Improvement of physicochemical properties of lycopene by the self-assembly encapsulation of recombinant ferritin GF1 from oyster (Crassostrea gigas).

BACKGROUND: Lycopene (LYC), a carotenoid found in abundance in ripe red fruits, exhibits higher singlet oxygen quenching activity than other carotenoids. However, the stability of LYC is extremely poor due to its high double-bond content. In this paper, a nano-encapsulation strategy based on highly stable marine-derived ferritin GF1 nanocages was used to improve the thermal stability and oxidation resistance of LYC, thereby boosting its functional effectiveness and industrial applicability. RESULTS: The preparation of GF1-LYC nanoparticles benefited from the pH-responsive reversible self-assembly of GF1 to capture LYC molecules into GF1 cavities with a LYC-to-protein ratio of 51 to 1. After the encapsulation of the LYC, the reassembled GF1 nanocages maintained intact morphology and good monodispersity. The GF1-LYC nanoparticles incorporated the characteristic LYC peaks in spectrograms, and their powder form contained the crystalline form of LYC. Molecular docking revealed that LYC bound with the inner triple-axis channel areas of GF1, interacting with VAL139, LYS72, LYS65, TYR69, PHE129, HIS133, HIS62, and TYR134 amino acids through hydrophobic bonds. Fourier transform infrared spectroscopy also demonstrated the bonding of GF1 and LYC. In comparison with free LYC, GF1 reduced the thermal degradation of encapsulated LYC at 37 °C significantly and maintained the 2,2-Diphenyl-1-picrylhydrazyl (DPPH)-scavenging ability of LYC. CONCLUSION: As expected, the water solubility, thermal stability, and antioxidant capacity of encapsulated LYC from GF1-LYC nanoparticles was notably improved in comparison with free LYC, indicating that the shell-like marine ferritin nanoplatform might enhance the stable delivery of LYC and promote its utilization in the field of food nutrition and in other industries. © 2023 Society of Chemical Industry.

Microfluidized hemp protein isolate: an effective stabilizer for high-internal-phase emulsions with improved oxidative stability.

BACKGROUND: Hemp protein isolates (HPIs), which provide a well-balanced profile of essential amino acids comparable to other high-quality proteins, have recently garnered significant attention. However, the underutilized functional attributes of HPIs have constrained their potential commercial applications within the food and agriculture field. This study advocates the utilization of dynamic-high-pressure-microfluidization (DHPM) for the production of stable high-internal-phase emulsions (HIPEs), offering an efficient approach to fully exploit the potential of HPI resources. RESULTS: The findings underscore the effectiveness of DHPM in producing HPI as a stabilizing agent for HIPEs with augmented antioxidant activity. Microfluidized HPI exhibited consistent adsorption and anchoring at the oil-water interface, resulting in the formation of a dense and compact layer. Concurrently, the compression of droplets within HIPEs gave rise to a polyhedral framework, conferring viscoelastic properties and a quasi-solid behavior to the emulsion. Remarkably, HIPEs stabilized by microfluidized HPI demonstrated superior oxidative and storage stability, attributable to the establishment of an antioxidative barrier by microfluidized HPI particles. CONCLUSION: This study presents an appealing approach for transforming liquid oils into solid-like fats using HPI particles, all without the need for surfactants. HIPEs stabilized by microfluidized HPI particles hold promise as emerging food ingredients for the development of emulsion-based formulations with enhanced oxidative stability, thereby finding application in the food and agricultural industries. © 2023 Society of Chemical Industry.

Controlling the assembly of soy ß-conglycinin to fabricate heat-stable particles for high protein liquid systems.

