dispersing medium (water or ammonium hydroxide solution). Preliminary in vitro biological data proved that the samples are not cytotoxic to fibroblasts and can act as luminescent probes for cellular imaging. In addition, these carbon dots have a pH-dependent luminescence and may, therefore, serve as cellular pH sensors. This work paves the way towards the development of more sustainable carbon dot production for biomedical applications.
RESUMO
Unprecedented room temperature excitonic emissions are achieved from TiO(2) nanocrystals synthesized at 300 K by supersonic cluster beams. Transmission electron microscopy studies show the crystalline nature of the nanoparticles (NPs) with a diameter ranging from 5 to 30 nm. All the samples show mixed rutile and anatase phases as confirmed by Raman spectroscopy. XPS core level analyses evidence an O/Ti ratio of the as-grown nanoparticles of 2.30 ± 0.04. Two room temperature cathodoluminescence excitonic peaks observed at 3.16 and 3.25 eV are ascribed to the coexistence of rutile and anatase crystallographic phases respectively. Subsequent thermal treatments at 450 °C cause the complete quenching of the UV excitonic emissions and result in a more conventional broad visible band centered at 2.5 eV. HRTEM and XPS studies reveal that, after annealing, the NPs remain single crystals in nature with an O/Ti ratio of 2.20 ± 0.04. These results suggest a correlation between the emission properties and the oxygen concentration of our NPs. The achieved ability to tune the optical properties of TiO(2) nanoparticles is very promising for sensing and energy applications.
Assuntos
Nanopartículas/química , Temperatura , Titânio/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
INTRODUCTION: Acute flaccid myelitis (AFM) is a rare disease that affects spinal cord gray matter, results in acute flaccid weakness of one or more limbs and predominantly involves the cervical spinal cord, which places patients at higher risk for respiratory failure. Our study aims to describe respiratory failure in pediatric AFM patients with emphasis on the need for assisted ventilation and respiratory nerve involvement from an acute and long-term perspective. MATERIALS AND METHODS: We reviewed the medical records of patients diagnosed with AFM seen in a multidisciplinary clinic for persistent limb weakness between 2016 and 2020. RESULTS: We studied 54 patients, 35% were female. The median age of patients at illness onset was 5 years (range 7 months-19 years). The median age of patients at the time of study was 8.5 years (range 2-20 years). Eleven patients (20%) required assisted ventilation for acute respiratory failure. Of those that experienced acute respiratory failure, 81% developed chronic respiratory failure. Fifty-six percent of patients with chronic respiratory failure were able to wean off assisted ventilation by 1 year. All patients that experienced unilateral diaphragm impairment with AFM onset experienced acute and chronic respiratory failure. DISCUSSION: Many patients with AFM may experience respiratory compromise and develop chronic respiratory failure. However, most of these patients can be weaned off ventilatory support by 1 year from illness onset. Most children with unilateral diaphragm impairment can sustain adequate ventilation without the need for long-term ventilatory support.
Assuntos
Viroses do Sistema Nervoso Central , Mielite , Doenças Neuromusculares , Insuficiência Respiratória , Adolescente , Adulto , Viroses do Sistema Nervoso Central/complicações , Viroses do Sistema Nervoso Central/diagnóstico , Criança , Pré-Escolar , Feminino , Humanos , Lactente , Masculino , Mielite/diagnóstico , Mielite/etiologia , Doenças Neuromusculares/complicações , Doenças Neuromusculares/diagnóstico , Insuficiência Respiratória/etiologia , Insuficiência Respiratória/terapia , Adulto JovemRESUMO
Nitroaromatic explosives are the most common explosives, and their detection is important to public security, human health, and environmental protection. In particular, the detection of solid explosives through directly revealing the presence of their vapors in air would be desirable for compact and portable devices. In this study, amino-functionalized carbon nanotubes were used to produce resistive sensors to detect nitroaromatic explosives by interaction with their vapors. Devices formed by carbon nanotube networks working at room temperature revealed trinitrotoluene, one of the most common nitroaromatic explosives, and di-nitrotoluene-saturated vapors, with reaction and recovery times of a few and tens of seconds, respectively. This type of resistive device is particularly simple and may be easily combined with low-power electronics for preparing portable devices.
