Assessment of cone-beam CT technical image quality indicators and radiation dose for optimal STL model used in visual surgical planning.

OBJECTIVES: The aim of this study was to identify cone-beam computed tomography (CBCT) protocols that offer an optimal balance between effective dose and 3D model for orthognathic virtual surgery planning, using CT as a reference, and to assess whether such protocols can be defined based on technical image quality metrics. METHODS: Eleven CBCT (VISO G7, Planmeca Oy, Helsinki, Finland) scan protocols were selected out of 32 candidate protocols, based on effective dose and technical image quality measurements. Next, an anthropomorphic RANDO SK150 phantom was scanned using these 11 CBCT protocols and 2 CT scanners for bone quantity assessments. The resulting DICOM files were converted into STL models that were used for bone volume and area measurements in the predefined orbital region to assess the validity of each CBCT protocol for VSP. RESULTS: The highest CBCT bone volume and area of the STL models were obtained using normal dose protocol (F2) and ULD protocol (J13) which resulted in 48% and 96% of the mean STL bone volume and 48% and 95% of the bone area measured on CT scanners, respectively. CONCLUSIONS: The optimal normal dose CBCT protocol" F2" offered optimal bone area and volume balance for STL. The optimal CBCT protocol can be defined exhibited similar using CNR and MTF values that were similar with of those of the reference CT scanners'. CBCT scanner with selected protocols can offer a viable alternative to CT scanners for acquiring STL models for VSP at a lower effective dose.

Assessing Patient Radiation Exposure in Endoscopic Retrograde Cholangiopancreatography: A Multicenter Retrospective Analysis of Procedural Complexity and Clinical Factors.

BACKGROUND AND AIMS: Endoscopic retrograde cholangiopancreatography (ERCP) procedures can result in significant patient radiation exposure. This retrospective multicenter study aimed to assess the influence of procedural complexity and other clinical factors on radiation exposure in ERCP. METHODS: Data on kerma-area product (KAP), air-kerma at the reference point (Ka,r), fluoroscopy time, and the number of exposures, and relevant patient, procedure, and operator factors were collected from 2641 ERCP procedures performed at four university hospitals. The influence of procedural complexity, assessed using the American Society for Gastrointestinal Endoscopy (ASGE) and HOUSE complexity grading scales, on radiation exposure quantities was analyzed within each center. The procedures were categorized into two groups based on ERCP indications: primary sclerosing cholangitis (PSC) and other ERCPs. RESULTS: Both the ASGE and HOUSE complexity grading scales had a significant impact on radiation exposure quantities. Remarkably, there was up to a 50-fold difference in dose quantities observed across the participating centers. For non-PSC ERCP procedures, the median KAP ranged from 0.9 to 64.4 Gy·cm2 among the centers. The individual endoscopist also had a substantial influence on radiation dose. CONCLUSIONS: Procedural complexity grading in ERCP significantly affects radiation exposure. Higher procedural complexity is typically associated with increased patient radiation dose. The ASGE complexity grading scale demonstrated greater sensitivity to changes in radiation exposure compared to the HOUSE grading scale. Additionally, significant variations in dose indices, fluoroscopy times, and number of exposures were observed across the participating centers.

Myocardial T1 mapping by cardiac magnetic resonance imaging shows early myocardial changes in treatment-naive patients with active rheumatoid arthritis and positive autoantibodies.

