Epidermal secretion-purified biosensing patch with hydrogel sebum filtering membrane and unidirectional flow microfluidic channels.

The development of biosensing electronics for real-time sweat analysis has attracted increasing research interest due to their promising applications for non-invasive health monitoring. However, one of the critical challenges lies in the sebum interference that largely limits the sensing reliability in practical scenarios. Herein, we report a flexible epidermal secretion-purified biosensing patch with a hydrogel filtering membrane that can effectively eliminate the impact of sebum and sebum-soluble substances. The as-prepared sebum filtering membranes feature a dual-layer sebum-resistant structure based on the poly(hydroxyethyl methacrylate) hydrogel functionalized with nano-brush structured poly(sulfobetaine) to eliminate interferences and provide self-cleaning capability. Furthermore, the unidirectional flow microfluidic channels design based on the Tesla valve was incorporated into the biosensing patch to prevent external sebum contamination and allow effective sweat refreshing for reliable sensing. By seamlessly combining these components, the epidermal secretion-purified biosensing patch enables continuous monitoring of sweat uric acid, pH, and sodium ions with significantly improved accuracy of up to 12 %. The proposed strategy for enhanced sweat sensing reliability without sebum interference shows desirable compatibility for different types of biosensors and would inspire the advances of flexible and wearable devices for non-invasive healthcare.

Evaluation of the shear stability of aerobic granular sludge from a pilot-scale membrane bioreactor: Establishment of a quantitative method.

This work established a quantitative method to access the shear stability of aerobic granular sludge (AGS) and validated its feasibility by using the mature AGS from a pilot-scale (50 tons/day) membrane bioreactor (MBR) for treating real municipal wastewater. The results showed that the changing rate (ΔS) of the peak area (S) of granule size distribution (GSD) exhibited an exponential relationship (R2≥0.76) with the shear time (y=a-b·cx), which was a suitable indicative index to reflect the shear stability of different AGS samples. The limiting granule size (LGS) was defined and proposed to characterize the equilibrium size for AGS after being sheared for a period of time, whose value in terms of Dv50 showed high correlation (R2=0.92) with the parameter a. The free Ca2+ (28.44-34.21 mg/L) in the influent specifically interacted with polysaccharides (PS) in the granule's extracellular polymeric substance (EPS) as a nucleation site, thereby inducing the formation of Ca precipitation to enhance its Young's modulus, while Ca2+ primarily interacted with PS in soluble metabolic product (SMP) during the initial granulation process. Furthermore, the Young's modulus significantly affected the parameter a related to shear stability (R2=0.99). Since the parameter a was more closely related (R2=1.00) to ΔS than that of the parameter b or c, the excellent correlation (R2=0.99) between the parameter a and the wet density further verified the feasibility of this method.

Synergistic nanocoating with layer-by-layer functionalized PCL membranes enhanced by manuka honey and essential oils for advanced wound healing.

Chronic wounds represent a significant global health concern, statistically impacting 1-2% of the population in developed countries throughout their lifetimes. These wounds cause considerable discomfort for patients and necessitate substantial expenditures of time and resources for treatment. Among the emerging therapeutic approaches, medicated dressings incorporating bioactive molecules, including natural compounds, are particularly promising. Hence, the objective of this study was to develop novel antimicrobial dressings for wound treatment. Specifically, polycaprolactone membranes were manufactured using the electrospinning technique and subsequently coated with natural polyelectrolytes (chitosan as a polycation and a mixture of manuka honey with essential oils nanoemulsions as a polyanion) employing the Layer-by-Layer assembly technique. Physico-chemical and morphological characterization was conducted through QCM-D, FTIR-ATR, XPS, and SEM analyses. The results from SEM and QCM-D demonstrated successful layer deposition and coating formation. Furthermore, FTIR-ATR and XPS analyses distinguished among different coating compositions. The coated membranes were tested in the presence of fibroblast cells, demonstrating biocompatibility and expression of genes coding for VEGF, COL1, and TGF-ß1, which are associated with the healing process (assessed through RT-qPCR analysis). Finally, the membranes exhibited excellent antibacterial activity against both Staphylococcus aureus and Pseudomonas aeruginosa, with higher bacterial strain inhibition observed when cinnamon essential oil nanoemulsion was incorporated. Taken together, these results demonstrate the potential application of nanocoated membranes for biomedical applications, such as wound healing.