BACKGROUND: Recently, there is a growing interest in developing protein-fortified liquid systems, which are formulated to provide special nutrient combinations to those with special dietary needs. The fabrication of heat-stable protein for protein-fortified liquid systems relies heavily on precise control of the edible protein-building process. RESULTS: Results suggested that heat-stable 7S protein particles (7SPPs) could be obtained by preheating at 100 °C for an extended time, whereas 7S proteins with better gelling properties were discovered after preheating at lower temperatures. According to the findings of the protein conformational and morphological characterization, the 7SPPs showed rather stable tertiary and secondary structures as well as size distributions, which might be responsible for their heat stability. Additionally, during the reheating test, suspensions of 7SPPs showed no signs of gelation and had a low viscosity even though the protein content was as high as 120 mg mL-1 . However, 7S proteins with improved gelling properties were found to show rising aggregate size, higher susceptibility and larger conformational structure changing rates upon reheating treatment. CONCLUSION: Soy ß-conglycinin (7S) proteins with tunable heat stability were successfully prepared by preheating 10 mg mL-1 protein dispersions at various temperatures (80-120 °C) and durations (15-120 min). These findings provide fundamental insights for developing 7S-based protein-fortified systems. © 2023 Society of Chemical Industry.

Fabrication of glycated yeast cell protein via Maillard reaction for delivery of curcumin: improved environmental stability, antioxidant activity, and bioaccessibility.

BACKGROUND: The application of curcumin (CUR) in the food industry is limited by its instability, hydrophobicity and low bioavailability. Yeast cell protein (YCP) is a by-product of spent brewer's yeast, which has the potential to deliver bioactive substances. However, the environmental stresses such as pH, salt and heat treatment has restricted its application in the food industry. Maillard reaction as a non-enzymatic browning reaction can improve protein stability under environmental stress. RESULTS: The CUR was successfully encapsulated into the hydrophobic core of YCP/glycated YCP (GYCP) and enhanced by hydrogen bonding, resulting in static fluorescence quenching of YCP/GYCP. The average diameter and dispersibility of GYPC-CUR nanocomplex were significantly improved after glucose glycation (121.40 nm versus 139.70 nm). Moreover, the encapsulation capacity of CUR was not influenced by glucose glycation. The oxidative stability and bioaccessibility of CUR in nanocomplexes were increased compared with free CUR, especially complexed with GYCP conjugates. CONCLUSION: Steric hindrance provided by glucose conjugation improved the enviriomental stability, oxidative activity and bioaccessibility of CUR in nanocomplexes. Thus, glucose-glycated YCP has potential application as a delivery carrier for hydrophobic compounds in functional foods. © 2022 Society of Chemical Industry.

Construction of Glycogen-Based Nanoparticles Loaded with Resveratrol for the Alleviation of High-Fat Diet-Induced Nonalcoholic Fatty Liver Disease.

The purpose of this study was to construct a glycogen (Gly)-based nanoparticle (NP) with liver-targeted and redox response to effectively deliver resveratrol (Res) for improving nonalcoholic fatty liver disease (NAFLD). Herein, Gly was modified using α-lipoic acid (α-LA) and lactobionic acid (Lac) to obtain an amphiphilic polymer (Gly-LA-Lac), which was self-assembled in water and then encapsulated in Res to form Res NPs with excellent stability. As expected, the Res NPs exhibited liver-targeted and redox response release behavior. In vitro cell studies demonstrated that the nanocarrier treatment enhanced the cellular uptake of Res and reduced oxidative stress and inflammatory factor levels. Meanwhile, the in vivo tests proved that the nanocarriers effectively reduced hepatic lipid accumulation and oxidative stress levels via regulating the TLR4/NF-κB signal pathway to improve liver damage in NAFLD mice. In conclusion, this study provides a promising strategy through the construction of Gly-based nanocarriers for the encapsulation of Res to effectively alleviate the process of NAFLD.

Advancement of food-derived mixed protein systems: Interactions, aggregations, and functional properties.

Recently, interests in binary protein systems have been developed considerably ascribed to the sustainability, environment-friendly, rich in nutrition, low cost, and tunable mechanical properties of these systems. However, the molecular coalition is challenged by the complex mechanisms of interaction, aggregation, gelation, and emulsifying of the mixed system in which another protein is introduced. To overcome these fundamental difficulties and better modulate the structural and functional properties of binary systems, efforts have been steered to gain basic information regarding the underlying dynamics, theories, and physicochemical characteristics of mixed systems. Therefore, the present review provides an overview of the current studies on the behaviors of proteins in such systems and highlights shortcomings and future challenges when applied in scientific fields.