OBJECTIVES: We aimed to study whether myocardial changes are already detectable by cardiac magnetic resonance (CMR) imaging at the time of rheumatoid arthritis (RA) diagnosis. METHODS: This single-centre prospective study included 39 treatment-naive patients with early rheumatoid arthritis (ERA, symptom duration <1 year) without any history of heart disease, and 38 age- and sex-matched healthy volunteers. The disease severity was assessed with clinical evaluation (Disease Activity Score-28 for Rheumatoid Arthritis with CRP (DAS28-CRP) score) and serological testing (rheumatoid factor (RF) and anti-citrullinated protein antibodies (ACPA)). The ERA patients were classified into group A (DAS28-CRP score ≥3.2, positive RF and ACPA; n=17) and group B (not fulfilling the group A criteria). The ERA patients and healthy controls underwent 1.5T CMR. RESULTS: Group A patients had significantly higher myocardial global T1 relaxation times than the healthy controls, 987 [965, 1003] ms vs. 979 [960, 991] ms (median [IQR]; p=0.041). A significant difference in T1 was found in the basal, mid inferior and mid anterolateral segments. In a multivariate analysis, prolonged global T1 relaxation time was independently associated with female sex (95% CI [5.62, 51.31] ms, p=0.016), and group A status (95% CI [4.65, 39.01] ms p=0.014). CONCLUSIONS: At the time of diagnosis, ERA patients with a higher disease activity (DAS28-CRP score ≥3.2) and both positive RF and ACPA showed prolonged T1 relaxation times in basal myocardial segments. These segments could be most susceptible to the development of myocardial fibrosis, and a segmental reporting style could be useful when estimating the first signs of myocardial fibrosis.

The Effect of a Suspended Radiation Protection System on Occupational Radiation Doses During Infrarenal EVAR Procedures: A Randomised Controlled Study.

OBJECTIVE: To compare the protective effect of Zero Gravity (ZG) with conventional radiation protection during endovascular aneurysm repair (EVAR). Secondly, user experience was surveyed with a questionnaire on ergonomics. METHODS: This was a single centre, prospective, randomised, two arm trial where 71 consecutive elective infrarenal EVAR procedures were randomised into two groups: (1) operator using ZG and assistant using conventional protection (n = 36), and (2) operator and assistant using conventional radiation protection (n = 35). A movable floor unit ZG system consists of a lead shield (1.0 mm Pb equivalent) for the front of the body and 0.5 mm Pb equivalent acrylic shielding for the head and neck. The ZG also includes arm flaps of 0.5 mm Pb equivalent covering the arm up to the elbow. Deep dose equivalent values, Hp(10) were measured with direct ion storage dosimeters (DIS) placed on various anatomical regions of the operator (axilla, chest, abdomen, and lower leg). Personal dose equivalent values, Hp(3) to eye lenses were measured in the operating and assisting surgeon using thermoluminescence dosimeters. The study was registered at the US National Institute of Health #NCT04078165. RESULTS: Protection with the standard protection was superior in chest (0.0 vs. 0.1 µSv), abdomen (0.0 vs. 0.6 µSv), and lower leg (0.4 vs. 2.2 µSv) (p < .001). On the other hand, the ZG system yielded better shielding for the axilla (1.5 vs. 0.0 µSv) and eyes (6.3 vs. 1.1 µSv) of the operator. The use of ZG hampered the deployment of ancillary shields, which is particularly relevant for protection of the assisting surgeon. Users found ZG more cumbersome than conventional garments, it also impaired communication and reduced field of view. CONCLUSION: Both ZG and conventional radiation protection reduced radiation exposure. Conventional protection allows better manoeuvrability at the price of wider exposure of the upper arm and axilla. ZG indirectly impaired protection of the assistant.

Automatic chest computed tomography image noise quantification using deep learning.

PURPOSE: This study aimed to develop a deep learning (DL) method for noise quantification for clinical chest computed tomography (CT) images without the need for repeated scanning or homogeneous tissue regions. METHODS: A comprehensive phantom CT dataset (three dose levels, six reconstruction methods, amounting to 9240 slices) was acquired and used to train a convolutional neural network (CNN) to output an estimate of local image noise standard deviations (SD) from a single CT scan input. The CNN model consisting of seven convolutional layers was trained on the phantom image dataset representing a range of scan parameters and was tested with phantom images acquired in a variety of different scan conditions, as well as publicly available chest CT images to produce clinical noise SD maps. RESULTS: Noise SD maps predicted by the CNN agreed well with the ground truth both visually and numerically in the phantom dataset (errors of < 5 HU for most scan parameter combinations). In addition, the noise SD estimates obtained from clinical chest CT images were similar to running-average based reference estimates in areas without prominent tissue interfaces. CONCLUSIONS: Predicting local noise magnitudes without the need for repeated scans is feasible using DL. Our implementation trained with phantom data was successfully applied to open-source clinical data with heterogeneous tissue borders and textures. We suggest that automatic DL noise mapping from clinical patient images could be used as a tool for objective CT image quality estimation and protocol optimization.

