Adjustment of storage capacity for non-structural carbohydrates in response to limited water availability in two temperate woody species.

Reserves of non-structural carbohydrates (NSC) stored in living cells are essential for drought tolerance of trees. However, little is known about the phenotypic plasticity of living storage compartments (SC) and their interactions with NSC reserves under changing water availability. Here, we examined adjustments of SC and NSC reserves in stems and roots of seedlings of two temperate tree species, Acer negundo L. and Betula pendula Roth., cultivated under different substrate water availability. We found that relative contents of soluble NSC, starch and total NSC increased with decreasing water availability in stems of both species, and similar tendencies were also observed in roots of A. negundo. In the roots of B. pendula, soluble NSC contents decreased along with the decreasing water availability, possibly due to phloem decoupling or NSC translocation to shoots. Despite the contrast in organ responses, NSC contents (namely starch) positively correlated with proportions of total organ SC. Individual types of SC showed markedly distinct plasticity upon decreasing water availability, suggesting that water availability changes the partitioning of organ storage capacity. We found an increasing contribution of parenchyma-rich bark to the total organ NSC storage capacity under decreasing water availability. However, xylem SC showed substantially greater plasticity than those in bark. Axial storage cells, namely living fibers in A. negundo, responded more sensitively to decreasing water availability than radial parenchyma. Our results demonstrate that drought-induced changes in carbon balance affect the organ storage capacity provided by living cells, whose proportions are sensitively coordinated along with changing NSC reserves.

Spencermartinsiella nicolii sp. nov., a potential opportunistic pathogenic yeast species isolated from rotting wood in Brazil.

Nineteen isolates representing a candidate for a novel yeast species belonging to the genus Spencermartinsiella were recovered from rotting wood samples collected at different sites in Atlantic Rainforest and Amazonian Forest ecosystems in Brazil. Similarity search of the nucleotide sequence of the intergenic spacer (ITS)-5.8S and large subunit D1/D2 regions of the ribosomal gene cluster showed that this novel yeast is closely related to Spencermartinsiella cellulosicola. The isolates differ by four nucleotide substitutions in the D1/D2 domain and six substitutions and 31 indels in the ITS region from the holotype of S. cellulosicola. Phylogenomic analysis based on 1474 single-copy orthologues for a set of Spencermartinsiella species whose whole genome sequences are available confirmed that the novel species is phylogenetically close to S. cellulosicola. The low average nucleotide identity value of 83% observed between S. cellulosicola and the candidate species confirms that they are distinct. The novel species produced asci with hemispherical ascospores. The name Spencermartinsiella nicolii sp. nov. is proposed. The holotype is CBS 14238T. The MycoBank number is MB855027. Interestingly, the D1/D2 sequence of the S. nicolii was identical to that of an uncultured strain of Spencermartinsiella causing systemic infection in a male adult crocodile (Crocodylus niloticus). The characterization of some virulence factors and antifungal susceptibility of S. nicolii isolates suggest that this yeast may be an opportunistic pathogen for animals, including humans; the isolates grow at 37 °C.

Marine debris induced by the Great East Japan Earthquake and Tsunami: A multi-sensor remote sensing assessment.

Using satellite remote sensing, we show the distribution, dominant type, and amounts of marine debris off the northeast coast of Japan after the Great East Japan Earthquake on 11 March 2011 and subsequent tsunami. Extensive marine debris was found on March 12, with the maximal amount found on March 13. The debris was found to be mainly wood (possibly lumber wood), with an estimated 1.5 million metric tons in an elongated water area of 6800 km2 (18 km E-W and 380 km N-S) near parallel to the coast between 36.75°N and 40.25°N. The amount decreased rapidly with time, with scattered debris patches captured in high-resolution satellite images up to April 6. These results provide new insights on the initial distribution of the Japanese Tsunami Marine Debris, which may be used to help find bottom deposition of debris and help refine numerical models to predict the debris trajectory and fate. SYNOPSIS: Marine debris induced by the 2011 Great East Japan Earthquake and Tsunami is found to be mainly composed of wood and possibly lumber wood from constructions, with maximum amount on 13 March 2011 distributed within a narrow band of ∼18 km near parallel to the northeast coast of Japan between 36.75°N and 40.25°N.