Modeling and validation of purification of pharmaceutical compounds via hybrid processing of vacuum membrane distillation.

This study provides an in-depth examination of forecasting the concentration of pharmaceutical compounds utilizing the input features (coordinates) r and z through a range of machine learning models. Purification of pharmaceuticals via vacuum membrane distillation process was carried out and the model was developed for prediction of separation efficiency based on hybrid approach. Dataset was collected from mass transfer analysis of process to obtain concentration distribution in the feed side of membrane distillation and used it for machine learning models. The dataset has undergone preprocessing, which includes outlier detection using the Isolation Forest algorithm. Three regression models were used including polynomial regression (PR), k-nearest neighbors (KNN), and Tweedie regression (TWR). These models were further enhanced using the Bagging ensemble technique to improve prediction accuracy and reduce variance. Hyper-parameter optimization was conducted using the Multi-Verse Optimizer algorithm, which draws inspiration from cosmological concepts. The Bagging-KNN model had the highest predictive accuracy (R2 = 0.99923) on the test set, indicating exceptional precision. The Bagging-PR model displayed satisfactory performance, with a slightly reduced level of accuracy. In contrast, the Bagging-TWR model showcased the least accuracy among the three models. This research illustrates the effectiveness of incorporating bagging and advanced optimization methods for precise and dependable predictive modeling in complex datasets.

[Mass transfer of bilirubin and bovine serum albumin in hollow fiber membrane module of artificial liver].

Understanding the mass transfer behaviors in hollow fiber membrane module of artificial liver is important for improving toxin removal efficiency. A three-dimensional numerical model was established to study the mass transfer of small molecule bilirubin and macromolecule bovine serum albumin (BSA) in the hollow fiber membrane module. Effects of tube-side flow rate, shell-side flow rate, and hollow fiber length on the mass transfer of bilirubin and BSA were discussed. The simulation results showed that the clearance of bilirubin was significantly affected by both convective and diffusive solute transport, while the clearance of macromolecule BSA was dominated by convective solute transport. The clearance rates of bilirubin and BSA increasd with the increase of tube-side flow rate and hollow fiber length. With the increase of shell-side flow rate, the clearance rate of bilirubin first rose rapidly, then slowly rose to an asymptotic value, while the clearance rate of BSA gradually decreased. The results can provide help for designing structures of hollow fiber membrane module and operation parameters of clinical treatment.

Bone augmentation using titanium mesh: A systematic review and meta-analysis.

PURPOSE: To review and compare the available literature on bone regeneration using titanium mesh and map the current evidence on bone gain outcomes and complications while comparing this scaffold with collagen membranes. MATERIALS AND METHODS: A comprehensive electronic and manual search was performed to identify randomised and non-randomised prospective controlled clinical trials that involved the use of titanium mesh in at least one arm, with outcomes including complications and vertical and/or horizontal bone gain. The focused questions were defined as follows: What are the outcomes of using titanium mesh in ridge augmentation compared to other types of barrier membrane, and what is the complication rate (membrane exposure and infection) when titanium mesh is used in these procedures? RESULTS: A total of 22 articles were included in the qualitative analysis. Overall, the studies that measured bone gain resulted in 3.36 mm vertical (196 subjects; 95% confidence interval 2.44 to 4.64 mm, range 1.4 to 5.7 mm) and 3.26 mm horizontal augmentation (81 subjects; 95% confidence interval 2.93 to 3.63 mm, range 2.6 to 3.7 mm), with variability among studies. The most commonly noted complication was mesh exposure, regardless of the type of mesh used, and the second most common was graft failure. The overall pooled complications rate reported in clinical trials was 10.8%. The meta-analysis comparing titanium mesh and collagen membranes, controlling for the type of bone regeneration (staged or simultaneous with implant placement), failed to show a significant difference in horizontal bone gain between the two techniques. CONCLUSIONS: Within the limitations of the present study and acknowledging the heterogeneity among the articles included, titanium mesh can serve as a feasible protective scaffold for bone regeneration with a relatively acceptable complication rate and in defects requiring around 4 mm 3D reconstruction. Data on patient-reported outcomes were scarce. CONFLICT-OF-INTEREST STATEMENT: None of the authors have any financial interests, either directly or indirectly, in the products or information mentioned in the present article.

