Insights into Factors Affecting Ethylene-Vinyl Acetate Copolymer Crystallinity in Islatravir Implant.

Islatravir, a highly potent nucleoside reverse transcriptase translocation inhibitor (NRTTI) for the treatment of HIV, has great potential to be formulated as ethylene-vinyl acetate (EVA) copolymer-based implants via hot melt extrusion. The crystallinity of EVA determines its physical and rheological properties and may impact the drug-eluting implant performance. Herein, we describe the systematic analysis of factors affecting the EVA crystallinity in islatravir implants. Differential scanning calorimetry (DSC) on EVA and solid-state NMR revealed drug loading promoted EVA crystallization, whereas BaSO4 loading had negligible impact on EVA crystallinity. The sterilization through γ-irradiation appeared to significantly impact the EVA crystallinity and surface characteristics of the implants. Furthermore, DSC analysis of thin implant slices prepared with an ultramicrotome indicated that the surface layer of the implant was more crystalline than the core. These findings provide critical insights into factors affecting the crystallinity, mechanical properties, and physicochemical properties of the EVA polymer matrix of extruded islatravir implants.

Porous poly(bismaleimide-co-divinylbenzene) microspheres as dispersive solid-phase extraction adsorbent coupled to high-performance liquid chromatography for the determination of triazine herbicide residues in vegetable samples.

In this work, monodisperse and nano-porous poly(bismaleimide-co-divinylbenzene) microspheres with large specific surface area (427.6 m2 /g) and rich pore structure were prepared by one-pot self-stable precipitation polymerization of 2,2'-bis[4-(4-maleimidophenoxy) phenyl] propane and divinylbenzene. The prepared poly(bismaleimide-co-divinylbenzene) microspheres were employed as dispersive solid-phase extraction (DSPE) adsorbent for the extraction of triazine herbicides. Under optimized conditions, good linearities were obtained between the peak area and the concentration of triazine herbicides in the range of 1-400 µg/L (R2 ≥ 0.9987) with the limits of detection of 0.12-0.31 µg/L. Triazine herbicides were detected using the described approach in vegetable samples (i.e., cucumber, tomato, and maize) with recoveries of 93.6%-117.3% and relative standard deviations of 0.4%-3.5%. In addition, the recoveries of triazine herbicides remained above 80.7% after being used for nine DSPE cycles, showing excellent reusability of poly(bismaleimide-co-divinylbenzene) microspheres. The adsorption of poly(bismaleimide-co-divinylbenzene) microspheres toward triazine herbicides was a monolayer and chemical adsorption. The adsorption mechanism between triazine herbicides and adsorbents might be a combination of hydrogen bonding, electrostatic interaction, and π-π conjugation. The results confirmed the potential use of the poly(bismaleimide-co-divinylbenzene) microspheres-based DSPE coupled to the high-performance liquid chromatography method for the detection of triazine herbicide residues in vegetable samples.

Development and characterization of 3D printed ethylene vinyl acetate (EVA) as drug delivery device for the treatment of overactive bladder.

The overactive bladder is a condition characterized by a sudden urge to urinate, even with small volumes of urine present in the bladder. The current treatments available for this pathology consist on conservative approaches and the continuous administration of drugs, which when made by conventional methods has limitations related to the first pass metabolism, bioavailability, severe side effects, and low patient adherence to treatments, ultimately leading to low effectiveness. Within this context, the present work proposes the design, manufacture, and characterization of an intravesical implant for the treatment of overactive bladder pathology, using EVA copolymer as a matrix and oxybutynin as a drug. The fabrication of devices through two manufacturing techniques (extrusion and additive manufacturing by fused filament fabrication, FFF) and the evaluation of the implants through characterization tests was proposed. The usability and functionality were evaluated through simulated insertion of the device/prototype in a bladder model through catheter insertion tests. The safety and effectiveness of the devices was investigated from mechanical testing as well as drug release assays. Drug release assays presented a burst release in the first 24 h, followed by a release of 1.8 and 2.8 mg/d, totalizing 32 d. Mechanical tests demonstrated an increase in the stiffness of the specimens due to the addition of the drug, showing a change in maximum stress and strain at break. The released dose was higher than that usually presented when considering the oral administration route, showing the optimization of the development of this implant has the potential to improve the quality of life of patients with overactive bladder.

