Highly Efficient Piezoelectrets through Ultra-Soft Elastomeric Spacers.
Polymers (Basel)
; 13(21)2021 Oct 29.
Article
en En
| MEDLINE
| ID: mdl-34771310
ABSTRACT
Piezoelectrets are artificial ferroelectrics that are produced from non-polar air-filled porous polymers by symmetry breaking through high-voltage-induced Paschen breakdown in air. A new strategy for three-layer polymer sandwiches is introduced by separating the electrical from the mechanical response. A 3D-printed grid of periodically spaced thermoplastic polyurethane (TPU) spacers and air channels was sandwiched between two thin fluoroethylene propylene (FEP) films. After corona charging, the air-filled sections acted as electroactive elements, while the ultra-soft TPU sections determined the mechanical stiffness. Due to the ultra-soft TPU sections, very high quasi-static (22,000 pC N-1) and dynamic (7500 pC N-1) d33 coefficients were achieved. The isothermal stability of the d33 coefficients showed a strong dependence on poling temperature. Furthermore, the thermally stimulated discharge currents revealed well-known instability of positive charge carriers in FEP, thereby offering the possibility of stabilization by high-temperature poling. The dependences of the dynamic d33 coefficient on seismic mass and acceleration showed high coefficients, even at accelerations approaching that of gravity. An advanced analytical model rationalizes the magnitude of the obtained quasi-static d33 coefficients of the suggested structure indicating a potential for further optimization.
Texto completo:
1
Colección:
01-internacional
Banco de datos:
MEDLINE
Idioma:
En
Revista:
Polymers (Basel)
Año:
2021
Tipo del documento:
Article
País de afiliación:
Alemania