Enhancing ozone catalytic decomposition through acid treatment of α-MnO2 for improved activity and humidity resistance.

Post-etching method using dilute acid solutions is an effective technology to modulate the surface compositions of metal-oxide catalysts. Here the α-MnO2 catalyst treated with 0.1 mol/L nitric acid exhibits higher ozone decomposition activity at high relative humidity than the counterpart treated with acetic acid. Besides the increases in surface area and lattice dislocation, the improved activity can be due to relatively higher Mn valence on the surface and newly-formed Brønsted acid sites adjacent to oxygen vacancies. The remnant nitro species deposited on the catalyst by nitric acid treatment is ideal hydrophobic groups at ambient conditions. The decomposition route is also proposed based on the DRIFTS and DFT calculations: ozone is facile to adsorb on the oxygen vacancy, and the protonic H of Brønsted acid sites bonds to the terminal oxygen of ozone to accelerate its cleavage to O2, reducing the reaction energy barrier of O2 desorption.

Relative humidity-dependent evolution of molecular composition of α-pinene secondary organic aerosol upon heterogeneous oxidation by hydroxyl radicals.

Heterogeneous oxidation by gas-phase oxidants is an important chemical transformation pathway of secondary organic aerosol (SOA) and plays an important role in controlling the abundance, properties, as well as climate and health impacts of aerosols. However, our knowledge on this heterogeneous chemistry remains inadequate. In this study, the heterogeneous oxidation of α-pinene ozonolysis SOA by hydroxyl (OH) radicals was investigated under both low and high relative humidity (RH) conditions, with an emphasis on the evolution of molecular composition of SOA and its RH dependence. It is found that the heterogeneous oxidation of SOA at an OH exposure level equivalent to 12 hr of atmospheric aging leads to particle mass loss of 60% at 25% RH and 95% at 90% RH. The heterogeneous oxidation strongly changes the molecular composition of SOA. The dimer-to-monomer signal ratios increase dramatically with rising OH exposure, in particular under high RH conditions, suggesting that aerosol water stimulates the reaction of monomers with OH radicals more than that of dimers. In addition, the typical SOA tracer compounds such as pinic acid, pinonic acid, hydroxy pinonic acid and dimer esters (e.g., C17H26O8 and C19H28O7) have lifetimes of several hours against heterogeneous OH oxidation under typical atmospheric conditions, which highlights the need for the consideration of their heterogeneous loss in the estimation of monoterpene SOA concentrations using tracer-based methods. Our study sheds lights on the heterogeneous oxidation chemistry of monoterpene SOA and would help to understand their evolution and impacts in the atmosphere.

Co-doped cryptomelane-type manganese oxide in situ grown on a nickel foam substrate for high humidity ozone decomposition.

Monolithic catalysts with excellent O3 catalytic decomposition performance were prepared by in situ loading of Co-doped KMn8O16 on the surface of nickel foam. The triple-layer structure with Co-doped KMn8O16/Ni6MnO8/Ni foam was grown spontaneously on the surface of nickel foam by tuning the molar ratio of KMnO4 to Co(NO3)2·6H2O precursors. Importantly, the formed Ni6MnO8 structure between KMn8O16 and nickel foam during in situ synthesis process effectively protected nickel foam from further etching, which significantly enhanced the reaction stability of catalyst. The optimum amount of Co doping in KMn8O16 was available when the molar ratio of Mn to Co species in the precursor solution was 2:1. And the Mn2Co1 catalyst had abundant oxygen vacancies and excellent hydrophobicity, thus creating outstanding O3 decomposition activity. The O3 conversion under dry conditions and relative humidity of 65%, 90% over a period of 5 hr was 100%, 94% and 80% with the space velocity of 28,000 hr-1, respectively. The in situ constructed Co-doped KMn8O16/Ni foam catalyst showed the advantages of low price and gradual applicability of the preparation process, which provided an opportunity for the design of monolithic catalyst for O3 catalytic decomposition.

Effect of temperature on rehydration and fracture resistance of reattached tooth fragments after crown fracture: An in vitro study.