Inhibitory effects and mechanisms of phenolic compounds in rapeseed oil on advanced glycation end product formation in chemical and cellular models in vitro.

Sinapic acid (SA), canolol (CAO) and canolol dimer (CAO dimer) are the main phenolic compounds in rapeseed oil. However, their possible efficacy against glycation remains unclear. This study aims to explore the impacts of these substances on the formation of advanced glycation end products (AGEs) based on chemical and cellular models in vitro. Based on fluorescence spectroscopy results, three chemical models of BSA-fructose, BSA-methylglyoxal (MGO), and arginine (Arg)-MGO showed that SA/CAO/CAO dimer could effectively reduce AGE formation but with different abilities. After SA/CAO/CAO dimer incubation, effective protection against BSA protein glycation was observed and three different MGO adducts were formed. In MGO-induced HUVEC cell models, only CAO and CAO dimer significantly inhibited oxidative stress and cell apoptosis, accompanied by the regulation of the Nrf2-HO-1 pathway. During the inhibition, 20 and 12 lipid mediators were reversed in the CAO and CAO dimer groups compared to the MGO group.

Polypropylene-Rendered Antiviral by Three-Dimensionally Surface-Grafted Poly(N-benzyl-4-vinylpyridinium bromide).

To inhibit viral infection, it is necessary for the surface of polypropylene (PP), a polymer of significant industrial relevance, to possess biocidal properties. However, due to its low surface energy, PP weakly interacts with other organic molecules. The biocidal effects of quaternary ammonium compounds (QACs) have inspired the development of nonwoven PP fibers with surface-bound quaternary ammonium (QA). Despite this advancement, there is limited knowledge regarding the durability of these coatings against scratching and abrasion. It is hypothesized that the durability could be improved if the thickness of the coating layer were controlled and increased. We herein functionalized PP with three-dimensionally surface-grafted poly(N-benzyl-4-vinylpyridinium bromide) (PBVP) by a simple and rapid method involving graft polymerization and benzylation and examined the influence of different factors on the antiviral effect of the resulting plastic by using a plaque assay. The thickness of the PBVP coating, surface roughness, and amount of QACs, which jointly determine biocidal activity, could be controlled by adjusting the duration and intensity of the ultraviolet irradiation used for grafting. The best-performing sample reduced the viral infection titer of an enveloped model virus (bacteriophage ϕ6) by approximately 5 orders of magnitude after 60 min of contact and retained its antiviral activity after surface polishing-simulated scratching and abrasion, which indicated the localization of QACs across the coating interior. Our method may expand the scope of application to resin plates as well as fibers of PP. Given that the developed approach is not limited to PP and may be applied to other low-surface-energy olefinic polymers such as polyethylene and polybutene, our work paves the way for the fabrication of a wide range of biocidal surfaces for use in diverse environments, helping to prevent viral infection.

Electroactive poly(vinylidene fluoride-trifluoroethylene)/graphene composites for cardiac tissue engineering applications.

Electroactive materials are increasingly being used in strategies to regenerate cardiac tissue. These materials, particularly those with electrical conductivity, are used to actively recreate the electromechanical nature of the cardiac tissue. In the present work, we describe a novel combination of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)), a highly electroactive polymer, with graphene (G), exhibiting high electrical conductivity. G/P(VDF-TrFE) films have been characterized in terms of topographical, physico-chemical, mechanical, electrical, and thermal properties, and studied the response of cardiomyocytes adhering to them. The results indicate that the crystallinity and the wettability of the composites remain almost unaffected after G incorporation. In turn, surface roughness, Young modulus, and electric properties are higher in G/P(VDF-TrFE). Finally, the composites are highly biocompatible and able to support cardiomyocyte adhesion and proliferation, particularly surface treated ones, demonstrating the suitability of these materials for cardiac tissue engineering applications.

The Facile Synthesis and Application of Mesoporous Silica Nanoparticles with a Vinyl Functional Group for Plastic Recycling.