A randomised controlled trial comparing the effectiveness of guided bone regeneration with polytetrafluoroethylene titanium-reinforced membranes, CAD/CAM semi-occlusive titanium meshes and CAD/CAM occlusive titanium foils in partially atrophic arches.

PURPOSE: To compare the clinical effectiveness of three different devices used in guided bone regeneration procedures for partially atrophic arches. MATERIALS AND METHODS: A randomised controlled trial with three parallel arms was conducted. The study evaluated titanium-reinforced polytetrafluoroethylene membrane (PTFE group), semi-occlusive CAD/CAM titanium mesh (mesh group) and occlusive CAD/CAM titanium foil (foil group) in terms of surgical outcomes and complications as well as surgical times and surgeon satisfaction in 27 guided bone regeneration procedures, presenting results from 1 year post-implant placement. RESULTS: Complications occurred in seven patients. No significant difference was found between the groups in terms of the occurrence of complications (P = 0.51), device exposure (P = 0.12) and implant failure (P = 0.650). Surgeon satisfaction varied significantly, with the PTFE group differing from the mesh (P = 0.003) and foil groups (P 0.001), but not between meshes and foils (P = 0.172). Surgical times also differed significantly, with longer times for PTFE membranes compared to meshes (P 0.001) and foils (P = 0.006), but with no difference between meshes and foils (P = 0.308). The mean reconstructed bone volume was 1269.55 ± 561.08 mm3, with no significant difference observed between the three groups (P = 0.815). There was also no significant difference for mean maximum height (6.72 mm, P = 0.867) and width (7.69 mm, P = 0.998). The mean marginal bone loss at 1 year after implant placement was 0.59 ± 0.27 mm. CONCLUSIONS: Although this study provides valuable insights into the potential benefits of using different types of CAD/CAM devices, further research with larger sample sizes and longer follow-up periods is warranted to validate these findings. CONFLICT-OF-INTEREST STATEMENT: The authors declare there are no conflicts of interest relating to this study.

High-Performance Nanofiltration Membrane with Dual Resistance to Gypsum Scaling and Biofouling for Enhanced Water Purification.

Nanofiltration (NF) technology is pivotal for ensuring a sustainable and reliable supply of clean water. To address the critical need for advanced thin-film composite (TFC) polyamide (PA) membranes with exceptional permselectivity and fouling resistance for emerging contaminant purification, we introduce a novel high-performance NF membrane. This membrane features a selective polypiperazine (PIP) layer functionalized with amino-containing quaternary ammonium compounds (QACs) through an in situ interfacial polycondensation reaction. Our investigation demonstrated that precise QAC functionalization enabled the construction of the selective PA layer with increased surface area, enhanced microporosity, stronger electronegativity, and reduced thickness compared to the control PIP membrane. As a result, the QAC NF membrane exhibited an approximately 51% increase in water permeance compared to the control PIP membrane, while achieving superior retention capabilities for divalent salts (>99%) and emerging organic contaminants (>90%). Furthermore, the incorporation of QACs into the PIP selective layer was proved to be effective in mitigating mineral scaling by allowing selective passage of scale-forming cations, while simultaneously exhibiting strong antimicrobial properties to combat biofouling. The in situ QAC incorporation strategy presented in this study provides valuable guidelines for the fit-for-purpose design of the selective PA layer, which is crucial for the development of high-performance NF membranes for efficient water purification.