RESUMO
Antimony telluride (Sb2Te3) thin films were prepared by a room temperature Metal-Organic Chemical Vapor Deposition (MOCVD) process using antimony chloride (SbCl3) and bis(trimethylsilyl)telluride (Te(SiMe3)2) as precursors. Pre-growth and post-growth treatments were found to be pivotal in favoring out-of-plane and in-plane alignment of the crystallites composing the films. A comprehensive suite of characterization techniques were used to evaluate their composition, surface roughness, as well as to assess their morphology, crystallinity, and structural features, revealing that a quick post-growth annealing triggers the formation of epitaxial-quality Sb2Te3 films on Si(111).
RESUMO
Waste paper is an environmentally friendly source of cellulosic material. Here we propose a new treatment based on nanocrystalline cellulose (CNC) for paper preservation and consolidation. Suspensions of CNC were prepared by sulfuric acid hydrolysis using waste paper as cellulose source (CNCWP) and compared with CNC from cotton linter (CNCCL). Both CNCs were obtained with good yield, showing high crystallinity index and comparable morphology, as demonstrated by DLS-ELS, XRD, FTIR, Raman and TEM analyses. CNCs were mixed with silver nanoparticles (CNC/Ag) and their biocidal activity was tested against Escherichia coli and Bacillus subtilis, measuring the minimum inhibitory concentration. CNCs were exploited as treatments for biocidal activity and consolidation on Whatman paper. The presence of silver nanoparticles doesn't affect aesthetic appearance of the original paper and prevents the growth of Aspergillus niger fungus. Mechanical tests demonstrated that the coatings by CNC based products improve stretch and toughness of the paper support.
RESUMO
The thermodynamic quantities associated to the transformation of carbon in single-walled carbon nanotube (SWCNT) bundles to carbon in graphite were determined from 750 to 1015 K by a CaF2 solid electrolyte galvanic cell: (-) Mo | Cr3C2,CrF2,C'' | CaF2s.c. | Cr3C2,CrF2,C' | Mo (+). The trend with temperature of the electromotive force of the cell was found to be greatly dependent on temperature and fully reversible with it. The standard enthalpy DeltaH(T)(o) and entropy DeltaS(T)(o) changes are 7.1, 6.0, and 60.2 kJ mol(-1) and 8.6, 14.7, and 72.8 J K(-1) mol(-1) at 778, 883, and 975 K, respectively. This most likely correlates with the different arrangements and shapes of tubes that deviate from the ideal triangular closed packed structure of the SWCNT bundles. The constraints to the thermal expansion of bundles in the electrode containing them generated high internal pressures that were responsible for deformations of tube shape and lattice. Stable bundle states were formed that interconvert as a function of temperature. Comparative analyses by low angle XRD, microRaman, and HR-TEM of SWCNT bundles before and after experiments support this scenario. The cohesion energy and associated entropy changes are also reported for such states. The formation enthalpy of unbundled SWCNTs was calculated equal to 9.5 +/- 0.4 kJ mol(-1).
RESUMO
Metallic nanoparticles can be used to enhance optical absorption or emission in semiconductors, thanks to a strong interaction of collective excitations of free charges (plasmons) with electromagnetic fields. Herein we present direct imaging at the nanoscale of plasmon-exciton coupling in Au/ZnO nanostructures by combining scanning transmission electron energy loss and cathodoluminescence spectroscopy and mapping. The Au nanoparticles (~30 nm in diameter) are grown in-situ on ZnO nanotetrapods by means of a photochemical process without the need of binding agents or capping molecules, resulting in clean interfaces. Interestingly, the Au plasmon resonance is localized at the Au/vacuum interface, rather than presenting an isotropic distribution around the nanoparticle. On the contrary, a localization of the ZnO signal has been observed inside the Au nanoparticle, as also confirmed by numerical simulations.
RESUMO
One of the main limitations to the application of gold nanorods (Au NRs) as surface-enhanced Raman scattering (SERS) probes for in situ monitoring of chemical processes is their instability in oxidative environments. Oxidation induces progressive anisotropic shortening of the NRs, which are eventually dissolved once this process has been completed. This paper compares two types of Au NRs, obtained through different routes and characterized by similar aspect ratios but different sizes. The key factors influencing the resistance of Au NRs to oxidation were systematically investigated, showing that the reduction of free bromide species and the increase of the particle size allowed the NRs to maintain their stability under harsh environments for several weeks. The most stable Au NRs were also demonstrated to be highly efficient SERS substrates in a series of Raman experiments involving molecular probes, treated under either oxidizing or nonoxidizing conditions, which simulate the oxidation of organic pollutants in water. These hallmarks make these "stainless" Au NRs attractive tools for ultrasensitive diagnostic under real working conditions.
