PFOS-induced Sertoli cell injury through c-Jun N-terminal kinase (JNK) - a study by RNA-Seq.

Per- and polyfluoroalkyl substances (PFAS) are a family of "forever chemicals" including PFOS (perfluorooctane sulfonate). These toxic chemicals do not break down in the environment nor in our bodies. In the human body, PFOS and PFOA (perfluoroctanoic acid) have a half-life (T1/2) of about 4-5 years so low daily consumption of these chemicals can accumulate in the human body to a harmful level over a long period. Although the use of PFOS in consumer products was banned in the U.S. in 2022/2023, this forever chemical remains detectable in our tap water and food products. Every American tested has a high level of PFAS in their blood (https://cleanwater.org/pfas-forever-chemicals). In this report, we used a Sertoli cell blood-testis barrier (BTB) model with primary Sertoli cells cultured in vitro with an established functional tight junction (TJ)-permeability barrier that mimicked the BTB in vivo. Treatment of Sertoli cells with PFOS was found to perturb the TJ-barrier, which was the result of cytoskeletal disruption across the cell cytoplasm, disrupting actin and microtubule polymerization. These changes thus affected the proper localization of BTB-associated proteins at the BTB. Using RNA-Seq transcriptome profiling, bioinformatics analysis, and pertinent biochemical and cell biology techniques, it was discovered that PFOS-induced Sertoli cell toxicity through the c-Jun N-terminal kinase (JNK; also known as stress-activated protein kinase, SAPK) and its phosphorylated/active form p-JNK signaling pathway. More importantly, KB-R7943 mesylate (KB), a JNK/p-JNK activator, was capable of blocking PFOS-induced Sertoli cell injury, supporting the notion that PFOS-induced cell injury can possibly be therapeutically managed.

N-nitrosamines in electroplating and printing/dyeing industrial wastewater treatment plants: Removal efficiency, environmental emission, and the influence on drinking water.

The discharge of industrial wastewater containing high concentrations of N-nitrosamines to the aquatic environment can impair downstream source waters and pose potential risks to human health. However, the transport and fate of N-nitrosamines in typical industrial wastewater treatment plants (IWWTPs) and the influence of these effluents on source water and drinking water are still unclear. This study investigated nine N-nitrosamines in four full-scale electroplating (E-) and printing/dyeing (PD-) IWWTPs, two drinking water treatment plants (DWTPs) in the lower reaches of these IWWTPs, and the corresponding tap water in South China. The total concentrations of N-nitrosamines (∑NAs) were 382-10,600, 480-1920, 494-789, and 27.9-427 ng/L in influents, effluents, source water, and tap water, respectively. The compositions of N-nitrosamine species in different influents varied a lot, while N-nitrosodi-n-butylamine (NDBA) and N-nitrosodimethylamine (NDMA) dominated in most of the effluents, source water, and tap water. More than 70 % N-nitrosamines were removed by wastewater treatment processes used in E-IWWTPs such as ferric-carbon micro-electrolysis (Fe/C-ME), while only about 50 % of N-nitrosamines were removed in PD-IWWTPs due to the use of chlorine reagent or other inefficient conventional processes such as flocculation by cationic amine-based polymers or bio-contact oxidation. Therefore, the mass fluxes of N-nitrosamines discharged from these industrial wastewaters to the environment in the selected two industrial towns were up to 14,700 mg/day. The results based on correlation and principal component analysis significantly demonstrated correlations between E-and PD-effluents and source water and tap water, suggesting that these effluents can serve as sources of N-nitrosamines to local drinking water systems. This study suggests that N-nitrosamines are prevalent in typical IWWTPs, which may infect drinking water systems. The findings of this study provide a basis data for the scientific evaluation of environmental processes of N-nitrosamines.

PFOS exposure destroys the integrity of the blood-testis barrier (BTB) through PI3K/AKT/mTOR-mediated autophagy.