Intraoperative CBCT imaging in endovascular abdomen aneurysm repair - Optimization of exposure parameters using a stent phantom.

Cone beam computed tomography (CBCT) may provide essential additional image guidance to endovascular abdominal aneurysm repair (EVAR) operations but also significant radiation exposure to patients if scans are not carefully optimized. The purpose of our study was to define the image quality requirements for intraoperative EVAR CBCT imaging and to optimize the CBCT exposure parameters accordingly. A Multi-Energy CT phantom simulating a large patient was used by replacing the central phantom cylinder with a custom water-filled insert including an EVAR stent. Different exposure parameters covering a range of radiation qualities and dose levels were used to define the optimal image quality level regarding stent graft evaluation (compressed, bent, or collapsed). The radiation dose was measured with a calibrated air kerma-area product (KAP) meter and organ doses were calculated based on Monte Carlo simulations and a mathematical patient model. Based on the results, updated exposure parameters with the highest mean energy and lowest dose level available were recommended. With the updated protocol, the radiation exposure could be significantly decreased. The KAP value decreased from 9720 µGy·m2 to 440 µGy·m2 and reference point air kerma from 351 mGy to 16 mGy (a reduction of 96%) and organ doses of the organs in the irradiated region decreased on an average 91%. The new protocol resulted in acceptable clinical image quality based on testing with clinical cases.

Occupational radiation dose from gastrointestinal endoscopy procedures with special emphasis on eye lens doses in endoscopic retrograde cholangiopancreatography.

Background and study aims Endoscopic retrograde cholangiopancreatography (ERCP) procedures may result in remarkable radiation doses to patients and staff. The aim of this prospective study was to determine occupational exposures in gastrointestinal endoscopy procedures, with a special emphasis on eye lens dose in ERCP. Methods Altogether 604 fluoroscopy-guided procedures, of which 560 were ERCPs belonging to four American Society for Gastrointestinal Endoscopy procedural complexity levels, were performed using two fluoroscopy systems. Personal deep-dose equivalent H p (10), shallow-dose equivalent H p (0.07), and eye lens dose equivalent H p (3) of eight interventionists and H p (3) for two nurse dosimeters were measured. Thereafter, conversion coefficients from kerma-area product (KAP) for H p (10), H p (0.07), and H p (3) were determined and dose equivalents per procedure to an operator and assisting staff were estimated. Further, mean conversion factors from H p (10) and H p (0.07) to H p (3) were calculated. Results The median KAP in ERCP was 1.0 Gy·cm 2 , with mobile c-arm yielding higher doses than a floor-mounted device ( P  < 0.001). The median H p (3) per ERCP was estimated to be 0.6 µSv (max. 12.5 µSv) and 0.4 µSv (max. 12.2 µSv) for operators and assisting staff, respectively. The median H p (10) and H p (0.07) per procedure ranged from 0.6 to 1.8 µSv. ERCP procedural complexity level ( P  ≤ 0.002) and interventionist ( P  < 0.001) affected dose equivalents. Conclusions Occupational dose limits are unlikely to be exceeded in gastrointestinal endoscopy practice when following radiation-hygienic working methods and focusing on dose optimization. The eye lens dose equivalent H p (3) may be estimated with sufficient agreement from the H p (10) and H p (0.07).

Postoperative computed tomography imaging of pediatric patients with craniosynostosis: radiation dose and image quality comparison between multi-slice computed tomography and O-arm cone-beam computed tomography.