BACKGROUND: Uncomplicated crown fractures of maxillary anterior teeth are common dental injuries, and the bonding of fractured fragments is recommended for management. Rehydration of fragments improves bonding and fracture resistance. Therefore, the aim of this study was to compare the fracture resistance of the reattached tooth fragment of the incisor crown after rehydration using either a steamer or a humidifier. MATERIALS AND METHODS: Bovine teeth were used as a model. Fractured fragments were divided into three groups: Group I (no rehydration), Group II (rehydration by humidifier), and Group III (rehydration by steamer). Fragments were reattached using a standard bonding protocol. Fracture resistance was tested using a universal testing machine. Statistical analysis was performed using analysis of variance and Chi-square tests. RESULTS: The force required to fracture the reattached fragments was significantly higher in Group II (humidifier) compared to Group I (no rehydration) (P = 0.005). Group III (steamer) had a force value similar to Group I, indicating no significant improvement in fracture resistance with steamer rehydration. The temperature inside the steam-based chamber reached an average of 95.7°C with 95% humidity, whereas the conventional humidification chamber had an average temperature of 39.2°C and 84% humidity. CONCLUSION: Within the limitations of the present study, the rehydration protocol using a steam-based chamber was found to have a significantly lower force required to fracture the reattached fragments as compared to humidifier-based chamber. This was not significantly different from the fragments which were reattached without rehydration.

Pretreatment method for oxygen stable isotope ratio analysis of the sugar-rich fraction in fruit juice via isotope ratio mass spectrometry.

RATIONALE: The oxygen stable isotope ratio (δ18O) of the sugar-rich fraction of fruit juice is important as a tracer of the geographical origin of raw material. This study sought to minimize the inter-day variation of δ18O attributable to the influence of water to accurately monitor geographical origin labeling. METHODS: Two drying devices (freeze dryer and vacuum oven) were compared. Then, two humidity levels (normal and low humidity) at which the samples were placed after drying were compared. The low-humidity environment was constructed using a glove bag and pure argon gas. δ18O was measured using thermal conversion elemental analyzer/isotope ratio mass spectrometry. Improvements were made to the measurement method based on aforementioned analyses results, and the performance of the initial and improved methods was compared. RESULTS: δ18O of juice dried in a vacuum oven was 3.30‰ lower than that of juice dried in a freeze dryer. Moreover, δ18O of juice samples exposed to normal humidity was 3.74‰ lower than that of samples exposed to low humidity. The combined inter-day and intra-day standard deviation was reduced from 1.20‰ in the initial method to 0.42‰ in the improved method. CONCLUSIONS: This study describes a pretreatment method for δ18O measurement in the sugar-rich fraction of fruit juice with less inter-day variation, and it will be useful for monitoring geographical origin labeling.

Impact of heat stress during close-up dry period on performance, fertility and immunometabolic blood indices of dairy cows: prospective cohort study.

This study aimed to investigate whether heat stress, as defined by the temperature-humidity index (THI) during the close-up dry period, had any impact on the productive performance, fertility, and immunometabolic blood indices of dairy cows in the subsequent lactation. Lactation performance was associated with increasing THI values on - 21, - 14, and - 7 d before calving resulting in decreased milk yield by about 2.30, 2.60, and 2.90 kg, respectively. The THI on the - 7 d before the calving was negatively associated with fertility parameters such as delayed first estrus postpartum, an elongated calving interval by approximately 32 d, a higher number of services per conception by 1.00, and an elongated artificial insemination service period, days open, and inter-calving period by about 20, 52, and 52 d, respectively. The study found that the immunometabolic blood indices were associated with increasing THI values during the close-up dry period. The study showed that exposing dairy cows to close-up dry period heat stress had negative consequences on performance, fertility, and immunometabolic blood indices in the subsequent lactation. Therefore, it is recommended that herd management and barn microclimate changes be implemented earlier, starting from the late dry period, to mitigate the negative impact of heat stress.

Association between periodic variation of air temperature, humidity, atmospheric pressure and hospital admissions for acute occlusive mesenteric ischaemia.