A PLGA/Silk Fibroin Nanofibre Membrane Loaded with Natural Flavonoid Compounds Extracted from Green Cocoons for Wound Healing.

The use of biodegradable materials combined with natural metabolites in wound dressings has received much attention. Flavonoids (FLs) from green cocoons, as metabolites, have antibacterial, antioxidant, anti-inflammatory, and other pharmacological effects. In this study, composite membranes of FL-loaded polylactic glycolic acid (PLGA)/silk fibroin (SF) were prepared by an electrospinning method. The prepared membranes, including SF, exhibited a good slow-release effect and cytocompatibility. An in vitro evaluation of the FL-loaded PLGA/SF membranes demonstrated good antioxidant, antibacterial, and anti-inflammatory properties. Animal experiments showed that the wound healing rate of PLGA/SF-2.5FL membranes within 15 days was 97.3%, and that of the control group was 72.5%. The PLGA/SF-2.5FL membranes shortened the inflammatory period of a full-layer wound model and promoted skin regeneration and wound healing by downregulating expression of the pro-inflammatory cytokines IL-1ß and TNF-α and promoting expression of the growth factors VEGF, TGF-ß, and EGF. In summary, the PLGA/SF-2.5FL composite nanofibre membrane with anti-inflammatory properties is an ideal wound dressing to promote acute wound healing.

Facile Fabrication of Zeolitic Imidazolate Framework-8@Regenerated Cellulose Nanofibrous Membranes for Effective Adsorption of Tetracycline Hydrochloride.

The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g-1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.

In situ noninvasive monitoring of cell secretions based on MOFs/AAO hybrid membrane induced asymmetric ion transport.

Nanofluidic hybrid membranes display distinct ionic current rectification (ICR) properties and provide high surface area for immobilizing probes on the outer surface, exhibiting great potential in detection of biomolecules. Herein, we fabricated MOFs/AAO hybrid membrane with aptamers functionalized on the outer surface for in situ detection of living cells released secretions. TNF-α (a small molecular protein secreted by macrophages) was used as a model. After TNF-α was specifically captured by aptamers on the membrane surface, the asymmetry of surface charge on the hybrid membrane was amplified, the ICR was increased from 3.89 to 18.85. According to the ICR change, TNF-α was sensitively measured with a detection limit of ∼0.49 pM, which was significantly lower than other reported methods. When the hybrid membrane was clamped in the middle of self-made device, PET membrane incubated macrophages was rolled up and inserted into the chamber to mimic cellular microenvironment. Macrophages released TNF-α could be real time monitored with ionic current, macrophages and normal cells could be effectively distinguished according to the released TNF-α level. Thus, we proposed a nanofluidic platform for accurately measuring cell secretions in an engineered cellular microenvironment with a direct manner, without the need for labels or amplification steps.

Tough, Slippery, and Low-Permeability Multilayer Hydrogels Modified by Anisotropic Fiber Membrane for Soft Tissue Replacement.

Hydrogels with sustained lubrication, high load-bearing capacity, and wear resistance are essential for applications in soft tissue replacements and soft material devices. Traditional tough or lubricious hydrogels fail to balance the lubrication and load-bearing functions. Inspired by the gradient-ordered multilayer structures of natural tissues (such as cartilage and ligaments), a tough, smooth, low-permeability, and low-friction anisotropic layered electrospun fiber membrane-reinforced hydrogel was developed using electrospinning and annealing recrystallization. This hydrogel features a stratified porous network structure of varying sizes with tightly bonded interfaces, achieving an interfacial bonding toughness of 1.6 × 103 J/m2. The anisotropic fiber membranes, mimicking the orderly fiber structures within soft tissues, significantly enhance the mechanical properties of the hydrogel with a fracture strength of 20.95 MPa, a Young's modulus of 29.64 MPa, and a tear toughness of 37.94 kJ/m2 and reduce its permeability coefficient (6.1 × 10-17 m4 N-1 s-1). Meanwhile, the hydrogel demonstrates excellent solid-liquid phase load-bearing characteristics, which can markedly improve the tribological performance. Under a contact load of 4.1 MPa, the anisotropic fiber membrane-reinforced hydrogel achieves a friction coefficient of 0.036, a 219% reduction compared with pure hydrogels. Thus, the superior load-bearing and lubricating properties of this layered hydrogel underscore its potential applications in soft tissue replacements, medical implants, and other biomedical devices.