Effects of Limited Hydrolysis and High-Pressure Homogenization on Functional Properties of Oyster Protein Isolates.

In this study, the effects of limited hydrolysis and/or high-pressure homogenization (HPH) treatment in acid conditions on the functional properties of oyster protein isolates (OPI) were studied. Protein solubility, surface hydrophobicity, particle size distribution, zeta potential, foaming, and emulsifying properties were evaluated. The results showed that acid treatment led to the dissociation and unfolding of OPI. Subsequent treatment such as limited proteolysis, HPH, and their combination remarkably improved the functional properties of OPI. Acid treatment produced flexible aggregates, as well as reduced particle size and solubility. On the contrary, limited hydrolysis increased the solubility of OPI. Furthermore, HPH enhanced the effectiveness of the above treatments. The emulsifying and foaming properties of acid- or hydrolysis-treated OPI significantly improved. In conclusion, a combination of acid treatment, limited proteolysis, and HPH improved the functional properties of OPI. The improvements in the functional properties of OPI could potentiate the use of oyster protein and its hydrolysates in the food industry.

Bioactive hydrolysates from casein: generation, identification, and in silico toxicity and allergenicity prediction of peptides.

BACKGROUND: Bioactive casein peptides have attracted considerable attention for their applications in industry. However, there is little clarity regarding mass spectrometric profiles for peptides in enzymatic hydrolysates of casein produced under varying conditions. In this study, the compositions of the peptides from casein hydrolysates were compared for different enzyme/substrate ratio (E/S) and hydrolysis times. The toxicity, allergenicity and bioactivity of the identified peptides were assessed in silico. RESULTS: A total of 70 unique peptides were identified, and there were 28, 21, 13 and 8 peptides from αs1 -casein, αs2 -casein, ß-casein and κ-casein respectively. The peptide number decreased with the increase in E/S and hydrolysis time. Moreover, peptides with relative molecular mass Mr ranging from 1000 to 1500 Da occupied the highest proportion of 31.43%, and almost all of the peptides showed Mr less than 5000 Da. In silico analysis showed that all of the peptides were non-toxic and non-allergenic, and several of them were assessed by PeptideRanker as having a relatively high likelihood of being bioactive peptides. CONCLUSIONS: Composition of the peptides in the casein hydrolysates varied with the enzymolysis conditions. This study's results may facilitate the production of target bioactive peptides by controlling E/S and hydrolysis time, which is beneficial for the application of casein peptides in the functional food industry. © 2017 Society of Chemical Industry.

Molecular cloning and functional characterization of cathepsin D from sea cucumber Apostichopus japonicus.

Cathepsin D (CTSD, EC 3.4.23.5) belongs to aspartic protease family, which is located in lysosomes and is distributed in diverse tissues and cells. CTSD has a wide variety of physiological functions, owing to its proteolytic activity in degradating proteins and peptides. In the current study, the full length cDNA of sea cucumber (Apostichopus japonicus) cathepsin D (AjCTSD) was firstly cloned, then the association between AjCTSD and sea cucumber autolysis was investigated. The full length cDNA of AjCTSD was 2896 bp, with an open reading frame (ORF) for 391 amino acids. AjCTSD was widely expressed in body wall, muscle and intestine; the expression level was the highest in intestine, followed by muscle and body wall. Compared to fresh tissues, AjCTSD expression levels were significantly increased in all examined autolytic tissues. The purified recombinant AjCTSD promoted the degradation of sea cucumber muscle. In conclusion, AjCTSD contributed to sea cucumber muscle autolysis.

The effect of pH and amino acids on the formation of methylglyoxal in a glucose-amino acid model system.