Analysis of the Mechanism of Wood Vinegar and Butyrolactone Promoting Rapeseed Growth and Improving Low-Temperature Stress Resistance Based on Transcriptome and Metabolomics.

Rapeseed is an important oil crop in the world. Wood vinegar could increase the yield and abiotic resistance of rapeseed. However, little is known about the underlying mechanisms of wood vinegar or its valid chemical components on rapeseed. In the present study, wood vinegar and butyrolactone (γ-Butyrolactone, one of the main components of wood vinegar) were applied to rapeseed at the seedling stage, and the molecular mechanisms of wood vinegar that affect rapeseed were studied by combining transcriptome and metabolomic analyses. The results show that applying wood vinegar and butyrolactone increases the biomass of rapeseed by increasing the leaf area and the number of pods per plant, and enhances the tolerance of rapeseed under low temperature by reducing membrane lipid oxidation and improving the content of chlorophyll, proline, soluble sugar, and antioxidant enzymes. Compared to the control, 681 and 700 differentially expressed genes were in the transcriptional group treated with wood vinegar and butyrolactone, respectively, and 76 and 90 differentially expressed metabolites were in the metabolic group. The combination of transcriptome and metabolomic analyses revealed the key gene-metabolic networks related to various pathways. Our research shows that after wood vinegar and butyrolactone treatment, the amino acid biosynthesis pathway of rapeseed may be involved in mediating the increase in rapeseed biomass, the proline metabolism pathway of wood vinegar treatment may be involved in mediating rapeseed's resistance to low-temperature stress, and the sphingolipid metabolism pathway of butyrolactone treatment may be involved in mediating rapeseed's resistance to low-temperature stress. It is suggested that the use of wood vinegar or butyrolactone are new approaches to increasing rapeseed yield and low-temperature resistance.

Ellagitannin Content in Extracts of the Chestnut Wood Aesculus.

The chestnut tree (Castanea sativa Mill.) is a widespread plant in Europe, rich in high-value compounds, which can be divided mainly into monomeric polyphenols and tannins. These compounds exhibit various biological activities, such as antioxidant, as well as anticarcinogenic and antimicrobial properties. Chestnut wood (CW) extracts were prepared using different extraction techniques, process conditions, solvents, and their mixtures. This work aimed to test various extraction techniques and determine the optimal solvent for isolating enriched fractions of vescalagin, castalagin, vescalin, and castalin from CW residues. Supercritical CO2 extraction with a more polar cosolvent was applied at different pressures, which influenced solvent density. According to the results, the proportions of the components strongly depended on the solvent system used for the extraction. In addition, HPLC-DAD was used for semiqualitative purposes to detect vescalagin, castalagin, vescalin, and castalin. The developed valorization protocol allows efficient fractionation and recovery of the polyphenolic components of CW through a sustainable approach that also evaluates pre-industrial scaling-up.

Engineering Rhodosporidium toruloides for sustainable production of value-added punicic acid from glucose and wood residues.

Rhodosporidium toruloides has emerged as a prominent candidate for producing single-cell oil from cost-effective feedstocks. In this study, the capability of R. toruloides to produce punicic acid (PuA), a representative plant unusual fatty acid, was investigated. The introduction of acyl lipid desaturase and conjugase (PgFADX) allowed R. toruloides to accumulate 3.7 % of total fatty acids as PuA. Delta-12 acyl lipid desaturase (PgFAD2) and diacylglycerol acyltransferase 2 were shown to benefit PuA production. The strain with PgFADX and PgFAD2 coexpression accumulated 12 % of its lipids as PuA from glucose, which translated into a PuA titer of 451.6 mg/L in shake flask condition. Utilizing wood hydrolysate as the feedstock, this strain produced 6.4 % PuA with a titer of 310 mg/L. Taken together, the results demonstrated that R. toruloides could serve as an ideal platform for the production of plant-derived high-value conjugated fatty acid using agricultural and forestry waste as feedstock.