Referring to the intestinal ischemic injury caused by sudden interruption of the blood supply, acute mesenteric ischemia (AMI) is a highly fatal emergency with mortality rates varying from 58 to 80%. The aim of this study was to explore the effect of temperature on AMI admission. This was a retrospective, multicentric study. The medical records of 1477 patients with verified AMI who were consecutively admitted to 3 hospitals anytime between January 2010 and December 2020 were included in the study. Distributed lag non-linear model was applied, the model was adjusted for temperature, atmospheric pressure, relative humidity, year, holiday, day of the week, time and seasonality. AMI exhibited obvious sex preference, AMI patients tended to be male (M/F ratio = 2.3:1) and in their late 50 s. Hospital admissions of acute mesenteric arterial thromboembolism (AMAT) increased significantly with high temperatures on day of exposure and lag 0-14 day. The effect curve of daily average temperature on acute mesenteric venous thromboembolism (AMVT) admission was J-shaped, and the duration of cold effect was longer, while the duration of heat effect was shorter. An increase in hospital admissions of AMVT was found above 20 °C at lag 0-30. For the first time, our study indicated that temperature is significantly associated with the risk of AMI. Although it is not possible to always avoid exposure to extreme temperatures, one should be aware of dramatic temperature fluctuations and take appropriate precautions.

Predicting how varying moisture conditions impact the microbiome of dust collected from the International Space Station.

BACKGROUND: The commercialization of space travel will soon lead to many more people living and working in unique built environments similar to the International Space Station, which is a specialized closed environment that contains its own indoor microbiome. Unintended microbial growth can occur in these environments as in buildings on Earth from elevated moisture, such as from a temporary ventilation system failure. This growth can drive negative health outcomes and degrade building materials. We need a predictive approach for modeling microbial growth in these critical indoor spaces. RESULTS: Here, we demonstrate that even short exposures to varying elevated relative humidity can facilitate rapid microbial growth and microbial community composition changes in dust from spacecraft. We modeled fungal growth in dust from the International Space Station using the time-of-wetness framework with activation and deactivation limited growth occurring at 85% and 100% relative humidity, respectively. Fungal concentrations ranged from an average of 4.4 × 106 spore equivalents per milligram of dust in original dust with no exposure to relative humidity to up to 2.1 × 1010 when exposed to 100% relative humidity for 2 weeks. As relative humidity and time-elevated increased, fungal diversity was significantly reduced for both alpha (Q < 0.05) and beta (R2 = 0.307, P = 0.001) diversity metrics. Bacteria were unable to be modeled using the time-of-wetness framework. However, bacterial communities did change based on constant relative humidity incubations for both beta (R2 = 0.22, P = 0.001) and alpha diversity decreasing with increasing moisture starting at 85% relative humidity (Q < 0.05). CONCLUSION: Our results demonstrate that moisture conditions can be used to develop and predict changes in fungal growth and composition onboard human-occupied spacecraft. This predictive model can be expanded upon to include other spacecraft environmental factors such as microgravity, elevated carbon dioxide conditions, and radiation exposure. Understanding microbial growth in spacecraft can help better protect astronaut health, fortify spacecraft integrity, and promote planetary protection as human activity increases in low-Earth orbit, the moon, Mars, and beyond. Video Abstract.

Unveiling the Role of Hydrophobicity on Multilayer Carbon Nanosheets Enriched in sp2-Carbon for Toluene Adsorption under Humid Conditions.