BACKGROUND: When postoperative multi-slice computed tomography (MSCT) imaging of patients with craniosynostosis is used, it is usually performed a few days after surgery in a radiology department. This requires additional anesthesia for the patient. Recently, intraoperative mobile cone-beam CT (CBCT) devices have gained popularity for orthopedic and neurosurgical procedures, which allows postoperative CT imaging in the operating room. OBJECTIVE: This single-center retrospective study compared radiation dose and image quality of postoperative imaging performed using conventional MSCT scanners and O-arm CBCT. MATERIALS AND METHODS: A total of 104 pediatric syndromic and non-syndromic patients who were operated on because of single- or multiple-suture craniosynostosis were included in this study. The mean volumetric CT dose index (CTDIvol) and dose-length product (DLP) values of optimized craniosynostosis CT examinations (58 MSCT and 46 CBCT) were compared. Two surgeons evaluated the subjective image quality. RESULTS: CBCT resulted in significantly lower CTDIvol (up to 14%) and DLP (up to 33%) compared to MSCT. Multi-slice CT image quality was considered superior to CBCT scans. However, all scans were considered to be of sufficient quality for diagnosis. CONCLUSION: The O-arm device allowed for an immediate postoperative CBCT examination in the operating theater using the same anesthesia induction. Radiation exposure was lower in CBCT compared to MSCT scans, thus further encouraging the use of O-arms. Cone-beam CT imaging with an O-arm is a feasible method for postoperative craniosynostosis imaging, yielding less anesthesia to patients, lower health costs and the possibility to immediately evaluate results of the surgical operation.

Reducing cardiac implantable electronic device-induced artefacts in cardiac magnetic resonance imaging.

OBJECTIVES: Cardiac implantable electronic device (CIED)-induced metal artefacts possibly significantly diminish the diagnostic value of magnetic resonance imaging (MRI), particularly cardiac MR (CMR). Right-sided generator implantation, wideband late-gadolinium enhancement (LGE) technique and raising the ipsilateral arm to the generator during CMR scanning may reduce the CIED-induced image artefacts. We assessed the impact of generator location and the arm-raised imaging position on the CIED-induced artefacts in CMR. METHODS: We included all clinically indicated CMRs performed on patients with normal cardiac anatomy and a permanent CIED with endocardial pacing leads between November 2011 and October 2019 in our institution (n = 171). We analysed cine and LGE sequences using the American Heart Association 17-segment model for the presence of artefacts. RESULTS: Right-sided generator implantation and arm-raised imaging associated with a significantly increased number of artefact-free segments. In patients with a right-sided pacemaker, the median percentage of artefact-free segments in short-axis balanced steady-state free precession LGE was 93.8% (IQR 9.4%, n = 53) compared with 78.1% (IQR 20.3%, n = 58) for left-sided pacemaker (p < 0.001). In patients with a left-sided implantable cardioverter-defibrillator, the median percentage of artefact-free segments reached 87.5% (IQR 6.3%, n = 9) using arm-raised imaging, which fell to 62.5% (IQR 34.4%, n = 9) using arm-down imaging in spoiled gradient echo short-axis cine (p = 0.02). CONCLUSIONS: Arm-raised imaging represents a straightforward method to reduce CMR artefacts in patients with left-sided generators and can be used alongside other image quality improvement methods. Right-sided generator implantation could be considered in CIED patients requiring subsequent CMR imaging to ensure sufficient image quality. KEY POINTS: • Cardiac implantable electronic device (CIED)-induced metal artefacts may significantly diminish the diagnostic value of an MRI, particularly in cardiac MRIs. • Raising the ipsilateral arm relative to the CIED generator is a cost-free, straightforward method to significantly reduce CIED-induced artefacts on cardiac MRIs in patients with a left-sided generator. • Right-sided generator implantation reduces artefacts compared with left-sided implantation and could be considered in CIED patients requiring subsequent cardiac MRIs to ensure adequate image quality in the future.