Microbial dynamics, chemical profile, and bioactive potential of diverse Egyptian marine environments from archaeological wood to soda lake.

Halophilic archaea are a unique group of microorganisms that thrive in high-salt environments, exhibiting remarkable adaptations to survive extreme conditions. Archaeological wood and El-Hamra Lake serve as a substrate for a diverse range of microorganisms, including archaea, although the exact role of archaea in archaeological wood biodeterioration remains unclear. The morphological and chemical characterizations of archaeological wood were evaluated using FTIR, SEM, and EDX. The degradation of polysaccharides was identified in Fourier transform infrared analysis (FTIR). The degradation of wood was observed through scanning electron microscopy (SEM). The energy dispersive X-ray spectroscopy (EDX) revealed the inclusion of minerals, such as calcium, silicon, iron, and sulfur, into archaeological wood structure during burial and subsequent interaction with the surrounding environment. Archaea may also be associated with detected silica in archaeological wood since several organosilicon compounds have been found in the crude extracts of archaeal cells. Archaeal species were isolated from water and sediment samples from various sites in El-Hamra Lake and identified as Natronococcus sp. strain WNHS2, Natrialba hulunbeirensisstrain WNHS14, Natrialba chahannaoensis strain WNHS9, and Natronococcus occultus strain WNHS5. Additionally, three archaeal isolates were obtained from archaeological wood samples and identified as Natrialba chahannaoensisstrain W15, Natrialba chahannaoensisstrain W22, and Natrialba chahannaoensisstrain W24. These archaeal isolates exhibited haloalkaliphilic characteristics since they could thrive in environments with high salinity and alkalinity. Crude extracts of archaeal cells were analyzed for the organic compounds using gas chromatography-mass spectrometry (GC-MS). A total of 59 compounds were identified, including free saturated and unsaturated fatty acids, saturated fatty acid esters, ethyl and methyl esters of unsaturated fatty acids, glycerides, phthalic acid esters, organosiloxane, terpene, alkane, alcohol, ketone, aldehyde, ester, ether, and aromatic compounds. Several organic compounds exhibited promising biological activities. FTIR spectroscopy revealed the presence of various functional groups, such as hydroxyl, carboxylate, siloxane, trimethylsilyl, and long acyl chains in the archaeal extracts. Furthermore, the archaeal extracts exhibited antioxidant effects. This study demonstrates the potential of archaeal extracts as a valuable source of bioactive compounds with pharmaceutical and biomedical applications.

Interlaboratory and cross-platform accessibility of time-of-flight wood identification database.

The mass spectral database of tree species built by US Fish and Wildlife Service has thousands of entries and has been a valuable resource to combat illegal logging and international trade. The database was and continues to be constructed using a particular ambient ionization time-of-flight mass spectrometry (TOF-MS) platform in the agency branch in Ashland, OR, with which queries of unknown wood samples are investigated exclusively. Laboratories that operate different MS instruments also have an interest in using the database if they can produce valid matches to known samples compatible with the database. Four species were selected for inter-laboratory comparison using Orbitrap MS instruments and the equivalent TOF-MS platform with direct analysis in real time ionization of institution-sourced wood samples. Identities of the known samples were confirmed by examination of their microscopic wood anatomy. Orbitrap analysis was able to identify each species as confidently as the TOF instruments, often with less variation in spectra but not necessarily greater mass accuracy or better-matched signal abundance to the control database. The Orbitrap program also had to be doubled to two scanned mass ranges appended for greater peak intensity, before spectra could be correctly matched to the database, but the program was successful.