Due to growing concerns about environmental pollution from plastic waste, plastic recycling research is gaining momentum. Traditional methods, such as incorporating inorganic particles, increasing cross-linking density with peroxides, and blending with silicone monomers, often improve mechanical properties but reduce flexibility for specific performance requirements. This study focuses on synthesizing silica nanoparticles with vinyl functional groups and evaluating their mechanical performance when used in recycled plastics. Silica precursors, namely sodium silicate and vinyltrimethoxysilane (VTMS), combined with a surfactant, were employed to create pores, increasing silica's surface area. The early-stage introduction of vinyl functional groups prevented the typical post-synthesis reduction in surface area. Porous silica was produced in varying quantities of VTMS, and the synthesized porous silica nanomaterials were incorporated into recycled polyethylene to induce cross-linking. Despite a decrease in surface area with increasing VTMS content, a significant surface area of 883 m2/g was achieved. In conclusion, porous silica with the right amount of vinyl content exhibited improved mechanical performance, including increased tensile strength, compared to conventional porous silica. This study shows that synthesized porous silica with integrated vinyl functional groups effectively enhances the performance of recycled plastics.

Chiral acidic molecularly imprinted polymer for enantio-separation of norepinephrine racemate.

We are looking into how well a copolymeric material made of poly (maleic acid-co-4-vinylpyridine) cross-linked with divinylbenzene can separate L-norepinephrine (L-NEP) from (±)-NEP. The initial step in this direction was the synthesis and subsequent analysis of L-NEP-maleimide chiral derivative. A 4-vinylpyridine/divinylbenzene combination was copolymerized with the resultant chiral maleimide. After heating the polymer materials in a high-alkaline environment to breakdown the connecting imide bonds, they were acidified in an HCl solution to eliminate the incorporated L-NEP species. Fourier transform infrared spectroscopy (FTIR) and a scanning electron microscope were used to examine the imprinted L-NEP-imprinted materials. The manufactured L-NEP-imprinted materials exhibited selectivity characteristics that were over 11 times greater for L-NEP than D-norepinephrine. The highest capacity observed in Langmuir adsorption studies was 170 mg/g at a pH of 7. After optical separation using a column technique, it was determined that the enantiomeric excess levels of D-norepinephrine and L-NEP in the first feeding and subsequent recovery solutions were 95% and 81%, respectively.

Fluorescent polymer as a biosensing tool for the diagnosis of microbial pathogens.

Diseases and diagnoses are predominant in the human population. Early diagnosis of etiological agents plays a vital role in the treatment of bacterial infections. Existing standard diagnostic platforms are laborious, time-consuming, and require trained personnel and cost-effective procedure, though they are producing promising results. These shortcomings have led to a thirst for rapid diagnostic procedures. Fluorescence-based diagnosis is one of the efficient rapid diagnostic methods that rely on specific and sensitive bacterial detection. Emerging bio-sensing studies on conducting polymers (CPs) are gaining popularity in medical diagnostics due to their promising properties of high fluorescence efficiency, good light stability, and low cytotoxicity. Poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), is the first identified soluble polymer and model material for understanding the fundamental photophysics of conventional CPs. In this present study, MEH-PPV is used as a fluorescent dye for direct pathogen detection applications by interacting with the microbial cell surface. An optimized concentration of MEH-PPV solution used to confirm the presence of selective bacterial structures. The present study endeavours towards bacterial detection based on the emission from bacteria due to interfacial interaction between polymer and bacterial surface.

Performance investigation of poly(vinylidene fluoride-cohexafluoropropylene) membranes containing SiO2 nanoparticles in a newly designed single vacuum membrane distillation system.