Comparing image quality of five breast tomosynthesis systems based on radiologists' reviews of phantom data.

BACKGROUND: Previous studies have shown differences in technical image quality between digital breast tomosynthesis (DBT) systems. However, quantitative image quality measurements may not necessarily fully reflect the clinical performance of DBT. PURPOSE: To study the subjective image quality of five DBT systems manufactured by Fujifilm, GE, Hologic, Planmed, and Siemens using phantom images. MATERIAL AND METHODS: A TOR MAM test object with polymethyl methacrylate plates was imaged on five DBT systems from different vendors. Three DBT acquisitions were performed at mean glandular doses of 1.0 mGy, 2.0 mGy, and 3.5 mGy while maintaining a constant phantom set-up. Eight DBT acquisitions with different test plate positions and phantom set-up thicknesses were performed at clinically applied dose levels. Additionally, three conventional two-dimensional mammogram images were acquired with different phantom thicknesses. Six radiologists ranked the systems based on the visibilities of the targets seen in the phantom images. RESULTS: In the DBT acquisitions performed at comparable dose levels, one system differed significantly from all other systems in microcalcification scores. When using site-specific DBT protocols, significant differences were found between the devices for microcalcification, filament, and low-contrast targets. A strong correlation was observed between the reviewer scores and radiation doses in DBT acquisitions, whereas no such correlation was observed in the 2D acquisitions. CONCLUSION: In DBT acquisitions, dose level was found to be a major factor explaining image quality differences between the systems, regardless of other acquisition parameters. Most DBT systems performed equally well at similar dose levels.

Convolutional neural network -based phantom image scoring for mammography quality control.

BACKGROUND: Visual evaluation of phantom images is an important, but time-consuming part of mammography quality control (QC). Consistent scoring of phantom images over the device's lifetime is highly desirable. Recently, convolutional neural networks (CNNs) have been applied to a wide range of image classification problems, performing with a high accuracy. The purpose of this study was to automate mammography QC phantom scoring task by training CNN models to mimic a human reviewer. METHODS: Eight CNN variations consisting of three to ten convolutional layers were trained for detecting targets (fibres, microcalcifications and masses) in American College of Radiology (ACR) accreditation phantom images and the results were compared with human scoring. Regular and artificially degraded/improved QC phantom images from eight mammography devices were visually evaluated by one reviewer. These images were used in training the CNN models. A separate test set consisted of daily QC images from the eight devices and separately acquired images with varying dose levels. These were scored by four reviewers and considered the ground truth for CNN performance testing. RESULTS: Although hyper-parameter search space was limited, an optimal network depth after which additional layers resulted in decreased accuracy was identified. The highest scoring accuracy (95%) was achieved with the CNN consisting of six convolutional layers. The highest deviation between the CNN and the reviewers was found at lowest dose levels. No significant difference emerged between the visual reviews and CNN results except in case of smallest masses. CONCLUSION: A CNN-based automatic mammography QC phantom scoring system can score phantom images in a good agreement with human reviewers, and can therefore be of benefit in mammography QC.

The impact of vertical off-centering on image noise and breast dose in chest CT with organ-based tube current modulation: A phantom study.

PURPOSE: To determine the effects of patient vertical off-centering when using organ-based tube current modulation (OBTCM) in chest computed tomography (CT) with focus on breast dose. MATERIALS AND METHODS: An anthropomorphic adult female phantom with two different breast attachment sizes was scanned on GE Revolution EVO and Siemens Definition Edge CT systems using clinical chest CT protocols and anterior-to-posterior scouts. Scans with and without OBTCM were performed at different table heights (GE: centered, ±6 cm, and ± 3 cm; Siemens: centered, -6 cm, and ± 3 cm). The dose effects were studied with metal-oxidesemiconductor field-effect transistor dosimeters with complementary Monte Carlo simulations to determine full dose maps. Changes in image noise were studied using standard deviations of subtraction images from repeated acquisitions without dosimeters. RESULTS: Patient off-centering affected both the behavior of the normal tube current modulation as well as the extent of the OBTCM. Generally, both OBTCM techniques provided a substantial decrease in the breast doses (up to 30% local decrease). Lateral breast regions may, however, in some cases receive higher doses when OBTCM is enabled. This effect becomes more prominent when the patient is centered too low in the CT gantry. Changes in noise roughly followed the expected inverse of the change in dose. CONCLUSIONS: Patient off-centering was shown to affect the outcome of OBTCM in chest CT examination, and on some occasions, resulting in higher exposure. The use of modern dose optimization tools such as OBTCM emphasizes the importance of proper centering when preparing patients to CT scans.