Barrier Membrane with Janus Function and Structure for Guided Bone Regeneration.

Guided bone regeneration (GBR) technology has been demonstrated to be an effective method for reconstructing bone defects. A membrane is used to cover the bone defect to stop soft tissue from growing into it. The biosurface design of the barrier membrane is key to the technology. In this work, an asymmetric functional gradient Janus membrane was designed to address the bidirectional environment of the bone and soft tissue during bone reconstruction. The Janus membrane was simply and efficiently prepared by the multilayer self-assembly technique, and it was divided into the polycaprolactone isolation layer (PCL layer, GBR-A) and the nanohydroxyapatite/polycaprolactone/polyethylene glycol osteogenic layer (HAn/PCL/PEG layer, GBR-B). The morphology, composition, roughness, hydrophilicity, biocompatibility, cell attachment, and osteogenic mineralization ability of the double surfaces of the Janus membrane were systematically evaluated. The GBR-A layer was smooth, dense, and hydrophobic, which could inhibit cell adhesion and resist soft tissue invasion. The GBR-B layer was rough, porous, hydrophilic, and bioactive, promoting cell adhesion, proliferation, matrix mineralization, and expression of alkaline phosphatase and RUNX2. In vitro and in vivo results showed that the membrane could bind tightly to bone, maintain long-term space stability, and significantly promote new bone formation. Moreover, the membrane could fix the bone filling material in the defect for a better healing effect. This work presents a straightforward and viable methodology for the fabrication of GBR membranes with Janus-based bioactive surfaces. This work may provide insights for the design of biomaterial surfaces and treatment of bone defects.

Feasibility of biomass-based flexible and transparent AuNPs-acetylcellulose membrane for multifarious surface-enhanced Raman spectroscopy detection.

BACKGROUND: Lignocellulosic biomass-based derivatives coupled with surface-enhanced Raman spectroscopy (SERS) technology have emerged as an appealing and indispensable tool in food safety and environmental monitoring for rapidly detecting trace contaminants like pesticide residues. The membrane material, serving as a substrate, ensures both sampling flexibility and test accuracy by directing the diffusion-adsorption process of the molecules. However, the existing membrane substrates, critical for the practical application of SERS, suffer from issues such as costly, intricate fabrication procedures, or restricted detection capabilities. RESULTS: Herein, we present a flexible, transparent, and biodegradable cellulose acetate membrane with gold nanoparticles (AuNPs) uniformly embedded, fabricated using a simple scraping method. This membrane achieved a limit of detection (LOD) of thiram pesticide in water at 10-8 g mL-1. The unique optical transparency of the substrates allowed for in-situ detection on surfaces, with an LOD of thiram reaching 30 ng cm-2. SIGNIFICANCE: Furthermore, SERS substrates made from corn stover-derived cellulose acetate enable the detection of various contaminants, highlighting their cost-effectiveness and eco-friendliness because of the abundance and low environmental impact of the raw materials.

A dual-recognition strategy based on pH-responsive molecularly imprinted membrane for highly selective capture of catecholamines: From construction to practical application.