Carbon materials are regarded as a promising adsorbent for the adsorption of volatile organic compounds (VOCs). However, their adsorption behaviors are usually compromised at ambient conditions, attributed to the competitive VOCs adsorption with water vapor. In this study, we demonstrated that the selectivity for toluene than water of carbon can be effectively enhanced by introducing more sp2-carbon with two-dimensional nanosheets stacked. The multilayer carbon nanosheets enriched with sp2-carbon (CNS-MCA) exhibit a 151° H2O-contact angle, indicating hydrophobicity. Dynamic adsorption behaviors revealed that CNS-MCA retain 71% of their toluene adsorption capacity (91 mg/g) even at 60% relative humidity. Density functional theory (DFT) calculations, static adsorption studies, in situ Raman spectroscopy, and time-resolved in situ nuclear magnetic resonance (NMR) spectroscopy collectively indicate that toluene exhibits enhanced adsorption and selectivity due to π-π* interactions between its aromatic rings and the sp2-carbon. Conversely, water adsorption is attenuated, attributed to the reduced availability of surface-exposed hydrogen bonds associated with sp2-carbon and the inherent hydrophobic nature of multilayer graphene. This study extends a novel solution for the enhancement of VOCs adsorption under humid conditions.

Functional dissection of mosquito humidity sensing reveals distinct Dry and Moist Cell contributions to blood feeding and oviposition.

Aedes aegypti mosquitoes are major vectors of dengue, chikungunya, and other arboviral diseases. Ae. aegypti's capacity to reproduce and to spread disease depends on the female mosquitoes' ability to obtain blood meals and find water-filled containers in which to lay eggs (oviposit). While humidity sensation (hygrosensation) has been implicated in these behaviors, the specific hygrosensory pathways involved have been unclear. Here, we establish the distinct molecular requirements and anatomical locations of Ae. aegypti Dry Cells and Moist Cells and examine their contributions to behavior. We show that Dry Cell and Moist Cell responses to humidity involve different ionotropic receptor (IR) family sensory receptors, with dry air-activated Dry Cells reliant upon the IR Ir40a, and humid air-activated Moist Cells upon Ir68a. Both classes of hygrosensors innervate multiple antennal sensilla, including sensilla ampullacea near the antennal base as well as two classes of coeloconic sensilla near the tip. Dry Cells and Moist Cells each support behaviors linked to mosquito reproduction but contribute differently: Ir40a-dependent Dry Cells act in parallel with Ir68a-dependent Moist Cells to promote blood feeding, while oviposition site seeking is driven specifically by Ir68a-dependent Moist Cells. Together these findings reveal the importance of distinct hygrosensory pathways in blood feeding and oviposition site seeking and suggest Ir40a-dependent Dry Cells and Ir68a-dependent Moist Cells as potential targets for vector control strategies.

Thirst-driven hygrosensory suppression promotes water seeking in Drosophila.

Survival in animals relies on navigating environments aligned with physiological needs. In Drosophila melanogaster, antennal ionotropic receptors (IRs) sensing humidity changes govern hygrotaxis behavior. This study sheds light on the crucial role of IR8a neurons in the transition from high humidity avoidance to water-seeking behavior when the flies become thirsty. These neurons demonstrate a heightened calcium response toward high humidity stimuli in satiated flies and a reduced response in thirsty flies, modulated by fluctuating levels of the neuropeptide leucokinin, which monitors the internal water balance. Optogenetic activation of IR8a neurons in thirsty flies triggers an avoidance response similar to the moisture aversion in adequately hydrated flies. Furthermore, our study identifies IR40a neurons as associated with dry avoidance, while IR68a neurons are linked to moist attraction. The dynamic interplay among these neurons, each with opposing valences, establishes a preference for approximately 30% relative humidity in well-hydrated flies and facilitates water-seeking behavior in thirsty individuals. This research unveils the intricate interplay between sensory perception, neuronal plasticity, and internal states, providing valuable insights into the adaptive mechanisms governing hygrotaxis in Drosophila.

Low humidity enhances Zika virus infection and dissemination in Aedes aegypti mosquitoes.