Efficient fabrication of cellulose polymer networks via alkaline swelling strategy for wood bonding.

Existing issues with bio-based adhesives, such as complex preparation processes, high energy consumption, and production costs, still need to be addressed. In our study, APTES was grafted onto microcrystalline cellulose (MCC) to generate active aminated cellulose, and then reacted with the epoxide group in glycerol triglycidyl ether (GTE) through a swelling strategy under alkaline solvent, forming a network structure via covalent cross-linking. The adhesive exhibits superior bonding performance and water-resistant property in the bonding strength test of poplar plywood, with a dry shear strength of 2.40 MPa, a wet shear strength of 2.16 MPa after soaking in 63 °C hot water, and a wet shear strength of 1.79 MPa after soaking in boiling water. In terms of cost calculation, the theoretical production cost of AC-GTE adhesive is calculated to be 5303.7 RMB per ton, which is comparable to that of phenol-formaldehyde (PF) resin and other petrochemical-based adhesives, and significantly lower than that of isocyanate-based adhesives. These research results can provide a practical example for producing high-efficiency, aldehyde-free, and low-cost bio-based adhesives.

Conservation of wild food plants from wood uses: evidence supporting the protection hypothesis in Northeastern Brazil.

BACKGROUND: The interplay between different uses of woody plants remains underexplored, obscuring our understanding of how a plant's value for one purpose might shield it from other, more harmful uses. This study examines the protection hypothesis by determining if food uses can protect woody plants (trees and shrubs) from wood uses. We approached the hypothesis from two distinct possibilities: (1) the protective effect is proportional to the intensity of a species' use for food purposes, and (2) the protective effect only targets key species for food purposes. METHODS: The research was conducted in a rural community within "Restinga" vegetation in Northeast Brazil. To identify important food species for both consumption and income (key species) and the collection areas where they naturally occur, we conducted participatory workshops. We then carried out a floristic survey in these areas to identify woody species that coexist with the key species. Voucher specimens were used to create a field herbarium, which, along with photographs served as visual stimuli during the checklist interviews. The interviewees used a five-point Likert scale to evaluate the species in terms of perceived wood quality, perceived availability, and use for food and wood purposes. To test our hypothesis, we used Cumulative Link Mixed Models (CLMMs), with the wood use as the response variable, food use, perceived availability and perceived quality as the explanatory variables and the interviewee as a random effect. We performed the same model replacing food use for key species food use (a binary variable that had value 1 when the information concerned a key species with actual food use, and value 0 when the information did not concern a key species or concerned a key species that was not used for food purposes). RESULTS: Consistent with our hypothesis, we identified a protective effect of food use on wood use. However, this effect is not directly proportional to the species' food use, but is confined to plants with considerable domestic food importance. Perceived availability and quality emerged as notable predictors for wood uses. CONCLUSION: We advocate for biocultural conservation strategies that enhance the food value of plants for their safeguarding, coupled with measures for non-edible woody species under higher use-pressure.

Multi-scale design of MWCNT/glass fiber/balsa wood composite multilayer stealth structure with wide broadband absorption and excellent mechanical properties.

In unmanned aircraft applications, electromagnetic wave (EMW) absorbers suffer from defects in narrow absorption bands and poor mechanical properties. To solve the problems, a lightweight multilayer stealth structure with wide broadband absorption performance and excellent mechanical properties was designed and prepared by adjusting microscopically the number of multi-walled carbon nanotubes (MWCNT) and modulating macroscopically the thickness-matching relationship of the structure to promote the absorption of EMW synergistically. Under the MWCNT of 30 wt% and the depletion layer with the thickness of 0.2 mm, the effective absorption bandwidth (EAB) covers the entire Ku-band while maintaining a minimum reflection loss (RL) of -15 dB. Besides, the radar cross-sectional area attenuation is as high as 23.1 dBm2, as well as the mechanical properties of the radar absorbing structures (RAS) were improved significantly due to the reducing structural density from balsa wood and the enhancement effect of glass fiber mats (GFM). The study constructed balsa-based RAS with excellent EMW absorbing and mechanical properties from both micro-nano scale and macro-structure, providing a research route for designing high-performance and lightweight stealth structures.