BACKGROUND: Catecholamines (CAs) are involved in a wide range of physiological and pathological processes in the body and are progressively being used as important biomarkers for a variety of diseases. It is of great significance for accurate quantification of CAs to the diagnosis and treatment of diseases. However, the separation of CAs from complex biological matrices is still a great challenge due to the trace levels of CAs and the limited selectivity of existing pretreatment methods. RESULTS: In this work, a dual-recognition imprinted membrane (BA-MIM) was developed to utilize the synergistic action of pH-responsive boron affinity and molecular imprinted cavities for highly selective capture and release of CAs. The prepared BA-MIM possessed remarkable adsorption capacity (maximum capacity, 43.3 mg g-1), desirable surface hydrophilicity (46.2°), superior selectivity (IF = 6.2, α = 14.3), as well as favorable reusability (number of cycles, 6 times). On this basis, an integrated analytical method based on BA-MIM extraction combined with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was innovatively developed to highly selective separation, enrichment, and detection of CAs in rat brain tissue. Under the optimum conditions, a low quantitation limits (0.05-0.10 ng mL-1), wide linear range (10-1000 ng mL-1), good linearity (r2 > 0.99), and satisfactory recoveries (88.5%-98.5 %) were obtained for CAs. The proven method was further applied to kidney-yang-deficiency-syndrome (KYDS) group rat model, revealed the intrinsic connection between kidney disease and catecholamine metabolism. SIGNIFICANCE: This work provides an excellent reference paradigm for the effective construction of dual-recognition functional membrane material to the high-selective analysis of trace targets in complex matrices. Additionally, this integrated analytical strategy demonstrates its efficiency, sustainability, versatility, and convenience, showing remarkable prospect in a variety of applications for biological sample analysis.

Advances in Electrospun Nanofiber Membranes for Dermatological Applications: A Review.

In recent years, a wide variety of high-performance and versatile nanofiber membranes have been successfully created using different electrospinning methods. As vehicles for medication, they have been receiving more attention because of their exceptional antibacterial characteristics and ability to heal wounds, resulting in improved drug delivery and release. This quality makes them an appealing choice for treating various skin conditions like wounds, fungal infections, skin discoloration disorders, dermatitis, and skin cancer. This article offers comprehensive information on the electrospinning procedure, the categorization of nanofiber membranes, and their use in dermatology. Additionally, it delves into successful case studies, showcasing the utilization of nanofiber membranes in the field of skin diseases to promote their substantial advancement.

Facilitating inorganic arsenic speciation and quantification in waters: Polymer inclusion membrane preconcentration and X-ray fluorescence detection.

BACKGROUND: Arsenic, classified as a priority pollutant and human carcinogen by the IARC, is subject to stringent regulatory limits in food and water. Among various arsenic species found in water samples, arsenite (As(III)) is identified as the most toxic form. Given the limitations of conventional spectroscopic techniques in speciation analysis, there is a crucial need for innovative and sustainable methodologies that enable arsenic speciation. Simplifying these methodologies is essential for widespread applicability and effective environmental monitoring. RESULTS: This study proposes a simple and cost-effective analytical methodology for speciating inorganic arsenic in water samples. The method involves extracting As(III) into a polymer inclusion membrane (PIM) containing the extractant Cyanex 301 (bis(2,4,4-trimethylpentyl) dithiophosphinic acid), followed by analysis using energy dispersive X-ray fluorescence (EDXRF) spectrometry. The concentration of arsenate was measured after a reduction step using a thiosulfate/iodide mixture. This simple methodology allows a limit of quantification for trivalent arsenic (2 µg L-1), which is well below the World Health Organization's recommended maximum permissible level of As in drinking water (10 µg L-1). The method that is developed allows the determination of As at trace levels in waters with naturally occurring arsenic. SIGNIFICANCE AND NOVELTY: This study represents a significant advance in the field, providing a novel and efficient methodology for arsenic speciation analysis in water samples. By combining the advantages of polymer inclusion membrane (PIM) extraction with energy dispersive X-ray fluorescence (EDXRF) spectrometry, this study offers a cost-effective and environmentally friendly approach to address the critical issue of arsenic contamination in water sources, thereby contributing to enhanced environmental monitoring and public health protection.

Evaluation of pretreatment routes for seawater desalination by nanofiltration.