As climate change alters Earth's biomes, it is expected the transmission dynamics of mosquito-borne viruses will change. While the effects of temperature changes on mosquito-virus interactions and the spread of the pathogens have been elucidated over the last decade, the impact of relative humidity changes is still relatively unknown. To overcome this knowledge gap, we exposed Aedes aegypti females to various humidity conditions. We measured different components of vectorial capacity such as survival, blood-feeding rates, and changes in infection and dissemination of Zika virus. Survival decreased as the humidity level decreased, while infection rates increased as the humidity level decreased. Alternatively, blood feeding rates and disseminated infection rates peaked at the intermediate 50% relative humidity treatment but were the same in the 30% and 80% relative humidity treatments. These results provide empirical evidence that Ae. aegypti exposure to low humidity can enhance Zika virus infection in the mosquito, which has important implications in predicting how climate change will impact mosquito-borne viruses.IMPORTANCEViruses transmitted by mosquitoes to humans are a major public health burden and are expected to increase under climate change. While we know that temperature is an important driver of variation in arbovirus replication in the mosquito, very little is known about how other relevant climate variables such as humidity will influence the interaction between mosquitoes and the viruses they transmit. Given the variability in humidity across environments, and the predicted changes in humidity under climate change, it is imperative that we also study the impact that it has on mosquito infection and transmission of arboviruses.

Laser Fabrication of Humidity Sensors on Ethanol-Soaked Polyimide for Fully Contactless Respiratory Monitoring.

Humidity-sensor-based fully contactless respiratory monitoring can eliminate the discomfort and infection risks associated with any wearable device. However, challenges in the facile fabrication of highly sensitive humidity sensors continue to hinder their widespread application for fully contactless respiratory monitoring. In this study, we introduce a simple method to fabricate highly sensitive humidity sensors. Our method employs laser-induced graphene (LIG) on an ethanol-soaked polyimide (PI) film as the electrode of the humidity sensor. The ethanol-soaked PI between adjacent LIG electrodes functions as the sensing material, enabling ion-conductive humidity sensing. Compared to the LIG humidity sensors fabricated on untreated PI films, LIG humidity sensors fabricated on ethanol-soaked PI films exhibit superior performance with higher linearity (R2 = 0.9936), reduced hysteresis (ΔH = 5.1% RH), and increased sensitivity (0.65%/RH). Notably, the LIG humidity sensor fabricated on the ethanol-soaked PI film can detect a person's breathing from a distance of 30 cm, a capability not achieved by sensors fabricated on untreated PI films. Moreover, incorporating these LIG humidity sensors into an array further enhances both the detection distance and the sensitivity for respiratory monitoring. Experimental results demonstrate that the LIG humidity sensor array can be employed for fully contactless on-bed respiration monitoring and for continuous, fully contactless monitoring of the respiratory rate during treadmill exercise. These results highlight the great potential of our LIG humidity sensors for various practical applications in medicine and sports.

Interfacial Polarization Strategy to Electroactive Poly(lactic acid) Nanofibers for Humidity-Resistant Respiratory Protection and Machine Learning-Assisted Monitoring.

The advancement of intelligent and biodegradable respiratory protection equipment is pivotal in the realm of human health engineering. Despite significant progress, achieving a balance between efficient filtration and intelligent monitoring remains a great challenge, especially under conditions of high relative humidity (RH) and high airflow rate (AR). Herein, we proposed an interfacial stereocomplexation (ISC) strategy to facilitate intensive interfacial polarization for poly(lactic acid) (PLA) nanofibrous membranes, which were customized for machine learning-assisted respiratory diagnosis. Theoretical principles underlying the facilitated formation of the electroactive phase and aligned PLA chains were quantitatively depicted in the ISC-PLA nanofibers, contributing to the increased dielectric constant and surface potential (as high as 2.2 and 5.1 kV, respectively). Benefiting from the respiration-driven triboelectric mechanisms, the ISC-PLA demonstrated a high PM0.3 filtration efficiency of over 99% with an ultralow pressure drop (75 Pa), even in challenging circumstances (95 ± 5% RH, AR of 85 L/min). Furthermore, we implemented the ISC-PLA with multifunction respiratory monitoring (response time of 0.56 s and recovery time of 0.25 s) and wireless transmission technology, yielding a high recognition rate of 83% for personal breath states. This innovation has practical implications for health management and theoretical advancements in respiratory protection equipment.

Adverse effects of meteorological factors and air pollutants on dry eye disease: a hospital-based retrospective cohort study.