In situ self-assembly of pulp microfibers and nanofibers into a transparent, high-performance and degradable film.

Despite the significant properties of fossil plastics, the current unsustainable methods employed in production, usage and disposal present a grave threat to both energy and environment. The development of degradable biomass materials as substitutes for fossil plastics can effectively address the energy-environment paradox at the source. Here, we prepared novel micro-nano multiscale composite films through assembling and crosslinking nanocellulose with coniferous wood pulp microfibers. The composite film combines the advantages of microfibers and nanocellulose, achieving a maximum transmittance of 91 %, foldability, excellent mechanical properties (tensile strength: 51.3 MPa, elongation at break: 4 %, young's modulus: 3.4 GPa), high thermal stability and complete degradation within 40 days. The composite film exhibits mechanochemical self-healing and retains properties even after fracture. Such exceptional performance fully meets the requirements for substituting petroleum plastics. By incorporating CaAlSiN3:Eu2+ into the composite film, it enables dual emission of red and blue light, thereby being able to promote plant growth and presenting potential as a novel sustainable alternative for agricultural films. By assembling microfiber and nanocellulose, such novel strategy is presented for the fabrication of high-quality biomass materials, thereby offering a promising avenue towards environment-friendly resource-sustainable new materials.

Partial asynchrony of coniferous forest carbon sources and sinks at the intra-annual time scale.

As major terrestrial carbon sinks, forests play an important role in mitigating climate change. The relationship between the seasonal uptake of carbon and its allocation to woody biomass remains poorly understood, leaving a significant gap in our capacity to predict carbon sequestration by forests. Here, we compare the intra-annual dynamics of carbon fluxes and wood formation across the Northern hemisphere, from carbon assimilation and the formation of non-structural carbon compounds to their incorporation in woody tissues. We show temporally coupled seasonal peaks of carbon assimilation (GPP) and wood cell differentiation, while the two processes are substantially decoupled during off-peak periods. Peaks of cambial activity occur substantially earlier compared to GPP, suggesting the buffer role of non-structural carbohydrates between the processes of carbon assimilation and allocation to wood. Our findings suggest that high-resolution seasonal data of ecosystem carbon fluxes, wood formation and the associated physiological processes may reduce uncertainties in carbon source-sink relationships at different spatial scales, from stand to ecosystem levels.

Acoustic performance analysis of wooden structure building wall by integrating BIM technology and impedance tube method.

With the increasing demand for building acoustic performance, accurately evaluating the acoustic performance of building walls has become an important research topic. However, existing research has mostly focused on general building materials such as concrete, iron and steel, and glass. For wooden structure wall, due to the sound absorption performance of the materials themselves and the complexity of structural design, the analysis of their acoustic performance is still relatively weak. Moreover, there is a lack of quantitative description of their spectral characteristics and acoustic impedance. To analyze the acoustic performance of wooden structure building walls, Building Information Model (BIM) and impedance tube method were integrated to construct a building wall performance testing system with BIM technology. The impedance tube method was applied and testing functions for sound absorption and insulation performance were designed. The outcomes indicated that in the error test, the error range between the experimental group and the control group was [0.01, 0.18], indicating a high reliability of the experimental results. In the calculation of sound insulation of different specimens at different sound frequencies, when the frequency was 1600Hz, the sound insulation of the control group and experimental group was 65.30dB and 70.14dB, proving the effectiveness of the design method. The above results demonstrate the practicality of integrating BIM technology and impedance tube method in the acoustic performance analysis of wooden structure building walls. This study provides strong technical support for reducing the indoor environment of wooden buildings and improving the comfort of people's living environment.

Winter indoor air quality in traditional Mongolian yurts, in a Ger district of Ulaanbaatar.