RESUMO
Silicon, the mainstay semiconductor in microelectronic circuitry, is considered unsuitable for optoelectronic applications owing to its indirect electronic band gap, which limits its efficiency as a light emitter. Here we show the light emission properties of boron-doped wurtzite silicon nanowires measured by cathodoluminescence spectroscopy at room temperature. A visible emission, peaked above 1.5 eV, and a near infra-red emission at 0.8 eV correlate respectively to the direct transition at the Γ point and to the indirect band-gap of wurtzite silicon. We find additional intense emissions due to boron intra-gap states in the short wavelength infra-red range. We present the evolution of the light emission properties as function of the boron doping concentration and the growth temperature.
RESUMO
The thermodynamic stability of onion-like carbon (OLC) nanostructures with respect to highly oriented pyrolytic graphite (HOPG) was determined in the interval 765-1030 K by the electromotive force (emf) measurements of solid electrolyte galvanic cell: (Low) Pt|Cr3C2,CrF2,OLC|CaF2s.c.|Cr3C2,CrF2,HOPG|Pt (High). The free energy change of transformation HOPGâ=âOLC was found positive below 920.6 K crossing the zero value at this temperature. Its trend with temperature was well described by a 3rd degree polynomial. The unexpected too high values of [Formula: see text] jointly to the HR-TEM, STEM and EELS evidences that showed OLC completely embedded in rigid cages made of a Cr3C2/CrF2 matrix, suggested that carbon in the electrodes experienced different internal pressures. This was confirmed by the evaluation under constant volume of [dP/dT by the α/κ ratio for OLC (0.5 MPa K(-1)) and HOPG (8 Pa K(-1)) where α and κ are the isobaric thermal expansion and isothermal compressibility coefficients, respectively. The temperature dependency of the pressure was derived and utilized to calculate the enthalpy and entropy changes as function of temperature and pressure. The highest value of the internal pressure experienced by OLC was calculated to be about 7 GPa at the highest temperature. At 920.6 K, ΔrH and ΔrS values are 95.8 kJ mol(-1) and 104.1 JK(-1) mol(-1), respectively. The surface contributions to the energetic of the system were evaluated and they were found negligible compared with the bulk terms. As a consequence of the high internal pressure, the values of the enthalpy and entropy changes were mainly attributed to the formation of carbon defects in OLC considered as multishell fullerenes. The change of the carbon defect fraction is reported as a function of temperature.
Assuntos
Carbono/química , Grafite/química , Temperatura Alta , Materiais Biocompatíveis , Nanoestruturas , TermodinâmicaRESUMO
UNLABELLED: Self-cleaning photocatalytic coatings for biocalcarenite stones, based on TiO2 nanoparticles obtained by sol-gel processes at different pH values and also adding gold particles, have been investigated. The selected test material is a biocalcarenite named "pietra di Lecce" (Lecce stone), outcropping in Southern Italy. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and Raman investigations were carried out to characterize the TiO2 nanoparticles and coatings. Nanocrystalline anatase and, to a lesser extent, brookite phases are obtained. Photocatalytic activity of the TiO2 sols and of the coatings on "pietra di Lecce" was assessed under ultraviolet irradiation, monitoring methyl orange (MeO) dye degradation as a function of time. To evaluate the harmlessness of the treatment, colorimetric tests and water absorption by capillarity were performed. The results show good photodegradation rates for titania nanosols, particularly when putting in Au particles, whereas a satisfactory chromatic compatibility between the sol and the surface of the calcarenite is found only without Au addition. HIGHLIGHTS: Sols of nanocrystalline titania at different pH values and with Au particles were prepared and characterized. Satisfactory photodegradation of MeO by the sols in solution and on calcarenite-coated surfaces is obtained. The addition of Au particles improves the photodegradation activity but gives poor chromatic results on "pietra di Lecce."
Assuntos
Materiais de Construção , Nanopartículas/química , Titânio/química , Compostos Azo/química , Catálise , Fenômenos Químicos , Materiais de Construção/efeitos da radiação , Cristalização , Ouro/química , Itália , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Fotólise , Difração de Raios XRESUMO
Further improvement of phase change memory devices based on Ge-Sb-Te alloys imposes the reduction of the active cell dimensions to the nanoscale. We investigate the atomic arrangement of Ge(1)Sb(2)Te(4) and Ge(2)Sb(2)Te(5) nanowires. We identify the stacking sequence in each crystal structure by combining the direct observation by High Angle Annular Dark Field imaging and proper simulations. We find out that Ge and Sb atoms randomly share the same lattice sites, although this configuration is considered not stable according to the existing theoretical models elaborated for the bulk material.