Although previous studies have suggested that meteorological factors and air pollutants can cause dry eye disease (DED), few clinical cohort studies have determined the individual and combined effects of these factors on DED. We investigated the effects of meteorological factors (humidity and temperature) and air pollutants [particles with a diameter ≤ 2.5 µ m (PM2.5), ozone (O3), nitrogen dioxide (NO2), and carbon monoxide (CO)] on DED. A retrospective cohort study was conducted on 53 DED patients. DED was evaluated by Symptom Assessment in Dry Eye (SANDE), tear secretion, tear film break-up time (TBUT), ocular staining score (OSS), and tear osmolarity. To explore the individual, non-linear, and joint associations between meteorological factors, air pollutants, and DED parameters, we used generalized linear mixed model (GLMM) and Bayesian kernel machine regression (BKMR). After adjusting for all covariates, lower relative humidity or temperature was associated with a higher SANDE (p < 0.05). Higher PM2.5, O3, and NO2 levels were associated with higher SANDE and tear osmolarity (p < 0.05). Higher O3 levels were associated with lower tear secretion and TBUT, whereas higher NO2 levels were associated with higher OSS (p < 0.05). BKMR analyses indicated that a mixture of meteorological factors and air pollutants was significantly associated with increased SANDE, OSS, tear osmolarity, and decreased tear secretion.

Minimally invasive soft tissue repair using shrunken scaffolds.

The minimally invasive injection of tissue engineering scaffolds is of interest as it requires a smaller incision and quickens recovery. However, the engineering of scaffolds capable of injection remains a challenge. Here, we report on a shrunken scaffold inspired by the shrinking of puffed food in a humid environment. A scaffold is freeze-dried to remove water then placed in a humid atmosphere. The humidity causes the dry scaffold to shrink by up to 90%. In addition, the humidity treatment reduces the scaffolds modulus minimizing the foreign body response after implantation. The scaffolds can rapidly swell into their original size and shape after application. A tool for the delivery of the minimally invasive scaffolds is developed and we demonstrate the potential for minimally invasive delivery using this shrinking technique.

Relationship between metabolic indices and milk yield in Saanen goats exposed to heat stress in semi-tropical climates.

This study aimed to determine the effects of heat stress on 30 Saanen goats of different ages (young, middle-aged, and old). The average temperature and humidity values during the trial were 27.82 °C and 40.65%, respectively. Statistically significant differences in pulse rate (PR), respiratory rate (SS), and temperature humidity index (THI) were found between months (P < 0.05). Beta-hydroxybutyric acid (BHBA) values were found to be statistically significant in the young and middle-aged group (P < 0.05), with the highest in the middle-aged group obtained in June (0.65 mmol/L). Non-esterified fatty acids (NEFA) and urea (BUN) were significantly different (P < 0.05) in all age groups, whereas creatinine values showed no significant differences between groups. Significant positive relationships were found between body weight (BW) and body condition score (BCS), as well as pulse rate (PR) and daily average daily milk yield (DAMY) (P < 0.01). A positive correlation was also found between the respiratory rate (SS) and pulse rate (P < 0.01). As a result, although attempts have been made to prevent the decrease in productivity with applications for animals under heat stress, the optimal strategy may be to address the source of the problem. Issues that cause heat accumulation in the body should be identified and necessary arrangements should be made in the shelter to distribute heat to ensure that animals are less affected. Shaded areas should be provided in cases of stress caused by heat. An appropriate structural arrangement for temperature, humidification, and ventilation systems, as well as the provision of abundant fresh drinking water, would also be beneficial.

Sorption-based atmospheric water harvesting for continuous water production in the built environment: Assessment of water yield and quality.