Nanofiltration (NF) has been used as the default sulfate removal process in platforms to treat seawater for water flooding. Seawater is generally pretreated by chlorination and cartridge filters to reduce fouling of the membranes; however, this pretreatment is insufficient to provide water quality high enough to maintain the productivity of the NF membranes. In this study, the performances of two different pretreatment routes were evaluated. Microfiltration (MF) was evaluated as a replacement for cartridge filters, and the advanced oxidation process UV/H2O2 was evaluated as an additional stage of pretreatment upstream of the cartridge filters. The permeability of the NF membranes after 12 h of seawater sulfate removal in a bench system was 4.4 L·h-1·m-2·bar-1 when the UV/H2O2 process was adopted as the pretreatment and 2.9 L·h-1·m-2·bar-1 when the MF process was adopted, compared to 1.6 L·h-1·m-2·bar-1 achieved for the pretreatment with the cartridge filter alone. These results indicate that NF membrane fouling was significantly higher when seawater was pretreated only by the cartridge filter in comparison to both proposed pretreatments. An economic analysis showed that both systems are economically viable and can potentially reduce the operational costs of the NF sulfate removal process on platforms.

Scalable Purification, Storage, and Release of Plant-Derived Nanovesicles for Local Therapy Using Nanostructured All-Cellulose Composite Membranes.

Plant-derived nanovesicles such as bilberries nanovesicles (BNVs) show immense promise as next-generation biotherapeutics and functional food ingredients; however, their isolation, purification, and storage on a large scale remain a challenge. In this study, biocompatible and nanostructured composite all-cellulose membranes are introduced as a scalable and straightforward approach to the isolation of BNV. The membranes consisting of a cellulose acetate matrix infused with anionic or cationic nanocelluloses promoted selective capture of BNVs through electrostatic and size-exclusion-mediated depth filtration. Furthermore, the surface of the composite membrane acted as a storage matrix for BNVs, ensuring their prolonged stability at 4 °C. The BNVs stored in the membrane could be promptly released through elution assisted by low-pressure vacuum filtration or diffusion in liquid media. The morphology, bioactivity, and stability of the extracted BNVs were preserved, and the release rate of BNVs in different cell cultures could be regulated, facilitating their use for local therapy. Consequently, this approach paves the way for the scalable production, purification, and storage of nanovesicles and advances their use in biotherapeutics and functional foods.

Enhanced Antifouling Capability of In Situ-Grown Hydrophilic-Hydrophobic Nanodomains on Membrane Surface in the Ultralow Pressurized Ultrafiltration Process.

Although hydrophilic modification of the membrane surface is widely adopted, polymeric membranes still suffer from irreversible fouling caused by hydrophilic components in surface water. Here, an ultrathin hydrogel layer (40 nm) with hydrophilic-hydrophobic textures was in situ grown onto the polysulfone ultrafiltration membrane surface using an organic-radical-initiated interfacial polymerization technique. The interfacial polymerization of hydrophilic and hydrophobic monomers ensured the molecular-scale distribution of hydrophilic and hydrophobic nanodomains on the membrane surface. These nanodomains, with their molecular lengths, facilitated dynamic repulsion interactions between the uniformly textured surface and foulant components with different degrees of hydrophilicity. Chemical force characterization confirmed that the adhesion force between the hydrophilic-hydrophobic textured membrane surface and foulants (dodecane, bovine serum albumin, and humic acid) was greatly reduced. Dynamic filtration experiments showed that a hydrophilic-hydrophobic textured membrane always possessed the largest water flux and the best antifouling performance. Furthermore, the foulant coverage ratio on the membrane surface was first evaluated by measuring changes in surface streaming potentials, which demonstrated a 69% reduction in the amount of foulant adhering to the hydrophilic-hydrophobic textured membrane surface. Therefore, the construction of hydrophilic-hydrophobic nanodomains on the membrane surface provides a promising strategy for alleviating membrane fouling caused by both hydrophobic and hydrophilic components during ultralow pressurized ultrafiltration processes.