BACKGROUND: Methylglyoxal (MGO) as a α-dicarbonyl compound not only affects food flavor and color but also contributes to the loss of nutrition and the generation of toxic compounds. The study was carried out using a glucose-amino acid model system with incubation at 120 °C to investigate the effect of amino acids and pH on the formation of MGO. MGO derivative (2-methylquinoxaline) was detected by high-performance liquid chromatography with a diode array detector. Changes in glucose, amino acids and products such as acetic acid were tested using high-performance anion exchange chromatography with an electrochemical detector or an electrical conductivity detector. RESULTS: Lysine and glycine had higher reactivity to form MGO and melanoidins than arginine and proline. More acetic acid was produced and a higher consumption of arginine was observed in glucose-arginine solution. Moreover, higher pH significantly accelerated the formation of MGO. CONCLUSION: Amino reactivity and pH were two important factors affecting the formation of MGO in the Maillard reaction. © 2016 Society of Chemical Industry.

Short communication: Amino trap column improves the separation of methylimidazoles, 5-hydroxymethyl-2-furaldehyde, and sugars in Maillard reaction.

A simultaneous analysis of methylimidazoles, reducing sugars, and 5-hydroxymethyl-2-furaldehyde in the Maillard reaction was improved by use of an amino trap column. Analysis was carried out by using high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) coupled with an amino trap column. The amino trap column was a useful tool to improve the separation of methylimidazoles, reducing sugars, and 5-hydroxymethyl-2-furaldehyde. This technique is useful for simultaneous analysis of methylimidazoles, reducing sugars, and 5-hydroxymethyl-2-furaldehyde in risk assessment for dairy products.

Unveiling the critical pH values triggering the unfolding of soy 7S and 11S globulins and enhancing their encapsulation efficiency.

The pH-shifting process is an effective encapsulation method, and it is typically performed at extreme alkaline pH, which severely limits the application. In this study, we found that there were critical pH for the unfolding proteins during pH-shifting from 7 to 12, and upon the critical pH, physiochemical characteristics of protein greatly changed, leading to a sharp increase of encapsulation of hydrophobic actives. Firstly, the critical pH for ß-conglycinin (7S) or Glycinin (11S) unfolding was determined by multispectral technology. The critical pH for 7S and 11S were 10.5 and 10.3, respectively. The encapsulation efficiency (EE) obtained by ß-conglycinin-curcumin nanocomposite (7S-Cur) (88.80 %) and Glycinin-curcumin nanocomposite (11S-Cur) (88.38 %) at critical pH was significantly higher than that obtained by pH 7 (7S-Cur = 16.66 % and 11S-Cur = 15.78 %), and both values were close to EE obtained by at 12 (7S-Cur = 95.16 % and 11S-Cur = 94.63 %). The large-scale application of hydrophobic functional compounds will be enhanced by the experimental results.

Highly Effective Nobiletin-MPN in Yeast Microcapsules for Targeted Modulation of Oxidative Stress, NLRP3 Inflammasome Activation, and Immune Responses in Ulcerative Colitis.

Inflammatory bowel disease (IBD) etiology is intricately linked to oxidative stress and inflammasome activation. Natural antioxidant nobiletin (NOB) contains excellent anti-inflammatory properties in alleviating intestinal injury. However, the insufficient water solubility and low bioavailability restrict its oral intervention for IBD. Herein, we constructed a highly efficient NOB-loaded yeast microcapsule (YM, NEFY) exhibiting marked therapeutic efficacy for dextran sulfate sodium (DSS)-induced ulcerative colitis (UC) at a low oral dose of NOB (20 mg/kg). We utilized the metal polyphenol network (MPN) formed by self-assembly of epigallocatechin gallate (EGCG) and FeCl3 as the intermediate carrier to improve the encapsulation efficiency (EE) of NOB by 4.2 times. These microcapsules effectively alleviated the inflammatory reaction and oxidative stress of RAW264.7 macrophages induced by lipopolysaccharide (LPS). In vivo, NEFY with biocompatibility enabled the intestinal enrichment of NOB through controlled gastrointestinal release and macrophage targeting. In addition, NEFY could inhibit NLRP3 inflammasome and balance the macrophage polarization, which favors the complete intestinal mucosal barrier and recovery of colitis. Based on the oral targeted delivery platform of YM, this work proposes a novel strategy for developing and utilizing the natural flavone NOB to intervene in intestinal inflammation-related diseases.