Cardiac Magnetic Resonance Imaging-Based Screening for Cardiac Sarcoidosis in Patients With Atrioventricular Block Requiring Temporary Pacing.

Background Some myocardial diseases, such as cardiac sarcoidosis, predispose to complete atrioventricular block. The European Society of Cardiology Guidelines on cardiac pacing in 2021 recommend myocardial disease screening in patients with conduction disorder requiring pacemaker with multimodality imaging, including cardiac magnetic resonance (CMR) imaging. The ability of CMR imaging to detect myocardial disease in patients with a temporary pacing wire is not well documented. Methods and Results Our myocardial disease screening protocol is based on using an active fixation pacing lead connected to a reusable extracorporeal pacing generator (temporary permanent pacemaker) as a bridge to a permanent pacemaker. From 2011 to 2019, we identified 17 patients from our CMR database who underwent CMR imaging with a temporary permanent pacemaker for atrioventricular block. We analyzed their clinical presentations, CMR data, and pacemaker therapy. All CMRs were performed without adverse events. Pacing leads induced minor artifacts to the septal myocardial segments. The extent of late gadolinium enhancement in CMR imaging was used to screen patients for the presence of myocardial disease. Patients with evidence of late gadolinium enhancement underwent endomyocardial biopsy. If considered clinically indicated, also 18-F-fluorodeoxyglucose positron emission tomography and extracardiac tissue biopsy were performed if sarcoidosis was suspected. Eventually, 8 of 17 patients (47.1%) were diagnosed with histologically confirmed granulomatous inflammatory cardiac disease. Importantly, only 1 had a previously diagnosed extracardiac sarcoidosis at the time of presentation with high-degree atrioventricular block. Conclusions CMR imaging with temporary permanent pacemaker protocol is an effective and safe early screening tool for myocardial disease in patients presenting with atrioventricular block requiring immediate, continuous pacing for bradycardia.

Automatic head computed tomography image noise quantification with deep learning.

PURPOSE: Computed tomography (CT) image noise is usually determined by standard deviation (SD) of pixel values from uniform image regions. This study investigates how deep learning (DL) could be applied in head CT image noise estimation. METHODS: Two approaches were investigated for noise image estimation of a single acquisition image: direct noise image estimation using supervised DnCNN convolutional neural network (CNN) architecture, and subtraction of a denoised image estimated with denoising UNet-CNN experimented with supervised and unsupervised noise2noise training approaches. Noise was assessed with local SD maps using 3D- and 2D-CNN architectures. Anthropomorphic phantom CT image dataset (N = 9 scans, 3 repetitions) was used for DL-model comparisons. Mean square error (MSE) and mean absolute percentage errors (MAPE) of SD values were determined using the SD values of subtraction images as ground truth. Open-source clinical head CT low-dose dataset (Ntrain = 37, Ntest = 10 subjects) were used to demonstrate DL applicability in noise estimation from manually labeled uniform regions and in automated noise and contrast assessment. RESULTS: The direct SD estimation using 3D-CNN was the most accurate assessment method when comparing in phantom dataset (MAPE = 15.5%, MSE = 6.3HU). Unsupervised noise2noise approach provided only slightly inferior results (MAPE = 20.2%, MSE = 13.7HU). 2DCNN and unsupervised UNet models provided the smallest MSE on clinical labeled uniform regions. CONCLUSIONS: DL-based clinical image assessment is feasible and provides acceptable accuracy as compared to true image noise. Noise2noise approach may be feasible in clinical use where no ground truth data is available. Noise estimation combined with tissue segmentation may enable more comprehensive image quality characterization.