Sorption-based atmospheric water harvesting (SAWH) is a promising solution for localized high-quality water production. Application of SAWH indoors offers dual benefits of on-site water generation and humidity control. This study evaluated the use of SAWH for water production in residential or office buildings, employing a portable zeolite-based SAWH device. Over the twelve-month testing period in the arid southwestern USA, the device achieved a median water yield of 3.6 L/day at a cost 30 % less than bottled water sold in the U.S. A mathematical model was developed for predicting water yield under different temperature and relative humidity (RH) conditions. Daily water yields were well fitted with the modified Langmuir model, with absolute humidity serving as the only prediction variable. Water extracted from a well-ventilated office building generally met the drinking water standards set by USEPA. However, elevated levels of dissolved organic carbon (DOC) were detected in the samples collected from the residential house (median = 32.6 mg/L), emphasizing the influence of human activities (e.g., cooking) on the emission of volatile and semi-volatile organic compounds in the air, which consequently reside in harvested water. Aldehydes and volatile fatty acids (formate, acetate) comprised roughly 50 % of the DOC found in the AWE water. A carbon fiber filter was not effective at removing these substances, highlighting the need for further research into effective treatment methods for DOC management before the safe use of AWE water. Overall, this study provides critical insights for the practical application of indoor SAWH as a decentralized source of high-quality water and emphasizes the need to identify and manage DOC for its safe use.

Effect of seven days heat stress on feed and water intake, milk characteristics, blood parameters, physiological indicators, and gene expression in Holstein dairy cows.

This study examined the effects of 7 days of heat stress on eight early lactating Holstein cows in climate-controlled chambers. The early lactating Holstein cows (42 ± 2 days in milk, 29.27 ± 0.38 kg/day milk yield, 1.21 ± 0.05 parity) were subjected to two 14-day periods, each consisting of 7 days of adaptation and 7 days of heat stress. Conditions were set to 22 °C and 50% humidity during adaptation, followed by heat stress periods with low-temperature, low-humidity (LTLH, 71 THI) and high-temperature, high-humidity (HTHH, 86 THI) treatments. Data from the last 7 days were analyzed using a mixed procedure in SAS. In the study, the HTHH group displayed marked physiological and biochemical changes on 14 days of heat stress exposure compared to the LTLH group. Firstly, the HTHH group's dry matter intake decreased by approximately 12% while their water intake increased by about 23%. Secondly, both milk yield and milk protein production in the HTHH group decreased by 10% and 20%, respectively. Thirdly, there was a reduction in white blood cells, hemoglobin, mean corpuscular hemoglobin, and platelets in the HTHH group, with concurrent increases in glucose, non-esterified fatty acids, and albumin concentrations. Additionally, the HTHH group exhibited elevated plasma concentrations of cortisol and haptoglobin. Moreover, the gene expression of heat shock protein 70 and heat shock protein 90 was significantly upregulated in the HTHH group's peripheral blood mononuclear cells. Lastly, key physiological indicators such as rectal temperature, heart rate, and skin temperature showed substantial elevations in the HTHH group. Considering the enormous negative effects observed in the analyzed blood metabolites, milk yield and compositions, and heat shock protein gene expression, early lactating Holstein cows were found to be more vulnerable to HTHH than LTLH over a 7 days exposure to heat stress.

Mechanism underlying the influence of humidity on thermal comfort and stress under mimicked working conditions.

Thermal comfort in an office impacts physical health, stress, and productivity. Humidity affects thermal comfort; however, the underlying mechanism remains unclear. This study assessed the influence of humidity on body temperature, thermal comfort, stress, and their relationship in working individuals. Thirteen participants performed three sets of 20-min calculation tasks followed by a 10-min rest in 26 °C or 33 °C with relative humidity (RH) of 30 % or 60 %. Core body temperature (Tcore), mean skin surface temperature (Tskin), and electrocardiogram were continuously recorded. Subjective thermal sensations and comfort were assessed with visual analog scales. Stress level was estimated based on α-amylase activity and immunoglobulin A level in saliva and heart rate variability. Mean Tskin and Tcore elevated at 33 °C with 60 % RH, where warm sensation and thermal discomfort also increased. Heart rate variability reflecting parasympathetic nerve activity decreased. There was a negative linear relationship between weighted body temperature and thermal comfort. However, thermal discomfort was augmented at a given weighted body temperature at 60 % RH. Thus, under indoor working conditions, high humidity may augment thermal discomfort and become a stress factor. Increases in Tskin and Tcore are involved in the mechanism, alongside other factors.