Heat-induced agglomeration of water-soluble cod proteins toward gelled structures.

Cod proteins (CPs) have potential applications in designing desirable gel-based products, and this study aimed to unravel their heat-induced aggregation pattern and further probe the roles in protein gels. SDS-PAGE analysis indicated that high-precipitation-coefficient aggregates (HPCAs) of CPs aggregates were composed of considerable polymers of myosin heavy chains and actin, and their low-precipitation-coefficient aggregates (LPCAs) contained myosin light chains and tropomyosin. Studies from correlation analysis between the structure and aggregation kinetics revealed that the generation of ß-sheet and SS bonds were responsible for their spontaneous thermal aggregation induced by heating temperature and protein concentration, respectively. Additionally, as protein denaturation ratio increased, more and larger HPCAs were formed, which was evidenced driving the network formation of protein gels and resulting in higher storage modulus (G') values. These novel findings may be applicable to other animal proteins for better tailoring the manufacturing of muscle gel-based products.

Construction of Manganese-Based Oyster (Crassostrea gigas) Ferritin Nanozyme with Catalase-like Enzyme Activity.

MnO2 is a nanozyme that inhibits the decomposition of hydrogen peroxide (H2O2) into a hydroxyl radical (OH•), thus preventing its conversion into reactive oxygen species (ROS). Oyster ferritin (GF1) is a macromolecular protein that provides uniform size and high stability and serves as an excellent template for the biomineralization of nanozyme. This study presents a unique method in which MnO2 is grown in situ in the GF1 cavity, yielding a structurally stable ferritin-based nanozyme (GF1@Mn). GF1@Mn is demonstrated to be stable at 80 °C and pH 4-8, exhibiting a higher affinity with H2O2 than many other catalases (CAT) with a Michaelis constant (Km) of 25.45 mmol/L. In vitro experiments have demonstrated the potential of GF1@Mn to enhance cell survival by reducing nitric oxide (NO) production while mitigating macrophage damage from ROS. The findings are essential to developing ferritin-based nanozymes and hold great potential for applications in functional food development.

Theory and protocol of dual mode unity solid-phase microextraction.

The solid-phase microextraction (SPME) bias problem limits comprehensive analysis of volatile compounds in real samples. The study introduces dual mode unity solid-phase microextraction (DMU-SPME) as a novel SPME mode to achieve balanced extraction of both volatile and low-volatile compounds. The DMU-SPME method exhibits excellent linearity (R2 ≥ 0.994), low quantitation limits (0.12-240 µg/L), and notable stability (relative standard deviations below 20 % for both intra-day and inter-day analyses). In practical application to soy sauce, the DMU-SPME method identified a total of 107 compounds, encompassing all those detected by both headspace solid-phase microextraction (HS-SPME) and direct immersion solid-phase microextraction (DI-SPME). Theoretical insights indicate that DMU-SPME is less influenced by Kfs0 and Kfs in comparison to HS/DI-SPME, rendering it suitable for complex matrices containing both volatile and low-volatile compounds. In conclusion, DMU-SPME emerges as a highly effective extraction mode for analyzing volatile and low-volatile compounds in food, medical, and environmental samples.

Constructing a strongly interacting Pea-Cod binary protein system by introducing metal cations toward enhanced gelling properties.