Magnetic resonance imaging safety in patients with abandoned or functioning epicardial pacing leads.

OBJECTIVES: The European Society of Cardiology Guidelines on cardiac pacing from 2021 allow magnetic resonance imaging (MRI) in patients with cardiac implantable electronic devices (CIEDs) but do not recommend MRI in patients with epicardial pacing leads. The clinical dilemma remains whether performing an MRI in patients with CIED and epicardial leads is safe. We aimed to evaluate the safety of performing an MRI in patients with CIED and abandoned or functioning epicardial pacing leads. METHODS: We included all adult patients who underwent clinically indicated MRIs with CIED and functioning or abandoned epicardial leads in a single tertiary hospital between November 2011 and October 2019. The data were retrospectively collected. RESULTS: Twenty-six MRIs were performed on 17 patients with functioning or abandoned epicardial pacing leads. Sixty-nine percent of the MRI scans (18/26) were conducted on patients with functioning epicardial pacing leads. A definite adverse event occurred in one MRI scan. This was a transient elevation of the pacing threshold in a patient with a functioning epicardial ventricular pacing lead implanted 29 years previously. An irreversible atrial pacing lead impedance elevation was detected 6 months after the MRI in another patient; the association with the previous MRI remained unclear. No adverse events were detected in MRIs performed on patients with modern (implanted in 2000 or later) functioning epicardial leads. CONCLUSIONS: MRIs in patients with CIED and modern functioning epicardial pacing leads were performed without detectable adverse events. Further large-scale studies are necessary to confirm MRI safety in patients with epicardial pacing leads. KEY POINTS: • Currently, MRI in patients with cardiac implantable electronic devices (CIEDs) and functioning or abandoned epicardial pacing leads is not recommended. • MRIs in patients with CIED and modern functioning epicardial leads (implanted in 2000 or later) were performed without detectable adverse events in our patient cohort. • Allowing MRI in patients with epicardial pacing leads may significantly improve the diagnostic work-up, especially in specific patient groups, such as patients with congenital heart disease.

Peak flow measurements in patients with severe aortic stenosis: a prospective comparative study between cardiovascular magnetic resonance 2D and 4D flow and transthoracic echocardiography.

BACKGROUND: Aortic valve stenosis (AS) is the most prevalent valvular disease in the developed countries. Four-dimensional (4D) flow cardiovascular magnetic resonance (CMR) is an emerging imaging technique, which has been suggested to improve the evaluation of AS severity compared to two-dimensional (2D) flow and transthoracic echocardiography (TTE). We investigated the reliability of CMR 2D flow and 4D flow techniques in measuring aortic transvalvular peak systolic flow in patients with severe AS. METHODS: We prospectively recruited 90 patients referred for aortic valve replacement due to severe AS (73.3 ± 11.3 years, aortic valve area 0.7 ± 0.1 cm2, and 54/36 tricuspid/bicuspid), and 10 non-valvular disease controls. All the patients underwent echocardiography and 2D flow and 4D flow CMR. Peak flow velocity measurements were compared using Wilcoxon signed rank sum test and Bland-Altman analysis. RESULTS: 4D flow underestimated peak flow velocity in the AS group when compared with TTE (bias - 1.1 m/s, limits of agreement ± 1.4 m/s) and 2D flow (bias - 1.2 m/s, limits of agreement ± 1.6 m/s). The differences between values obtained by TTE (median 4.3 m/s, range 2.7-6.1 m/s) and 2D flow (median 4.5 m/s, range 2.9-6.5 m/s) compared to 4D flow (median 3.1 m/s, range 1.7-5.1 m/s) were significant (p < 0.001). The difference between 2D flow and TTE were insignificant (bias 0.07 m/s, limits of agreement ± 1.5 m/s). In non-valvular disease controls, peak flow velocity was measured higher by 4D flow than 2D flow (1.4 m/s, 1.1-1.7 m/s and 1.3 m/s, 1.1-1.5 m/s, respectively; bias 0.2 m/s, limits of agreement ± 0.16 m/s). CONCLUSIONS: CMR 4D flow significantly underestimates systolic peak flow velocity in patients with severe AS. 2D flow, in turn, estimated the AS velocity accurately, with measured peak flow velocities comparable to TTE.