Perfluorooctanesulfonate or perfluorooctane sulfonic acid (PFOS), a type of perfluorinated compound, is mainly found in consumer products. Exposure to PFOS could cause male reproductive toxicity by causing injury to the blood-testis barrier (BTB). However, the specific mechanisms through which PFOS affects male reproduction remain unclear. The mammalian target of rapamycin (mTOR) is a vital protein kinase that is believed to be a central regulator of autophagy. In this study, we established in vivo and in vitro models to explore the effects of PFOS on the BTB, autophagy, and the regulatory role of the mTOR signaling pathway. Adult mice were developmentally exposed to 0, 0.5, 5, and 10 mg/kg/day PFOS for five weeks. Thereafter, their testicular morphology, sperm counts, serum testosterone, expression of BTB-related proteins, and autophagy-related proteins were evaluated. Additionally, TM4 cells (a mouse Sertoli cell line) were used to delineate the molecular mechanisms that mediate the effects of PFOS on BTB. Our results demonstrated that exposure to PFOS induced BTB injury and autophagy, as evidenced by increased expression of autophagy-related proteins, accumulation of autophagosomes, observed through representative electron micrographs, and decreased activity of the PI3K/AKT/mTOR pathway. Moreover, treatment with chloroquine, an autophagy inhibitor, alleviated the effects of PFOS on the integrity of TM4 cells in the BTB and the PI3K/AKT/mTOR pathway. Overall, this study highlights that exposure to PFOS destroys the integrity of the BTB through PI3K/AKT/mTOR-mediated autophagy.

Sperm immotility is associated with epididymis metabolism disorder in mice under obstructive azoospermia.

Obstructive azoospermia (OA) accounts for approximately 40% of males who suffer from azoospermia of male infertility. Currently, available treatment for OA consists of reproductive tract surgical reconstruction and sperm retrieval from the testis. However, both treatments result in low fertility compared to normal pregnancy, and the main reason remains largely unknown. Previous studies have shown that the quality of sperm retrieved from OA patients is poor compared with normal adult males but without an in-depth study. Herein, we generated a mouse OA model with vasectomy to evaluate sperm quality systematically. Our results showed that the testis had normal spermatogenesis but increased apoptotic activity in both OA patients and mice. More importantly, epididymal morphology was abnormal, with swollen epididymal tubules and vacuole-like principal cells. Especially, sperm retrieved from the epididymis of OA mice showed poor motility and low fertilization ability in vitro. Using mass spectrometry in epididymal fluid, we found differences in the expression of key proteins for sperm maturation, such as Angiotensinogen (AGT), rhophilin-associated tail protein 1 (ROPN1), NPC intracellular cholesterol transporter 2 (NPC2), and prominin 1 (PROM1). Furthermore, our results demonstrated that AGT, secreted by epididymal principal cells, could regulate sperm motility by managing PKCα expression to modify sperm phosphorylation. In conclusion, our data evaluate sperm quality systematically in OA mice and contribute to the understanding between the sperm and epididymis, which may provide novel insight into treating male infertility.

Strong succession in prokaryotic association networks and community assembly mechanisms in an acid mine drainage-impacted riverine ecosystem.

Acid mine drainage (AMD) serves as an ideal model system for investigating microbial ecology, interaction, and assembly mechanism in natural environments. While previous studies have explored the structure and function of microbial communities in AMD, the succession patterns of microbial association networks and underlying assembly mechanisms during natural attenuation processes remain elusive. Here, we investigated prokaryotic microbial diversity and community assembly along an AMD-impacted river, from the extremely acidic, heavily polluted headwaters to the nearly neutral downstream sites. Microbial diversity was increased along the river, and microbial community composition shifted from acidophile-dominated to freshwater taxa-dominated communities. The complexity and relative modularity of the microbial networks were also increased, indicating greater network stability during succession. Deterministic processes, including abiotic selection of pH and high contents of sulfur and iron, governed community assembly in the headwaters. Although the stochasticity ratio was increased downstream, manganese content, microbial negative cohesion, and relative modularity played important roles in shaping microbial community structure. Overall, this study provides valuable insights into the ecological processes that govern microbial community succession in AMD-impacted riverine ecosystems. These findings have important implications for in-situ remediation of AMD contamination.

Organic Cathode with Dual-Type Multielectron Reaction Centers for High-Energy-Density Lithium Primary Batteries.