Developing prospective plant-animal binary protein systems with desirable nutritional and rheological properties stands as a significant and challenging pursuit within the food industry. Our understanding of the effect of adding salt on the aggregation behavior of food proteins is currently based on single model protein systems, however, this knowledge is rather limited following binary protein systems. Herein, various ionic strength settings are used to mitigate the repulsive forces between pea-cod mixed proteins during the thermal process, which further benefits the construction of a strengthened gel network. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) collectively demonstrated that larger heat-induced protein aggregates were formed, which increased in size with higher ionic strength. In the presence of 2.5 mM CaCl2 and 50 mM NaCl, the disulfide bonds significantly increased from 19.3 to 27.53 and 30.5 µM/g, respectively. Notably, similar aggregation behavior could be found when introducing 2.5 mM CaCl2 or 25 mM NaCl, due to the enhanced aggregation tendency by specific binding of Ca2+ to proteins. With relevance to the strengthened cross-links between protein molecules, salt endowed composite gels with preferable gelling properties, evidenced by increased storage modulus. Additionally, the gelling temperature of mixed proteins decreased below 50 °C at elevated ionic strength. Simultaneously, the proportion of network proteins in composite gels increased remarkably from 82.05 % to 93.61 % and 92.31 % upon adding 5.0 mM CaCl2 and 100 mM NaCl, respectively. The findings provide a valuable foundation for designing economically viable and health-oriented plant-animal binary protein systems.

The gelling properties of fish gelatin as improved by ultrasound-assisted phosphorylation.

This study investigated the effects of ultrasound-assisted phosphorylation on gelling properties of fish gelatin (FG). Ultrasound-assisted phosphorylation (UP) for 60, 90, and 120 min resulted in >6.54% increase of phosphorylation degree and decreased zeta potential of FG. Atomic force microscopy revealed that UP-FGs showed larger aggregates than P-FGs (normal phosphorylation FGs). Low frequent-NMR and microstructure analysis revealed that phosphorylation enhanced water-binding capability of FG and improved the gel networks. However, UP60 had the highest gel strength (340 g), gelling (17.96 °C) and melting (26.54 °C) temperature while UP90 and UP120 showed slightly lower of them. FTIR analysis indicated thatß-sheet and triple helix content increased but random coil content decreased in phosphorylated FGs. Mass spectrometry demonstrated phosphate groups mainly bound to serine, threonine and tyrosine residues of FG and UP-FG exhibited more phosphorylation sites. The study showed that mild phosphorylation (UP60) could be applied to improve FG gel properties.

One-step spraying of protein-anchored chitosan oligosaccharide antimicrobial coating for food preservation.

The persistent global issues of unsafe food and food waste continue to exist. Microbial contamination stands out as a major cause of losses in perishable foods like vegetables and fruits. Herein, we report a self-assembling coating based on disulfide bond cleavage-induced bovine serum albumin (BSA), where the antimicrobial activity of chitosan oligosaccharide (COS) is stably anchored in the coating by electrostatic interactions during the unfolding-aggregation phase of BSA. The intrinsic antimicrobial activity of COS, combined with the positively charged and hydrophobic regions enriched on the BSA coating, significantly disrupts the integrity of bacterial structures. Furthermore, the BSA@COS coating can easily adhere in situ to the grooves on the surface of strawberries through a simple one-step spraying process, extending the shelf life of strawberries and bananas by nearly three times. This makes it a potential economic alternative to current commercial antimicrobial coatings, offering a solution to the rampant global issue of food waste.

Soy protein particles as stabilizers of heat-stable O/W emulsions with 20% protein content.

In response to the increasing demand for nutritionally rich foods, consumer preference for protein-enriched beverages has grown. However, heat-induced protein aggregation and gelation significantly hinders the production of high-protein drinks. In this study, oil-in-water (O/W) emulsions with exceptional thermal stability were formulated using modified soy protein particles (MSPs). These MSPs effectively resisted gel formation, even at a protein concentration of up to 20% (w/v). In contrast, emulsions prepared with untreated soy proteins (SPs) experienced pronounced gelation under identical conditions. The compact structure of MSPs, in comparison to SPs, imparted resistance to heat-induced denaturation and aggregation. Additionally, the emulsion displayed heightened heat processing insensitivity, due to the enhanced hydrophobicity of MSPs and their rapid adsorption at the oil-water interface, resulting in a denser, more elastic, and resilient interfacial film. These findings provide practical insights for the formulation of protein-rich milk alternatives, meeting the evolving market demands.