The current study focuses on the development of a superhydrophobic poly(vinylidene fluoride-cohexafluoropropylene) nanocomposite membrane suitable for vacuum membrane distillation by incorporating SiO2 nanoparticles. At loading hydrophobic nano-SiO2 particle concentration (0.50-1.50 wt.%), the developed nanocomposite membranes are optimized in terms of vacuum membrane distillation performance. The influence of temperature, vacuum pressure, and feed water flow is studied for desalinating high-salinity brine. The results show that the developed vacuum distillation membrane is capable of 95% salt rejection during the treatment of a highly saline feed (65,000 ppm) at fixed flow rates of 120 L/h saline feed and different operating conditions consisting of feed inlet temperatures ranging from 40°C to 70°C and distillate inlet temperatures of 7-15°C. The vacuum membrane distillation process achieves 0.38-1.66% water recovery with increasing concentration factor, meaning that recovery is increased, and shows a specific electrical energy consumption of 5.16-23.90 kWh/m3 for product water. Overall, the newly designed membrane demonstrates suitability for a vacuum membrane distillation system. PRACTITIONER POINTS: Desalinate high-salinity brine (TDS > 35,000 ppm) using a vacuum membrane distillation system. A hydrophobic PVDF-HFP/SiO2 nanocomposite membrane development for vacuum membrane distillation. A newly designed single vacuum membrane distillation system for RO brine treatment.

Understanding the Influence of API Conformations on Amorphous Dispersion Formation Potential Predictions using the R3m Molecular Descriptor.

The R3m molecular descriptor (R-GETAWAY third-order autocorrelation index weighted by the atomic mass) has previously been shown to encode molecular attributes that appear to be physically and chemically relevant to grouping diverse active pharmaceutical ingredients (API) according to their potential to form persistent amorphous solid dispersions (ASDs) with polyvinylpyrrolidone-vinyl acetate copolymer (PVPVA). The initial R3m dispersibility model was built by using a single three-dimensional (3D) conformation for each drug molecule. Since molecules in the amorphous state will adopt a distribution of conformations, molecular dynamics simulations were performed to sample conformations that are probable in the amorphous form, which resulted in a distribution of R3m values for each API. Although different conformations displayed R3m values that differed by as much as 0.4, the median of each R3m distribution and the value predicted from the single 3D conformation were very similar for most structures studied. The variability in R3m resulting from the distribution of conformations was incorporated into a logistic regression model for the prediction of ASD formation in PVPVA, which resulted in a refinement of the classification boundary relative to the model that only incorporated a single conformation of each API.

Maternal exposure to 4-vinylcyclohexene diepoxide during pregnancy leads to disorder of gut microbiota and bile acid metabolism in offspring.

Our previous study reveals that maternal exposure to 4-vinylcyclohexene diepoxide (VCD) during pregnancy causes insufficient ovarian follicle reserve and decreased fertility in offspring. The present study aims to further explore the reasons for the significant decline of fecundity in mice caused by VCD, and to clarify the changes of gut microbiota and microbial metabolites in F1 mice. The ovarian metabolomics, gut microbiota and microbial metabolites were analyzed. The results of ovarian metabolomics analysis showed that maternal VCD exposure during pregnancy significantly reduced the concentration of carnitine in the ovaries of F1 mice, while supplementation with carnitine (isovalerylcarnitine and valerylcarnitine) significantly increased the number of ovulation. The results of 16 S rDNA-seq and microbial metabolites analysis showed that maternal VCD exposure during pregnancy caused disordered gut microbiota, increased abundance of Parabacteroides and Flexispira bacteria that are involved in secondary bile acid synthesis. The concentrations of NorDCA, LCA-3S, DCA and other secondary bile acids increased significantly. Our results indicate that maternal exposure to VCD during pregnancy leads to disorder in gut microbiota and bile acid metabolism in F1 mice, accompanying with decreased ovarian function, providing further evidence that maternal exposure to VCD during pregnancy has intergenerational deleterious effects on offspring.

Aged and induced-premature ovarian failure mouse models affect diestrus profile and ovarian features.