Organic electrode materials are composed of abundant elements, have diverse and designable molecular structures, and are relatively easily synthesized, promising a bright future for low-cost and large-scale energy storage. However, they are facing low specific capacity and low energy density. Herein, we report a high-energy-density organic electrode material, 1,5-dinitroanthraquinone, which is composed of two kinds of electrochemically active sites of nitro and carbonyl groups. They experience six- and four-electron reduction and are transformed into amine and methylene groups, respectively, in the presence of fluoroethylene carbonate (FEC) in the electrolyte. Drastically increased specific capacity and energy density are demonstrated with an ultrahigh specific capacity of 1321 mAh g-1 and a high voltage of ∼2.62 V, corresponding to a high energy density of 3400 Wh kg-1. This surpasses the electrode materials in commercial lithium batteries. Our findings provide an effective strategy to design high-energy-density and novel lithium primary battery systems.

Achieving Practical High-Energy-Density Lithium-Metal Batteries by a Dual-Anion Regulated Electrolyte.

Lithium-metal batteries (LMBs) using lithium-metal anodes and high-voltage cathodes have been deemed as one of the most promising high-energy-density battery technology. However, its practical application is largely hindered by the notorious dendrite growth of lithium-metal anodes, the fast structure degradation of the cathode, and insufficient electrode-electrolyte interphase kinetics. Here, a dual-anion regulated electrolyte is developed for LMBs using lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) and lithium difluoro(bisoxalato)phosphate (LiDFBOP) as anion regulators. The incorporation of TFSI- in the solvation sheath reduces the desolvation energy of Li+ , and DFBOP- promotes the formation of highly ion-conductive and sustainable inorganic-rich interphases on the electrodes. Significantly enhanced performance is demonstrated on Li||LiNi0.83 Co0.11 Mn0.06 O2 pouch cells, with 84.6% capacity retention after 150 cycles in 6.0 Ah pouch cells and an ultrahigh rate capability up to 5 C in 2.0 Ah pouch cells. Furthermore, a pouch cell with an ultralarge capacity of 39.0 Ah is fabricated and achieves an ultrahigh energy density of 521.3 Wh kg-1 . The findings provide a facile electrolyte design strategy for promoting the practical utilization of high-energy-density LMBs.

From lockdown to precise prevention: Adjusting epidemic-related spatial regulations from the perspectives of the 15-minute city and spatiotemporal planning.

The COVID-19 pandemic challenged emergency management in cities worldwide. Many municipalities adopted restrictive, one-size-fits-all spatial regulations such as lockdowns without fully considering the inhabitants' daily activities and local economies. The existing epidemic regulations' unintended detrimental effects on socioeconomic sustainability necessitate a transition from the "lockdown" approach to more precise disease prevention. A spatially and temporally precise approach that balances epidemic prevention with the demands of daily activities and local economies is needed. Thus, the aim of this study was to propose a framework and key procedures for determining precise prevention regulations from the perspectives of the 15-minute city concept and spatiotemporal planning. Alternative regulations of lockdowns were determined by delineating 15-minute neighborhoods, identifying and reconfiguring facility supplies and activity demands in both normal and epidemic conditions, and performing cost-benefit analyses. Highly adaptable, spatially- and temporally-precise regulations can match the needs of different types of facilities. We demonstrated the process for determining precise prevention regulations in the case of the Jiulong 15-minute neighborhood in Beijing. Precise prevention regulations-which meet essential activity demands and are adaptable for different facility types, times, and neighborhoods-have implications for long-term urban planning and emergency management.

Electrolytes in Organic Batteries.