Dental cone beam CT: An updated review.

Cone beam computed tomography (CBCT) is a diverse 3D x-ray imaging technique that has gained significant popularity in dental radiology in the last two decades. CBCT overcomes the limitations of traditional two-dimensional dental imaging and enables accurate depiction of multiplanar details of maxillofacial bony structures and surrounding soft tissues. In this review article, we provide an updated status on dental CBCT imaging and summarise the technical features of currently used CBCT scanner models, extending to recent developments in scanner technology, clinical aspects, and regulatory perspectives on dose optimisation, dosimetry, and diagnostic reference levels. We also consider the outlook of potential techniques along with issues that should be resolved in providing clinically more effective CBCT examinations that are optimised for the benefit of the patient.

Metal artifacts in intraoperative O-arm CBCT scans.

BACKGROUND: Cone-beam computed tomography (CBCT) has become an increasingly important medical imaging modality in orthopedic operating rooms. Metal implants and related image artifacts create challenges for image quality optimization in CBCT. The purpose of this study was to develop a robust and quantitative method for the comprehensive determination of metal artifacts in novel CBCT applications. METHODS: The image quality of an O-arm CBCT device was assessed with an anthropomorphic pelvis phantom in the presence of metal implants. Three different kilovoltage and two different exposure settings were used to scan the phantom both with and without the presence of metal rods. RESULTS: The amount of metal artifact was related to the applied CBCT imaging protocol parameters. The size of the artifact was moderate with all imaging settings. The highest applied kilovoltage and exposure level distinctly increased artifact severity. CONCLUSIONS: The developed method offers a practical and robust way to quantify metal artifacts in CBCT. Changes in imaging parameters may have nonlinear effects on image quality which are not anticipated based on physics.

Rotation and torsion of the left ventricle with cardiovascular magnetic resonance tagging: comparison of two analysis methods.

BACKGROUND: Left ventricle rotation and torsion are fundamental components of myocardial function, and several software packages have been developed for analysis of these components. The purpose of this study was to compare the suitability of two software packages with different technical principles for analysis of rotation and torsion of the left ventricle during systole. METHODS: A group of hypertrophic cardiomyopathy (HCM) patients (N = 14, age 43 ± 11 years), mutation carriers without hypertrophy (N = 10, age 34 ± 13 years), and healthy relatives (N = 12, age 43 ± 17 years) underwent a cardiovascular magnetic resonance examination, including spatial modulation of magnetization tagging sequences in basal and apical planes of the left ventricle. The tagging images were analyzed offline using a harmonic phase image analysis method with Gabor filtering and a non-rigid registration-based free-form deformation technique. Left-ventricle rotation and torsion scores were obtained from end-diastole to end-systole with both software. RESULTS: Analysis was successful in all cases with both software applications. End-systolic torsion values between the study groups were not statistically different with either software. End-systolic apical rotation, end-systolic basal rotation, and end-systolic torsion were consistently higher when analyzed with non-rigid registration than with harmonic phase-based analysis (p <  0.0001). End-systolic rotation and torsion values had significant correlations between the two software (p <  0.0001), most significant in the apical plane. CONCLUSIONS: When comparing absolute values of rotation and torsion between different individuals, software-specific reference values are required. Harmonic phase flow with Gabor filtering and non-rigid registration-based methods can both be used reliably in the analysis of systolic rotation and torsion patterns of the left ventricle.