Sex hormones exert a wide influence on several systems of the human body, especially in women, who undergo intense changes in the trans and postmenopausal periods. Different experimental models are used to mimic these conditions; however, the impact on hormonal profile may be different. This study aimed to analyze and compare vaginal cytology of different post-estropausal mice models, along with their microscopical ovarian features. Forty-six C57BL/6J female mice with the ages of 4, 6 and 18 months at the beginning of the experiment, weighing about 25-28 grams, constituted five groups: NC-(negative control) animals with no treatment, OVX-SHAM-sham ovariectomized, OVX-ovariectomized, VCD-medicated with 160 mg/kg/day of 4-vinylcyclohexene diepoxide via IP for 20 consecutive days, and Aged-senescent mice under physiological estropause. Euthanasia was performed at different periods for the removal of the ovaries, and after diestrus was confirmed by vaginal cytology for 10 consecutive days. For daily vaginal cytology, morphological and histomorphometric microscopic analyzes were performed. Aged mice presented significant increased neutrophils when compared to VCD group, as well as increased cornified epithelial cells when compared to OVX mice, and also increased nucleated epithelial cells when compared to VCD and OVX. NC and OVX-SHAM ovaries presented innumerous follicles at different stages of development, while VCD showed marked follicular atresia, depleted of primordial or developing follicles and a predominance of interstitial cells. The ovaries of aged mice were predominantly constituted by corpus luteum degenerated into corpus albicans, with rare antral follicles. All analyzed models led to different permanent diestrus profiles caused by each model, as indicated by ovarian features. This should be carefully considered when choosing a post-estropausal experimental model, in order to better correlate this challenging phase of female's life with physiological/pathological conditions.

Modelling drug degradation of amorphous solid dispersion during twin-screw extrusion.

Twin-screw extrusion is one of the major technologies for solid dispersion in the pharmaceutical industry. However, the thermal exposure to the drug during extrusion can easily trigger and exacerbate drug degradation. A conventional method for investigating drug degradation in extrusion is trial-and-error, which can consume much time and material. We propose to model drug degradation kinetics and combine it with thermal history simulation to predict drug degradation. Ritonavir and copovidone were used as a model system of solid dispersion. Hydantoin aminoalchol was the major degradant of RTV in extrudate. In studying the RTV degradation kinetics, only in nitrogen atmosphere, RTV degradation pathway in TGA or DSC was like the degradation pathway in extrusion. The mixing and solubilization of RTV in copovidone also prevented RTV from degrading to oxazolidine derivative. The degradation samples were collected at various temperatures and at different times. The data was fitted into first-order kinetics model to get degradation rates constant at each temperature. The degradation rate constants were fitted into the Arrhenius equation with an activation energy of 159.3 kJ/mol, and a pre-exponential of 1.23 × 1017. An array of extrusion conditions was developed and analyzed via design of experiment (DOE). Relying on the measured melt temperature and residence time after kneading element and die, we simulated the thermal history in the section between kneading element and die. The RTV degradation kinetics in conjunction with simulated thermal history predicted degradation and achieved a 78% regression.

Visible-Light-Induced Intermolecular Trifluoromethyl Heteroarylation of Vinyl Ethers for the Syntheses of ß-Trifluoromethyl Alkyl Thiochromones.

Herein, we reported a transition-metal-free three-component trifluoromethyl heteroarylation of vinyl ethers under visible light irradiation. This protocol proceeded through a radical addition/cyclization sequence which hinged on the intrinsic nucleo/electrophilic reactivity of both the radicals, alkene, and alkynones, allowing ß-trifluoromethyl alkyl thiochromones furnished with high efficiency and excellent functional group tolerance. By virtue of this procedure, three distinct chemical bonds including C(sp2)-C(sp3), C(sp3)-C(sp3), and C(sp2)-S have been successively forged in a single pot.

1,3-Difunctionalization of Propargyl Silanes with Concomitant 1,2-Silyl Shift: Synthesis of Allyl Functionalized Vinyl Silanes.

Terminal alkynes with a silyl group at the propargylic position upon activation with electrophiles such as N-bromosuccinimide undergo (E)-selective 1,2-silyl group migration. Subsequently, an allyl cation is formed that is intercepted by an external nucleophile. This approach provides allyl ethers and esters with stereochemically defined vinyl halide and silane handles for further functionalization. The scope of propargyl silanes and electrophile-nucleophile pairs are investigated, and various trisubstituted olefins are prepared in up to 78% yield. The obtained products have been demonstrated to serve as building blocks for transition-metal-catalyzed cross-couplings of vinyl halides, silicon-halogen exchange, and allyl acetate functionalization reactions.

Li-Ion Transfer Mechanism of Gel Polymer Electrolyte with Sole Fluoroethylene Carbonate Solvent.