Organic batteries using redox-active polymers and small organic compounds have become promising candidates for next-generation energy storage devices due to the abundance, environmental benignity, and diverse nature of organic resources. To date, tremendous research efforts have been devoted to developing advanced organic electrode materials and understanding the material structure-performance correlation in organic batteries. In contrast, less attention was paid to the correlation between electrolyte structure and battery performance, despite the critical roles of electrolytes for the dissolution of organic electrode materials, the formation of the electrode-electrolyte interphase, and the solvation/desolvation of charge carriers. In this review, we discuss the prospects and challenges of organic batteries with an emphasis on electrolytes. The differences between organic and inorganic batteries in terms of electrolyte property requirements and charge storage mechanisms are elucidated. To provide a comprehensive and thorough overview of the electrolyte development in organic batteries, the electrolytes are divided into four categories including organic liquid electrolytes, aqueous electrolytes, inorganic solid electrolytes, and polymer-based electrolytes, to introduce different components, concentrations, additives, and applications in various organic batteries with different charge carriers, interphases, and separators. The perspectives and outlook for the future development of advanced electrolytes are also discussed to provide a guidance for the electrolyte design and optimization in organic batteries. We believe that this review will stimulate an in-depth study of electrolytes and accelerate the commercialization of organic batteries.

Narrow linewidth electro-optically tuned multi-channel interference widely tunable semiconductor laser.

A narrow linewidth electro-optically tuned multi-channel interference (MCI) widely tunable semiconductor laser based on carrier injection is demonstrated in this paper. The MCI laser with a common phase section and a semiconductor optical amplifier (SOA) is packaged into a 16-pin butterfly box. The laser is characterized by a strategy: shifting the longitudinal mode and then aligning the reflection peak, which obtains a quasi-continuous tuning range over 48 nm. The corresponding side mode suppression ratios (SMSRs) are higher than 40 dB and frequency deviations from ITU-grid are less than ± 1 GHz. Threshold currents are less than 28 mA. Fiber coupled output powers are higher than 20 mW and power variations with fixed gain and SOA currents are less than 0.8 dB over the whole tuning range. Lorentzian linewidths are less than 320 kHz over the entire tuning range, which is one of the lowest results for monolithic widely tunable semiconductor lasers tuned by carrier injection. These results demonstrate the potential prospects of the MCI laser with carrier injection in the field of optical sensing and optical communications.

Absence of MerTK disrupts spermatogenesis in an age-dependent manner.

Spermatogenesis is a highly specialized cell differentiation process regulated by the testicular microenvironment. During the process of spermatogenesis, phagocytosis performs an essential role in male germ cell development, and its dysfunction in the testis can cause reproduction defects. MerTK, as a critical protein of phagocytosis, facilitates the removal of apoptotic substrates from the retina and ovaries through cooperation with several phagocytosis receptors. However, its role in mammalian spermatogenesis remains undefined. Here, we found that 30-week-old MerTK-/- male mice developed oligoasthenospermia due to abnormal spermatogenesis. These mice showed damaged seminiferous tubule structure, as well as altered spermatogonia proliferation and differentiation. We also found that Sertoli cells from MerTK-/- mice had decreased phagocytic activity on apoptotic germ cells in vitro. Moreover, a transcriptomic analysis demonstrated that the pivotal genes involved in spermatid differentiation and development changed expression. These results indicate that MerTK is crucial for spermatogenesis, as it regulates the crosstalk between germ cells and Sertoli cells. This provides us insight into the molecular mechanism of MerTK on spermatogenesis and its implications for the diagnosis and treatment of human male infertility.

Visualizing the uneven accessibility to nucleic acid testing services in Shenzhen under China's COVID control measures.

Under China's "dynamic zero" COVID-19 policy, Shenzhen required its residents to present a negative nucleic acid testing result within 24 or 48 h to access most public spaces and transit until most recently. The uneven accessibility to testing services could render certain groups vulnerable to mobility disadvantage (e.g., denied access to public transport). Using data of nucleic acid testing services and residents' positioning points, I created a cartogram to capture the spatial distribution of people's activities and that of testing services in Shenzhen. The cartogram indicates that the nucleic acid testing services were spatially concentrated in a way inconsistent with the distribution of people's daily activities. Several girds exhibit high presence of activities but low or no provision of testing services that were necessary for residents to accessing public spaces and transport. The cartogram casts light to potential consequence of regular nucleic acid testing on mobility equality.

Treatment of experimental autoimmune encephalomyelitis using AAV gene therapy by blocking T cell costimulatory pathways.