In Ulaanbaatar roughly 60 % of the population live in traditional Mongolian yurts in the so-called Ger districts of the city. Winter indoor air quality is a serious concern in these districts as about 98 % of households consume solid fossil fuel (mainly coal). In our study, indoor air quality was assessed based on PAHs analysis and ecotoxicity testing of 24-hour samples collected in 4 yurts. Three of the selected yurts were equipped with conventional while the fourth one with improved stoves. Analysis of PAHs profiles showed the prevalence of higher molecular weight PAHs in all yurts. Concentrations of the 5-ring benzo(b)fluoranthene and 6-ring benzo(g.h.i)perylene were extremely high in one yurt using conventional stove, 8430 µg g-1 and 6320 µg g-1, respectively. Ecotoxicity of the samples was assessed using the kinetic version of the Vibrio fischeri bioluminescence inhibition bioassay. In concordance with PAHs concentrations, ecotoxicity was also the highest in that yurt.

Microanalytical approaches on the silicification process of wood fossil from Jasinga, West Java, Indonesia.

Worldwide, silicified woods are found in many geological formations. Significantly, the organic materials of wood are no longer dominant; almost all wood fossils have been mineralized into inorganic silica materials. These unique geological processes must be understood to develop better understanding on organic material fossilization, particularly in the micron scale. Therefore, our aim was to characterize the composition of silicified wood using comprehensive microanalysis. The methods utilized were XRF, ICP-MS, XRD, FTIR, and FE-EPMA. Specimens are from Jasinga, West Java, Indonesia. The results showed that wood silicification was controlled by the infiltration of silica from the host rock into the spaces of the wood structure. In Jasinga, they are controlled by Pliocene tuffaceous sedimentary rocks. The ratio of silica phases revealed a trend in the degree of silicification. Besides silica, the distribution of trace elements also demonstrates the geochemical interaction between the wood fossil and host rock. Wood fossils are affected by the gradual replacement of organic carbon-based materials with silica through silicification. Silica enrichment occurs in the internal of wood, facilitates permineralization and recrystallization. Silica replaces organic material and preserves the wood structures. The microanalytical approach provides comprehensive perspectives on wood petrification, leads to better insights for paleontological studies.

Preparation and application of wood-supported piezocatalyst with high efficiency and stability via partial hydrolysis of wood cellulose and hemicellulose with Lewis acid.

The conveniently recoverable piezocatalyst with self-floating and stable performance has drawn wide attention. Herein, MoS2 was anchored on 1-cm-square eucalyptus wood blocks via a facile hydrothermal/solvothermal process to fabricate two floating piezocatalysts, i.e., MoS2/unpretreated wood (MUW) and MoS2/pretreated wood (MPW). FeCl3 solution was used as a Lewis acid to pretreat the wood through partial hydrolyzing cellulose and hemicellulose for an purpose to creat rich micropores for MoS2 loading in the wood and to form MoFe heterojunction. The piezocatalytic properties and performance of the prepared wood were systematically studied. The scanning electron microscopy confirms MoS2 was anchored on wood surface. The macroscopic photos show that MoS2 penetrated through the MPW interior whereas it was only loaded on the wood surface layer. The X-ray photoelectron spectroscopy reveals the shift of Mo 3d and S 2p, verifying the heterojunction formation of MPW. The Fourier transform infrared spectra prove the partial hydrolysis of wood matrix. In comparison to MUW, MPW had excellent piezocatalytic property, wide pH adaptability, convenient recyclability and high stability. Sildenafil and Cr6+ ions could be completely removed in 20 and 15 min, respectively, by MPW. Contrastly, the removal efficiency of sildenafil and Cr6+ by MUW was 78.6 % and 68.3 % in 20 and 15 min, respectively. After five cycles of use, the removal ratio of sildenafil was 62.4 % by MUW and 90.5 % by MPW in 20 min. The mineralization efficiency of sildenafil reached 99.2 % in 30 min by MPW, and various types of N/S-containing intermediates were effectively degraded. The electron spin resonance characterization and active species scavenging experiments displayed that e- and •O2- were major active species responsible for Cr6+ piezoreduction by MUW and MPW, while •O2- and •OH were the dominant species accounting for sildenafil degradation by MUW and MPW, respectively. And •OH was not generated in the MUW piezocatalysis process. MPW had higher piezoelectric current and lower resistance at the electron transfer interface than MUW. Conclusively, this study paves a new pathway for preparing new floating piezocatalysts with easy recyclability and high stability from biomass for wastewater treatment.