Although gel polymer electrolytes (GPEs) represent a promising candidate to address the individual limitations of liquid and solid electrolytes, their extensive development is still hindered due to the veiled Li-ion conduction mechanism. Herein, the related mechanism in GPEs is extensively studied by developing an in situ polymerized GPE comprising fluoroethylene carbonate (FEC) solvent and carbonate ester segments (F-GPE). Practically, although with high dielectric constant, FEC fails to effectively transport Li ions when acting as the sole solvent. By sharp contrast, F-GPE demonstrates superior electrochemical performances, and the related Li-ion transfer mechanism is investigated using molecular dynamics simulations and 7 Li/6 Li solid-state nNMR spectroscopy. The polymer segments are extended with the swelling of FEC, then an electron-delocalization interface layer is generated between abundant electron-rich groups of FEC and the polymer ingredients, which works as an electron-rich "Milky Way" and facilitates the rapid transfer of Li ions by lowering the diffusion barrier dramatically, resulting in a high conductivity of 2.47 × 10-4  S cm-1 and a small polarization of about 20 mV for Li//Li symmetric cell after 8000 h. Remarkably, FEC provides high flame-retardancy and makes F-GPE remains stable under ignition and puncture tests.

Heterogeneous Metallaphotocatalytic C(sp2)-C(sp3) Cross-Coupling Reactions with Integrated Bipyridyl-Ni(II)-Carbon Nitride.

A fully heterogeneous metallaphotocatalytic C-C cross-coupling of aryl/vinyl halides with alkyl/allyltrifluoroborates has been developed by employing integrated bipyridyl-Ni(II)-carbon nitride as a stable and recyclable bifunctional catalyst. This visible-light-mediated heterogeneous protocol allows for the sustainable synthesis of diverse valuable diarylmethanes and allylarenes in high efficiency.

4-vinylcyclohexene diepoxide induces apoptosis by excessive reactive oxygen species and DNA damage in human ovarian granulosa cells.

4-Vinylcyclohexene diepoxide (VCD) is a hazardous industrial material which is widely used in the production of fragrances, rubber tires, antioxidants, pesticides, flame retardants and plasticizers. Previous studies have shown that exposure to VCD damages the female reproductive system, but the effects and mechanisms of VCD exposure on human granulosa cells are not reported. In this study, we used a human granulosa cell line (SVOG) to explore the effects of VCD exposure and found that VCD exposure had toxic effects on SVOG cells in vitro. VCD exposure led to excessive accumulation of intracellular ROS, caused DNA damage in cells, altered the expression of some key genes related with apoptosis and oxidative stress, and ultimately inhibited the proliferative capacity of granulosa cells, resulting in increased apoptosis. Overall, our findings provide solid evidence showing that VCD exposure produces severe damage to human granulosa cells, which is helpful for understanding the reproductive toxicity of VCD and etiology of infertility.

Dissolution Mechanisms of Amorphous Solid Dispersions: A Close Look at the Dissolution Interface.

Despite the recent success of amorphous solid dispersions (ASDs) at enabling the delivery of poorly soluble small molecule drugs, ASD-based dosage forms are limited by low drug loading. This is partially due to a sharp decline in drug release from the ASD at drug loadings surpassing the 'limit of congruency' (LoC). In some cases, the LoC is as low as 5% drug loading, significantly increasing the risk of pill burden. Despite efforts to understand the mechanism responsible for the LoC, a clear picture of the molecular processes occurring at the ASD/solution interface remains elusive. In this study, the ASD/solution interface was studied for two model compounds formulated as ASDs with copovidone. The evolution of a gel layer and its phase behavior was captured in situ with fluorescence confocal microscopy, where fluorescent probes were added to label the hydrophobic and hydrophilic phases. Phase separation was detected in the gel layer for most of the ASDs. The morphology of the hydrophobic phase was found to correlate with the release behavior, where a discrete phase resulted in good release and a continuous phase formed a barrier leading to poor release. The continuous phase formed at a lower drug loading for the system with stronger drug-polymer interactions. This was due to incorporation of the polymer into the hydrophobic phase. The study highlights the complex molecular and phase behavior at the ASD/solution interface of copovidone-based ASDs and provides a thermodynamic argument for qualitatively predicting the release behavior based on drug-polymer interactions.