Multiple sclerosis (MS) is a chronic autoimmune disease of the central nervous system (CNS), characterized by inflammation and demyelination. Presently, repeated relapses of MS necessitate long-term immune-regulatory therapy. Blocking the CD28-B7 and CD40-CD40L costimulatory pathways is an effective and synergistic method for the prevention and amelioration of clinical symptoms of experimental autoimmune encephalomyelitis (EAE), a mouse model of MS. In this study, to explore the efficacy and safety of MS gene therapy, we used adeno-associated virus (AAV) as a vector to deliver CTLA4-immunoglobulin (Ig) or CD40-Ig on the EAE induced by myelin oligodendrocyte glycoprotein (MOG). Our results showed that a single administration of AAV8-CTLA4-Ig, either alone or with AAV8-CD40-Ig, protected mice from EAE and reversed disease progression. Decreased CD4+ and CD8+ T cell infiltration, inhibition of MOG antibody response, and downregulation of neuroinflammation were observed in mice receiving AAV, suggesting that autoimmunity was suppressed in EAE pathology. Moreover, no hematological or hepatic toxicity was observed in AAV-treated mice. Thus, compared with treatment with recombinant CTLA4-Ig (belatacept), AAV gene therapy could effectively control clinical symptoms and suppress autoimmunity in the long term. In summary, our study provides a potential therapeutic method for blocking T cell costimulation for the treatment of MS via gene therapy.

Re-vegetation Improves Soil Quality by Decreasing Soil Conductivity and Altering Soil Microbial Communities: A Case Study of an Opencast Coal Mine in the Helan Mountains.

Microbial communities constitute a diverse genetic resource pool in the soil and are key indicators of soil health and quality. How re-vegetation affects soil microbial diversity and community composition at the dump of an opencast coal mine is largely unknown. Using high-throughput sequencing, we performed a comparative study of the bacterial and fungal communities from non-vegetated (bare land) soil and from areas re-vegetated by Astragalus laxmannii, Halogeton arachnoideus, and Artemisia desertorum at an opencast coal mine in the Helan Mountains in western China. These results indicated that re-vegetation significantly reduced soil conductivity. The soils re-vegetated by all three plant species showed greater richness of bacterial species than the bare land, and soils re-vegetated with A. desertorum and A. laxmannii showed significantly greater richness of fungal species than bare land. The bacterial and fungal ß-diversity values differed significantly between vegetated and non-vegetated soil, and these differences were more pronounced for bacterial communities than for fungal communities. Re-vegetation significantly increased the relative abundances of Proteobacteria and Bacteroidota and decreased the relative abundance of Chloroflexi. The decreasing soil conductivity that occurred with re-vegetation was found to be an important environmental determinant of the soil microbial community. This study provides evidence that re-vegetation may enhance soil quality via decreasing soil conductivity and altering the soil microbial community, and A. laxmannii was found to be a more effective species than H. arachnoideus or A. desertorum with respect to decreasing soil conductivity and altering the soil microbial communities in the Opencast Coal Mine arid region. This work may provide a helpful guideline for selection of plant species for re-vegetation projects.

A nitroaromatic cathode with an ultrahigh energy density based on six-electron reaction per nitro group for lithium batteries.

Organic electrode materials have emerged as promising alternatives to conventional inorganic materials because of their structural diversity and environmental friendliness feature. However, their low energy densities, limited by the single-electron reaction per active group, have plagued the practical applications. Here, we report a nitroaromatic cathode that performs a six-electron reaction per nitro group, drastically improving the specific capacity and energy density compared with the organic electrodes based on single-electron reactions. Based on such a reaction mechanism, the organic cathode of 1,5-dinitronaphthalene demonstrates an ultrahigh specific capacity of 1,338 mAh⋅g-1 and energy density of 3,273 Wh⋅kg-1, which surpass all existing organic cathodes. The reaction path was verified as a conversion from nitro to amino groups. Our findings open up a pathway, in terms of battery chemistry, for ultrahigh-energy-density Li-organic batteries.

Soluble Organic Cathodes Enable Long Cycle Life, High Rate, and Wide-Temperature Lithium-Ion Batteries.