Coordination-driven in-situ controlled synthesis of cellulose-based fluorescent composite with tunable color for decoration, anti-counterfeiting, and accurate color recognition.

Fluorescent composites have widespread applications in many aspects. Wood-derived cellulose is a renewable, easily processed and biodegradable, and cellulose-based fluorescent composites are highly favored for in different fields. However, the existing cellulose-based fluorescent composites still have many urgent problems to be solved, such as unstable luminescence properties and easy shedding of luminescent substances, and the development of their practical applications is still a formidable challenge. Herein, a green and mild strategy for the in-situ controllable synthesis of cellulose-based fluorescent composites membrane (CFM) was developed. Firstly, delignified wood (DW) was modified with citric acid, and then lanthanide ions were introduced on modified DW through coordinated covalent bonds. Additionally, the luminescence mechanism of CFM is proposed. CFMs show adjustable color for decorative and light conversion and can be accurately identified for data protection, which increases the high value-added of cellulose-based composites. The stable luminescent properties were maintained after sonication for 30 min or solvent immersion for three months. Therefore, this work presents a new approach for the synthesis of CFM, which provides an environment-friendly strategy for manufacturing cellulose-based fluorescent materials, which is significant for the subsequent development of environment-friendly composites for anti-counterfeiting and decorative applications.

Orthophosphate uptake onto woodchips in denitrifying bioreactors is enhanced by anoxic-(anaerobic-)oxic cycling.

Woodchips are widely used as a low-cost and renewable organic carbon source for denitrifying biofilms in passive nutrient removal systems. One limitation of wood-based biofiltration systems is their relatively poor removal of phosphorus (P) from subsurface drainage and stormwaters, necessitating the use of additional filter media when co-treatment of nitrogen (N) and P is required. Here, we show that anoxic-oxic cycling of woodchip media, which enhances nitrate (NO3-) removal by increasing the mobilization of organic carbon from wood, also improves orthophosphate (Pi) uptake onto woodchips. Orthophosphate removal rates in flow-through woodchip columns ranged from 0 to 34.9 µg PO43- L-1 h-1 under continuously-saturated (anoxic) conditions, and increased to 17.5 to 71.9 µg PO43- L-1 h-1 in columns undergoing drying-rewetting (oxic-anoxic) cycles. The highest Pi removal efficiencies were observed in the first 20 h after reactors were re-flooded, and were concurrent with maxima in polyphosphate kinase (ppk) gene expression by the polyphosphate accumulating organisms (PAOs) Accumulibacter spp. and Pseudomonas spp. Batch experiments confirmed that anoxic-anaerobic-oxic pre-incubation conditions led to orthophosphate uptake onto woodchips as high as 74.9 ± 0.8 mg PO43-/kg woodchip, and batch tests with autoclaved woodchips demonstrated that Pi uptake was due to biological processes and not adsorption. NO3- removal in batch tests was also greatest under oxic incubation conditions, attributed to greater carbon availability in hypoxic to anoxic zones in woodchip biofilms. While further research is needed to elucidate the mechanisms controlling enhanced Pi uptake by woodchip biofilms under anoxic-(anaerobic-)oxic cycling, these results suggest a role for enhanced Pi uptake by PAOs in a nature-based system for treatment of nonpoint source nutrients.