Organic electrode materials free of rare transition metal elements are promising for sustainable, cost-effective, and environmentally benign battery chemistries. However, severe shuttling effect caused by the dissolution of active materials in liquid electrolytes results in fast capacity decay, limiting their practical applications. Here, using a gel polymer electrolyte (GPE) that is in situ formed on Nafion-coated separators, the shuttle reaction of organic electrodes is eliminated while maintaining the electrochemical performance. The synergy of physical confinement by GPE with tunable polymer structure and charge repulsion of the Nafion-coated separator substantially prevents the soluble organic electrode materials with different molecular sizes from shuttling. A soluble small-molecule organic electrode material of 1,3,5-tri(9,10-anthraquinonyl)benzene demonstrates exceptional electrochemical performance with an ultra-long cycle life of 10 000 cycles, excellent rate capability of 203 mAh g-1 at 100 C, and a wide working temperature range from -70 to 100 °C based on the solid-liquid conversion chemistry, which outperforms all previously reported organic cathode materials. The shielding capability of GPE can be designed and tailored toward organic electrodes with different molecular sizes, thus providing a universal resolution to the shuttling effect that all soluble electrode materials suffer.

A poorly soluble organic electrode material for high energy density lithium primary batteries based on a multi-electron reduction.

Here we report an organic cathode material with poor solubility for lithium primary batteries, i.e. indeno[3,2-b]fluorene-6,12-dione. Each carbonyl group experiences a four-electron reduction to a methylene group, resulting in a high energy density of 1392 W h kg-1, which is among the best results for organic electrode materials.

Optimization of Monomer Molecular Structure for Polymer Electrodes Fabricated through in-situ Electro-Polymerization Strategy.

In-situ electro-polymerization of redox-active monomers has been proved to be a novel and facile strategy to prepare polymer electrodes with superior electrochemical performance. The monomer molecular structure would have a profound impact on electro-polymerization behavior and thus electrochemical performance. However, this impact is poorly understood and has barely been investigated yet. Herein, three carbazole-based monomers, 9-phenylcarbazole (CB), 1,4-bis(carbazol-9-yl)benzene (DCB), and 2,6-bis(carbazol-9-yl)naphthalene (DCN), were applied to study the above issue systematically and achieve excellent long cycle performance. The monomers were rationally designed with different polymerizable sites and solubilities. It was found that a monomer with increased polymerizable sites and decreased solubility brought about enhanced electrochemical performance. This is because poor solubility could enhance utilization of the monomer for polymerization and more polymerizable sites could lead to a stable crosslinked polymer network after electro-polymerization. DCN with four polymerizable sites and the poorest solubility displayed the best electrochemical performance, which showed stable cycling up to 5000 cycles with high capacity retention of 76.2 % (among the best cycle in the literature). Our work for the first time reveals the relationship between monomer structure and in-situ electro-polymerization behavior. This work could shed light on the structure design/optimization of monomers for high-performance polymer electrodes prepared through in-situ electro-polymerization.

Vangl2 limits chaperone-mediated autophagy to balance osteogenic differentiation in mesenchymal stem cells.

Lysosomes are the recycling center and nutrient signaling hub of the cell. Here, we show that lysosomes also control mesenchymal stem cell (MSC) differentiation by proteomic reprogramming. The chaperone-mediated autophagy (CMA) lysosome subgroup promotes osteogenesis, while suppressing adipogenesis, by selectively removing osteogenesis-deterring factors, especially master transcriptional factors, such as adipogenic TLE3, ZNF423, and chondrogenic SOX9. The activity of the CMA-committed lysosomes in MSCs are controlled by Van-Gogh-like 2 (Vangl2) at lysosomes. Vangl2 directly binds to lysosome-associated membrane protein 2A (LAMP-2A) and targets it for degradation. MSC-specific Vangl2 ablation in mice increases LAMP-2A expression and CMA-lysosome numbers, promoting bone formation while reducing marrow fat. The Vangl2:LAMP-2A ratio in MSCs correlates inversely with the capacity of the cells for osteoblastic differentiation in humans and mice. These findings demonstrate a critical role for lysosomes in MSC lineage acquisition and establish Vangl2-LAMP-2A signaling as a critical control mechanism.